Introdução- Obstrução das vias aeríferas superiores associadas a mudanças nos padrões de sono, estão diretamente relacionados a problemas de crescimento e aprendizagem, o que interfere com a qualidade de vida das crianças com este quadro. Métodos de expansão maxilar já mostraram efeito favorável sobre a função respiratória. Aparelhos removíveis intra-orais têm sido usados no tratamento do ronco e apneia do sono, buscando reequilibrar a postura da mandíbula e da língua para melhorar a função respiratória. O objetivo deste trabalho é avaliar as dimensões da faringe, o crescimento craniofacial e os sintomas respiratórios obstrutivos em crianças com ronco e aumento das tonsilas faríngeas e palatinas em tratamento com um aparelho ortodôntico e ortopédico bucal. Métodos- Quarenta crianças de 6 a 9 anos de idade com tonsilas faríngeas e palatinas graus 3 e 4 e apresentando maxila atrésica e sobressaliência anterior foram divididos em dois grupos aleatórios: 24 pacientes tratados com o aparelho oral e 16 controles não tratados. As dimensões da faringe foram medidas por faringometria acústica. Cefalometria avaliou o crescimento facial, incluindo os valores relacionados com a apnéia do sono. Os pais preencheram questionários sobre os sintomas respiratórios da criança. Os pacientes foram reavaliados após 6 meses, em ambos os grupos. Resultados: A faringometria acústica confirmou um aumento volumétrico de 3,1 cm3 (d.p. ± 2,5) na faringe, no grupo de estudo e uma redução volumétrica de -1,2 cm3 (d.p. ± 1,3) no não tratado (p <0,001). A área mínima de colapsibilidade no grupo de estudo apresentou incremento de 1,1 cm2 (dp ± 0,2) para 1,3 cm2 (d.p. ± 0,2) e uma redução no grupo controle de 1,5 cm2 (dp ± 0,3) para 1,3 cm2 (d.p. ± 0,3) estatisticamente significante (p <0,001). A cefalometria comprovou crescimento craniofacial mais favorável no grupo de estudo, em comparação aos controles, incluindo os valores relacionados a apnéia do sono, como ANB, MMPA e H-ML (p <0,001) . O questionário de sintomas confirmou uma melhoria no padrão de respiração e sono no grupo tratado. Conclusão- As crianças que foram submetidos a esse protocolo de tratamento apresentaram aumento de dimensões da faringe, direção de crescimento mais favorável, e uma melhora na respiração e qualidade do sono / Introduction- Airway obstruction due to associated changes in sleep patterns are directly related to problems of growth and learning, which interfer with the quality of life for these children. Maxillary expansion methods have shown favorable effect on respiratory function. Intra-oral removable appliances have been used in the treatment of snoring and sleep apnea, seeking to rebalance the posture of the jaw and tongue to improve breathing function. The purpose of this thesis is evaluate the facial growth, pharyngeal dimensions and respiratory symptoms in snoring children with enlarged tonsils and adenoids under treatment with an orthodontic and orthopedic oral appliance. Methods- Forty snoring children ages 6 to 9 years old with tonsil and adenoid enlargement grades 3 and 4 and presenting constricted maxilla were divided into two randomized groups: 24 patients treated with the oral appliance and 16 untreated controls. Pharyngeal size was measured by acoustic pharyngometry. Cephalometry evaluated the facial growth including values related to sleep apnea. Pharyngeal size was measured by acoustic pharyngometry. Parents filled out questionnaires about their child\'s respiratory symptoms. Patients were re-evaluated after 6 months, in both groups Results- Acoustic pharyngometry confirmed a volumetric gain of 3.1 cm3 (s.d. ±2.5) in the pharynx at the study group and a volumetric reduction of -1.2 cm3 (s.d. ±1.3) at the untreated (p<0.001). The minimum area on collapsibility at the study group showed an increment from1.1 cm2 (s.d.±0.2) to 1.3 cm2 (s.d.±0.2) and a reduction on the control group from 1.5 cm2 (s.d.±0.3) to 1.3 cm2 (s.d.±0.3) statistically significant (p<0.001). Cephalometry showed a more favorable facial growth on the study group compared to controls, including values related to sleep apnea prediction such as ANB, MMPA and H-ML (p<0.001). The symptoms questionnaire confirmed an improvement on the breathing pattern at the group treated. Conclusions- Children who underwent this treatment protocol presented more favorable growth direction, enlargement of pharyngeal dimensions, and an improvement in breathing and sleep

Submitted master thesis deals with stress - strain analysis of jaw, with dental implant. The implant serve as a suitable pillar for crown or dental bridge, when one or more teeth are lost. The project is oriented on BOI (basale - oseo - integrable) dental implant type, which is produced by DENTALIHDE company. Stress – strain condition of the mandible system with implant have been established by computational simulation, with use of the final elements method. Important part of down jowl is simulated on with EDS and EDDS applied types of implants. After implementation the implant begins to heal. Therefore the special attention is paid to stress - strain states on various level of osteointegration. There is a detail description of production of single part computational model and his solving in the master thesis. Presentation of large chapter with results and subsequent alteration stress - strain analysis is part of the master thesis. Program SolidWorks 2005 was used to create the geometric model. Computational model and the actual solving was accomplished with use of ANSYS 11.0 and ANSYS Wor-kbench systems.

Orthognatic surgery deals with congenital and acquired dentoalveolar or skeletal deformities of the face. An unfavourable downward rotation of a mandible and posterior vertical maxillary excess cause an anterior open bite, which is characterized by excessive anterior facial height in the lower third, a gap between the incisors in maximal occlusion and a large mandibular angle. Osteotomy (mainly Le Fort I osteotomy or bilateral sagittal split osteotomy of the mandibular ramus - BSSO), ostectomy or distraction osteogenesis are performed to correct the orthognatic deformities. Osteosynthetic materials based on titanium or bioresorbable materials are used in the form of miniplates with monocortical screws, or bicortical screws are utilized to fix the bony fragments. Stability of the new jaws position is the main criterion for success. Relapse causes a loss of occlusion and consequently functional and aesthetic disorders. Relapse consists of skeletal and dental factors. Skeletal relapse is usually divided into early and long-term relapse. BSSO with counter-clockwise (CCW) rotation of the occlusal plane alone was traditionally considered to be the least stable treatment method. Some authors suggest the use of two miniplates on each side of the osteotomy, but we have not found scientific proof of the...

This thesis deals with the fixation of lower jaw with bone tissue defect using commercially produced fixator. Large defects of bone tissue are mainly caused due to the removal of bone tissue affected by tumor. These topics have been researched on the basis of the literature. Subsequently, stress strain analysis of the lower jaw with the applied fixation plate was performed. This analysis was solved by using computational modeling with variational approach, ie the finite element method. The work also describes in detail the procedure of creating model of geometry, model of material, model of boundary conditions and loads with subsequent solution of several computational models. The stress strain analysis was done for lower jaw with varying size of the removed bone tissue with applied reconstruction plate made of CP-Ti Grade 4 and for the lower jaw with the plate, which is made of -Ti-Mo. Finally, the influence of the mechanical properties of the callus during formation of new bone tissue (callus healing) on the stress and deformation of the solved system was evaluated.

Orthognatic surgery deals with congenital and acquired dentoalveolar or skeletal deformities of the face. An unfavourable downward rotation of a mandible and posterior vertical maxillary excess cause an anterior open bite, which is characterized by excessive anterior facial height in the lower third, a gap between the incisors in maximal occlusion and a large mandibular angle. Osteotomy (mainly Le Fort I osteotomy or bilateral sagittal split osteotomy of the mandibular ramus - BSSO), ostectomy or distraction osteogenesis are performed to correct the orthognatic deformities. Osteosynthetic materials based on titanium or bioresorbable materials are used in the form of miniplates with monocortical screws, or bicortical screws are utilized to fix the bony fragments. Stability of the new jaws position is the main criterion for success. Relapse causes a loss of occlusion and consequently functional and aesthetic disorders. Relapse consists of skeletal and dental factors. Skeletal relapse is usually divided into early and long-term relapse. BSSO with counter-clockwise (CCW) rotation of the occlusal plane alone was traditionally considered to be the least stable treatment method. Some authors suggest the use of two miniplates on each side of the osteotomy, but we have not found scientific proof of the...