No description available.

The sorption/desorption behaviour of n-hexane in high molarmass linear polyethylene (PE) and branched PEs with 0.39 and5.09 hexyl branches per 100 main chain C atoms andcrystallinities between 4 and 82% at 298 K has been studied.Crystal core contents determined by Raman spectroscopy werealways lower than those determined by density measurements. Then-hexane solubilities in the copolymers depended in anon-linear manner on the content of penetrable polymercomponent and were lower for homogeneous copolymers than forheterogeneous copolymers at the same contents of penetrablecomponent. The solubility of hexane in the linear PE sampleswas proportional to the volume fraction of the penetrablepolymer and the solubility was low in comparison with that ofthe branched PE of the same crystallinity. TheCohen-Turnbull-Fujita (CTF) free volume theory was capable ofdescribing the desorption process in the PEs studied. Theconcentration dependence of the thermodynamic diffusivitypredicted by the CTF free volume theory was confirmed by thedata obtained by the differential method, and the differencesbetween the results obtained by the integral and differentialmethods were within the margins of experimental error. Thedependence of the fractional free volume of the penetrablephases on the phase composition suggests that mass transporttakes place from the liquid-like component to the interfacialcomponent and that the penetrant molecules are trapped at theinterfacial sites. The linear PE samples showed a physicallyrealistic trend with a decrease in the geometrical impedancefactor (t) with decreasing degree of crystallinity, whereas theopposite trend was obtained for the copolymers. The decrease int with increasing crystallinity in the copolymers may beexplained by the presence of wide crystal lamellae in the lowcrystallinity samples. A novel melt-extrusion method was used to createcircumferential chain orientation in pipes of crosslinked PE.The microstructure of the pipes was characterized usingdifferential scanning calorimetry (DSC), density measurements,X-ray diffraction, infrared dichroism and contractionmeasurements. The mechanical properties were assessed byuniaxial tensile tests. The maximum degree of circumferentialorientation was obtained at the inner wall of the orientedpipe. The oriented pipe material exhibited a 5-15% higherdegree of crystallinity and a greater crystal thickness thanconventionally crosslinked pipe. The circumferential and axialmoduli of the oriented, crosslinked pipe were greater than thecorresponding moduli of the non-oriented crosslinked pipe. Blends of single-site materials of linear PE andethyl-branched PE were prepared using solution- and melt-mixingmethods. The thermal properties of the blends were studied byDSC and results obtained by the two mixing methods werecompared. Data obtained for heats of melting andcrystallization, melting and crystallization peak temperaturesand melting and crystallization temperature profiles wereessentially the same for the samples obtained by the two mixingmethods. The heat associated with the high temperature meltingpeak of the blend samples obtained by both preparation methodsafter crystallization at 398 K was higher than that of thelinear polyethylene included in the blends, suggesting that apart of the branched polyethylene crystallized at 398 K. <b>Key words:</b>n-Hexane diffusion, polyethylene, free volume,solubility, sorption, desorption, mechanical properties,orientation, thermal properties, blend.

<p>The sorption/desorption behaviour of n-hexane in high molarmass linear polyethylene (PE) and branched PEs with 0.39 and5.09 hexyl branches per 100 main chain C atoms andcrystallinities between 4 and 82% at 298 K has been studied.Crystal core contents determined by Raman spectroscopy werealways lower than those determined by density measurements. Then-hexane solubilities in the copolymers depended in anon-linear manner on the content of penetrable polymercomponent and were lower for homogeneous copolymers than forheterogeneous copolymers at the same contents of penetrablecomponent. The solubility of hexane in the linear PE sampleswas proportional to the volume fraction of the penetrablepolymer and the solubility was low in comparison with that ofthe branched PE of the same crystallinity. TheCohen-Turnbull-Fujita (CTF) free volume theory was capable ofdescribing the desorption process in the PEs studied. Theconcentration dependence of the thermodynamic diffusivitypredicted by the CTF free volume theory was confirmed by thedata obtained by the differential method, and the differencesbetween the results obtained by the integral and differentialmethods were within the margins of experimental error. Thedependence of the fractional free volume of the penetrablephases on the phase composition suggests that mass transporttakes place from the liquid-like component to the interfacialcomponent and that the penetrant molecules are trapped at theinterfacial sites. The linear PE samples showed a physicallyrealistic trend with a decrease in the geometrical impedancefactor (t) with decreasing degree of crystallinity, whereas theopposite trend was obtained for the copolymers. The decrease int with increasing crystallinity in the copolymers may beexplained by the presence of wide crystal lamellae in the lowcrystallinity samples.</p><p>A novel melt-extrusion method was used to createcircumferential chain orientation in pipes of crosslinked PE.The microstructure of the pipes was characterized usingdifferential scanning calorimetry (DSC), density measurements,X-ray diffraction, infrared dichroism and contractionmeasurements. The mechanical properties were assessed byuniaxial tensile tests. The maximum degree of circumferentialorientation was obtained at the inner wall of the orientedpipe. The oriented pipe material exhibited a 5-15% higherdegree of crystallinity and a greater crystal thickness thanconventionally crosslinked pipe. The circumferential and axialmoduli of the oriented, crosslinked pipe were greater than thecorresponding moduli of the non-oriented crosslinked pipe.</p><p>Blends of single-site materials of linear PE andethyl-branched PE were prepared using solution- and melt-mixingmethods. The thermal properties of the blends were studied byDSC and results obtained by the two mixing methods werecompared. Data obtained for heats of melting andcrystallization, melting and crystallization peak temperaturesand melting and crystallization temperature profiles wereessentially the same for the samples obtained by the two mixingmethods. The heat associated with the high temperature meltingpeak of the blend samples obtained by both preparation methodsafter crystallization at 398 K was higher than that of thelinear polyethylene included in the blends, suggesting that apart of the branched polyethylene crystallized at 398 K.</p><p><b>Key words:</b><i>n</i>-Hexane diffusion, polyethylene, free volume,solubility, sorption, desorption, mechanical properties,orientation, thermal properties, blend.</p>

Thickness shear mode (TSM) sensors, also known as quartz crystal micro-balances (QCM) are a class of acoustic wave sensors that have been used for gas phase sensing. In this thesis this device is used to measure vapor-liquid equilibrium data for copolymers of poly(styrene-butadiene) at 294K. Copolymers of poly(styrene-butadiene) with varying percentages of styrene (85%, 45% and 21 %) were studied with benzene, n-hexane, dichloroethane and chloroform as solvents. Literature data for pure polystyrene/benzene and polystyrene/chloroform and polybutadiene/benzene were obtained to complement the measured data. Obtained experimental data were fit with a modified Flory-Huggins model and compared with the predictions of three models (UNIFAC-FV, Entropic-FV, and GK-FV). Flory-Huggins model gave a good quantitative fit for the solvent activities in the copolymer solutions.

O verapamil (VER) é um composto quiral comercializado como mistura racêmica dos enantiômeros (+)-(R)-VER e (-)-(S)-VER. O VER é biotransformado em norverapamil (NOR) e em outros metabólitos por vias dependentes do CYP. O tolueno e o n-hexano são solventes orgânicos que podem alterar o metabolismo de medicamentos dependente do CYP. Assim, o estudo investiga a estereosseletividade na farmacocinética do verapamil administrado a ratos na dose de 10 mg kg-1, sob forma racêmica, e do seu metabólito, norverapamil, bem como a influência do n-hexano e do tolueno na disposição cinética dos enantiômeros (+)-(R) e (-)-(S)-VER e (R)- e (S)-norverapamil em animais tratados com os solventes por inalação em câmara de exposição do tipo nose only nas concentrações de 88, 176 e 352 mg/m3 para o n-hexano e 94, 188 e 376 mg/m3 para o tolueno. Os enantiômeros do VER e do NOR foram separados na coluna de fase quiral Chiralpak® AD e analisados por LC-MS/MS (m/z = 441,3->165,5 para os enantiômeros do norverapamil e m/z 455,3->165,5 para os enantiômeros do verapamil). A análise farmacocinética foi realizada com base no modelo monocompartimental. A farmacocinética do verapamil é estereosseletiva em ratos do grupo controle não tratado com os solventes com acúmulo plasmático do eutômero (-)-(S)-VER (AUC0-? = 250,8 vs 120,4 ng mL-1 h; P<=0,05, teste de Wilcoxon). O metabólito (S)-NOR também foi acumulado no plasma dos animais do grupo controle com razão S/R relativa ao parâmetro AUC0-? de 1,5. Os parâmetros farmacocinéticos AUC0-?, Cl/F, Vd/F e t1/2 relativos aos enantiômeros (-)-S e (+)-(R)-VER e aos enantiômeros (S) e (R)-NOR não foram alterados pela exposição em câmara de exposição do tipo nose only ao n-hexano nas concentrações de 88, 176 e 352 mg/m3 e ao tolueno nas concentrações de 94, 188 e 376 mg/m3; teste de Kruskall-Wallis; P<=0,05. No entanto, a exposição ao n-hexano nas concentrações de 176 mg/m3 e 352 mg/m3 e ao tolueno nas concentrações de 94 mg/m3, 188 mg/m3 e 376 mg/m3 resultou em perda da enantiosseletividade observada para o grupo controle. / Verapamil (VER) is a chiral compound which is commercialized as a racemic mixture of the (+)-(R)-VER and (-)-(S)-VER enantiomers. VER is biotransformed into norverapamil (NOR) and other metabolites through CYP-dependent pathways. Toluene and n-hexane are organic solvents that can alter the metabolism of CYP-dependent drugs. The present study investigated the stereoselectivity in the pharmacokinetics of racemic VER administered to rats at a dose of 10 mg kg-1 and of its metabolite NOR. In addition, the influence of n-hexane and toluene on the kinetic disposition of the (+)-(R) and (-)-(S)-VER and (R)- and (S)-NOR enantiomers was analyzed in animals exposed by nose-only inhalation to n-hexane at concentrations of 88, 176 and 352 mg/m3 and to toluene at concentrations of 94, 188 and 376 mg/m3. The VER and NOR enantiomers were separated on a Chiralpak® AD chiral phase column and analyzed by LC-MS/MS (m/z = 441.3->165.5 for the NOR enantiomers and m/z 455.3->165.5 for the VER enantiomers). Pharmacokinetic analysis was performed using a monocompartmental model. The pharmacokinetics of VER was stereoselective in control rats not treated with the solvents, with plasma accumulation of the (-)-(S)-VER eutomer (AUC0-? = 250.8 vs 120.4 ng mL-1 h; P<=0.05, Wilcoxon test). The (S)-NOR metabolite was also found to accumulate in plasma of control animals, with an S/R AUC0-? ratio of 1.5. The pharmacokinetic parameters AUC0-?, Cl/F, Vd/F and t1/2 obtained for the (-)-S-VER, (+)-(R)-VER, (S)-NOR and (R)-NOR enantiomers were not altered by nose-only exposure to n-hexane at concentrations of 88, 176 and 352 mg/m3 or to toluene at concentrations of 94, 188 and 376 mg/m3 (P<=0.05), Kruskal-Wallis test). However, exposure to 176 and 352 mg/m3 n-hexane and to 94, 188 and 376 mg/m3 toluene resulted in the loss of enantioselectivity observed for the control group.

Made available in DSpace on 2016-06-02T19:56:44Z (GMT). No. of bitstreams: 1 3706.pdf: 2821060 bytes, checksum: 5975ad59eeeedfbd6e16578292306171 (MD5) Previous issue date: 2011-08-01 / Universidade Federal de Sao Carlos / The objective of this study was to verify the influence of the Si/Al ratio (11.5, 15.0, 25.0, 40.0 and 140.0) in zeolite ZSM-5 in the conversion, activity, selectivity and stability as bifunctional catalysts (Pt/H-ZSM-5) applied to the isomerization reaction of n-hexane. To prepare the bifunctional catalysts, initially the zeolites were submitted, successively, to ion exchange with ammonium cations, ion exchange cations with platinum, calcination and activation process. From the results of the isomerization of n-hexane, it was observed that with the increase of the Si/Al ratio, that is, decreasing the amount of aluminum, there was a reduction in activity and conversion. This is due to decrease the number of acid sites present, responsible to isomerize the carbocation generated in these sites. In contrast, the increase of the Si/Al ratio leads to a better selectivity to the formation of isomers. Among the catalysts, the Pt/H-ZSM-5 (15.0) showed the best result of conversion and activity. In order to compare the Pt/H-ZSM-5 catalysts, the reaction was carried out using the isomerization catalyst Pt/H-Beta (9.0). This catalyst had the best result that all the others, this result may possibly be due to increased acidity of the material and its morphological characteristics, such as type and diameter of pores etc. and/or the crystallite size of zeolites used. / O objetivo deste estudo foi verificar a influência da razão Si/Al (11,5, 15,0, 25,0, 40,0 e 140,0) na zeólita ZSM-5 através da conversão, atividade, seletividade e estabilidade de catalisadores bifuncionais (Pt/H-ZSM-5) aplicados a reação de isomerização do n-hexano. Para preparar os catalisadores bifuncionais, inicialmente as zeólitas foram submetidas, sucessivamente, a troca iônica das zeólitas com cátions amônio, troca iônica com cátions platina, processos de calcinação e ativação. A partir dos resultados da isomerização do nhexano observou que com o aumento da razão Si/Al, isto é, diminuição da quantidade de alumínio, obteve-se uma redução na atividade e conversão. Tal fato se deve a diminuição do número de sítios ácidos presentes, sendo que os mesmos são responsáveis por isomerizar os carbocátions gerados nos sítios. Em contrapartida, o aumento da razão Si/Al acarreta em uma melhor seletividade a formação dos isômeros. Dentre os catalisadores Pt/H-ZSM-5, o catalisador Pt/H-ZSM-5 (15,0) foi o que apresentou melhor resultado de atividade e conversão. A fim de comparar os catalisadores Pt/H-ZSM-5, a reação de isomerização do nhexano foi realizada utilizando o catalisador Pt/H-Beta (9,0). O mesmo obteve melhor resultado que todos os outros, podendo tal resultado ser, possivelmente, devido a maior acidez do material e suas características morfológicas, como tipo e diâmetro de poros etc. e/ou pelo tamanho do cristalito das zeólitas utilizadas.

O verapamil (VER) é um composto quiral comercializado como mistura racêmica dos enantiômeros (+)-(R)-VER e (-)-(S)-VER. O VER é biotransformado em norverapamil (NOR) e em outros metabólitos por vias dependentes do CYP. O tolueno e o n-hexano são solventes orgânicos que podem alterar o metabolismo de medicamentos dependente do CYP. Assim, o estudo investiga a estereosseletividade na farmacocinética do verapamil administrado a ratos na dose de 10 mg kg-1, sob forma racêmica, e do seu metabólito, norverapamil, bem como a influência do n-hexano e do tolueno na disposição cinética dos enantiômeros (+)-(R) e (-)-(S)-VER e (R)- e (S)-norverapamil em animais tratados com os solventes por inalação em câmara de exposição do tipo nose only nas concentrações de 88, 176 e 352 mg/m3 para o n-hexano e 94, 188 e 376 mg/m3 para o tolueno. Os enantiômeros do VER e do NOR foram separados na coluna de fase quiral Chiralpak® AD e analisados por LC-MS/MS (m/z = 441,3->165,5 para os enantiômeros do norverapamil e m/z 455,3->165,5 para os enantiômeros do verapamil). A análise farmacocinética foi realizada com base no modelo monocompartimental. A farmacocinética do verapamil é estereosseletiva em ratos do grupo controle não tratado com os solventes com acúmulo plasmático do eutômero (-)-(S)-VER (AUC0-? = 250,8 vs 120,4 ng mL-1 h; P<=0,05, teste de Wilcoxon). O metabólito (S)-NOR também foi acumulado no plasma dos animais do grupo controle com razão S/R relativa ao parâmetro AUC0-? de 1,5. Os parâmetros farmacocinéticos AUC0-?, Cl/F, Vd/F e t1/2 relativos aos enantiômeros (-)-S e (+)-(R)-VER e aos enantiômeros (S) e (R)-NOR não foram alterados pela exposição em câmara de exposição do tipo nose only ao n-hexano nas concentrações de 88, 176 e 352 mg/m3 e ao tolueno nas concentrações de 94, 188 e 376 mg/m3; teste de Kruskall-Wallis; P<=0,05. No entanto, a exposição ao n-hexano nas concentrações de 176 mg/m3 e 352 mg/m3 e ao tolueno nas concentrações de 94 mg/m3, 188 mg/m3 e 376 mg/m3 resultou em perda da enantiosseletividade observada para o grupo controle. / Verapamil (VER) is a chiral compound which is commercialized as a racemic mixture of the (+)-(R)-VER and (-)-(S)-VER enantiomers. VER is biotransformed into norverapamil (NOR) and other metabolites through CYP-dependent pathways. Toluene and n-hexane are organic solvents that can alter the metabolism of CYP-dependent drugs. The present study investigated the stereoselectivity in the pharmacokinetics of racemic VER administered to rats at a dose of 10 mg kg-1 and of its metabolite NOR. In addition, the influence of n-hexane and toluene on the kinetic disposition of the (+)-(R) and (-)-(S)-VER and (R)- and (S)-NOR enantiomers was analyzed in animals exposed by nose-only inhalation to n-hexane at concentrations of 88, 176 and 352 mg/m3 and to toluene at concentrations of 94, 188 and 376 mg/m3. The VER and NOR enantiomers were separated on a Chiralpak® AD chiral phase column and analyzed by LC-MS/MS (m/z = 441.3->165.5 for the NOR enantiomers and m/z 455.3->165.5 for the VER enantiomers). Pharmacokinetic analysis was performed using a monocompartmental model. The pharmacokinetics of VER was stereoselective in control rats not treated with the solvents, with plasma accumulation of the (-)-(S)-VER eutomer (AUC0-? = 250.8 vs 120.4 ng mL-1 h; P<=0.05, Wilcoxon test). The (S)-NOR metabolite was also found to accumulate in plasma of control animals, with an S/R AUC0-? ratio of 1.5. The pharmacokinetic parameters AUC0-?, Cl/F, Vd/F and t1/2 obtained for the (-)-S-VER, (+)-(R)-VER, (S)-NOR and (R)-NOR enantiomers were not altered by nose-only exposure to n-hexane at concentrations of 88, 176 and 352 mg/m3 or to toluene at concentrations of 94, 188 and 376 mg/m3 (P<=0.05), Kruskal-Wallis test). However, exposure to 176 and 352 mg/m3 n-hexane and to 94, 188 and 376 mg/m3 toluene resulted in the loss of enantioselectivity observed for the control group.

O n-hexano é um solvente usado industrialmente, e pode causar neuropatia periférica. O indicador biológico da exposição ocupacional ao n-hexano é a 2,5-hexanodiona (2,5HD). O objetivo deste estudo foi validar um método para determinação da 2,5HD urinária por cromatografia em fase gasosa, com detetor de ionização de chama. A validação do método levou em consideração dois tipos de tratamento da amostra, com hidrólise ácida e sem hidrólise ácida. Foi utilizada coluna HP1 (15m x 530&#181;m e espessura do filme 1,5&#181;m), gás de arraste He:4,2mL/min. e ciclohexanona como padrão interno. O método apresentou limites de detecção e quantificação, respectivamente 0,05 e 0,1 mg/L, linearidade de 0,1-20mg/mL, r = 0,999, recuperação entre 98-102%, com precisão e exatidão. Para verificar a aplicação do método foram analisadas 87 amostras de trabalhadores de indústrias de calçados (52 do grupo exposto e 35 do grupo controle). As amostras com hidrólise apresentaram níveis de 2,5HD cerca de dez vezes maiores quando comparados com as amostras sem hidrólise, esta diferença foi estatisticamente significante (p<0,0001), mas os níveis de 2,5HD não ultrapassaram o índice Biológico Máximo Permitido (IBMP) de 5mg/g de creatinina, em nenhuma das amostras analisadas. Os resultados indicam que o método validado mostrou aplicação prática para monitorização biológica, e as amostras que passaram pelo tratamento de hidrólise ácida apresentaram maiores níveis de detecção. / N-hexane is a solvent used in industries, and can cause peripheral neuropathy. The bioindicator in the biological monitoring of workers exposed to n-hexane is the 2,5-hexanedione (2,5HD). This study was developed in order to validate a method for 2,5HD analysis in urine by gas chromatography with flame ionization detector considering two types of sample preparing with and without acid hydrolysis. The chosen technique was performed with HP1 column measured 15m by 530&#181;m inner bore. Helio was used as the carrier gas at a flow rate of 4,2mL/min. The detection and quantification limits were respectively 0,05 and 0,1 mg/L. A linear relationship (r = 0,999) was observed in the range from 0,1-20mg/mL. The average recovery was 98-102%, with precision and accuracy. To apply this method, 87 samples from shoe factory workers were analyzed (52 exposed group and 35 control group). The samples with acid hydrolysis show levels ten times higher than samples without acid hydrolysis. This difference was statistically significant (p<0,0001), but this levels weren\'t higher than the Biological Exposure Index (BEI) were recommended value is 5mg/g creatinine, in any of the analyzed samples. These results reveal that the validated method has application for biological monitoring, and the samples with acid hydrolysis showed rates higher than the samples without hydrolysis.

Made available in DSpace on 2014-12-17T14:07:11Z (GMT). No. of bitstreams: 1 ThiagoC_TESE_PARCIAL.pdf: 936476 bytes, checksum: 8bf6e0f098d614d4feecc4fca3221123 (MD5) Previous issue date: 2013-03-22 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ? C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke / Diferentes tipos de catalisadores heterog?neos do tipo silicoaluminofosf?tico, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 e SAPO-41), peneiras moleculares com estrutura: AFI, AEL, ATO, CHA e AFO, respectivamente, foram sintetizados pelo m?todo hidrot?rmico. Utilizando-se de fontes como ? alumina hidratada (pseudobohemita), ?cido fosf?rico, s?lica gel, ?gua e diferentes tipos de direcionadores estruturais org?nicos, tais como o: brometo de cetiltrimetilam?nio (CTMABr), di-isopropilamina (DIPA), di-n-propilamina (DNPA) e hidr?xido de tetraetilam?nio (TEOS), nas respectivas amostras. Durante a prepara??o dos silicoaluminofosfatos o processo de cristaliza??o das amostras ocorreu ? temperatura de aproximadamente 200 ?C, durante per?odos que variaram de 18-72 h, quando foi poss?vel obter as fases puras dos SAPOs. Os materiais obtidos foram lavados com ?gua deionizada, secos e calcinados para a remo??o das mol?culas dos direcionadores. Posteriormente, as amostras foram caracterizadas por difra??o de raios-X (DRX), microscopia eletr?nica de varredura (MEV), espectroscopia de absor??o na regi?o do infravermelho (FT-IR), ?rea de superf?cie espec?fica e an?lise t?rmica via TG/DTG. As propriedades ?cidas foram determinadas usando adsor??o de n-butilamina seguida de termodessor??o programada. Esses m?todos revelaram que ?s amostras dos SAPOs apresentaram uma acidez tipicamente fraca a moderada. Entretanto, uma pequena quantidade de s?tios ?cidos fortes foi tamb?m detectada. A desativa??o dos catalisadores foi conduzida pelo coqueamento artificial das amostras, seguidas das rea??es de craqueamento do n-hexano em um microrreator catal?tico de leito fixo com fluxo cont?nuo acoplado em linha com um cromat?grafo a g?s. Como principais produtos foram obtidos: etano, propano, isobutano, n-butano, n-pentano e isopentano. Para determinar a regenera??o do catalisador e a remo??o do coque foi aplicado o m?todo cin?tico Vyazovkin (Model Free Kinetics) / 2020-02-01

Deux zéolithes nanocristaux de type *BEA et CP814E commerciales avec de différentes propriétés texturales, et une zéolithe microcristaux de type *BEA qui a été synthétisée durant cette thèse, ont été modifiées par une desilication en utilisant de différents traitements alcalins. Toutes les zéolithes parentes et certaines désilicées ont été sélectionnée pour le craquage du n-hexane, où aucune amélioration significative de la conversion n'a été observée après la désilication. Toutes les zéolithes parentes et quelques désilicées sélectionnées ont été transformés en leur forme bifonctionnelle par imprégnation du platine pour d'étudier l'impact de la désilication dans l'hydroisomérization de n-C10. On a constaté que l'amélioration des propriétés texturales par la désilication n'était pas toujours la cause d'une augmentation ou d'une diminution de l'activité et de la sélectivité du catalyseur, mais plutôt de la localisation des particules de Pt et leur distance prédite des sites acides. Cependant, la présence des mésopores inter- et intracristallins, en plus de la distance de Pt-H+, sont des importants caractéristiques qui affectent l'activité et la sélectivité. Nous avons également étudié l'impact de la longueur de chaîne dans l'hydroisomérization de n-C12 et de n-C14. Un phénomène spécial dans le cas de n-C12 est apparu, où le rendement d'isomérisation semblait inférieur à celui obtenu sur n-C10 et n-C14, ce qui suggère que cela résulte de l'effet de confinement. La série microcristaux a montré une amélioration de l'activité dans la transformation n-C14, mais une diminution de la sélectivité des isomères à cause des limites de diffusion potentielles. / Two commercial nanocrystal *BEA zeolites with different textural properties and a microcrystal synthesized *BEA zeolite, were desilicated using different alkaline treatment; classical in presence of Noah alone, or incorporated with a pore directing agent. All parent zeolites and some selected desilicated samples were chosen for catalytic cracking of n-hexane, where no significant improvement of n-hexane conversion was observed after desilication. To investigate the impact of desilication on the hyrdoisomerization of n-C10, all parent and the some selected desilicated zeolites were transformed into their bifunctional form by platinum loading. The improvement of the textural properties by desilication using the different pore directing agents, was not always the cause behind an increase or decrease in the activity and selectivity of the catalyst, but rather was more the location of the Pt particles and their predicted distance from the acidic sites. However, the synergetic effect of both the textural and bifunctional characteristics was positive. Tests on hydroisomerization of n-C12 and n-C14 to investigate the impact of chain length were done. In the nanocrystal series, a special phenomenon on n-C12 appeared where the isomerization yield seemed to be less than that obtained on n-C10 and n-C14, suggesting that this would be due the confinement effect, which was shown to be more effective in case of n-C12. The microcrystal series showed an improvement of the activity over all the catalysts in case of n-C14 transformation, but a decrease in isomers selectivity as observed due to probable diffusional limitations within the channels of these series catalysts.