1 |
Robust and Biocompatible Bonding of Hybrid Microfluidic Devices Using Off-Stoichiometric Thiol-ene ThermosetsHarris, Peter January 2023 (has links)
Some of the major obstacles the microfluidics industry has yet to overcome in order to facilitate large scale manufacturing of devices are costly back-end processes. Among these, bonding presents some of the most obvious difficulties and is often associated with structural deformation and surface modification. Off-stoichiometric thiol-ene (OSTE) is a relatively new material and hasn’t yet achieved the same level of adoption as Polydimethylsiloxane (PDMS) which has been the go-to material in the field of microfluidics for over two decades. OSTE offers an alternative to PDMS and promises bonding without surface treatment as well as a hydrophilic surface, removing a step in the manufacturing process. In this work, the property of OSTE to bond with a variety of commonly used thermoplastic materials were tested as well as its suitability for use in pharmaceutical devices such as Lab-on-a-chip. In addition to untreated OSTE, a surface modifier was used to examine the potential for surface modification when using OSTE as a microfluidics material. From the testing performed, we demonstrated OSTE’s capacity to form robust bonds with a range of thermoplastic materials as well as comparable biocompatibility to PDMS. / Bland de största hindren som industrin ännu ej löst när det kommer till storskalig produktion av mikrofluidiska produkter är kostsamma ”back-end” processer. Av dessa presenterar bindingsprocesser några av de mest uppenbara svårigheterna och medför ofta deformationer av finstrukturer samt ändringar i ytkemi. Off-stoichiometric thiolene (OSTE) är ett relativt nytt material och har ännu inte blivit lika utbrett i sin använding som Polydimethylsiloxane (PDMS) vilket har varit standardmaterialet i mikrofluidik i över två årtionden. OSTE erbjuder ett alternativ till PDMS, med bindingsprocesser som ej kräver ytterligare ytmodifikationer och en hydrofil yta, vilket eliminerar ett steg i tillverkningsprocessen. I detta arbete undersöktes egenskapen av OSTE att binda till en rad ofta använda thermoplaster samt dess lämplighet i medicinskt bruk, i system som ”Lab-on-a-chip”. Förutom obehandlad OSTE, så användes en ytmodifierare för att undersöka möjligheten för ytmodifiering vid användingen av OSTE i mikrofluidik. Resultaten av våra tester visade OSTE’s förmåga att forma robusta bindingar till en rad thermoplaster så väl som en jämförbar biokompatibilitet till PDMS.
|
2 |
A lab-on-a-chip device for photonic sensing of single cellsMalmström, Johanna January 2017 (has links)
Cells are the smallest living units and together they form all living organisms on earth. The cells are not only the building blocks of all living things, they also possess the most important information about life. A deeper understanding of these units may reveal hidden secrets about difficultly cured diseases, memory and learning, among others. Today’s techniques have problems such as low sensitivity, lethal preparation steps for the cells and overlaps in result spectra. Microfluidics has shown to be a useful tool allowing improved dynamic control, high throughput and sensitivity in nanoliters. The aim with this project is to design a microfluidic system for future integration with photonic sensors. Three different designs were developed, one design with the aim to integrate with photonic sensors and two for cell trapping only. Simulations and analytical calculations were performed to verify the requirements of single cell trapping. Simulation and analytical calculation results consorted, except for the ladder design. Moreover, strength calculations were performed for the sensor, to verify that it could handle the high pressures. A fabrication process was developed and an OSTE polymer was chosen as a suitable material. The transparency of the OSTE for fluorescent signals was studied. Results from the fabrication show proper lithography and molding as well as flow through channels. However, bubbles tend to appear in the channels. A rough surface of the chip appeared to primarily come from defects and filth on mask and mold. Three different connector solutions were tested, but they could not stand the high pressures. The work in this project has taken the development one step closer to the final goal to integrate photonic biosensors with a microfluidic system enabling single cell sensing.
|
3 |
OSTE Microfluidic Technologies for Cell Encapsulation and Biomolecular AnalysisZhou, Xiamo January 2017 (has links)
In novel drug delivery system, the encapsulation of therapeutic cells in microparticles has great promises for the treatment of a range of health con- ditions. Therefore, the encapsulation material and technology are of great importance to the validity and efficiency of the advanced medical therapy. Several unsolved challenges in regards to versatile microparticle synthesis ma- terials and methods form the main obstacle for a translation of novel cell therapy concepts from research to clinical practice. Thiol-ene based polymer systems have emerged and gained great popular- ity in material development in general and in biomedical applications specif- ically. The thiol-ene platform is broad and therefore of interest for a variety of applications. At the same time, many aspects of this material platform are largely unexplored, for example material and manufacturing technology developments for microfluidic applications . In this Ph.D. thesis, thiol-ene materials are explored for use in cell encap- sulation. The marriage of these two technology fields breeds the possibility for a novel microfluidic cell encapsulation approach using a novel encapsulation material. To this end, several new manufacturing technologies for thiol-ene and thiol-ene-epoxy droplet microfluidic devices were developed. Moreover, core-shell microparticle synthesis for cell encapsulation based on a novel co- synthesis concept using a thiol-ene based material was developed and inves- tigated. Finally, a thiol-ene-epoxy system was also used for the formation of microwells and microchannels that improve protein analysis on microarrays. The first part of the thesis presents the background and state-of-the-art technologies in regards to cell therapy, microfluidics, and thiol-ene based ma- terials. In the second part of the thesis, a novel manufacturing approach of thiol-ene-epoxy material as well as core-shell particle co-synthesis in micro- fluidics using thiol-ene based material are presented and characterized. The third part of the thesis presents the cell viability studies of encapsulated cells using the novel encapsulation material and method. In the final part of the thesis, two applications of thiol-ene-epoxy gaskets for protein detection mi- croarrays are presented. / Inkapsling av levande celler i mikrokapslar för terapeutiska ändamål är mycket lovande för frmatida behandling av många olika sjukdomar. Emeller- tid är en behandlings effektivitet i hög grad beroende av vilka material som används för inkapsling och vilken teknisk lösning som används för att ska- pa mikrokapslarna. För närvarande återstår det många utmaningar för att omvandla grundforskningresultat till klinisk verklighet, vilken kräver mer än- damålsenliga tillvägagångssätt för att tillverka mikrokapslar i material som är kompatibla med användningsområdena. De senaste åren har tiol-en baserade polymerer har blivit mycket använda för materialutveckling i stort och för biomedicinska tillämpningar i synnerhet. Med tiol-en kemi kan en mycket stor mängd helt olika syntetiska material framställas, vilket gör tiol-ener intressanta för en mängd applikationer. För närvarande är dock mycket inom denna materialklass outforskat, t.ex. inom material och tillverkningmetodik för mikrofluidiktillämpningar. I denna avhandling används tiol-ener för cellinkapsling. Sammanslagning av dessa teknologier möjliggör en ny typ av cellinkapsling med nya materi- alegenskaper. En mängd olika tillverkningssätt där tiol-en eller tiol-en-epoxi används för droplet-mikrofluidiksystem utvecklades. Core-shell mikrokapsel- syntes för cell-inkapsling baserat på en ny metod för samtidig syntes av både core och shell utvecklades och karaktäriserades. Slutligen utvecklades ett tiol- en-epoxi system för enkel integrering med proteinmikroarrayer på objektsglas. I avhandlingens första del presenteras bakgrund och dagens bästa teknolo- gier för terapeutisk cellinkapsling, mikrofluidik och tiol-en baserade material. I avhandlingens andra del presenteras en ny tillverkningsmetod för mikro- strukturerade tiol-en-epoxi artiklar och samtidig syntes av core och shell för mikrokapslar med användande av mikrofluidik. I den tredje delen presenteras cellöverlevandsstudier för de celler som inkapslats med de nya materialen och de nyutvecklade metoderna. I den avslutande delen beskrivs två specifika fall där tiol-en-epoxi komponenter används för proteindetektion och mikroarrayer. / <p>QC 20171122</p>
|
4 |
Evaluation of OSTE-hybrid materials for acoustophoresis applications / Utvärdering av OSTE-hybrid-material för applikationer inom akustoforesForss, Elin January 2020 (has links)
This project aimed at exploring new hybrid materials to be used for acoustophoresis applications. Acoustophoresis can be used to manipulate particles inside a microfluidic channel by creating ultrasound standing waves within the channel [1]. This can be used for cell separation [2] or trapping of particles [3]. The intent of this project was to create materials for use in microfluidic channels that would be cheaper and easier to manufacture than those traditionally used, while still having adequate acoustic properties to allow for use in acoustopheresis. This was done by investigating whether the addition of glass-beads or glass-bubbles could increase the acoustic properties of an off-stoichiometry-thiol-enes (OSTE) based polymer. Hybrid samples with different volume fractions of glass-beads or glass-bubbles added to the OSTE polymer were manufactured and characterised according to their acoustic properties using the pulse-echo buffer-rod method. The acoustic properties measured were the density, attenuation, acoustic impedance and the reflection coefficient between water and the material. The addition of glass-beads was found to increase the acoustic impedance while the inverse was found for the addition of glass-bubbles. Both the addition of glass-beads and glass-bubbles were found to increase the attenuation. The hybrid material that was found to have the most suitable acoustic properties was OSTE/Glass-beads 40%, whose acoustic impedance had been increased ∼60% compared to pure OSTE. Consequently, the OSTE/Glass-beads 40% material was used to manufacture a microfluidic channel. A particle trapping experiment showed that the OSTE/Glass-beads 40% microfluidic channel was able to obtain bead trapping. This means that a standing wave was able to be generated within the channel and that it was strong enough to trap particles in the centre of the channel. However, evaluation of the particle trapping efficiency of the channel showed that it was not as effective as those using traditional materials. Therefore, future work is recommended to optimise a channel design for the OSTE/Glass-beads 40% material to increase the particle trapping efficiency. / I detta projekt undersöktes ett nytt hybridmaterial för användning i applikationer inom akustofores. Akustofores kan användas till att manipulera partiklar inuti mikrofluidkkanaler genom att generera ståendevågor i kanalen med hjälpav ultraljud [1]. Detta kan användas till cellseparation [2] eller till att fånga partiklar [3]. Målet i detta projekt var att skapa material som skulle bli billigare och möjliggöra enklare fabricering av kanalerna som används inom akustofores än de material som traditionellt används, med bibehållande av tillräckliga akustiskaegenskaper. Detta genomfördes genom att undersöka om tillsättning av glaspärlor eller glasbubblor kunde förbättra de akustiska egenskaperna av en off-stoichiometry-thiol-enes (OSTE) baserad polymer. Hybridprover gjorda på OSTE-polymeren med olika volymandelar av glaspärloroch glasbubblor tillverkades och kategoriserades med avseende på deras akustiska egenskaper med hjälp av pulseeko buffertstång metoden. De akustiska egenskaperna som uppmättes var densitet, attenuering, akustisk impedans och reflektions koefficienten mellan vatten och materialet. Resultatet av projektet visade att tillsättning av glaspärlor ökade den akustiska impedansen i motsatts till glasbubblorna som visade sig minska den. Vidare visade det sig att både tillsättningen av glaspärlor och glasbubblor ökade attenueringen. Det hybridmaterial som visade sig ha de mest lämpliga akustiska egenskaperna var OSTE/glaspärlor med en 40% volymandel av glaspärlor. Den akustiska impedansen hade förhöjts med cirka 60% jämfört med vanlig OSTE. Därför valdes det hybrid-materialet till att tillverka en mikrofluidikkanal. Därefter genomfördes ett partikelfångstexperiment som visade att, OSTE/glaspärlor med en 40% volymandel av glaspärlor, kunde erhålla partikelfångst i kanalen. Detta innebär att en stående våg kunde genereras i kanalen och att den var tillräckligt stark för att kunna fånga partiklarna i mitten av kanalen. Däremot visade utvärdering av kanalens partikelfångsteffektivitet att den inte var lika effektiv som kanaler gjorda av traditionellt använda material. Därför rekommenderas framtida arbete till att designa en optimerad kanaldesign med OSTE/Glas-pärlor 40% materialets egenskaper i åtanke för att förhoppningsvis kunna öka partikelfångst effektivitet.
|
5 |
Mikrofluidický enzymatický reaktor pro testování léčiv / Microfluidic Enzymatic Reactor for Drug ScreeningKönigsmarková, Kristýna January 2019 (has links)
This master thesis deals with the use of microfluidics for the purpose of microfluidic enzymatic reactor for drug screening. At first it considers the issue from a theoretical point of view – describes microfluidics as a newly developing and promising field of production of microfluidic devices, materials, biomedical applications and advantages and disadvantages of microfluidics overall. Furthermore, it focuses on an area of analytical utilization of enzymes within enzyme reactors. In the first part of the experimental section, conditions for the testing of enzymes of xenobiotics metabolism in the liver were optimized, namely the model of coumarin metabolism via the spectrofluorimetry method. The second part of the experimental work dealt with optimization of the fabrication conditions of microfluidic chips from OSTE (off-stoichiometry Thiol Ene) via the soft lithography method. Subsequently, the functionality of the produced chips was tested. Based on the results of both parts of the experimental work, an evaluation was carried out to assess the suitability of their interconnection for future research – screening of microsomal enzyme activity and model biotransformation of drugs within the channels of the fabricated devices.
|
6 |
From Macro to Nano : Electrokinetic Transport and Surface ControlPardon, Gaspard January 2014 (has links)
Today, the growing and aging population, and the rise of new global threats on human health puts an increasing demand on the healthcare system and calls for preventive actions. To make existing medical treatments more efficient and widely accessible and to prevent the emergence of new threats such as drug-resistant bacteria, improved diagnostic technologies are needed. Potential solutions to address these medical challenges could come from the development of novel lab-on-chip (LoC) for point-of-care (PoC) diagnostics. At the same time, the increasing demand for sustainable energy calls for the development of novel approaches for energy conversion and storage systems (ECS), to which micro- and nanotechnologies could also contribute. This thesis has for objective to contribute to these developments and presents the results of interdisciplinary research at the crossing of three disciplines of physics and engineering: electrokinetic transport in fluids, manufacturing of micro- and nanofluidic systems, and surface control and modification. By combining knowledge from each of these disciplines, novel solutions and functionalities were developed at the macro-, micro- and nanoscale, towards applications in PoC diagnostics and ECS systems. At the macroscale, electrokinetic transport was applied to the development of a novel PoC sampler for the efficient capture of exhaled breath aerosol onto a microfluidic platform. At the microscale, several methods for polymer micromanufacturing and surface modification were developed. Using direct photolithography in off-stoichiometry thiol-ene (OSTE) polymers, a novel manufacturing method for mold-free rapid prototyping of microfluidic devices was developed. An investigation of the photolithography of OSTE polymers revealed that a novel photopatterning mechanism arises from the off-stoichiometric polymer formulation. Using photografting on OSTE surfaces, a novel surface modification method was developed for the photopatterning of the surface energy. Finally, a novel method was developed for single-step microstructuring and micropatterning of surface energy, using a molecular self-alignment process resulting in spontaneous mimicking, in the replica, of the surface energy of the mold. At the nanoscale, several solutions for the study of electrokinetic transport toward selective biofiltration and energy conversion were developed. A novel, comprehensive model was developed for electrostatic gating of the electrokinetic transport in nanofluidics. A novel method for the manufacturing of electrostatically-gated nanofluidic membranes was developed, using atomic layer deposition (ALD) in deep anodic alumina oxide (AAO) nanopores. Finally, a preliminary investigation of the nanopatterning of OSTE polymers was performed for the manufacturing of polymer nanofluidic devices. / <p>QC 20140509</p> / Rappid / NanoGate / Norosensor
|
7 |
Thiol-ene and Thiol-ene-epoxy Based Polymers for Biomedical MicrodevicesVastesson, Alexander January 2017 (has links)
Within healthcare there is a market pull for biomedical devices that can rapidly perform laboratory processes, such as diagnostic testing, in a hand-held format. For this reason, biomedical devices must become smaller, more sophisticated, and easier to use for a reasonable cost. However, despite the accelerating academic research on biomedical microdevices, and especially plastic-based microfluidic chips, there is still a gap between the inventions in academia and their benefit to society. To bridge this gap there is a need for new materials which both exhibit similar properties as industrial thermoplastics, and that enable rapid prototyping in academia. In this thesis, thiol-ene and thiol-ene-epoxy thermosets are evaluated both in terms of their suitability for rapid prototyping of biomedical microdevices and their potential for industrial manufacturing of “lab-on-chips”. The first part of the thesis focuses on material development of thiol-ene and thiol-ene-epoxy thermosets. Chemical and mechanical properties are studied, as well as in vitro biocompatibility with cells. The second part of the thesis focuses on microfabrication methods for both thermosets. This includes reaction injection molding, photostructuring, and surface modification. It is demonstrated how thiol-ene and thiol-ene-epoxy both provide advantageous thermo-mechanical properties and versatile surface modifications via “thiol-click chemistry”. In the end of the thesis, two applications for both polymer platforms are demonstrated. Firstly, thiol-ene is used for constructing nanoliter well arrays for liquid storage and on-demand electrochemical release. Secondly, thiol-ene-epoxy is used to enhance the biocompatibility of neural probes by tuning their flexibility. It is concluded that both thiol-ene and thiol-ene-epoxy thermosets exhibit several properties that are highly suitable for rapid prototyping as well as for scalable manufacturing of biomedical microdevices. / <p>QC 20171003</p>
|
Page generated in 0.0158 seconds