Made available in DSpace on 2017-07-10T18:08:02Z (GMT). No. of bitstreams: 1 Vinicius Muller.pdf: 5054743 bytes, checksum: 4684dd9325f819006bfd84424d666674 (MD5) Previous issue date: 2014-07-04 / Electrospinning technique was applied in the covering of fused silica fibers by regenerated silk fibroin nanofibers (RSF). The parameters of electrospinning process were evaluated through factorial experimental design 22. This study showed the variables flow of solution and capillary-collector distance were statistically significant in the medium diameter response. The model obtained was validated through variance analysis (ANOVA) and response surface methodology. The material was used at solid phase micro extraction (SPME) in the extraction of samples containing a small chain alcohol, applied at gas chromatography (GC). The recovered device was characterized through Fourier transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and thermal analysis (DSC and TGA). The RSF nanofibers covered fibers were morphologic evaluated through scanning electronic spectroscopy (MEV). The results of MEV showed that was possible to obtain fibers in nanoscale, medium diameter around 304 ± 46 nm. The fibers were also submitted to simulated thermal treatment (100°C to 250°C). There was no fusion between the fibers until 250°C (4 hours of treatment), and a little structural damage. The thermal analysis of FRS and covered FRS nanofibers device showed that the electrospun material maintained the thermal stability, with loss due thermal degradation from 250°C. The GC assay demonstrated the standard SPME covered device didn´t interfere on the suggested method to the alcohol isopropyl analysis (AIS). The times of extraction and desorption were optimized in 20 minutes and 10 minutes, respectively. The methodology was evaluated about linearity and specificity. In the concentration between 10 to 500 ppm of AIS, the method was linear, with R2= 0,9927 and selective, with high resolution between peaks of methanol, AIS and ethyl acetate. Electrospinning process of RSF as covering device showed great potential to use in SPME due its high surface area, thermal stability and easiness process, as well as potential to application in extraction of alcohols and GC analysis. / A técnica de eletrofiação foi aplicada no revestimento de fibras de sílica fundida por nanofibras de fibroína de seda regenerada (FSR). Os parâmetros do processo de eletrofiação foram avaliados por meio de delineamento experimental fatorial 2². Este estudo mostrou que as variáveis vazão da solução e distância entre capilar-coletor foram estatisticamente significativas na resposta diâmetro médio. O modelo obtido foi validado através da análise de variância (ANOVA) e metodologia de superfície de resposta. O material foi empregado em Microextração em Fase Sólida (Solid Phase Microextraction SPME ) na extração de amostras contendo um álcool de cadeia pequena, aplicado em cromatografia gasosa (CG). O dispositivo recoberto foi caracterizado por meio de espectroscopia na região do infravermelho (FTIR-ATR) e análises térmicas (DSC e TGA). As fibras recobertas com nanofibras de FSR foram avaliadas morfologicamente através de microscopia eletrônica de varredura (MEV). Por meio dos resultados das análises de MEV, observou-se que foi possível obter fibras em escala nanométrica, com diâmetro médio em torno de 304 ± 46 nm. As fibras também foram submetidas a tratamento térmico em forno (100°C a 250°C). Não houve fusão das fibras até 250°C (até 4 h de tratamento), e poucos danos estruturais. As análises térmicas da FSR e do dispositivo recoberto com as nanofibras de FSR mostraram que o material eletrofiado manteve a estabilidade térmica, com perda por degradação térmica a partir de 250 °C. Os ensaios em CG demonstraram que o branco com o dispositivo de SPME recoberto não interferiu no método proposto para a análise de álcool isopropílico (AIS). Os tempos de extração e dessorção do analito foram otimizados em 20 min e 10 min, respectivamente. A metodologia foi avaliada quanto à linearidade e especificidade. Na faixa de concentração de 10 a 500 ppm de AIS, o método foi linear, com R=0,9927 e seletivo, apresentando alta resolução entre os picos de metanol, AIS e acetato de etila. O processo de eletrofiação da FSR como recobrimento do dispositivo mostrou grande potencial para emprego em SPME devido a sua grande área superficial, estabilidade térmica e facilidade no processo, bem como potencial para aplicação em extração de alcoóis e análise em CG.

Ce travail de thèse est principalement dédié à la mise en forme et à l’utilisation de nano-objets unidimensionnels comme matériaux d’électrodes transparentes. Les nanofils d’argent font partie des candidats les plus prometteurs pour le remplacement de l’oxyde d’indium-étain, actuellement le plus répandu dans les dispositifs commerciaux. La forte instabilité des nanofils d’argent à l’oxydation est néanmoins un problème critique puisque les électrodes deviennent moins performantes en peu de temps. En premier lieu, la triphénylphosphine a été utilisée comme agent inhibant l’oxydation. Contrairement aux électrodes non modifiées, celles-ci sont stables pendant plus de trois mois. Une deuxième partie est consacrée à l’utilisation de l’électrofilage pour élaborer des électrodes transparentes à base de nanofibres de matériaux conducteurs (nanofibres de cuivre, nanotubes de carbone, oxyde de graphène réduit). Enfin, une dernière partie concerne l’étude des propriétés mécaniques de nanofibres d’alcool polyvinylique par l’écoulement d’un fluide porteur dans une constriction réalisée en impression 3D. Cette méthode permet une analyse et une évaluation simple et rapide de la contrainte à la rupture des nanofibres, propriété difficilement accessible par des mesures mécaniques traditionnelles. / This PhD work deals mainly with the high scale organization and use of unidimensional nano-objects for making transparent electrodes. Among the candidates of choice for the replacement of indium tinoxide, the main material used in commercial devices, silver nanowires (Ag NW) are among the most promising. However, the tendency of silver nanowires to be quickly oxidized can severely affect their performances. Firstly, this drawback is circumvented through the use of triphenylphosphine (PPh3)as a protective agent. Unlike bare Ag NW electrodes, the PPh3 modified Ag NW electrodes are stable over three months. A second part is dedicated to the production of transparent electrodes via the electrospinning technique. Materials such as copper nanofibers, carbon nanotubes and reduced graphene oxide are investigated. The last part of the manuscript deals with the measurement of the mechanical properties of poly(vinyl alcohol) (PVA) nanofibers. To do so, the flowing of a fluid in a3D-printed constriction is used. Usually determined with difficulty, the fracture strength of the nanofibers can be evaluated quickly at ease.

Une lésion au niveau d’un nerf périphérique peut provoquer la perte de fonction sensorielle et motrice, et dans le cas de neurotmésis, la régénération spontanée ne se produira pas. De plus, si l’espace entre les deux segments de nerf est trop important, une suture directe n’est pas possible et l’implantation d’une greffe est nécessaire afin de créer une liaison entre les deux segments de nerf. L’autogreffe de nerf est le « gold standard » pour des procédés de réparation nerveuse : une portion d’un nerf sein (qui est considéré comme un nerf moins important) est prise du même patient et implantée au site de la lésion. Cependant, il existe plusieurs désavantages avec ce procédé comme une deuxième chirurgie, la perte de fonction au site du don, la possibilité de développer un neurome sur ce même site, ainsi qu’un taux de réussite de 50% dans les cas où l’espace entre les deux segments de nerf est très important. Il reste donc, un besoin de trouver un procédé alternatif afin d’augmenter le taux de réussite et d’éliminer les désavantages de l’autogreffe. L’objectif de cette étude est d’avancer vers une solution alternative de l’autogreffon en utilisant des biomatériaux. Cette thèse se divise en trois parties. La première se focalise sur le développement d’un modèle de guide nerveux basé sur des nanofibres de fibroïne de soie. Ce matériau est composé d’une organisation complexe qui inclut deux surfaces de nanofibres alignées avec une couche de nanofibres aléatoires à l’intérieur afin d’améliorer des propriétés mécaniques du matériau sans la perte d’orientation des fibres pour la régénération nerveuse. Le matériau est ensuite manipulé pour fabriquer un tube, multi-canaux avec une « enveloppe » supplémentaire afin de faciliter le procédé d’implantation chirurgicale. Ce guide nerveux a été soumis pour l’obtention d’un brevet européen le 12 juillet 2017 et cela est le sujet d’un deuxième article qui a été soumis pour publication. La deuxième partie de cette étude explore des possibilités d’une fonctionnalisation du matériau afin d’améliorer son efficacité pour la régénération nerveuse. Cette étude explore la fonctionnalisation de la fibroïne de soie avec une deuxième protéine, plusieurs facteurs de croissance, et des nanoparticules. Chacune de ces fonctionnalisations donne une possibilité d’ajouter des propriétés favorables à la fibroïne de soie, un matériau naturel et biocompatible. La troisième partie de cette étude examine l’efficacité d’un guide nerveux composé de la fibroïne de soie fonctionnalisée avec des facteurs de croissance pour la régénération nerveuse périphérique en comparaison avec un guide nerveux composé de la fibroïne de soie sans aucune fonctionnalisation et une suture direct (qui simule une autogreffe). Trois techniques d’évaluation différentes de la régénération nerveuse ont été réalisées afin d’obtenir une analyse plus complète. Il y a de nombreux mécanismes impliqués dans la régénération nerveuse, il est donc nécessaire d’étudier différents paramètres pour analyser l’efficacité de régénération. Les résultats d’analyses histologiques, d’électromyographie, et de capture de mouvement, ont été considérées ensemble afin d’arriver à une conclusion sur la réussite d’une régénération nerveuse pendant cette étude. Pour conclure cette étude, les guides nerveux fonctionnalisés avec une combinaison de facteurs de croissance démontrent une meilleure régénération nerveuse et une récupération de fonction supérieure. / Injury to a peripheral nerve can cause loss of sensory and motor function, and if the injury is very severe where the nerve undergoes neurotmesis, unassisted nerve regeneration may not occur. In this case, where the gap between nerve segments is too large to carry out a direct end to end suture, a graft is sutured to bridge the gap between sectioned nerve segments. The autologous nerve graft, where a portion of a less important nerve from the same patient is removed and grafted between nerve segments, continues to be the gold standard procedure for nerve repair. However, there are several drawbacks of this technique including a second surgical procedure, loss of function at the donor site, possibility of developing a painful neuroma at the donor site, and the 50% success rate of autografts used in large gaps. There is therefore a need for a tissue engineered nerve graft that can replace the autograft, and this study aims to advance toward an effective autograft alternative. This PhD is presented as a three part study consisting first of the development of a novel nerve guidance conduit based on a tri-layered silk fibroin nanofiber material comprised of a complex organization including two aligned fiber surfaces and a randomly deposited fiber interior to improve the mechanical properties of the material while not compromising the guidance capabilities of aligned nanofibers for nerve regeneration. The material is then used to fabricate a multi-channeled tube with an additional “jacket layer” in order to facilitate surgical implantation. This NGC has been submitted to be patented on July 12, 2017 and is the subject of the second article submitted for review for publication. The second part of this study explores the different possibilities of the functionalization of the material in order to improve the effectiveness for nerve regeneration. This study explores functionalizing the silk fibroin with a second protein, several growth factors, and nanoparticles that all have potential to add favorable properties to the natural biocompatible silk fibroin material. The final part of this study tests the effectiveness of growth factor-embedded silk fibroin NGCs for peripheral nerve regeneration in comparison with non-functionalized silk fibroin devices and a direct suture to simulate results obtained with an autograft. Three different techniques for the evaluation of nerve regeneration were used in order to produce a more comprehensive analysis. As there are many mechanisms involved in nerve regeneration, only one or two analysis techniques cannot paint a complete picture of the success of nerve regeneration. Therefore, histological analyses, electromyography analyses, and motion capture analyses were carried out and considered together in order to make a conclusion on the level of nerve regeneration success during this study. The conclusions from this study were that a NGC functionalized with a combination of growth factors appeared to exhibit the most successful nerve regeneration and functional recovery.

Les travaux présentés dans ce manuscrit décrivent le développement de trois supports innovants basés sur des nanofibres de matériaux hybrides obtenus par électrofilage pour la réalisation de biocapteur électrochimiques. La performance des biocapteurs est fortement améliorée du fait de l'utilisation de matériaux nanostructurés qui leurs confèrent des propriétés uniques. Les fibres obtenues par électrofilage trouvent des applications dans de nombreux domaines, mais leur utilisation pour l'élaboration de biocapteurs, bien que très prometteuse, est encore très peu abordée. Dans ce travail, différentes nanofibres polymériques contenant des nanotubes de carbone ou recouvertes de nanoparticules d'or ou d'un film de copolymère polypyrolle / poly(pyrolle-3-carboxylique acide) ont été utilisées comme support pour le développement de biocapteurs. La glucose oxydase a été utilisée comme enzyme modèle pour valider les performances des biocapteurs réalisés. Cette enzyme a été incorporée directement dans les nanofibres ou fixée de façon covalente à leur surface. Les biocapteurs ainsi obtenus, caractérisés par différentes techniques microscopiques et électrochimiques, ont permis la détection du glucose avec succès, en utilisant la voltammétrie cyclique et la spectroscopie d'impédance électrochimique, tout en montrant des performances (sensibilité, reproductibilité, stabilité) supérieures à celles des biocapteurs conventionnels / The work detailed within this manuscript describes the development of three novel efficient electroactive platforms based on electrospun nanofibrous hybrid materials for further application to electrochemical biosensors elaboration. The performance of biosensors is enhanced by their coupling with nanoscale materials, due to the unique properties that the latter exhibit. Although electroctrospun fibers find applications in various fields, their exploitation for biosensing is still in an early but promising stage. Herein, different polymeric nanofibers incorporating carbon nanotubes, decorated with gold nanoparticles or coated with conducting polypyrrole/poly(pyrrole-3-carboxylic acid) films were used as platforms for the development of biosensors. Glucose oxidase was used as a model enzyme to validate the performance of the developed biosensors. The enzyme was either incorporated into the nanofibers or covalently immobilized onto their surface. These innovative biosensors, characterized by different microscopic and electrochemical techniques, enabled successful detection of glucose by employing cyclic voltammetry and electrochemical impedance spectroscopy, whilst demonstrating enhanced performances over conventional biosensors in terms of sensitivity, reproducibility and stability

La lésion de nerfs périphériques peut engendrer des déficits moteurs et/ou sensoriels permanents. En dépit des progrès techniques réalisés au cours de ces 25 dernières années, une récupération complète suite à ces lésions n’est pas encore possible aujourd'hui. L’autogreffe nerveuse, toujours considérée comme le standard clinique, est la seule technique capable d’offrir les meilleurs résultats en termes de récupération fonctionnelle. Cependant, la survenue de complications post-opératoires lors d’autogreffes d’un nerf et la quantité limitée de nerfs disponibles conduisent à mettre au point d’autres stratégies alternatives. Dans ce contexte, la mise au point de biomatériaux pour substituts nerveux devient une nécessité clinique. Malgré les efforts de la recherche, ces prothèses ne permettent toujours pas une régénération du nerf à la hauteur de l’autogreffe. Le biomatériau utilisé doit notamment présenter des propriétés physiques et chimiques proches de celui du nerf natif. La soie, aux propriétés mécaniques uniques, représente une bonne alternative pour mettre au point ce type de prothèses. En effet, la protéine de soie déjà utilisée dans le domaine biomédical est biocompatible. Les modifications chimiques de cette protéine améliore et favorise l’adhérence et la croissance cellulaires par l’incorporation de facteurs de croissance ou d’autres molécules d'intérêt. Ce travail de thèse propose de développer un nouveau type de biomatériau à base de soie fonctionnalisée par deux facteurs de croissance : le Nerve Growth Factor (NGF) et le Ciliary NeuroTrophic Factor (CNTF). Étant donné l’architecture complexe qui compose la structure nerveuse, une matrice supportant la repousse des tissus de façon orientée semble primordiale. Nous démontrons, dans un premier temps, le pouvoir de ces nanofibres alignées (produites par electrospinning) à orienter la régénération tissulaire de différents organes par culture d’explants. Les nanofibres de soie alignées, biocompatibles sont bio-activées par ajout de NGF spécifique de la régénération nerveuse. Cette matrice créée présente un gradient de concentration en NGF qui permet d’orienter la repousse axonale en stimulant la croissance axonale dans une seule direction. Afin d’optimiser la croissance de deux populations cellulaires, nous avons incorporé du CNTF pour produire des nanofibres bifonctionnalisées. Ces nanofibres bifonctionnalisées ont conduit à une longueur des neurites 3 fois plus grande à leurs contacts, stimulant la croissance des cellules gliales. Ainsi, nous avons produit des conduits nerveux à base de soie biofonctionnalisée pour implantation chez le rat. Les analyses physico-chimiques et les propriétés mécaniques démontrent le caractère biomimétique de nos tubes de guidage. Les premières études de la locomotion et l’observation de coupes du nerf sciatique de rat, suite à l’implantation de nos conduits donnent des résultats très prometteurs. L’ensemble de ces travaux démontre l’efficacité de nos guides nerveux à base de soie et les présente comme une alternative prometteuse à l’autogreffe nerveuse pratiquée en clinique. / Peripheral nerve injury causes sensory and/or motor functions deficits. Despite technological advances over the past 25 years, a complete recovery from these injuries remains unsatisfactory today. The autograft still considered the "gold standard" in clinical practice. This is the only technique able to offer complete functional recovery. However, the occurrence of postoperative complications in autologous nerve and the limited amount of available nerves lead to develop alternatives strategy.In this context, development of nerve graft substitutes becomes by far a clinical necessity. Despite research efforts, these artificial prostheses design based on biomaterial doesn’t allow nerve regeneration as found in autograft nerve procedures. The biomaterial used must have the physical and chemical properties similar to that of the native nerve. Silk, well known for its unique mechanical properties, proposes a good alternative to develop these prostheses. Indeed, the silk protein is commonly used in the biomedical field and regenerative medicine. This protein biocompatibility may be improved through chemical modifications to promote adhesion and cell growth by the incorporation of growth factors or other molecules of interest. Therefore, this thesis proposes to develop a new type of functionalized silk biomaterial based on two growth factors : Nerve Growth Factor (NGF) and Ciliary NeuroTrophic Factor (CNTF). Given the complex architecture that consists of nerve structure, a matrix which is able to support and manage the outgrowth of tissue becomes essential. We demonstrate the power of these aligned nanofibers (produced by electrospinning) to guide and manage tissue regeneration from different organ explants culture. Aligned silk nanofibers, were biocompatible and bio-activated by adding NGF involved for nerve regeneration. This matrix has been created with a concentration gradient of NGF to guide neuritis outgrowth in only one direction. The presence of this gradient demonstrated a better axonal growth in one direction versus the uniform concentration conditions. Nerve cells consist essentially of two cell populations which are neurons and Schwann cells. To optimize the culture and growth of these two populations, in addition to NGF, we incorporated CNTF to produce bifunctionalized nanofibers. These biofunctionalised nanofibers led to a length 3 times larger on contact with neurites. The glial cells growth, alignment and migration were stimulated by CNTF. Thus, we produced bi-functionalized nerve guidance conduits for rat implantation. The physico-chemical analyzes demonstrate the biomimetic of our guide tubes. Early studies of locomotion and observing histological sections of rat sciatic nerve, following the implementation of our conduits gave very promising results.These studies demonstrate the relevance of our nervous guides’ silk-based developed as an effective alternative to nerve autograft performed in the clinic.

Polymer and composite polymer-ceramic nanofibers were prepared by electrospinning process. Solution of 20 wt.% polyvinylidene fluoride (PVDF) in a mixture of dimethyl sulfoxide (DMSO) and acetone in the ratio of 7:3 was chosen as the most suitable precursor. When preparing composite nanofibers, 20 wt.% of barium calcium zirconate titanate (BCZT) or barium titanate (BT) nanoparticles was added to this PVDF solution. Given parameters were defined as the most suitable for the process of electrospinning: voltage of 50 kV, feeding rate of 30 l/min, distance between emitter and collector of 20 cm and needle diameter of 17 G. The effect of polymer molecular weight and the rotation speed of collector was also studied. Various properties of prepared samples were studied: morphology and fiber diameter, phase composition with the use of x-ray diffraction and Fourier transform infrared spectroscopy and also chosen electrical properties. Lower fiber diameters appeared with lower polymer molecular weight and higher rotation speed of the collector. These parameters resulted in higher percentage of the piezoelectric phase as well. The smallest achieved fiber diameter was around 300 nm, the highest percentage of phase was 92 % and the highest piezoelectric constant had a value of 16 pC/N. Composite fibers filled with BT particles showed better properties that the ones filled with BCZT particles.

The diploma thesis deals with the treatment of polycaprolactone (PCL) nanofibers. PCL fibers were subjected to the deposition of plasma amine polymers in a low pressure pulsed radiofrequency capacitively coupled discharge using cyclopropylamine monomer (CPA). Collagen as an extracellular matrix (ECM) protein was immobilized and cell proliferation on the modified nanofiber surface was monitored. Untreated PCL fibers were also subjected to the deposition of an antibacterial copper layer, and the fibers were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopy (EDX).

This thesis introduces reader to current knowledge of nanomaterials and their usage. It summarises production methods and usage of different materials in nuclear power plants, nuclear research and nuclear medicine. Theoretical part of this thesis is dedicated to possible usage of carbon nanotubes for neutron beam collimation and guides. In experimental part different materials were tested in measuring box connected to horizontal radial channel of VR-1 nuclear reactor and their influence on neutron flux was measured. Tested samples were non-oriented carbon nanotubes, carbon nanofibers, alumina nanowires, oriented carbon nanotubes with several angles of rotation and these samples were compared with results of graphite.

M.Tech. (Department of Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / Several industries utilize species of synthetic dyes that are found in their wastewater, which is passed out in the environment. Methylene blue is one of the organic dyes that causes water pollution. It causes damage to the aquatic eco-system and health problems to human beings. It is non-biodegradable due to its chemical nature. Advanced oxidation processes (AOP’s) have been developed for the degradation of these dyes, however, some of these methods are limited due to their high cost and low efficiency. Among these methods, Fenton catalysis has been proven to be an effective method due to its low cost, high efficiency, and re-usability. Iron oxide nanoparticles have been mainly used in Fenton process however they are also limitated due to the forming of secondary pollutants, due to catalysts recovery difficulties, hence they require supporting materials. In this work, iron oxide-based catalyst supported on silica nanofibers were fabricated via electrospinning of silica sol incorporated with iron oxide, using three different routes, (a) Method 1 - wetness incipient impregnation, (b) Method 2 - direct addition of iron precursor to the silica sol and (c) Method 3 - incorporation of iron oxide nanoparticles into silica sol. The effect of iron oxide concentration loadings (1 wt%, 2 wt% and 5 wt %) was studied. Increase in iron content resulted in agglomeration of nanoparticles as embedded in the fibers as evident from their SEM images in method 3.1. The SEM results showed diameters from method 1, 2 and 3 ranging from the distribution ranges of 276 – 288 nm, 243 – 265 nm and 188 nm, respectively. EDS showed the presences of Si, P, Fe, O and P. XRD showed a crystalline phase of magnetite (9 nm) and goethite (32 nm) method 1 and 3, with vibrational modes at 3300 cm-1, 1100 cm-1, 950 cm-1 and 580 cm-1 ascribed to O-H, Si-O-Si, Si-O and Fe-O on the FTIR spectra, it showed both the presence of silica and iron oxide. The degradation of methylene blue was monitored by UV-Vis spectroscopy, the Fenton catalytic activity of the iron-oxide supported on silica nanofibers showed higher catalytic activity compared to the unsupported iron-oxide nanoparticles. The catalyst prepared by wetness incipient impregnation (method 1) had a degradation efficiency of 69.1%, the direct addition of iron precursor to the silica sol (method 2) had 75.2% and incorporation of iron oxide nanoparticles magnetite and goethite with the silica sol had 53.7% and 34.7%, respectively. The catalyst prepared by the direct addition of iron precursor in the sol (method 2) showed a high catalytic activity compared to the other catalyst prepared by other methods. Unsupported Iron oxide nanoparticles had a higher degree of leaching of 1.28 ppm magnetite, and 1.68 ppm goethite, compared to the supported iron oxide in method 1 and method 3. The catalyst incorporated with goethite showed a high degree of leaching, 3.95 ppm and 1.33 ppm. The catalyst with high catalytic activity showed a lower degree of leaching with 0.05 ppm.

No description available.