Um polieletrólito catiônico (poliamina), com baixo peso molecular e elevada densidade de carga, normalmente aplicado como agente coagulante do lixo aniônico, foi usado para estudos de retenção e drenagem na fabricação de papel. O uso do carboximentil celulose de sódio para simulação do teor de lixo aniônico e seu efeito na retenção de cargas minerais foi uma característica importante para este trabalho. Pode ser observado que o aumento da dosagem do polímero catiônico tanto melhora a retenção de cargas minerais, avaliada pela turbidez do filtrado, quanto melhora a drenagem do sistema, avaliada pela velocidade de escoamento. Entretanto, elevadas dosagens deste polímero comprometeram os resultados destes parâmetros devido à inversão de carga do sistema. Pode também ser confirmado que forças de cisalhamento excessivas prejudicam a retenção de cargas minerais. Ademais, um polianfótero, com peso molecular e densidade de carga elevados, contendo grupos positivo (N-[3-(N,N-dimetilamino)propil]acrilamida), negativo (ácido metileno butanodióico) e nulo (acrilamida) na mesma cadeia, foi testado como agente de resistência a seco do papel. Todos os estudos em nível molecular sobre o comportamento do polianfótero em solução e o seu comportamento de adsorção sobre superfícies modelos carregadas, em diferentes condições de pH e de força iônica, foram importantes para explicar tanto dos fenômenos de adsorção, envolvendo fibras celulósicas e polianfótero, quanto o seu efeito na resistência mecânica do papel. Foi observado que a solubilidade do polímero aumenta à medida que o pH se distancia do seu ponto isoelétrico, pHPIE 7,3, e reduz para valores de pH próximos ao pHPIE. O tamanho das estruturas do polianfótero depende do pH do meio de dispersão. As características de tamanho do polianfótero tanto sob a forma de cadeias individuais ou quanto sob a forma de agregados, foram medidas através da técnica de espalhamento dinâmico de luz. As propriedades viscoelásticas das camadas adsorvidas e a quantidade de polímero adsorvida foram medidas através da técnica da balança microgravimétrica com dissipação de energia. Estas duas determinações, associadas às imagens no microscópio de força atômica, foram importantes para o entendimento dos resultados práticos do uso do polianfótero como agente de resistência a seco do papel. Maiores resultados de resistência do papel, avaliada através da resistência à tração, foram alcançados para valores de pH próximos ao ponto isoelétrico onde foram encontrados o seguinte: (1) maiores tamanhos para as estruturas do polímero em solução, (2) maior quantidade de massa nas camadas adsorvidas e (3) a formação de camadas mais viscoelásticas. O fenômeno de separação de fases, associado à mudança da solubilidade do polímero em solução devido ao balanço dos grupos positivos e negativos ionizados ao longo da faixa de pH estudada, foi considerado o principal aspecto para a variação em tamanho dos agregados. Embora este polímero tenha apresentado comportamento antipolieletrólito devido à expansão da sua cadeia e ao aumento da densidade de carga com o aumento da força iônica, considerando o efeito da força iônica para pH 4,3, o comportamento de adsorção do polianfótero foi avaliado como o comportamento de um polieletrólito monocarregado de alta densidade de carga. Maiores e menores quantidades de massas adsorvidas foram encontradas para valores intermediários e extremos de força iônica, respectivamente. As interações eletrostáticas foram consideradas as principais responsáveis pela adsorção do polímero sobre superfícies carregadas. Entretanto, a blindagem de cargas foi considerada a explicação para os baixos valores de massa adsorvida para valores mais elevados de força iônica. / A cationic polyelectrolyte (polyamine), with low molecular weight and high charge density, usually applied as anionic trash coagulant, was used for the retention and drainage studies in the papermaking. The use of sodium carboxymethyl cellulose to simulate the anionic trash content and its effect on the filler retention was an important feature of the work. It could be noted that the increasing of the cationic polymer dosage improves both the filler retention, evaluated by the turbidity of the filtrate, and the system drainage, evaluated by the flow speed. However, high dosages of this polymer compromised the results of these parameters due to the reversal of the system charge. It can also be confirmed that excessive shear forces affect the filler retention. Furthermore, a polyampholyte, with high molecular weight and charge density, containing positive (N-[3-(N,N- dimethylamino)propyl]acrylamide), negative (methylene butanedioic acid), and neutral (acrylamide) groups in the same chain, was tested as a dry strength agent. All of the studies at molecular level concerning to the polyampholyte behavior in the solution and its adsorption behavior on charged model surfaces at different conditions of pH and ionic strength, were important to explain both the adsorption phenomena, involving cellulosic fibers and polyampholyte, and its impact on the paper strength. It was observed that the polymer solubility increases as the pH moves away from its isoelectric point, pHIEP 7.3, and decreases when the pH approaches close to pHIEP. The sizes of the structures of the polyampholytes depend on the pH of the dispersion medium. Also the size characteristics of polyampholyte, both in individual and aggregated forms, were measured by dynamic light scattering technique. The viscoelastic properties of adsorbed layers, as well as the amount of the adsorbed polymer, were measured by quartz crystal microbalance technique with energy dissipation. These two measurements, associated with the atomic force microscopy images, were important to understand the practical results of polyampholyte usage as a dry strength agent. Best results of paper strength, evaluated by paper strength index, were achieved at pH close to the isoelectric point on which one were found the following features: (1) larger sizes of the polymer structures in solution, (2) higher amount of mass in the adsorbed layers, and (3) the formation of more viscoelastic layers. The phase separation phenomenon, associated with the change in the solubility of the polymer due to the balance of the positive and negative groups throughout the studied pH range, was considered the main aspect for the variation in size of the aggregates. Although this polymer shows antipolyelectrolyte behavior due to the expansion of the its chain and the increasing in charge density with the ionic strength, considering the effect of ionic strength at pH 4.3, the adsorption behavior of polyampholyte was evaluated as a monocharged polyelectrolyte behavior with high charge density. Major and minor amounts of adsorbed masses were found for intermediates and extremes values of ionic strength, respectively. The electrostatic interactions were considered the main cause of the adsorption on charged surfaces. However, the electrostatic screening was considered the explanation for the low values of adsorbed mass at higher values of ionic strength.

Title: Self-assembly of polymers with amphiphilic compounds (surfactants) in aqueous solutions Abstract: This PhD Thesis is devoted to the co-assembly in systems containing electrically charged polymers (polyelectrolytes and block copolymers containing polyelectrolyte sequences). I studied the interactions between block copolymers and oppositely charged surfactants in aqueous solutions, and the structure and properties of co-assembled nanoparticles by a combination of several experimental methods. I found that the spontaneous formation, solubility and stability of complex nanoparticles depend not only on the electrostatic attractive forces but also on the hydrophobic effects. In a major part of my Thesis, I studied the interaction of polyelectrolytes with oppositely charged gemini surfactants (containing two charged head-groups interconnected by a short linker and two hydrophobic tails) which is a relatively new topic - much less studied than the co-assembly with conventional single tail surfactants. Better understanding of the formation and properties of complexes containing gemini surfactants and polymers provides knowledge that should lead to novel tailor-made nanoparticles with desired properties for applications in medicine and new technologies (including nano-technologies). We have shown that the...

Establishing highly sophisticated polymer films for delivery systems in a biological environment and bioanalytical tasks, the formation, thickness, swelling behavior, and (physiological) stability of highly biocompatible polyelectrolyte multilayers (PEMs) are described. These PEMs are composed of the very weak polycation maltose-modified hyperbranched poly(ethyleneimine) (PEI-Mal), strongly polyanion heparin sodium salt (HE − Na +) or weakly charged polyanion hyaluronic acid sodium salt (HA-Na+) deposited on Si wafer substrates. Two different glyco architectures for PEI-Mal are used, characterized by two different degrees of maltose decoration on a PEI scaffold. Using three pH-dependent deposition approaches for optimizing the (physiological) PEM stability and swelling, PEMs are characterized by (in situ) ellipsometry, atomic force microscopy (AFM), and (in situ) attenuated total reflection-Fouriertransform infrared (ATR-FTIR). Thus, PEMs reveal significantly different thicknesses, growth mechanisms (linear versus exponential), and swelling behavior in dependence of both the polycation architectures and the deposition protocol. These PEMs will allow the study of their complexation and release properties as preswollen PEMs against anionic drug molecules, adenosine triphosphate sodium salt (ATP), especially under physiological conditions for future drug delivery coatings.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Miniaturization has become a driving force in different areas of technology including microelectronics, sensoric- and bio-technologies and in fundamental science. Because of the well-known limitations of conventional lithographic methods, newly emerging bottom-up approach, utilizing self-assembly of various nanoobjects including single polymer molecules and carbon nanotubes constitutes a very promising alternative for fabrication of ultimately small devices. Carbon nanotubes are attractive materials for nanotechnology and hold much promise to revolutionize fundamental science in a investigation of phenomena, associated with the nanometer–sized objects.It was found in this work that grafted chains of poly(2-vinylpyridine) form a shell covering the carbon nanotubes that makes them dispersible in organic solvents and in acidic water (CNTs-g-P2VP).The positively charged poly(2-vinylpyridine) shell is responsible for the selective deposition of carbon nanotubes onto oppositely charged surfaces. It was established that the deposition CNTs-g-P2VP from aqueous dispersions at low pH is an effective method to prepare ultra-thin films with a tunable density of carbon nanotubes.It was shown that poly(2-vinylpyridine) grafted to carbon nanotubes is a universal support for the immobilization of various nanoclusters at the carbon nanotube's surface. Prussian Blue nanoparticles were selectively attached to the surface of CNTs-g-P2VP.Conducting polymer nanowires are another very promising kind of nanomaterials that could be also suitable for applications in nanodevices and nanosensors. In this work was developed a simple method to control the conformation and orientation of single adsorbed polyelectrolyte molecules by co-deposition with octylamine. A simple chemical route to conductive polypyrrole nanowires by the grafting of polypyrrole from molecules of polystyrensulfonic acid was developed. The dc conductivity of individual polypyrrole nanowires approaches the conductivity of polypyrole in bulk.The conductivity can be described using variable-range hopping model.

Introduction : Les conduits nerveux synthétiques représentent une alternative chirurgicale aux autogreffes dans la réparation des traumatismes aux nerfs périphériques. Afin d’améliorer la régénération nerveuse périphérique, plusieurs biomatériels, tels que la multicouche polyélectrolyte de soie (MPE), et modèles ont été étudiés. Dans le cadre de ma maitrise, nos objectifs de recherche sont d’établir si la MPE de soie permet d’améliorer la régénération nerveuse périphérique in vivo et si notre nouveau modèle de conduit (« jelly roll ») peut mener à une meilleure régénération du nerf sciatique chez le rat que le modèle de conduit creux. Méthodes : Dans cette étude, une technique chirurgicale in vivo de lacération et de réparation du nerf sciatique chez le rat fut utilisé. Cinq conditions expérimentales de conduits (autogreffe, conduit creux avec et sans MPE de soie et « jelly roll » avec et sans MPE de soie) furent implantées (n= 2 rats par condition). Après 4 semaines, les conduits furent récupérés et marqués par immunohistochimie avec le neurofilament et la protéine basique de la myéline (MBP). La performance de chaque conduit fut évaluée par sa capacité à supporter l’excroissance axonale à travers le long du conduit et à travers la largeur de ce dernier à divers endroits. Résultats : Chaque condition expérimentale a supporté une régénération axonale avec différents degrés de succès. Globalement, l’autogreffe a supporté une plus longue croissance de fibres. De plus, la surface de fibres obtenue était plus large que les autres conditions. Les conduits avec la MPE de soie ont eu une performance similaire à leurs homologues sans soie. De plus, le modèle de conduit creux a mené à une meilleure régénération axonale que le modèle du « jelly roll ». Conclusion : L’autogreffe demeure le meilleur conduit pour supporter la régénération nerveuse périphérique. Les conduits avec la MPE de soie peuvent supporter une régénération nerveuse similaire aux conduits sans soie tandis que le modèle de « jelly roll » a généré des performances inférieures au modèle de conduit creux. / Background: Synthetic nerve conduits constitute alternative surgical options to autografts in the repair of peripheral nerve injuries. Silk polyelectrolyte multilayer (PEM) as a biomaterial and novel conduit designs have been proposed to improve peripheral nerve regeneration. In my master’s project, my objective is to assess whether silk PEM can improve peripheral nerve regeneration in vivo and to assess whether our novel conduit design (“jelly roll”) can better support rat sciatic nerve regeneration than a hollow conduit design. Methods: In this study, an in vivo rat model of sciatic nerve laceration and repair was used. Five experimental conduit conditions (autograft, hollow conduit with and without silk PEM, and jelly roll with and without silk PEM) were implanted (n=2 rats per condition). After 4 weeks, the conduits were harvested and immuno-stained for neurofilament and myelin basic protein (MBP). Conduit performance was assessed by its ability to support axonal outgrowth throughout the conduit’s length and at various locations along its width. Results: Each condition supported axonal regeneration at varying levels of success. Overall, the autograft group outperformed all other groups by supporting the longest and widest occupying regenerating fibers. Conduits with silk PEM performed similarly to conduits without silk PEM. In addition, the hollow conduit design demonstrated better regenerative outcomes than the jelly roll design. Conclusion: The autograft remains the superior conduit to support peripheral nerve regeneration. Conduits with silk PEM support nerve regeneration in the same capacity as non silk-coated conduits while the jelly roll design underperformed in comparison to the hollow conduit design.

The research presented in this dissertation is focused on the construction of complex molecular structures on planar gold and silicon dioxide surfaces using a variety of surface modification techniques, along with thorough surface characterization at each modification step. The dissertation is structured into six separate chapters. In Chapter 1, an introduction to the importance and implications of molecular level surface modification, commonly employed surface modification methods, and available surface characterization techniques is presented. Chapter 2 shows applications of novel methodologies for the functionalization of gold surfaces using alkane dithiol self-assembled monolayers and thiol-ene click chemistry. The resulting functionalized gold substrates demonstrate higher chemical stability than alkanethiol self-assembled monolayers alone and allow spatially controlled functionalization of gold surfaces with light. In Chapter 3, work on tunable hydrophobic surfaces is presented. These surfaces are prepared using a combination of organosilane chemistry, layer-by-layer polyelectrolyte deposition, and thiol-ene chemistry. These hydrophobic surfaces demonstrate high mechanical and chemical stability, even at low pH (1.68). The pinning of water droplets could be tuned on them by the extent of their thermal treatment. Comprehensive surface characterization using X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), spectroscopic ellipsometry, atomic force microscopy, and water contact angles was carried out on the molecular assemblies prepared on gold and silicon dioxide surfaces. Chapters 4 and 5 are focused on the application, data interpretation, and enhancement in sensitivity of different surface characterization methods. In Chapter 4, XPS, ToF-SIMS, and principal components analysis are used to probe a real world corrosion-type problem. This systemic study showed the destruction of a protective coating composed of a nitrilotris(methylene)triphosphonic acid by a low-intensity fluorine plasma. In Chapter 5, enhancement in ToF-SIMS signals is shown via bismuth metal deposition. These surfaces are also probed by spectroscopic ellipsometry using the interference enhancement method. Finally, Chapter 6 concludes this dissertation by describing possible future work.

Yes / A new type of self-assembled polyelectrolyte complex nanocarrier composed of chondroitin (CHON) and protamine (PROT) was designed and the ability of the carriers to bind salmon calcitonin (sCT) was examined. The response of sCT-loaded CHON/PROT NPs to a change in the properties of the liquid medium, e.g. its pH, composition or ionic strength was studied and in vitro peptide release was assessed. The biocompatibility of the NPs was evaluated in Caco-2 cells. CHON/PROT NPs were successfully obtained with properties that were dependent on the concentration of the polyelectrolytes and their mixing ratio. X-ray diffraction determined the amorphous nature of the negatively charged NPs, while those with the positive surface potential were semi-crystalline. sCT was efficiently associated with the nanocarriers (98-100%) and a notably high drug loading (13-38%) was achieved. The particles had negative zeta potential values and were homogenously dispersed with sizes between 60 and 250 nm. CHON/PROT NPs released less than 10% of the total loaded peptide in the first hour of the in vitro release studies. The enthalpy of the decomposition exotherm correlated with the amount of sCT remaining in NPs after the release experiments. The composition of medium and its ionic strength was found to have a considerable influence on the release of sCT from CHON/PROT NPs. Complexation to CHON markedly reduced the toxic effects exerted by PROT and the NPs were compatible and well tolerated by Caco-2 cells.

Hydrogel, semi-interpenetrating polymer network, poly(2-hydroxyethyl methacrylate), diffusion