[ES] Las pilas de combustible de hidrógeno o bioalcohol son una tecnología prometedora para la generación de energía limpia y eficiente en el intento actual de revertir los severos efectos causados por el cambio climático. No obstante, para lograr generalizar su uso, esta tecnología debe optimizarse. Concretamente, la membrana de intercambio de protones es un componente crucial para mejorar su rendimiento general. Esta línea de investigación, entre otras, está incluida en la mayoría de las actuales líneas estratégicas nacionales y europeas con el objetivo de implantar estos sistemas de producción de energía sostenibles en un futuro próximo. En la presente tesis doctoral se presenta un procedimiento robusto y fiable que permite el diseño de membranas de intercambio de protones mediante la caracterización y análisis de varios materiales poliméricos con la intención de predecir su comportamiento en condiciones operativas. En ese sentido, se analizan cuatro tipos diferentes de microestructuras. En el Capítulo 4 se analizan dos series de membranas basadas en copolímeros en bloque sulfonados de estireno-etileno-butileno-estireno (SEBS). La microestructura se ha ajustado para su idoneidad en aplicaciones de pilas de combustible. Posteriormente, se aplica a las muestras un proceso de sulfonación, fotorreticulación UV e hibridación. En el Capítulo 5 se analiza una serie de membranas de poli(alcohol vinílico) (PVA) convenientemente modificadas para su idoneidad como membranas de intercambio de protones en celdas de combustible de metanol directo (DMFC). El análisis se centra en si la reticulación y la sulfonación mediante el uso de SSA mejoran la estabilidad y aumentan la conducción de protones en la estructura de PVA tal y como se esperaba inicialmente. Además, se evalúa el efecto de la adición de óxido de grafeno (GO) en los espectros dieléctricos y la conductividad protónica. En el Capítulo 6 se analizan dos series de membranas a base de copolímero de poli (epiclorhidrina) (PECH) y poli (epiclorhidrina-co-óxido de etileno) (PECH-co-EO). Ambas membranas están modificadas con unidades de 3,4,5-tris[4-(n-dodecan-1-iloxi)benciloxi]benzoato. El análisis se centra en la capacidad de estas membranas para formar canales, promovidos por la orientación térmica, lo que mejora los mecanismos de transferencia de carga y la conductividad de los protones. En el Capítulo 7 se realiza el análisis de una membrana sintetizada a partir de una red adaptable covalente (CAN). La característica más importante de este tipo de polímeros es la presencia de enlaces reversibles en la estructura que les permite mostrar propiedades físicas como la autoreparación, la soldabilidad y la reciclabilidad. Estas propiedades podrían mejorar el ciclo de vida de las membranas de intercambio protónico. El análisis realizado incluye una evaluación de las dos temperaturas más importantes desde el punto de vista viscoelástico, es decir, la transición vítrea Tg y la temperatura de transición de congelación de la topología Tv, y su impacto en la conductividad protónica. Como resultado de este estudio, se desarrolla una metodología para analizar diversas membranas poliméricas con diferentes microestructuras mediante Análisis Térmico Dieléctrico (DETA). En consecuencia, el estudio de las propiedades dieléctricas, en términos de la permitividad compleja (ε∗), junto con el análisis de la conductividad compleja (σ∗), permite obtener información sobre la dinámica molecular que favorece eficientemente los mecanismos de transferencia de carga. La conductividad protónica (σprot) se estimará a partir de los datos dieléctricos, lo que permitirá evaluar las membranas poliméricas ensayadas para su aplicación como membranas de intercambio protónico. En consecuencia, se puede optimizar el funcionamiento de las membranas de intercambio de protones, y se promueve su implementación masiva. / [CA] Les piles de combustible d'hidrogen o bioalcohol són una tecnologia prometedora per a la generació d'energia neta i eficient en l'intent actual de revertir els severs efectes causats pel canvi climàtic. No obstant això, per a aconseguir generalitzar el seu ús, aquesta tecnologia ha d'optimitzar-se. Concretament, la membrana d'intercanvi de protons és un component crucial per a millorar el seu rendiment general. Aquesta línia d'investigació, entre d'altres, està inclosa en la majoria de les actuals línies estratègiques nacionals i europees amb l'objectiu d'implantar aquests sistemes de producció d'energia sostenibles en un futur pròxim. En la present tesi doctoral es presenta un procediment robust i fiable que permet el disseny de membranes d'intercanvi de protons mitjançant la caracterització i anàlisi de diversos materials polimèrics amb la intenció de predir el seu comportament en condicions operatives. En aqueix sentit, s'analitzen quatre tipus diferents de microestructures. En el Capítol 4 s'analitzen dues sèries de membranes basades en copolímers en bloc sulfonats d'estiré-etilé-butilé-estiré (SEBS). La microestructura s'ha ajustat per a la seua idoneïtat en aplicacions de piles de combustible. Posteriorment, s'aplica a les mostres un procés de sulfonació, fotorreticulació UV i hibridació. En el Capítol 5 s'analitza una sèrie de membranes de poli(alcohol vinílic) (PVA) convenientment modificades per a la seua idoneïtat com a membranes d'intercanvi de protons en cel·les de combustible de metanol directe (DMFC). L'anàlisi se centra en si la reticulació i la sulfonació mitjançant l'ús de SSA milloren l'estabilitat i augmenten la conducció de protons en l'estructura de PVA tal com s'esperava inicialment. A més, s'avalua l'efecte de l'addició d'òxid de grafé (GO) en els espectres dielèctrics i la conductivitat protònica. En el Capítol 6 s'analitzen dues sèries de membranes a base de copolímer de poli (epiclorhidrina) (PECH) i poli (epiclorhidrina-co-òxid d'etilé) (PECH-co-EO). Totes dues membranes estan modificades amb unitats de 3,4,5-tris[4-(n-dodecan-1-iloxi)benciloxi] benzoato. L'anàlisi es centra en la capacitat d'aquestes membranes per a formar canals, promoguts per l'orientació tèrmica, la qual cosa millora els mecanismes de transferència de càrrega i la conductivitat dels protons. En el Capítol 7 es realitza l'anàlisi d'una membrana sintetitzada a partir d'una xarxa adaptable covalent (CA). La característica més important d'aquesta mena de polímers és la presència d'enllaços reversibles en l'estructura que els permet mostrar propietats físiques com l'autoreparació, la soldabilitat i la reciclabilitat. Aquestes propietats podrien millorar el cicle de vida de les membranes d'intercanvi protònic. L'anàlisi realitzada inclou una avaluació de les dues temperatures més importants des del punt de vista viscoelàstic, és a dir, la transició vítria Tg i la temperatura de transició de congelació de la topologia Tv, i el seu impacte en la conductivitat protònica. Com a resultat d'aquest estudi, es desenvolupa una metodologia per a analitzar diverses membranes polimèriques amb diferents microestructures mitjançant Anàlisi Tèrmic Dielèctric (DETA). En conseqüència, l'estudi de les propietats dielèctriques, en termes de la permitivitat complexa (ε∗), juntament amb l'anàlisi de la conductivitat complexa (σ∗), permet obtindre informació sobre la dinàmica molecular que afavoreix eficientment els mecanismes de transferència de càrrega. La conductivitat protònica (σprot) s'estimarà a partir de les dades dielèctriques, la qual cosa permetrà avaluar les membranes polimèriques assajades per a la seua aplicació com a membranes d'intercanvi protònic. En conseqüència, es pot optimitzar el funcionament de les membranes d'intercanvi de protons, i es promou la seua implementació massiva. / [EN] Hydrogen or bioalcohol fuel cells are a promising technology for clean and efficient energy generation in the current attempt to reverse the severe effects caused by climate change. However, in order to achieve its general use, this technology must be optimized. Specifically, the proton exchange membrane is a crucial component to improve your overall performance. This line of research, among others, is included in most of the current national and European strategic lines with the aim of implementing these sustainable energy production systems in the near future. In this doctoral thesis, a robust and reliable procedure is presented that allows the design of proton exchange membranes through the characterization and analysis of various polymeric materials with the intention of predicting their behaviour under operating conditions. In this sense, four different types of microstructures are analysed. In Chapter 4, two series of membranes based on sulfonated block copolymers of styrene-ethylene-butylene-styrene (SEBS) are discussed. The microstructure has been adjusted for its suitability in fuel cell applications. Subsequently, a sulfonation, UV photocrosslinking, and hybridization process are applied to the samples. In Chapter 5, a series of polyvinyl alcohol (PVA) membranes suitably modified for their suitability as proton exchange membranes in direct methanol fuel cells (DMFC) are discussed. The analysis focuses on whether crosslinking and sulfonation using SSA improve stability and increase proton conduction in the PVA structure as initially expected. In addition, the effect of the addition of graphene oxide (GO) on the dielectric spectra, and proton conductivity is evaluated. In Chapter 6 two series of membranes based on copolymers of poly (epichlorohydrin) (PECH) and poly (epichlorohydrin-co-ethylene oxide) (PECH-co-EO) are analysed. Both membranes are modified with 3,4,5-tris[4-(n-dodecan-1-yloxy)benzyloxy]benzoate units. The analysis focuses on the ability of these membranes to form channels, promoted by thermal orientation, which improves the charge transfer mechanisms and the proton conductivity. In Chapter 7, the analysis of a membrane synthesized from a covalent adaptive network (CAN) is performed. The most important characteristic of this type of polymer is the presence of reversible bonds in the structure that allows them to display physical properties such as self-healing, weldability, and recyclability. These properties could improve the life cycle of proton exchange membranes. The analysis carried out includes an evaluation of the two most important temperatures from the viscoelastic point of view, that is, the glass transition Tg and the freezing transition temperature of the topology Tv, and their impact on the proton conductivity. As a result of this study, a methodology is developed to analyse various polymeric membranes with different microstructures by means of Dielectric Thermal Analysis (DETA). Consequently, the study of the dielectric properties, in terms of the complex permittivity (σ∗), together with the analysis of the complex conductivity (ε∗), allows us to obtain information on the molecular dynamics that efficiently favour the charge transfer mechanisms. The proton conductivity (σprot) will be estimated from the dielectric data, which will allow the evaluation of the tested polymeric membranes for their application as proton exchange membranes. Consequently, the functioning of proton exchange membranes can be optimized, and their massive implementation is promoted. / Pascual José, B. (2023). Design and Characterization of Polymeric Materials for their Application as Electrolytes in Fuel Cells [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/196863

Um polieletrólito catiônico (poliamina), com baixo peso molecular e elevada densidade de carga, normalmente aplicado como agente coagulante do lixo aniônico, foi usado para estudos de retenção e drenagem na fabricação de papel. O uso do carboximentil celulose de sódio para simulação do teor de lixo aniônico e seu efeito na retenção de cargas minerais foi uma característica importante para este trabalho. Pode ser observado que o aumento da dosagem do polímero catiônico tanto melhora a retenção de cargas minerais, avaliada pela turbidez do filtrado, quanto melhora a drenagem do sistema, avaliada pela velocidade de escoamento. Entretanto, elevadas dosagens deste polímero comprometeram os resultados destes parâmetros devido à inversão de carga do sistema. Pode também ser confirmado que forças de cisalhamento excessivas prejudicam a retenção de cargas minerais. Ademais, um polianfótero, com peso molecular e densidade de carga elevados, contendo grupos positivo (N-[3-(N,N-dimetilamino)propil]acrilamida), negativo (ácido metileno butanodióico) e nulo (acrilamida) na mesma cadeia, foi testado como agente de resistência a seco do papel. Todos os estudos em nível molecular sobre o comportamento do polianfótero em solução e o seu comportamento de adsorção sobre superfícies modelos carregadas, em diferentes condições de pH e de força iônica, foram importantes para explicar tanto dos fenômenos de adsorção, envolvendo fibras celulósicas e polianfótero, quanto o seu efeito na resistência mecânica do papel. Foi observado que a solubilidade do polímero aumenta à medida que o pH se distancia do seu ponto isoelétrico, pHPIE 7,3, e reduz para valores de pH próximos ao pHPIE. O tamanho das estruturas do polianfótero depende do pH do meio de dispersão. As características de tamanho do polianfótero tanto sob a forma de cadeias individuais ou quanto sob a forma de agregados, foram medidas através da técnica de espalhamento dinâmico de luz. As propriedades viscoelásticas das camadas adsorvidas e a quantidade de polímero adsorvida foram medidas através da técnica da balança microgravimétrica com dissipação de energia. Estas duas determinações, associadas às imagens no microscópio de força atômica, foram importantes para o entendimento dos resultados práticos do uso do polianfótero como agente de resistência a seco do papel. Maiores resultados de resistência do papel, avaliada através da resistência à tração, foram alcançados para valores de pH próximos ao ponto isoelétrico onde foram encontrados o seguinte: (1) maiores tamanhos para as estruturas do polímero em solução, (2) maior quantidade de massa nas camadas adsorvidas e (3) a formação de camadas mais viscoelásticas. O fenômeno de separação de fases, associado à mudança da solubilidade do polímero em solução devido ao balanço dos grupos positivos e negativos ionizados ao longo da faixa de pH estudada, foi considerado o principal aspecto para a variação em tamanho dos agregados. Embora este polímero tenha apresentado comportamento antipolieletrólito devido à expansão da sua cadeia e ao aumento da densidade de carga com o aumento da força iônica, considerando o efeito da força iônica para pH 4,3, o comportamento de adsorção do polianfótero foi avaliado como o comportamento de um polieletrólito monocarregado de alta densidade de carga. Maiores e menores quantidades de massas adsorvidas foram encontradas para valores intermediários e extremos de força iônica, respectivamente. As interações eletrostáticas foram consideradas as principais responsáveis pela adsorção do polímero sobre superfícies carregadas. Entretanto, a blindagem de cargas foi considerada a explicação para os baixos valores de massa adsorvida para valores mais elevados de força iônica. / A cationic polyelectrolyte (polyamine), with low molecular weight and high charge density, usually applied as anionic trash coagulant, was used for the retention and drainage studies in the papermaking. The use of sodium carboxymethyl cellulose to simulate the anionic trash content and its effect on the filler retention was an important feature of the work. It could be noted that the increasing of the cationic polymer dosage improves both the filler retention, evaluated by the turbidity of the filtrate, and the system drainage, evaluated by the flow speed. However, high dosages of this polymer compromised the results of these parameters due to the reversal of the system charge. It can also be confirmed that excessive shear forces affect the filler retention. Furthermore, a polyampholyte, with high molecular weight and charge density, containing positive (N-[3-(N,N- dimethylamino)propyl]acrylamide), negative (methylene butanedioic acid), and neutral (acrylamide) groups in the same chain, was tested as a dry strength agent. All of the studies at molecular level concerning to the polyampholyte behavior in the solution and its adsorption behavior on charged model surfaces at different conditions of pH and ionic strength, were important to explain both the adsorption phenomena, involving cellulosic fibers and polyampholyte, and its impact on the paper strength. It was observed that the polymer solubility increases as the pH moves away from its isoelectric point, pHIEP 7.3, and decreases when the pH approaches close to pHIEP. The sizes of the structures of the polyampholytes depend on the pH of the dispersion medium. Also the size characteristics of polyampholyte, both in individual and aggregated forms, were measured by dynamic light scattering technique. The viscoelastic properties of adsorbed layers, as well as the amount of the adsorbed polymer, were measured by quartz crystal microbalance technique with energy dissipation. These two measurements, associated with the atomic force microscopy images, were important to understand the practical results of polyampholyte usage as a dry strength agent. Best results of paper strength, evaluated by paper strength index, were achieved at pH close to the isoelectric point on which one were found the following features: (1) larger sizes of the polymer structures in solution, (2) higher amount of mass in the adsorbed layers, and (3) the formation of more viscoelastic layers. The phase separation phenomenon, associated with the change in the solubility of the polymer due to the balance of the positive and negative groups throughout the studied pH range, was considered the main aspect for the variation in size of the aggregates. Although this polymer shows antipolyelectrolyte behavior due to the expansion of the its chain and the increasing in charge density with the ionic strength, considering the effect of ionic strength at pH 4.3, the adsorption behavior of polyampholyte was evaluated as a monocharged polyelectrolyte behavior with high charge density. Major and minor amounts of adsorbed masses were found for intermediates and extremes values of ionic strength, respectively. The electrostatic interactions were considered the main cause of the adsorption on charged surfaces. However, the electrostatic screening was considered the explanation for the low values of adsorbed mass at higher values of ionic strength.

In dieser Arbeit wurden zwei katalytische Modellreaktionen studiert. Zunächst die katalytische Reduktion von p-Nitrophenol (Nip) mit Natriumborhydrid (BH_4^-). Diese verläuft entlang der direkten Route: Dabei wird Nip über p-Hydroxylaminophenol (Hx) zum Produkt p-Aminophenol (Amp) reduziert. Ein kinetisches Modell wird vorgestellt, dass die Reaktion auf Basis des Langmuir-Hinshelwood (LH) Mechanismus beschreibt. Die Lösung der Gleichungen gibt die Nip Konzentration als Funktion der Zeit, welche direkt mit den experimentellen Daten verglichen werden kann. Werden als Katalysator auf sphärischen Polyeletrolytbürsten stabilisierte Gold Nanopartikel (SPB-Au) verwendet, zeigt sich eine gute Übereinstimmung und unterstreicht die Allgemeingültigkeit der direkten Route. Der zweite Teil beschäftigt sich mit der katalytischen Oxidation von 3,3’,5,5’-Tetramethylbenzidin (TMB) durch Wasserstoffperoxid (H_2O_2) an SPB-Pt Nanopartikeln. Dabei wurden die Katalyse mithilfe zweier Modelle analysiert: Michaelis-Menten (MM) und Langmuir-Hinshelwood (LH). Im MM Modell wird die Oxidation von TMB durch die Nanopartikel mit der Peroxidase katalysierten TMB Oxidation unter Annahme des Ping-Pong Mechanismus verglichen. Es wurde gezeigt, dass die häufig verwendete Analyse der initialen Reaktionsraten große Fehler verursacht und zu inkonsistenten Ergebnissen führt. Dies zeigt dass dieses Vorgehen zu Analyse der Oxidation von TMB nicht geeignet ist. Im LH Modell wird angenommen dass H_2O_2 und TMB im ersten Schritt auf der Oberfläche der Nanopartikel adsorbieren. Das LH Modell mit Produktinhibition ermöglicht hierbei eine zufriedenstellende Beschreibung der kinetischen Daten bis zu einem Umsatz von 40 %. Die gesamte Analyse zeigt, dass das Langmuir-Hinshelwood Modell die bessere Näherung zur Beschreibung der Kinetik der Nanopartikel katalysierten TMB Oxidation bietet / In this work, two catalytic model reactions were studied using different metallic nanoparticles in aqueous solution. One is the catalytic reduction of p-nitrophenol (Nip) by sodium borohydride (BH_4^-). The reaction proceeds in the following route: Nip is first reduced to p-hydroxylaminophenol (Hx) which is further reduced to the final product p-aminophenol (Amp). Here we present a full kinetic scheme according to Langmuir-Hinshelwood mechanism (LH). The solution of the kinetic equations gives the concentration of Nip as the function of time, which can be directly compared with the experimental data. Satisfactory agreement is found for reactions catalyzed by Au nanoparticles immobilized in spherical polyelectrolyte brushes (SPB-Au) verifying the validity of the reaction route. In the second part, we present a study on the catalytic oxidation of 3,3’,5,5’-tetramethylbenzidine (TMB) by hydrogen peroxide (H_2O_2) with SPB-Pt nanoparticles. The catalysis was analyzed by two different models: Michaelis-Menten (MM) and Langmuir-Hinshelwood (LH) model. In the MM model, the oxidation of TMB catalyzed by nanoparticles is inferred to the catalysis of peroxidase assuming the Ping-Pong mechanism. It is found that the frequently used analysis with the initial rates introduces large errors and leads to inconsistent results, which indicates that such approach is not suitable to analyze the oxidation of TMB catalyzed by nanoparticles. In the LH model, it is assumed that H_2O_2 and TMB adsorb on the surface of nanoparticles in the first step. The LH model with product inhibition gives satisfactory description of the kinetic data up to a conversion of 40%. The entire analysis demonstrates that the Langmuir-Hinshelwood model provides a superior approach to describe the kinetics of TMB oxidation catalyzed by nanoparticles.

Proteinadsorption ist in vielen biotechnologischen Anwendungen ubiquitär und ein zentrales Forschungsfeld in der Physik der weichen Materie. Das Verstehen der treibenden Kräfte hinter der Proteinadsorption würde zu einer besseren Kontrolle des Adsorptionsprozesses führen und die Entwicklung von Biosystemen mit beispielloser Funktionalität ermöglichen. In der vorliegenden Arbeit wird die Proteinadsorption an weichen polymerartigen Biomaterialien sowie deren physikalische Wechselwirkungen unter Verwendung von zwei unterschiedlichen neu entwickelten Ansätzen theoretisch untersucht. Im ersten Teil wird ein neues mehrkomponentiges kooperatives Bindungsmodell entwickelt, um die Gleichgewichts-Adsorption von Proteinen auf Mikrogelen zu beschreiben. Es war somit möglich, die wahre treibende Kraft der Proteinadsorption zu identifizieren, die hauptsächlich elektrostatischen Ursprungs ist. Eine Errungenschaft des kooperativen Bindungsmodells ist die Vorhersage der kompetitiven Proteinadsorption und -desorption auf das Mikrogel, die auf thermodynamischen Parametern der Adsorption von Proteinen einzelner Sorten basiert. Vergleiche zwischen Experimenten mit binären Proteinmischungen und theoretischen Berechnungen zeigten sehr gute Übereinstimmungen. Der zweite Teil fokussiert auf Protein-Wechselwirkungen mit Polyelektrolyten, um Adsorptionsprozesse auf mikroskopischer Ebene zu erklären. Dafür wurden geladene fleckige Partikel konstruiert und als Proteinmodelle verwendet, während ein einfaches Kugel-Feder-Modell für das Polyelektrolyt und Polyelektrolytbürste benutzt wurde. Ein zentraler Aspekt war die Bestimmung der freien Energie, das Potential der mittleren Kraft (PMF), für die Komplexbildung der beiden Bestandteile mit Vergleichen zur Modellentwicklungen. Die Simulationsergebnisse legen ein komplexes Wechselspiel von elektrostatischen Kräften und Ionenfreisetzungsmechanismen dar, die für die starken attraktiven Wechselwirkungen in den PMFs verantwortlich sind. / Protein adsorption is ubiquitous in many biotechnological applications and has become a central research field in soft matter. Understanding the driving forces behind protein adsorption would allow a better control of the adsorption process and the development of biosystems with unprecedented functionality. In this thesis, protein adsorption onto soft polymeric biomaterials and their physical interactions is studied theoretically by using two different and newly developed approaches. In the first part, a novel multi-component cooperative binding model is developed to describe the equilibrium adsorption of proteins onto microgels. It was thus possible to correctly identify the true driving force behind the protein adsorption which was found to be mainly of electrostatic origin. A key achievement by the cooperative binding model is the prediction of competitive protein adsorption and desorption onto the microgel that is based on thermodynamic parameters related to single-type protein adsorption without any variable parameters. Comparisons between experimental data of binary protein mixtures and theoretical calculations have shown excellent agreements. The second part is focused on protein interactions with polyelectrolyte materials to elucidate adsorption processes on a microscopic level. For this purpose, charged patchy particles are constructed and used as protein models while a simple bead-spring model is employed for the polyelectrolyte and polyelectrolyte brush. A central aspect was the determination of the associated free energy, the potential of mean force (PMF), on the complex formation between the two constituents with comparisons to theoretical model developments. The simulation results evidenced a complex interplay of electrostatic forces and ion release mechanisms to be responsible for the strong attractive interactions observed in the PMFs.

La première partie de cette thèse est une étude expérimentale de l'adsorption de complexes polyélectrolytes/tensioactifs de charge opposée à l'interface eau-air à l'aide la tensiométrie, l'ellipsométrie et l'observation de drainage de films de savon. Ces complexes peuvent former des globules hydrophobes s'adsorbant en des couches épaisses et hétérogènes, aux temps de réarrangement très longs. La structure et l'épaisseur des couches dépend fortement du ratio des concentrations tensioactif/polyélectrolyte et de l'hydrophobie du tensioactif, qui permettent de modifier l'affinité des complexes pour la surface. De plus, la masse moléculaire du polyélectrolyte contrôle la taille des complexes formés. La deuxième partie traite de la rhéologie de surface en cisaillement et en dilatation de ces couches de complexes. Les mesures montrent la formation de gels physiques mous de surface. Enfin, nous présentons les détails de la construction d'un viscosimètre magnétique de surface.

Miniaturization has become a driving force in different areas of technology including microelectronics, sensoric- and bio-technologies and in fundamental science. Because of the well-known limitations of conventional lithographic methods, newly emerging bottom-up approach, utilizing self-assembly of various nanoobjects including single polymer molecules and carbon nanotubes constitutes a very promising alternative for fabrication of ultimately small devices. Carbon nanotubes are attractive materials for nanotechnology and hold much promise to revolutionize fundamental science in a investigation of phenomena, associated with the nanometer–sized objects.It was found in this work that grafted chains of poly(2-vinylpyridine) form a shell covering the carbon nanotubes that makes them dispersible in organic solvents and in acidic water (CNTs-g-P2VP).The positively charged poly(2-vinylpyridine) shell is responsible for the selective deposition of carbon nanotubes onto oppositely charged surfaces. It was established that the deposition CNTs-g-P2VP from aqueous dispersions at low pH is an effective method to prepare ultra-thin films with a tunable density of carbon nanotubes.It was shown that poly(2-vinylpyridine) grafted to carbon nanotubes is a universal support for the immobilization of various nanoclusters at the carbon nanotube's surface. Prussian Blue nanoparticles were selectively attached to the surface of CNTs-g-P2VP.Conducting polymer nanowires are another very promising kind of nanomaterials that could be also suitable for applications in nanodevices and nanosensors. In this work was developed a simple method to control the conformation and orientation of single adsorbed polyelectrolyte molecules by co-deposition with octylamine. A simple chemical route to conductive polypyrrole nanowires by the grafting of polypyrrole from molecules of polystyrensulfonic acid was developed. The dc conductivity of individual polypyrrole nanowires approaches the conductivity of polypyrole in bulk.The conductivity can be described using variable-range hopping model.

Establishing highly sophisticated polymer films for delivery systems in a biological environment and bioanalytical tasks, the formation, thickness, swelling behavior, and (physiological) stability of highly biocompatible polyelectrolyte multilayers (PEMs) are described. These PEMs are composed of the very weak polycation maltose-modified hyperbranched poly(ethyleneimine) (PEI-Mal), strongly polyanion heparin sodium salt (HE − Na +) or weakly charged polyanion hyaluronic acid sodium salt (HA-Na+) deposited on Si wafer substrates. Two different glyco architectures for PEI-Mal are used, characterized by two different degrees of maltose decoration on a PEI scaffold. Using three pH-dependent deposition approaches for optimizing the (physiological) PEM stability and swelling, PEMs are characterized by (in situ) ellipsometry, atomic force microscopy (AFM), and (in situ) attenuated total reflection-Fouriertransform infrared (ATR-FTIR). Thus, PEMs reveal significantly different thicknesses, growth mechanisms (linear versus exponential), and swelling behavior in dependence of both the polycation architectures and the deposition protocol. These PEMs will allow the study of their complexation and release properties as preswollen PEMs against anionic drug molecules, adenosine triphosphate sodium salt (ATP), especially under physiological conditions for future drug delivery coatings.

Here, we report on a new temperature responsive polymer brush system with a terminal “click” functionality. Bifunctionalized poly(N-isopropylacrylamide) (PNiPAAm) with distinct functional end groups was synthesized by atom transfer radical polymerization (ATRP) and grafted to a modified silicon substrate. The presence of the active terminal alkyne functionality is validated using an azide-modified rhodamine B (N3-RhB) via copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The optical properties and swelling dynamics of an N3-RhB modified PNiPAAm brush are analyzed in dry state and in situ by VIS-spectroscopic ellipsometry (SE). The best-fit results are obtained using a Gaussian oscillator model and are confirmed by UV/VIS-spectroscopy. We observed evidence of interactions between the aromatic residues of the dye and the PNiPAAm amide groups, which significantly affect the swelling behavior of the modified polymer brush. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Ma thèse a porté sur des complexes de polyélectrolytes en solution et en films LbL pour la transfection de cellules et le contrôle des interactions cellule-surface. Il est possible de doser un agent de transfection et de l'ADN plasmidique dans des films LbL en ajustant le nombre de couches. Les efficacités de transfection avec différentes lignées cellulaires ont été au moins aussi bonnes que celles rapportées dans la littérature, mais sont restées globalement faibles. Différents nanobags ont également été systématiquement testés menant à un protocole de transfection très efficace avec une faible cytotoxicité pour des fibroblastes humains qui sont difficiles à transfecter. Nous avons pu identifier les architectures LbL qui permettent de contrôler l'adhésion cellulaire même en présence de sérum. Cela nous a permis d'introduire une nouvelle technique pour le suivi in situ de la transfection par QCM-D en suivant la mobilité du cytosquelette qui sera poursuivie dans un futur projet. / My PhD work was focused on polyelectrolyte complexes in bulk and in LbL-films for cell transfection and for controlling cell-surface interactions. It is possible to dose transfection agent and plasmid DNA in LbL-films by adjusting the number of layers. Transfection efficiencies with different cell lines were at least as good as reported in the literature, but remained overall weak. Different nanobags were also tested systematically leading to a highly efficient transfection protocol with low cytotoxicity for human fibroblasts which are difficult to transfect. We were able to identify multilayer architectures that allow to control cell adhesion even in the presence of serum. This allowed us also to introduce a new technique for the in-situ monitoring of transfection by QCM-D through monitoring cytoskeleton mobility which will be further pursued in a future research project.

Polyelectrolyte multilayer capsules fabricated by layer-by-layer (LbL) self-assembly technique consistsing of core-shell structure have emerged as potential drug delivery systems along with their applications in micro-reactors, cosmetics, vaccines and antimicrobial coatings. Various ligands and stimuli responsive entities can be incorporated into the core and shell of the capsules for targeted delivery and/or controlled release applications. Though multilayer capsules have been studied extensively as delivery systems, their utility for encapsulation of hydrophobic drugs and multiple drugs have not been explored in detail so far. Application of traditional polyelectrolyte capsules has several limitations, which renders them inapplicable for encapsulation of multiple drugs, hydrophobic drugs and also for releasing drugs on demand without addition of the external photothermal agents such as metal nanoparticles into the shells of the capsules. Thus, in this thesis, an attempt has been made to develop novel multifunctional multilayered capsules to overcome the above mentioned limitations. We have formulated two novel methods to functionalize the core with cyclodextrin molecules and the shell of the capsules with two-dimensional material, graphene oxide (GO). The properties such as high surface area along with π bonds, broad NIR-absorption, superior photothermal conversion and antimicrobial activity of graphene oxide has been explored and it has been demonstrated that 2-D graphene oxide is unique compared to the regular polyelectrolytes. By functionalizing the shell of capsules with GO as one of the layer material, a simple and efficient way for encapsulating multiple drugs into core and shell of the capsules is achieved by utilizing the large surface area and amphiphilic nature of GO. Based on the unique optical absorption and photothermal conversion properties of GO, we have demonstrated a facile route for near-infrared (NIR)-laser triggered release with low laser power. In the second part, functionalization of the hollow core of the capsules has been functionalized using cylodextrin (CD)-incorporated CaCO3 porous sacrificial templates, where both CD-CaCO3 and CD-modified capsules are used as high efficient carriers for hydrophobic drugs. In the third part, synergistic antimicrobial therapy was achieved using composite graphene oxide/polymer LbL films by combining the intrinsic antimicrobial activity and photothermal conversion ability of graphene oxide and the results depicted superior antimicrobial activity towards E. coli. These composite films also can be used as efficient antimicrobial coatings on biomedical devices or implants. The thesis has been divided into five chapters based on the individual works. In Chapter 1, a brief review on the history of LbL self-assembly, mechanism of self-assembly along with factors affecting the process have been discussed. Followed by a brief discussion about the fabrication of multilayered hollow capsules (core-shell structure), their applications in drug delivery and fabrication of multifunctional multilayered capsules through core and shell have been discussed. Finally, recent developments in LbL self-assembly and multilayered hollow capsules using carbon based materials (fullerenes, carbon nanotubes and graphene oxide) and their biomedical applications have been presented. Chapter 2 deals with the study on fabricating multifunctional multilayered capsules for facile encapsulation of multiple drugs into the capsules, which is achieved by functionalizing the capsules with graphene oxide (GO) as one of the layer materials. The GO composite capsules exhibited unique permeability properties compared to traditional multilayered capsules made of two polyelectrolytes. Multiple drugs could be simultaneously encapsulated in the capsules in a simple and effective manner. These capsules were found to exhibit a “core-shell” loading property for encapsulation of dual drugs into the core and shell of the capsules respectively. In addition, the graphene oxide composite capsules showed excellent biocompatibility towards MCF-7 cells. This study is the first one that demonstrates the potential of hybrid polyelectrolyte capsules without the use of micelles or polymer-drug conjugates for multi-drug encapsulation. Chapter 3 deals with the development of a facile route for near-infrared (NIR)-light triggered release of encapsulated drugs from the multilayered capsules via incorporation of graphene oxide (GO) into layer-by-layer (LbL) assembled capsules without addition of any external additives such as metal nanoparticles (NPs) or carbon nanotubes (CNTs) into the shells of the capsules. Till now, there is no report on light-responsive drug delivery system by utilizing the NIR-optical absorption properties of GO. Here, graphene oxide (GO) plays a dual role, serving as a structural component of LbL capsules as well as strong NIR-light absorbing agent, which efficiently converts absorbed light into heat. Upon NIR-laser irradiation, the microcapsules were opened in “point-wise fashion” due to local heating caused by laser irradiation. The rupturing mechanism of the capsules has been clearly demonstrated using confocal fluorescence microscopy and high resolution transmission electron microscopy. The light-triggering ability of these capsules has been applied successfully to release the encapsulated anticancer drug, doxorubicin. Chapter 4 deals with simple and versatile simple routes for encapsulation of model hydrophobic drug. Encapsulation of hydrophobic drugs in pharmaceutical industries is always a big challenge due to limited number of available drug carrier systems and poor aqueous solubility of hydrophobic drugs. Here, by combining the special properties of cyclodextrins (CDs) with biodegradable inorganic calcium carbonate microparticles, the hybrid CD-CaCO3 mesoporous microparticles have been prepared for the first time. These CD-CaCO3 microparticles were utilized as sacrificial templates to prepare CDs-modified LbL capsules. We have demonstrated that both the hybrid CD-CaCO3 microparticles and CDs-modified capsules are potential carriers for encapsulation of model hydrophobic drugs (self-fluorescent coumarine and nile red dyes) with high loading efficiency using supramolecular host-guest interaction between entrapped CDs and hydrophobic dye molecules. Compared with other inorganic drug carrier systems (mesoporous silica), CaCO3 porous particles have better biocompatibility, biodegradability and cost-effective and without use of any organic solvents. Both these hybrid CD-CaCO3 microparticles and CDs-modified capsules can be good candidates for encapsulation of hydrophobic drugs without involving extreme chemical conditions for fabrication. Chapter 5 deals with development of facile synergistic method for killing pathogenic bacteria by combining the intrinsic antimicrobial activity of graphene oxide (GO) and unique photothermal conversion property of GO into a single material. We fabricated composite LbL films of graphene oxide (GO) and poly(allylamine hydrochloride) (PAH) films. Antimicrobial activity of these GO composite films has been studied using Escherichia coli (E. coli) cells by varying number of deposited layers on glass slides (20 to 80 layers) and results suggest that by increasing the number of deposited layers, antimicrobial activity is also increased gradually. Based on the unique optical properties of GO, photothermal therapy have been carried out for killing of E. coli using GO composite films by varying number of deposited layers (20 to 80 layers) by irradiation of NIR-pulse laser at 1064 nm wavelength (Nd:YAG, 10 ns pulse, 10 Hz). The photothermal results revealed the enhanced antimicrobial activity compared to GO composite films alone without NIR-laser irradiation. The synergistic photothermal killing ability along with intrinsic antimicrobial activity of GO films results in much faster killing compared to films alone.