O uso crescente de dispositivos móveis e o advento da Internet das Coisas têm demandado esforços para prover alternativas de comunicação sem fio. A utilização de sistemas óticos para a transmissão de dados apresenta-se como uma tecnologia promissora e complementar à comunicação por radiofrequência, especialmente devido aos desenvolvimentos consideráveis na tecnologia de iluminação por estado sólido e sua adoção em vários domínios. Os diodos de emissão de luz podem ser utilizados na promoção de comunicação por luz visível em ambientes internos e externos. Nos ambientes externos há inúmeras oportunidades a serem exploradas no que concerne aos Sistemas Inteligentes de Transporte, visto que os diodos de emissão de luz têm sido utilizados em luminárias públicas, semáforos e veículos. Esta pesquisa propôs o desenvolvimento e a avaliação de um sistema de comunicação por luz visível entre elementos da infraestrutura urbana e veículos, mais especificamente, luminárias públicas baseadas em diodos de emissão de luz e o modal de transporte público representado pelos ônibus que circulam em faixas exclusivas. A metodologia foi composta por simulação computacional e pela construção de um protótipo para auxiliar na validação das soluções propostas. O sistema complementar de comunicação sem fio por meio da luz proposto fornece pode fornecer subsídios à determinação do posicionamento preciso dos ônibus, suprindo as deficiências do sistema GPS em locais menos favoráveis à recepção de seus sinais em uma cidade. Essas informações auxiliam os usuários e os gestores do transporte público, atendendo alguns domínios de serviço em Sistemas Inteligentes de Transporte, de acordo com a norma ISO 14813. Os resultados obtidos nos testes com o protótipo, bem como, aqueles observados na simulação, comprovaram a viabilidade do sistema proposto, com o estabelecimento da comunicação entre luminária e ônibus, inclusive quando trafegando a 60 km/h. / The increasing use of mobile devices and the advent of the Internet of Things have called for efforts to provide alternatives for wireless communication. The use of optical systems for data transmission is a promising and complementary technology to radiofrequency communication, especially due to the considerable developments in solidstate lighting technology and its adoption in various domains. Light-emitting diodes can be used to promote visible light communication in indoor and outdoor environments. In outdoor environments there are numerous opportunities to be explored with regard to Intelligent Transport Systems, since light-emitting diodes have been used in public luminaires, traffic lights and vehicles. This research proposed the development and evaluation of a visible light communication system between elements of the urban infrastructure and vehicles, more specifically, public luminaires based on light-emitting diodes and the mode of public transport represented by buses that circulate in exclusive lanes. The methodology was composed by computational simulation and the construction of a prototype, to assist in the validation of the proposed solutions. The proposed complementary wireless communication system through light provides subsidies to determine the precise positioning of buses, supplying deficiencies of the GPS system in places less favorable to the reception of their signals in a city. This information helps the users and the managers of the public transport, attending some service domains in Intelligent Transport Systems, according to the ISO 14813 standard. The results obtained in the tests with the prototype, as well as those observed in the simulation, proved the feasibility of the proposed system, with the establishment of communication between luminaire and bus, even when traveling at 60 km/h.

Variable Speed Limits (VSL) are often used to improve traffic conditions on congested motorways. VSL can be implemented as mandatory or advisory. The objective of the thesis isto study in detail the effectiveness of VSL. The focus is on both, design parameters and conditions under which VSL are most effective. The MCS system on the E4 motorway inStockholm is used as a case study. The evaluation was conducted using empirical methods (including aggregate data from microwave sensors and other sources, and disaggregate data from a mobile study), and microscopic traffic simulation. The empirical analysis is based on before and after VSL data, including evaluation of individual measures of performance, and multivariate analysis in the form of the fundamental diagram, and speed-density relationships. The results from the empirical study are mixed with an indication that driver behavior has a strong impact on the effectiveness of the system. The microscopic traffic simulation analysis included the development of a platform for testing VSL and more generally motorway control strategies. The simulation platform was calibrated and validated with the empirical data and includes in addition to VSL, and Automatic Incident Detection (AID) system, the ALINEA ramp metering algorithm. The test-platform allows the testing of different control strategies and various combinations of control strategies, under different scenarios and in a controlled environment. The results from the simulation study indicate that driver compliance is an important factor and VSL performance quickly deteriorates as compliance rate drops. Hence, VSL should be implemented as mandatory instead of advisory. In addition, mandatory VSL can be effective both, under incident and moderately congested conditions. A combined VSL and ramp metering strategy can be most effective in reducing travel time, improving traffic conditions on the motorway. Furthermore, the results indicate that such a strategy also has the least impact on the flows entering the motorway from the ramps. / QC20100630

Algunas aplicaciones de carretera actuales, tales como los servicios de información al viajero, llamadas de emergencia automáticas, control de flotas o telepeaje eletrónico, requieren una solución de calidad al problema del posicionamiento de un vehículo terrestre, que funcione en cualquier entorno y a un coste razonable. Esta tesis presenta una solución a este problema, fusionando para ello la información procedente principalmente de sensores de navegación por satélite y sensores inerciales. Para ello emplea un nuevo filtro de fusion multisensorial IMM-EKF. El comportamiento del sistema ha sido analizado en entornos reales y controlados, y comparado con otras soluciones propuestas. Finalmente, su aplicabilidad al problema planteado ha sido verificada. / Road applications such as traveller information, automatic emergency calls, freight management or electronic fee, collection require a onboard equipment (OBE) capable to offer a high available accurate position, even in unfriendly environments with low satellite visibility at low cost. Specifically in life critical applications, users demand from the OBEs accurate continuous positioning and information of the reliability of this position. This thesis presents a solution based on the fusion of Global Navigation Satellite Systems (GNSS) and inertial sensors (GNSS/INS), running an Extended Kalman Filter combined with an Interactive Multi-Model method (IMM-EKF). The solution developed in this work supplies continuous positioning in marketable conditions, and a meaningful trust level of the given solution. A set of tests performed in controlled and real scenarios proves the suitability of the proposed IMM-EKF implementation, as compared with low cost GNSS based solutions, dead reckoning systems and single model extended Kalman filter (SM-EKF) solutions.

This application is created to provide valid and relevant travel information to travelers on their journey. The application is proposed as a demonstration for seamless communications in the VINNOVA-sponsored project PIITSA (Personal Information Intelligent Transport systems through Seamless communications and Autonomous decisions). The PIITSA-project is a cooperation between Blekinge Institute of Technology (BTH), Saab AB, SP Swedish National Testing and Research Institute and Swedish Road Administration region Stockholm. The project is going on under three years, and the goal is to define communication and decision functions which will make it easier for ITS-applications (Intelligent Transport Systems and Services) that have the need of supplying personalised information. This project presents a solution to the question “How do I get from point A to point B in any case”. All that the user needs is a PDA with the application installed and being able to connect to the service via a mobile network. If the user has specified a route in the application, then the user will receive up-to-date information on how to get to his destination. This information is presented on the user’s PDA. If something happens on the current route, then the user will get an automatic message sent to him presenting the problem and give him a new travel route. Thanks to this the user won’t be stuck in the traffic problem and will probably reach its destination in time. / Examensarbetet tog fram en demonstrationstjänst för det VINNOVA-sponsrade projekt PIITSA (Personlig Information i Intelligenta Transportsystem genom Sömlös kommunikation och Autonoma beslut). Den används på en handdator och hjälper resenrärer "att komma från A till B i alla fall" genom att ge möjlighet att söka eller lägga in reserutter och övervaka aktuell trafikinformation i samband med dessa rutter, främst avseende kollektivtrafik i Stockholmsområdet. Mervärdet består i att resenären blir varnat automatiskt om någonting händer längs de valda rutterna och ges möjlighet att få en ny rutt. Applikationen kan användas i skarp läge. / Primary contact: Markus Fiedler, +46 708 537339

Die Verkehrstelematik, im Englischen als Intelligent Transport Systems (ITS) bezeichnet, kann durch die Verbindung von Telekommunikation, Informatik und Automatisierung wesentlich zur Sicherung der Mobilität beitragen. Dabei kann durch Erfassen, Übermitteln, Verarbeiten und Darstellen von Verkehrsdaten in Telematiksystemen der Verkehr prognostiziert, gesteuert, gelenkt, geleitet und organisiert werden. An der Fakultät Verkehrswissenschaften „Friedrich List“ der TU Dresden beschäftigt sich das Institut für Verkehrstelematik mit verkehrstelematischen Fragestellungen und Anwendungen. An der Professur für Verkehrsleitsysteme und -prozessautomatisierung stehen dabei Lehre und Forschung in den Themengebieten Verkehrs- und Betriebsleitsysteme, Verkehrssteuerungstechnik, Verkehrsprozessautomatisierung und Verkehrsmanagement sowohl des schienengebundenen als auch des straßengebundenen Verkehrs im Vordergrund. Um aktuelle Forschungs- und Entwicklungsergebnisse einem breiten Fachpublikum verfügbar zu gestalten, veröffentlicht die Professur mit der Schriftenreihe „Verkehrstelematik“ in loser Folge interessante Forschungsthemen und Beitrage aus ihrem unmittelbaren Wirkungsfeld, der Verkehrstelematik allgemein und darüber hinaus auch Beitrage zu interdisziplinär aufgestellten Fragestellungen. Damit verbunden ist die Hoffnung, dass die aktuellen Forschungsergebnisse in die Praxis einfließen und dabei helfen, den Verkehr flüssiger, ressourcenschonender und effizienter zu gestalten. / Traffic telematics and Intelligent Transport Systems (ITS) can significantly contribute to securing mobility by combining telecommunications, information technology and automation. By capturing, transmitting, processing and displaying traffic data in traffic emblematic systems, the traffic can be predicted, controlled, directed, managed and organized. The Institute of Transport Telematics at the Faculty of Traffic Sciences 'Friedrich List' of the Technische Universität Dresden (TUD) deals with traffic telematics issues and applications. Teaching and research in the fields of traffic guidance and operation control systems, traffic control technology, process automation and traffic management of both rail-bound and road-bound traffic are in the focus of the Chair of Traffic Control and Process Automation. In order to make current research and development results available to a broad professional audience, the professorship publishes interesting research topics and contributions from their immediate field of action, namely traffic telematics in general, and also contributions to interdisciplinary issues with the series 'Verkehrstelematik'. Linked to this is the hope that current research findings will be put into practice and help to make traffic smoother, Eco-friendly and more efficient.

Der Paradigmenwechsel zur Entwicklungsmethodik innerhalb verteilter Kommunikationssysteme schlägt sich auch in der Telematik zum Anwendungspotential und Systemkomplexität nieder. Dies liefert eine neue Auffasung dessen, was den transparenten Datenkanal ausmacht.

Der Paradigmenwechsel zur Entwicklungsmethodik innerhalb verteilter Kommunikationssysteme schlägt sich auch in der Telematik zum Anwendungspotential und Systemkomplexität nieder. Dies liefert eine neue Auffasung dessen, was den transparenten Datenkanal ausmacht.

Vehicular ad hoc networks (VANETs) are a hot topic in the intelligent transport system (ITS) area. The introduction of wireless communications between vehicles will enable many useful applications to enhance road traffic safety as well to increase efficiency. The standardization of IEEE 802.11p, being an amendment to IEEE 802.11 intended for VANETS, faces many challenges. In Europe a 30 MHz spectrum at 5.9 GHz have been dedicated for ITS and this spectrum has to be used to its full potential. For this reason this thesis compares a 20 MHz wide frequency channel with a 10 MHz wide through measurements using 802.11p hardware. The measurements were conducted on a highway with relative speeds of up to 240 km/h. The results from these initial measurements show that a 20 MHz channel does not perform worse than a 10 MHz channel despite the high relative speeds and large metal signs scattering the signals. What enabled this thesis to do the measurements was Halmstad University‟s participation in the Grand Cooperative Driving Challenge (GCDC) 2011. In GCDC nine teams mostly from Europe competed in having the vehicle that had the best behaviour in a platoon of vehicles using cooperative adaptive cruise control (CACC), the CACC algorithm controlled the vehicles‟ acceleration and breaking autonomously based on in-vehicle sensors and communicated messages between the vehicles in the platoon using 802.11p. This thesis implemented the communication part of Halmstad University‟s vehicle. The challenge was held in Helmond, Holland, May 14-15, 2011. Halmstad University‟s team finished in second place. / CoAct

Road transport mobility continues to be a challenge to the City of Johannesburg (CoJ)’s economy in general. Traffic signals, their remote monitoring and control systems are the current implemented Intelligent Transport Systems (ITS), but daily systematic faults and maintenance uncertainties on such systems decrease the effectiveness of traffic engineers’ intersections optimization techniques. Inefficient electrical power supply to such ITS is a challenge, with conditional power cuts and fluctuations, uncertainties on traffic control system faults. Another factor leading to the problem is the communication channel which is using traditional modems which are not reliable. Reporting through both customer complaints and such unreliable remote monitoring systems makes maintenance to be ineffective. In this dissertation, the factors leading to the faults and uncertainties are considered. The proposed solution considers the important concerns of ITS, such as electrical power source performance optimization technique, road traffic control systems compatibility and communications systems / Electrical and Mining Engineering / M. Tech. (Electrical Engineering)

Dans ce travail, nous nous focalisons sur l’ajout de contraintes temporelles dans les Bases de Données de Capteurs Sans Fil (BDCSF). La cohérence temporelle d’une BDCSF doit être assurée en respectant les contraintes temporelles des transactions et la validité temporelle des données, pour que les données prélevées par les capteurs reflètent fidèlement l’état réel de l’environnement. Cependant, les retards de transmission et/ou de réception pendant la collecte des données peuvent conduire au non-respect de la validité temporelle des données. Une solution de type bases de données s'avère la plus adéquate. Il faudrait pour cela faire coïncider les aspects BD traditionnelles avec les capteurs et leur environnement. À cette fin, les capteurs déployés au sein d'un réseau sans fils sont considérés comme une table d'une base de données distribuée, à laquelle sont appliquées des transactions (interrogations, mises à jour, etc.). Les transactions sur une BD de capteurs nécessitent des modifications pour prendre en compte l'aspect continu des données et l'aspect temps réel. Les travaux réalisés dans cette thèse portent principalement sur trois contributions : (i) une étude comparative des propriétés temporelles entre une collecte périodique des données avec une base de données classique et une approche de traitement des requêtes avec une BDCSF, (ii) la proposition d’un modèle de traitement des requêtes temps réel, (iii) la mise en œuvre d’une BDCSF temps réel, basée sur les techniques décrites dans la deuxième contribution. / In this thesis, we are interested in adding real-time constraints in the Wireless Sensor Networks Database (WSNDB). Temporal consistency in WSNDB must be ensured by respecting the transaction deadlines and data temporal validity, so that sensor data reflect the current state of the environment. However, delays of transmission and/or reception in a data collection process can lead to not respect the data temporal validity. A database solution is most appropriate, which should coincide with the traditional database aspects with sensors and their environment. For this purpose, the sensor in WSN is considered as a table in a distributed database, which applied transactions (queries, updates, etc.). Transactions in a WSNDB require modifications to take into account of the continuous datastream and real-time aspects. Our contribution in this thesis focus on three parts: (i) a comparative study of temporal properties between a periodic data collection based on a remote database and query processing approach with WSNDB, (ii) the proposition of a real-time query processing model, (iii) the implementation of a real time WSNDB, based on the techniques described in the second contribution.