<p>The main ambition of this degree project is to illustrate the fundamental problems of today’s electric tariff regulation and the usage of the analyzing tool; The Network Tariff Model. There is a further discussion of potential problems and clear improvements of the 2012 years proposed network tariff regulation. Interviews have been conducted with specific network companies and Energimarknadsinspektionen. The proposed regulation of 2012 is discussed from the government’s proposition.</p><p>This paper clearly shows that the authority´s work has been conducted in a very unprofessional manner during the period of The Network Tariff Model. Transparency has been missing at the same time when quality control has been almost nonexistent from the authority.</p><p>The regulation itself and the usage of The Network Tariff Model generated substantial criticism. Disagreement about the model was mostly about the use of methods and parameter settings.</p><p>The new regulation of beforehand assessment of network tariffs is scheduled to be commissioned during 2012. This regulation has certain advantages compared to today’s for once because it counts for the actual costs for the corporations. At the same time this particular approach will demand a lot of resources of the authority.</p><p>When the regulating models of the future are being developed legitimacy to all parties must be ensured. The regulations must at the same time be adjusted to the resources available for the grid authority. Likewise the process and nature of putting forward new regulations should be based on continuity to greater extent.</p>

This study was initiated to investigate if it could be feasible to supply offshore oil installations in the North Sea with electrical power from land. A prestudy of alternative converter topologies indicated that the most promising solution would be to investigate a conventional system with reduced synchronous compensator rating. The study starts with a summary of the state of power supply to offshore installations today, and a short review of classical HVDC transmission. It goes on to analyse how a passive network without sources influences the inverter. The transmission, with its current controlled rectifier and large inductance, is simulated as a current source. Under these circumstances the analysis shows that the network frequency has to adapt in order to keep the active and reactive power balance until the controllers are able to react. The concept of firing angle for a thyristor is limited in a system with variable frequency, the actual control parameter is the firing delay time. Sensitivity analysis showed some astonishing consequences. The frequency rises both by an increase in the active and in the reactive load. The voltage falls by an increase in the active load, but rises by an increase in the inductive load. Two different control principles for the system of inverter, synchronous compensator and load are defined. The first takes the reference for the firing delay time from the fundamental voltage at the point of common coupling. The second takes the reference for the firing delay time from the simulated EMF of the synchronous compensator. Of these, the second is the more stable and should be chosen as the basis for a possible control system. Two simulation tools are applied. The first is a quasi-phasor model running on Matlab with Simulink. The other is a time domain model in KREAN. The time domain model is primarily used for the verification of the quasi-phasor model, and shows that quasi-phasors is still a valuable tool for making a quick analysis of the main features when the details of the transients are of less importance. The study indicates that power supply by HVDC transmission from land to offshore oil installations could be technically feasible, even without the large synchronous compensators normally required. It has been shown that in a network only supplied by an inverter, variations of active and reactive loads have significant influence on both voltage and frequency. Particularly it should be noted that the frequency shows a positive sensitivity to increases in load. This could make the system intrinsically unstable in the case of a frequency dependent load such as motors. It was not a part of the study to optimize controllers, but even with simple controllers it was possible to keep the frequency within limits given by norms and regulations, but the voltages were dynamically outside the limits, though not very far. These voltage overswings take place in the first few instances after a disturbance, so it takes unrealistically fast controllers to handle them. They are partly due to the model, where the land based rectifier and the DC reactors are simulated by a constant current source, but partly they have to be handled by overdimensioning of the system. The simulations indicate that it should be technically possible to supply an oil platform with electrical power from land by means of HVDC transmission with small synchronous compensators. Whether this is financially feasible has not been investigated. Neither has it been considered whether the necessary equipment can actually be installed on an oil platform. Recently both ABB and Siemens have presented solutions for HVDC transmission in the lower and medium power range based on voltage source converters based on IGBTs. Fully controllable voltage source HVDC converters have properties that may be better suited than conventional line commutated current source thyristor inverters, to supply weak or passive networks, such as offshore oil installations, with electrical power. But they also have some disadvantages, and a complete technical and financial comparison must be performed in order to decide about any potential project.

Wind power will play a major role in the future energy system in Sweden. Most of the major wind parks are planned to be built in sites where the cold climate and atmospheric icing can cause serious problems. This underlines the importance of addressing these issues. The major cause of these problems is in-cloud icing of the rotor blades due to super cooled liquid droplets of clouds. The droplets freeze upon impact with the rotor blade and form hard rime ice. This rime ice causes disruption in the aerodynamics that leads to production losses, extra loads on the rotor blades and when the ice is shed it poses a safety risk to people in the near environment. This master thesis focuses on how to measure the accretion of ice and the correlation between measured ice and production losses of two wind parks in northern Sweden.   The results show a good correlation between the ice accretion on a stationary sensor and the production loss from a wind turbine. In most icing events the icing of the sensor and large production losses from the wind turbine correlated clearly. Attempts to quantify the production losses at a certain ice rate measured with the stationary sensors was done, however no clear results was produced. The reason for this is that the wind turbines often stop completely during an icing event and that the time series analyzed was too short to be able to quantify the losses at certain wind speed and ice rates.   Recommendations on the type of sensor which should be used was to be produced, however the conclusion was that no single sensor has acted satisfactory and could be recommended to measure ice accretion for wind turbine applications. Due to this, at least two sensors are recommended to increase the redundancy in the measurement system. Modeling ice accretion with standard parameters measured has been done and the results show that the time of icing could be determined quite well when the sensors was ice free, however when the sensors and especially the humidity sensors was iced the time of icing was overestimated.   The main conclusion drawn is that there is a clear relationship between the icing of a stationary sensor and the rotor blade. There is still no which fulfills all demands of measuring ice accretion for wind turbine applications, further it is possible with simple models to roughly determine when icing occurs with standard measurements.

This thesis investigates optimization of the control of electrical and thermal equipment by using FEM and CFD modeling in combination with dynamic simulation models. The thesis focuses on the production of electrical strips and the control system with the aim of reducing losses and improving magnetic properties. Several parameters and factors contribute to core losses. Thickness deviations in strip production, high levels of impurities in the core, orientation, ageing, surface oxidation, overloading, and hot spot temperature are among the reasons for losses in the core. Some of the losses occur during strip cutting and core assembly. This dissertation focuses on the reduction of losses in the cold rolling, annealing and manufacturing stages. The cold rolling process has a direct influence on the accuracy of the strip thickness and magnetic ageing of sheets. Some disturbances such as eccentricity, working rolls gap deviation, shape and edge deflections have to be removed in order to achieve accurate thickness. Thickness measurement makes up an important portion of loss evaluation in electrical equipment. Impurities and dirty strip surfaces in the cold rolling step can increase the carbon content of strips that pass through the annealing furnaces after cold rolling. The slab should be cleaned before reeling and rewinding. As the strip passes through the annealing furnaces, the temperature should be homogenous over the entire strip. According to simulations of furnace and strip temperature computed in the COMSOL environment, homogenous temperatures may be achieved using high electrical power reflectors which are equipped with molybdenum disilicide (MoSi2) electrical heating elements to replace the gas fired burners that are currently used. Modelling of the cold rolling process is conducted in order to find the correlation between control system parameters. A multivariable mathematical model for the rolling process is derived here, which reveals the interactions of the influencing variables. This approach provides numerically efficient algorithms, which are necessary for running in a real-time environment. A control model is applied in the MATLAB environment in order to determine the strip thickness at online-offline state using a robust algorithm. The critical problem in the thickness control loop is analysed, and an adaptive control algorithm is proposed. A number of control methods are investigated to improve the final strip properties. Cold rolled strip thickness deviations, eccentricities and shape defects are compensated for. The simulation results are verified with measurement data and the most significant sources of disturbances are detected. Finally, to solve the hottest spot problem in large scale electric power transformer, a new apparatus, oil spraying, is proposed and analysed. / Denna avhandling behandlar optimering och kontroll av elektrisk och termisk utrustning med hjälp av FEM och CFD-modellering i kombination med dynamiska simuleringsmodeller. Avhandlingen fokuserar på produktion av remsor och styrsystemet i syfte att minska förluster och ge bättre magnetiska egenskaper. Flera parametrar och faktorer bidrar till förluster i kärnan. Tjockleksavvikelser i remsor, höga nivåer av föroreningar i kärnan, orientering, åldrande, yta oxidation, överbelastning och temperaturer i heta punkter finns bland orsakerna till förlusterna i kärnan. Några av de förluster som uppstår under klippning av remsor och ihopsättningen av kärnan. Denna avhandling fokuserar på att minska förlusterna i produktionsstegen för kallvalsning och  glödgning. Kallvalsningen har ett direkt inflytande på riktigheten av remsornas tjocklek och magnetiska åldrande. Vissa störningar i till exempel excentriciteten, gapet mellan valsarna, form och kanter måste minimeras för att uppnå korrekt tjocklek. Tjockleksmätningar utgör en viktig del av utvärderingen av förluster  i elektrisk utrustning. Föroreningar och smutsiga bandytor i kallvalsningssteget kan öka kolhalten i band som passerar genom ugnar efter kallvalsning. Valsämnet bör rengöras innan avhaspling och upprullning. När bandet passerar genom glödgningsugnar bör temperaturen vara homogen över hela remsan. Enligt simuleringar av ugnen och remsans temperatur kan homogen temperatur uppnås med elektriska värmeelement (Molybden disilikat, MoSi2) insatta i reflektorer. De kan ersätta den gaseldade brännare som för närvarande används. Modellering av kallvalsningsprocessen sker i syfte att hitta korrelation mellan styrsystemparametrar. En multivariabel matematisk modell för valsningsprocessen har tagits fram som använder korrelation mellan variabler. Denna metod ger numeriskt effektiva algoritmer som behövs för att köra i en realtids-miljö. En modell har tagits fram för att bestämma remsornas med tjocklek för kontinuerlig och icke-kontinuerligt tillstånd med hjälp av en robust algoritm. Det kritiska problemet i reglerloopen för tjocklek har analyserats, och en adaptiv regleralgoritm föreslås. Ett antal metoder har undersökts för att förbättra de slutliga bandegenskaperna. Avvikelser i kallvalsade band med avseende på tjocklek, excentriciteter och form kompenseras. Simuleringsresultaten har verifierats med mätdata och de viktigaste källorna till störningar upptäckts.   Slutligen, för att lösa problemet med heta punkter i stora transformatorer föreslås en ny metod för oljesprutning, vilken också analyseras i avhandlingen.

In order to design a power transformer it is important to understand its internal electromagnetic behaviour. That can be obtained by measurements on physical transformers, analytical expressions and computer simulations. One benefit with simulations is that the transformer can be studied before it is built physically and that the consequences of changing dimensions and parameters easily can be assessed. In this thesis a time-domain transformer model is presented. The model includes core phenomena as magnetic static hysteresis, eddy current and excess losses. Moreover, the model comprises winding phenomena as eddy currents, capacitive effects and leakage flux. The core and windings are first modelled separately and then connected together in a composite transformer model. This results in a detailed transformer model. One important result of the thesis is the feasibility to simulate dynamic magnetization including the inhomogeneous field distribution due to eddy currents in the magnetic core material. This is achieved by using a Cauer circuit combined with models for static and dynamic magnetization. Thereby, all magnetic loss components in the material can be simulated accurately. This composite dynamic magnetization model is verified through experiments showing very good correspondence with measurements. Furthermore, the composite transformer model is verified through measurements. The model is shown to yield good correspondence with measurements in normal operation and non-normal operations like no-load, inrush current and DC-magnetization. / QC20100708

Current trends in electric power consumption indicate an increasing use of dc in end-user equipment, such as computers and other electronic appliances used in households and offices. With a dc power system, ac/dc conversion within these loads can be avoided, and losses reduced. AC/DC conversion is instead centralized, and by using efficient, fully controllable power-electronic interfaces, high power quality for both ac and dc systems during steady state and ac grid disturbances can be obtained. Connection of back-up energy storage and small-size generation is also easier to realize in a dc power system. To facilitate practical application, it is important that the shift from ac to dc can be implemented with minimal changes. Results from measurements carried out on common household appliances show that most loads are able to operate with dc supply without any modifications. Furthermore, simple, and yet sufficiently accurate, load models have been derived using the measurement results. The models have been used for further analysis of the dc system, both in steady state and during transients. AC microgrids have gained research interest during the last years. A microgrid is a part of power systems which can operate both connected to the ac grid, and autonomously in island mode when the loads are supplied from locally distributed resources. A low-voltage dc microgrid can be used to supply sensitive electronic loads, since it combines the advantages of using a dc supply for electronic loads, and using local generation to supply sensitive loads. An example of a commercial power system which can benefit from using a dc microgrid is data center. The lower losses due to fewer power conversion steps results in less heat which need to be cooled, and therefore the operation costs are lowered. To ensure reliable operation of a low-voltage dc microgrid, well-designed control and protection systems are needed. An adaptive controller is required to coordinate the different resources based on the load-generation balance in the microgrid, and status of the ac grid. The performance of the developed controller has been studied and evaluated through simulations. The results show that it is possible to extend use of the data center dc microgrid to also support a limited amount of ac loads close to the data center, for example an office building. A protection-system design for low-voltage dc microgrids has been proposed, and different protection devices and grounding methods have been presented. Moreover, different fault types and their impact on the system have been analyzed. The type of protection that can be used depends on the sensitivity of the components in the microgrid. Detection methods for different components have been suggested in order to achieve a fast and accurate fault clearing. An experimental small-scale dc power system has been used to supply different loads, both during normal and fault conditions. A three-phase two-level voltage source converter in series with a Buck converter was used to interconnect the ac and the dc power systems. Together the converters have large controllability, high power quality performance, and allow bi-directional power flow. This topology can preferably be used together with energy storage. The tests confirm the feasibility of using a dc power system to supply sensitive electronic loads. / QC 20100908

The main ambition of this degree project is to illustrate the fundamental problems of today’s electric tariff regulation and the usage of the analyzing tool; The Network Tariff Model. There is a further discussion of potential problems and clear improvements of the 2012 years proposed network tariff regulation. Interviews have been conducted with specific network companies and Energimarknadsinspektionen. The proposed regulation of 2012 is discussed from the government’s proposition. This paper clearly shows that the authority´s work has been conducted in a very unprofessional manner during the period of The Network Tariff Model. Transparency has been missing at the same time when quality control has been almost nonexistent from the authority. The regulation itself and the usage of The Network Tariff Model generated substantial criticism. Disagreement about the model was mostly about the use of methods and parameter settings. The new regulation of beforehand assessment of network tariffs is scheduled to be commissioned during 2012. This regulation has certain advantages compared to today’s for once because it counts for the actual costs for the corporations. At the same time this particular approach will demand a lot of resources of the authority. When the regulating models of the future are being developed legitimacy to all parties must be ensured. The regulations must at the same time be adjusted to the resources available for the grid authority. Likewise the process and nature of putting forward new regulations should be based on continuity to greater extent.

Magnetgärdets transformatorstation är belägen i Ludvika och ägs av Västerbergslagens Energi AB. Transformatorstationen är nyligen ombyggd och nu mer placerad inomhus, vilket gör att påkänningar från väder och vind minskar. För att minimera behovet av personlig tillsyn och öka tillgängligheten behövs dock någon form av tillståndsövervakning. Syftet med examensarbetet har varit att undersöka om det med hjälp av värmekameror är möjligt att tillståndsövervaka de kritiska punkterna i transformatorstationen. För att fastställa detta har teori kring tillståndsövervakning, termografering och värmekameror sammanställts tillsammans med utförda mätningar och tester. Resultaten har sedan diskuterats för att se om ett möjligt lösningsförslag kan presenteras. Viktiga kriterier för att möjligöra tillståndsövervakning med hjälp av värmekameror har tagits fram. Slutsatsen är att det är möjligt, men kräver en komplicerad systemlösning. Lösningsförslaget bygger på flera samspelande delar och bör bli ett kraftfullt övervakningssystem. Huruvida värmekameror är det bästa och enda verktyget är dock tveksamt. Det anses därför väsentligt att även undersöka andra övervakningsmöligheter, som exempel termistorgivare. / The substation called Magnetgärdet is located in Ludvika, Sweden and it is owned by Västerbergslagens Energi AB. The substation has recently been renovated and is now placed indoors, which reduces the influence of weather on the station. To decrease the need for personal supervision and increase the availability of the station a monitoring solution is needed. The purpose of this degree thesis is to examine if it is possible to monitor the condition of critical items in the station with infrared cameras. To determine this, theory on condition monitoring, thermography and thermal imaging cameras has been compiled together with relevant measurements and tests. The results are then discussed to see if a possible solution can be presented. Important criteria for making condition monitoring with infrared cameras possible have also been formulated in this degree thesis. The conclusion is that it is possible, but a complicated system is required. The solution we have given is based on different parts interplaying with each other and it should become a powerful monitoring system. It is however uncertain whether infrared cameras are the only and best tools, therefore other tools should be considered. It might be possible to use thermistors with, or instead of infrared cameras.

Rapporten utreder om distributionstransformatorer med märkeffekten 50 kVA i Vattenfall Eldistribution AB:s elnät kan avskaffas till förmån för märkeffekten 100 kVA. Transformatorer med märkeffekten 50 kVA förekommer vid nedtransformering av spänningen från 22 kV och 11 kV till hushållens huvudspänning 0,4 kV. 50 kVA-transformatorer skiljer inte särskilt mycket från transformatorer med den högre märkeffekten i fråga om storlek och pris, och de bedöms kunna bytas ut utan större praktiska svårigheter. Fördelen med 100 kVA är att de elektriska belastningsförlusterna blir lägre i och med den högre märkeffekten. Dessutom innebär ett byte vissa elkvalitetsförbättringar. Nackdelarna med 100 kVA är att de elektriska tomgångsförlusterna är högre och att inköpspriset är högre än för 50 kVA. I övrigt kan kostnaderna likställas för de två alternativen. Endast kostnader för aktiva effektförluster berördes i rapporten då de ekonomiska kostnaderna för reaktiva effektförluster kunde försummas för de aktuella transformatorerna. För att nå ett svar på frågan om det kan vara lönsamt att avskaffa 50 kVA-transformatorerna studerades fem verkliga fall i Vattenfalls svenska elnät. Dessutom studerades eventuella elkvalitetsvinster med ett byte. Svaret blev att inte för något av de fem studerade fallen var det lönsamt med ett byte till 100 kVA-transformator. Rörande elkvalitetsaspekten blev svaret att ett byte visserligen innebär en skillnad men att andra faktorer oftast har större betydelse. Rapportens rekommendation blev att behålla 50 kVA-transformatorn i distributionsnätet.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made. By including photovoltaic inthe local plan it is possible to give a region large areas with orientation toward south,increasing the solar energy potential with up to 50 % which also increase themotivation for implementing photovoltaic in the project. These are essential for asignificant increase of photovoltaic in city development.