The role of competition in tree communities is increasingly well understood, while little is known about the patterns and mechanisms of the interplay between above- and belowground competition in tree communities. This knowledge, however, is crucial for a better understanding of community dynamics and developing adaptive near-natural management strategies. We assessed neighbourhood interactions in an unmanaged old-growth European beech (Fagus sylvatica) forest by quantifying variation in the intensity of above- (shading) and belowground competition (crowding) among dominant and co-dominant canopy beech trees during tree maturation. Shading had on average a much larger impact on radial growth than crowding and the sensitivity to changes in competitive conditions was lowest for crowding effects. We found that each mode of competition reduced the effect of the other. Increasing crowding reduced the negative effect of shading, and at high levels of shading, crowding actually had a facilitative effect and increased growth. Our study demonstrates that complementarity in above- and belowground processes enable F. sylvatica to alter resource acquisition strategies, thus optimising tree radial growth. As a result, competition seemed to become less important in stands with a high growing stock and tree communities with a long continuity of anthropogenic undisturbed population dynamics. We suggest that growth rates do not exclusively depend on the density of potential competitors at the intraspecific level, but on the conspecific aggregation of large-diameter trees and their functional role for regulating biotic filtering processes. This finding highlights the potential importance of the rarely examined relationship between the spatial aggregation pattern of large-diameter trees and the outcome of neighbourhood interactions, which may be central to community dynamics and the related forest ecosystem services.

The role of competition in tree communities is increasingly well understood, while little is known about the patterns and mechanisms of the interplay between above- and belowground competition in tree communities. This knowledge, however, is crucial for a better understanding of community dynamics and developing adaptive near-natural management strategies. We assessed neighbourhood interactions in an unmanaged old-growth European beech (Fagus sylvatica) forest by quantifying variation in the intensity of above- (shading) and belowground competition (crowding) among dominant and co-dominant canopy beech trees during tree maturation. Shading had on average a much larger impact on radial growth than crowding and the sensitivity to changes in competitive conditions was lowest for crowding effects. We found that each mode of competition reduced the effect of the other. Increasing crowding reduced the negative effect of shading, and at high levels of shading, crowding actually had a facilitative effect and increased growth. Our study demonstrates that complementarity in above- and belowground processes enable F. sylvatica to alter resource acquisition strategies, thus optimising tree radial growth. As a result, competition seemed to become less important in stands with a high growing stock and tree communities with a long continuity of anthropogenic undisturbed population dynamics. We suggest that growth rates do not exclusively depend on the density of potential competitors at the intraspecific level, but on the conspecific aggregation of large-diameter trees and their functional role for regulating biotic filtering processes. This finding highlights the potential importance of the rarely examined relationship between the spatial aggregation pattern of large-diameter trees and the outcome of neighbourhood interactions, which may be central to community dynamics and the related forest ecosystem services.

Individual differences in the strength of music preference are among the most intricate psychological phenomena. While one person gets by very well without music, another person needs to listen to music every day and spends a lot of temporal and financial resources on listening to music, attending concerts, or buying concert tickets. Where do these differences come from? The hypothesis presented in this article is that the strength of music preference is mainly informed by the functions that music fulfills in people’s lives (e.g., to regulate emotions, moods, or physiological arousal; to promote self-awareness; to foster social relatedness). Data were collected with a diary study, in which 121 respondents documented the goals they tried to attain and the effects that actually occurred for up to 5 music-listening episodes per day for 10 successive days. As expected, listeners reporting more intense experience of the functional use of music in the past (1) had a stronger intention to listen to music to attain specific goals in specific situations and (2) showed a larger overall strength of music preference. It is concluded that the functional effectiveness of music listening should be incorporated in existing models and frameworks of music preference to produce better predictions of interindividual differences in the strength of music preference. The predictability of musical style/genre preferences is also discussed with regard to the present results.

Following Snyderman and Rothman (1987, 1988), we surveyed expert opinions on the current state of intelligence research. This report examines expert opinions on causes of international differences in student assessment and psychometric IQ test results. Experts were surveyed about the importance of culture, genes, education (quantity and quality), wealth, health, geography, climate, politics, modernization, sampling error, test knowledge, discrimination, test bias, and migration. The importance of these factors was evaluated for diverse countries, regions, and groups including Finland, East Asia, sub-Saharan Africa, Southern Europe, the Arabian-Muslim world, Latin America, Israel, Jews in the West, Roma (gypsies), and Muslim immigrants. Education was rated by N = 71 experts as the most important cause of international ability differences. Genes were rated as the second most relevant factor but also had the highest variability in ratings. Culture, health, wealth, modernization, and politics were the next most important factors, whereas other factors such as geography, climate, test bias, and sampling error were less important. The paper concludes with a discussion of limitations of the survey (e.g., response rates and validity of expert opinions).

Background Anticipatory and compensatory balance responses are used by the central nervous system (CNS) to preserve balance, hence they significantly contribute to the understanding of physiological mechanisms of postural control. It is well established that various sensory systems contribute to the regulation of balance. However, it is still unclear which role each individual sensory system (e.g. plantar mechanoreceptors) plays in balance regulation. This becomes also evident in various patient populations, for instance in diabetics with reduced plantar sensitivity. To investigate these sensory mechanisms, approaches like hypothermia to deliberately reduce plantar afferent input have been applied. But there are some limitations regarding hypothermic procedures in previous studies: Not only plantar aspects of the feet might be affected and maintaining the hypothermic effect during data collection. Therefore, the aim of the present study was to induce a permanent and controlled plantar hypothermia and to examine its effects on anticipatory and compensatory balance responses. We hypothesized deteriorations in anticipatory and compensatory balance responses as increased center of pressure excursions (COP) and electromyographic activity (EMG) in response to the hypothermic plantar procedure. 52 healthy and young subjects (23.6 ± 3.0 years) performed balance tests (unexpected perturbations). Subjects’ foot soles were exposed to three temperatures while standing upright: 25, 12 and 0 °C. COP and EMG were analyzed during two intervals of anticipatory and one interval of compensatory balance responses (intervals 0, 1 and 2, respectively). Results Similar plantar temperatures confirmed the successful implementation of the thermal platform. No significant COP and EMG differences were found for the anticipatory responses (intervals 0 and 1) under the hyperthermia procedure. Parameters in interval 2 showed generally decreased values in response to cooling. Conclusion No changes in anticipatory responses were found possibly due to sensory compensation processes of other intact afferents. Decreased compensatory responses may be interpreted as the additional balance threat, creating a more cautious behavior causing the CNS to generate a kind of over-compensatory behavior. Contrary to the expectations, there were different anticipatory and compensatory responses after reduced plantar inputs, thereby, revealing alterations in the organization of CNS inputs and outputs according to different task difficulties.

This paper reports the development of an Alkali Activated Binder (AAB) with an emphasis on the performance and the durability of the AAB-matrix. For the development of the matrix, the reactive components granulated slag and coal fly ash were used, which were alkali activated with a mixture of sodium hydroxide (2 - 10 mol/l) and aqueous sodium silicate solution (SiO2/Na2O molar ratio: 2.1) at ambient temperature. A sodium hydroxide concentration of 5.5 mol/l revealed the best compromise between setting time and mechanical strengths of the AAB. With this sodium hydroxide concentration, the compressive and the 3-point bending tensile strength of the hardened AAB were 53.4 and 5.5 MPa respectively after 14 days. As a result of the investigation of the acid resistance, the AAB-matrix showed a very high acid resistance in comparison to ordinary Portland cement concrete. In addition, the AAB had a high frost resistance, which had been validated by the capillary suction, internal damage and freeze thaw test with a relative dynamic E-Modulus of 93% and a total amount of scaled material of 30 g/m2 after 28 freeze-thaw cycles (exposure class: XF3).

Physical activity is positively related to cognitive functioning and brain volume in older adults. Interestingly, different types of physical activity vary in their effects on cognition and on the brain. For example, dancing has become an interesting topic in aging research, as it is a popular leisure activity among older adults, involving cardiovascular and motor fitness dimensions that can be positively related to cognition. However, studies on brain structure are missing. In this study, we tested the association of long-term senior dance experience with cognitive performance and gray matter brain volume in older women aged 65 to 82 years. We compared nonprofessional senior dancers (n=28) with nonsedentary control group participants without any dancing experience (n=29), who were similar in age, education, IQ score, lifestyle and health factors, and fitness level. Differences neither in the four tested cognitive domains (executive control, perceptual speed, episodic memory, and long-term memory) nor in brain volume (VBM whole-brain analysis, region-of-interest analysis of the hippocampus) were observed. Results indicate that moderate dancing activity (1-2 times per week, on average) has no additional effects on gray matter volume and cognitive functioning when a certain lifestyle or physical activity and fitness level are reached.

A multitude of sensory inputs needs to be processed during sensorimotor integration. A crucial factor for detecting relevant information is its complexity, since information content can be conflicting at a perceptual level. This may be central to executive control processes, such as response inhibition. This EEG study aims to investigate the system neurophysiological mechanisms behind effects of perceptual conflict on response inhibition. We systematically modulated perceptual conflict by integrating a Global-local task with a Go/Nogo paradigm. The results show that conflicting perceptual information, in comparison to non-conflicting perceptual information, impairs response inhibition performance. This effect was evident regardless of whether the relevant information for response inhibition is displayed on the global, or local perceptual level. The neurophysiological data suggests that early perceptual/ attentional processing stages do not underlie these modulations. Rather, processes at the response selection level (P3), play a role in changed response inhibition performance. This conflict-related impairment of inhibitory processes is associated with activation differences in (inferior) parietal areas (BA7 and BA40) and not as commonly found in the medial prefrontal areas. This suggests that various functional neuroanatomical structures may mediate response inhibition and that the functional neuroanatomical structures involved depend on the complexity of sensory integration processes.

The production of paperboard packaging components in fast-running machines requires reliability of the production process. Boundaries for the process parameters and constraints for the geometry of the tools require investigation to determine dependable configurations. This paper aimed to investigate the relationships between process parameters, tool geometry, and the occurrence of rupture in the deep-drawing process of paperboard. Different types of ruptures in various phases of the process were distinguished and linked to their specific cause. An extensive experimental investigation with multiple variables of influence was conducted. A logistic regression model was used to describe the experimental data and was statistically validated. The blankholder force was found to be the most influential parameter. Interactions between the parameters blankholder force, punch velocity, and punch diameter were recognized. A high punch velocity can reduce the probability of rupture when the punch diameter is adjusted.

The production of paperboard packaging components in fast-running machines requires reliability of the production process. Boundaries for the process parameters and constraints for the geometry of the tools require investigation to determine dependable configurations. This paper aimed to investigate the relationships between process parameters, tool geometry, and the occurrence of rupture in the deep-drawing process of paperboard. Different types of ruptures in various phases of the process were distinguished and linked to their specific cause. An extensive experimental investigation with multiple variables of influence was conducted. A logistic regression model was used to describe the experimental data and was statistically validated. The blankholder force was found to be the most influential parameter. Interactions between the parameters blankholder force, punch velocity, and punch diameter were recognized. A high punch velocity can reduce the probability of rupture when the punch diameter is adjusted.