The Simpson Mountains have long been of economic interest and have renewed interest in their potential value. Field mapping of the project area redefined structural relationships between stratigraphic units. Geometric and kinematic analysis of structures in the Simpson Mountains show the range is deformed by the three most recent tectonic events: the Sevier Orogeny, the Laramide Orogeny, and Basin and Range Extension. Laramide structures define the range with a significant E-W normal fault and an E-W thrust fault, which are both likely related to Eocene-age igneous intrusions. Principal component analysis (PCA) of regional quartzite X-ray Fluorescence (XRF) data resulted in distinctive populations between the Eureka Quartzite and the Mutual and Prospect Mountain Quartzites. The PCA was paired with petrographic analysis of regional quartzites where samples were diagnostically classified to help validate the PCA results. XRF analysis of volcanic rocks show volcanic arc origin. 40Ar/39Ar dating of the volcanic rocks associated with the intrusions yield new ages of 34.09±0.10 to 37.05±0.06 Ma and 19.11±0.02 to 19.18±0.03. Lithostratigraphy of the map area was validated by identification of fossil samples. The Eocene intrusions are likely sources of mineralization in the range along older Sevier structures.

No description available.

No description available.

Applications in paleontological research are far from being limited to taxonomic collection and identification. Nor is such research limited to working solely on fossil data. Actualistic paleontology is the study of modern or recent organisms and processes to better understand those of the past. The bulk of this body of research falls under the category of actualistic paleontology, and examines geochronological methods and error biases in dating biological specimens ranging in age from modern to thousands of years old. Although such methods are arguably not perfect, error rates of ± a few hundred to few thousand years can be extremely important when considering ecological relationships among both Holocene taxa and time-averaged paleocommunities, but quite diminished when considering implications on more traditional dating techniques for ancient strata. Regardless, understanding implications of time resolution is important in analyses of and comparisons between any biological dataset. The following chapters are united by quantitative and statistical management of data with varying levels of temporal resolution, and represent four manuscripts that either are in press or soon to be submitted for publication. / Ph. D.

A belt of Early Proterozoic rocks crops out in the Cottonwood Cliffs area, northwest Arizona. The belt contains an eastern and a western assemblage separated by the Slate Mountain fault. The western assemblage consists of mafic to felsic metavolcanic rocks, metapelites, and metaconglomerates. The eastern assemblage consists of phyllites, felsic to intermediate metavolcanic rocks, metagraywackes, and metagabbro bodies. The belt is bounded to the east by foliated granodiorite. The Valentine granite intruded the belt on the west and north. Steeply-plunging lineations and fold axes, and northeast-trending vertical foliation dominate the structural fabric. The regional elongation direction is near-vertical, as indicated by mineral and pebble lineations, and is parallel to fold axes. Although only one deformational event is evident, the intensity of that event may have obliterated evidence of any earlier deformation. Tertiary basalts and the Peach Springs Tuff locally overly the metamorphic rocks. Cenozoic normal faults in the area are mostly of minor displacement.

Two taxa of amphibians, five taxa of reptiles, and eighteen taxa of mammals were collected by screen-washing sediments from the upper Bidahochi Formation at White Cone peak, northeastern Arizona. Five new species of mammals were recovered. They include Perognathoides bidahochiensis (Heteromyidae), Bensonomys yazhi (Cricetidae), Bensonomys bradyi (Cricetidae), Paronychomys alticuspis (Cricetidae), and Martes (Plionictis) repenningi (Mustelidae). Bensonomys yazhi and Bensonomys bradyi are close to the stem of Central and South Americal hesperomyine radiation. The radiation began in the southwest United States and Mexico during the Hemphillian. The middle member of the Bidahochi Formation is dated at 6.7 m. y. by a basalt from Roberts Mesa. The paleomagnetic data and the White Cone local fauna support this middle Hemphillian date.

The quantitative estimation of reservoir properties directly from seismic data is a major goal of reservoir characterization. Integrated reservoir characterization makes use of different varieties of well and seismic data to construct detailed spatial estimates of petrophysical and fluid reservoir properties. The advantage of data integration is the generation of consistent and accurate reservoir models that can be used for reservoir optimization, management and development. This is particularly valuable in mature field settings where hydrocarbons are known to exist but their exact location, pay, lateral variations and other properties are poorly defined. Recent approaches of reservoir characterization make use of individual seismic attributes to estimate inter-well reservoir properties. However, these attributes share a considerable amount of information among them and can lead to spurious correlations. An alternative approach is to evaluate reservoir properties using multiple seismic attributes. This study reports the results of an investigation of the use of multivariate seismic attributes to predict lateral reservoir properties of gross thickness, net thickness, gross effective porosity, net-to-gross ratio and net reservoir porosity thickness product. This approach uses principal component analysis and principal factor analysis to transform eighteen relatively correlated original seismic attributes into a set of mutually orthogonal or independent PC??s and PF??s which are designated as multivariate seismic attributes. Data from the N-sand interval of Vermilion Block 50 field, Gulf of Mexico, was used in this study. Multivariate analyses produced eighteen PC??s and three PF??s grid maps. A collocated cokriging geostaistical technique was used to estimate the spatial distribution of reservoir properties of eighteen wells penetrating the N-sand interval. Reservoir property maps generated by using multivariate seismic attributes yield highly accurate predictions of reservoir properties when compared to predictions produced with original individual seismic attributes. To the contrary of the original seismic attribute results, predicted reservoir properties of the multivariate seismic attributes honor the lateral geological heterogeneities imbedded within seismic data and strongly maintain the proposed geological model of the N-sand interval. Results suggest that multivariate seismic attribute technique can be used to predict various reservoir properties and can be applied to a wide variety of geological and geophysical settings.

The quantitative estimation of reservoir properties directly from seismic data is a major goal of reservoir characterization. Integrated reservoir characterization makes use of different varieties of well and seismic data to construct detailed spatial estimates of petrophysical and fluid reservoir properties. The advantage of data integration is the generation of consistent and accurate reservoir models that can be used for reservoir optimization, management and development. This is particularly valuable in mature field settings where hydrocarbons are known to exist but their exact location, pay, lateral variations and other properties are poorly defined. Recent approaches of reservoir characterization make use of individual seismic attributes to estimate inter-well reservoir properties. However, these attributes share a considerable amount of information among them and can lead to spurious correlations. An alternative approach is to evaluate reservoir properties using multiple seismic attributes. This study reports the results of an investigation of the use of multivariate seismic attributes to predict lateral reservoir properties of gross thickness, net thickness, gross effective porosity, net-to-gross ratio and net reservoir porosity thickness product. This approach uses principal component analysis and principal factor analysis to transform eighteen relatively correlated original seismic attributes into a set of mutually orthogonal or independent PC??s and PF??s which are designated as multivariate seismic attributes. Data from the N-sand interval of Vermilion Block 50 field, Gulf of Mexico, was used in this study. Multivariate analyses produced eighteen PC??s and three PF??s grid maps. A collocated cokriging geostaistical technique was used to estimate the spatial distribution of reservoir properties of eighteen wells penetrating the N-sand interval. Reservoir property maps generated by using multivariate seismic attributes yield highly accurate predictions of reservoir properties when compared to predictions produced with original individual seismic attributes. To the contrary of the original seismic attribute results, predicted reservoir properties of the multivariate seismic attributes honor the lateral geological heterogeneities imbedded within seismic data and strongly maintain the proposed geological model of the N-sand interval. Results suggest that multivariate seismic attribute technique can be used to predict various reservoir properties and can be applied to a wide variety of geological and geophysical settings.

El análisis de estructuras paleokársticas ha atraído, en los últimos años, el interés de numerosos investigadores a la información que aportan a la geología aplicada y la paleogeomorfología. Estudios recientes se han centrado en la aplicación de técnicas de exploración del subsuelo debido a la escasez de afloramientos. En la presente Memoria se analizan íntegramente las formas de hundimiento pretéritas que afloran discontinuamente con gran detalle, en los acantilados de las costas meridional (plataforma de Llucmajor) y oriental (plataforma de Santanyí) de Mallorca, a lo largo de más de 75 km de línea de costa, afectando a las rocas carbonáticas del Mioceno superior. El estudio se ha centrado en la distribución geográfica, evolución geológica y las características geomorfológicas de estos paleocolapsos, con especial énfasis en su génesis, su relación con la arquitectura y distribución de las facies, así como en las formas y productos asociados.Los paleocolapsos han sido descritos en su contexto litoestratigráfico y estructural dentro de las mencionadas plataformas carbonáticas, siendo este trabajo una contribución al conocimiento del karst en estas unidades geológicas y su relación con las fluctuaciones marinas. La karstogénesis queda reflejada en estas formas pretéritas donde se han observado depósitos y formas de disolución ligadas a la dinámica kárstica controlada, en el caso que nos ocupa, por las fluctuaciones del nivel del mar: brechas, sedimentos detríticos, cementos, así como distintos tipos y volúmenes de porosidad. La mayor parte de estas formas (sobre un total de 177), cuyas dimensiones en sección varían desde pocos metros hasta afloramientos con 28 m de altura y más de 100 m en la horizontal, se ubican en la plataforma de Santanyí a excepción de dos estructuras ubicadas en la plataforma de Llucmajor.El análisis geológico y su relación con los paleocolapsos muestra como en la plataforma de Llucmajor éstos afectan a las facies de la Unidad Complejo Arrecifal (facies de back reef y frente arrecifal). Sin embargo, en la plataforma de Santanyí, los paleocolapsos afectan tanto a parte del Complejo Arrecifal (facies de back reef), como a la totalidad de la Unidad Calizas de Santanyí. A partir del estudio de la arquitectura de facies del Complejo Arrecifal en la plataforma de Llucmajor se ha establecido el modelo deposicional en la plataforma de Santanyí. Sin embargo, ésta última se encuentra compartimentada como consecuencia del control de dos fallas en dirección de orientación E-O en S'Algar y Na Magrana, donde se localiza el contacto entre facies de lagoon externo y talud arrecifal. No obstante, la cartografía y análisis de los lineamientos en dicha plataforma ha permitido identificar dos familias principales con dos direcciones dominantes; NE-SO y NO-SE, siendo la dirección E-O menos representativa. Se han observado fracturas distensivas y pequeñas fallas inversas miocenas asociadas al proceso de colapso, así como fracturas y fallas postmiocenas, y fracturas cuaternarias.El estudio de la geometría en sección de los paleocolapsos pone de relieve que la formas en "V", "U" y conoidales son las más comunes. Han sido identificadas dos partes diferentes en un paleocolapso tipo: una inferior donde se observa la paleocavidad ubicada en la base del paleocolapso (lagoon externo y/o frente arrecifal), con una geometría irregular de dimensiones entre 1 m y 9 m rellena por sedimentos adyacentes y suprayacentes a ésta; y una parte superior, coincidente con los bordes de la estructura (lagoon interno/Calizas de Santanyí) buzando con inflexión conoidal hacia la paleocavidad.Se han identificado cuatro tipos de brechas (crackle, crackle-laminae-split, de mosaico y caótica) en las estructuras de paleocolapso asociadas cada una de ellas a distintos niveles estratigráficos y, en algunos paleocolapsos, con una gradación vertical y lateral. Son característicos de estos depósitos los sedimentos detríticos (matriz) y los cementos asociados (vadosos y freáticos). En general, el cemento domina sobre la matriz en la zona inferior del paleocolapso, mientras que por encima, es la matriz la que domina sobre el cemento. El análisis por difracción de Rayos X de la matriz indica para la muestra total que la calcita es el mineral principal y el cuarzo el mineral secundario. En la fracción arcilla, la moscovita, la illita y la caolinita son los minerales más comunes. De ello, junto con el estudio de láminas delgadas en estos depósitos, donde se han observado tamaños de grano en el cuarzo superior a 2 mm, se deduce un ambiente de sedimentación subsuperfical y otro subaéreo de lo que se extrae un origen, proceso de transporte y sedimentación diversos, así como la evolución cristaloquímica en determinados minerales. Los cementos son de naturaleza calcítica, con contenidos relativamente altos en magnesio para los freáticos y bajos para los vadosos. Para el estudio de la porosidad en los paleocolapsos se ha procedido a su clasificación en dos tipos principales, interclasto e intraclasto, a partir de las cuales se ha estudiado la macro y microporosidad. La brecha caótica de colapso es la que presenta volúmenes de porosidad más elevados y tipologías diversas. El análisis de isótopos estables muestra una gran homogeneidad entre la composición isotópica de los cementos, con valores en δ18O y δ13C ligeros, lo que indica condiciones análogas de precipitación, con dominio de aguas dulces sobre las saladas. Tanto la marca del oxígeno como del carbono parecen indicar que los cementos se depositaron en un período interglaciar coincidente con algún estadio isotópico impar.El estudio de la arquitectura de facies de la plataforma de Llucmajor ha permitido elaborar un modelo genético de ocurrencia para los paleocolapsos y su ubicación espacio-temporal. Dicho modelo, ha sido corroborado por la relación entre la distribución de facies y paleocolapsos en la plataforma de Santanyí, por la observación en algunos paleocolapsos de sedimentos a techo de la Unidad Calizas de Santanyí que sellan la estructura, así como por el tipo de brechas características de colapsos sinsedimentarios (brecha crackle-laminae-split), que muestran una deformación dúctil de los materiales cuando éstos no estaban completamente consolidados, dando lugar a formas laxas de bajo ángulo. Los procesos genéticos que dieron lugar a los paleocolapsos kársticos están directamente relacionados con la alta frecuencia de fluctuación del nivel del mar durante el Mioceno superior, la misma que controló la arquitectura de facies y la posición del nivel freático. Las oscilaciones del nivel freático causaron la alternancia de dominios freáticos y vadosos así como, de agua dulce y agua salada en la interfase, provocando la disolución de los parches coralinos y el posterior hundimiento del techo de las cavidades. El estudio integral de todos estos aspectos junto con el análisis de una red de paleocauces y una playa fósil, ha permitido realizar una reconstrucción paleogeográfica desde el Messiniense en la plataforma de Santanyí e identificar estructuras de paleocolapso postmiocenas y cuaternarias. Con estos datos se ha procedido a la comparación de los paleocolapsos kársticos con otras estructuras similares en el País Vasco y Las Islas de Malta, de lo que se extraen analogías y diferencias, determinadas fundamentalmente por el orden de fluctuación del nivel del mar. Por último, se discute el papel de los paleocolapsos kársticos como elementos que contribuyen en cierta medida a la ocurrencia de hidrocarburos en plataformas carbonáticas, pudiendo ser excelentes reservorios debido al gran número de afloramientos, el volumen de roca afectada y a su elevada porosidad y permeabilidad. / Paleokarst tend to differ from studies of recent and modern karst landforms though is important the genetic understanding of the karst processes for analysis a paleokarst structure. Paleokarst systems form an important class of carbonate record and they have a pronounced lateral and vertical spatial complexity that results from a complex history of formation. Most of the known karst systems are epigenetic and they are the result of near-surface karst processes during periods of subaerial exposure and latter burial compaction and diagénesis. Scale, porosity types and spatial complexities of these paleokarst systems depends on the carbonate rock solubility, paleoclimatic conditions, lowering of base level either by tectonic uplift or sea-level fall and time of subaerial exposure. Uplift, in addition, commonly induces fracturing and faulting that further control karst development. Ascertaining and predicting paleokarstic heterogeneities within carbonate rocks are strategic to fluids field development and optimum production. With current subsurface methods, however, most of the smaller-scale stratigraphic architecture and diagenetic facies are difficult to define. Predictive models for exploration and development are best made from outcrop studies of well-exposed examples. Accuracy for prediction of these models depends on the detailed understanding of the genetic factors controlling their geometries, scale, pore networks and spatial complexities of these potential karstic store. Miocene carbonates (Upper Tortonian-Lower Messinian) in Mallorca Island are composed of reefal (Reef Complex) and shallow water carbonates (Santanyí Limestone) that prograded across platforms surrounding paleoislands. The contact between the Reef Complex and the Santanyí Limestone is a subaerial erosion surface with paleokarst features. The shallow-water carbonates beds both the lagoonal beds of the Reef Complex and basal beds of the Santanyí Limestone, are affected by paleocollapse structures produced by roof collapse of caverns developed in the underlying Reefal Complex. These paleocollapse structures affecting to the carbonate platform allows to propose a genetic model to explain the origin of these paleosink, that are related to early diagenetic processes induced by high-frequency sea-level fluctuations, the same sea-level fluctuations that controlled the facies architecture of the carbonate platforms.Cartography and study of lineaments and fractures on Santanyí Platform have permitted identified two principals groups with two main directions: NE-SO and NO-SE. Have been observed distensiva fractures and Miocene small inverse faults related with de breackdwon phenomena. Moreover, postmiocenes and quaternary faults and fractures have been recognized.The geometry of paleocollapse structures is commonly (in section) as "V", "U" or funnel. The size is variable from few meters of long to thousands meters, and few meters of weigh to thirteen meters. Breccias has been classified as crackle, crackle-laminae-split, mosaic and chaotic types. Chaotic breccias grade from matrix-free, clasts-supported breccias to matrix-supported breccias. The matrix mineralogy is compose in the total sample for calcite in the major part and quartz in less quantity. However, same structures present quartz as principal mineral. To the clay fraction, caolinite, illite and moscovite are the most general mineral present.The geochimical sediment (carbonate) are filling a part of interclaste breccias porosity. This is commonly phreatic speleothems. Isotopic studies of this sediments show δ18O and δ13C contents negatives. This fact could indicate a fresh water environment deposition