Spelling suggestions: "subject:"rotating magnetic field"" "subject:"notating magnetic field""
1 |
Analysis and Control of a Single-side Permanentmagnet Axial-flux Motor with Aluminum Stator CoreWong, Wun-Siane 10 September 2007 (has links)
This thesis presents a systematic scheme to design the propulsive force and axial force control of a single-sided permanent-magnet axial-flux motor with aluminum stator core (SPAMA) through the detailed mathematical model and operational analysis. According to the rotating magnetic field theory combining with the recoil line characteristics of permanent magnet and the magnetic equivalent circuit, appropriate projection of the stator currents to achieve the propulsive force and axial force control can be realized. From these evaluations, a feasible operational guidance for SPAMA field oriented control (FOC) framework can be successfully developed. Finally, based on our system model and simulation results, the steady-stay characteristics of the machine can be observed.
|
2 |
Instabilities in a Crystal Growth Melt Subjected to Alternating Magnetic FieldsDavis, Kenny 16 September 2013 (has links)
In confined bulk crystal growth techniques such as the traveling heater method, base materials in an ampoule are melted and resolidified as a single crystal. During this process, flow control is desired so that the resulting alloy semiconductors are uniform in composition and have minimal defects. Such control allows for tuned lattice parameters and bandgap energy, properties necessary to produce custom materials for specific electro-optical applications. For ternary alloys, bulk crystal growth methods suffer from slow diffusion rates between elements, severely limiting growth rates and reducing uniformity. Exposing the electrically conducting melt to an external alternating magnetic field can accelerate the mixing. A rotating magnetic field (RMF) can be used to stir the melt in the azimuthal direction, which reduces temperature variations and controls the shape at the solidification front. A traveling magnetic field (TMF) imposes large body forces in the radial and axial directions, which helps reduce the settling of denser components and return them to the growth front. In either case, mixing is desired, but turbulence is not. At large magnetic Taylor numbers the flow becomes unstable to first laminar and then turbulent transitions. It is imperative that crystal growers know when these transitions will occur and how the flow physics is affected. Here, the melt driven by electromagnetic forces is analyzed through the use of 3D numerical simulations of the flow field up to and beyond the point of laminar instability. The analysis aims to emulate laboratory conditions for generating electromagnetic forces for both types of alternating magnetic fields and highlights the differences between laboratory forces and the analytical approximations that are often assumed. Comparisons are made between
the resulting forces, flow fields, and points of instability as the frequency of the alternating field varies. Critical Taylor numbers and the resulting unstable flow fields are compared to the results from linear stability theory.
|
3 |
Ruído magnético de Barkhausen contínuo rotacional. / Continuous rotational magnetic Barkhausen noise.Caldas Morgan, Manuel Alfredo 10 May 2013 (has links)
Este trabalho apresenta os avanços no desenvolvimento de um novo método de ensaio não-destrutivo magnético. O método está baseado na técnica do Ruído Magnético de Barkhausen (RMB), particularmente em uma variante denominada Barkhausen Contínuo. O RMB é gerado devido à ação de um campo magnético variável magnetizante que produz mudanças abruptas e irreversíveis na estrutura magnética do material. Essas mudanças são influenciadas pela microestrutura e a distribuição de tensões dentro do mesmo. As medições podem ser usadas para construir uma distribuição bidimensional do RMB ao redor de um ponto fixo, cujo resultado irá refletir o nível de anisotropia magnética, usualmente indicando um eixo de fácil magnetização, parâmetro relevante dado que o comportamento da grande maioria de materiais ferromagnéticos de engenharia é usualmente anisotrópico. As mudanças no eixo de fácil magnetização podem indicar a presença de anomalias mecânicas ou abnormalidades no processo de fabricação e no caso da aplicação de uma tensão externa, podem refletir a magnitude e a direção da mesma. O presente trabalho descreve uma metodologia que faz uso de um campo magnético rotacional para obter sinais RMB relacionados ao angulo de giro, possibilitando a identificação da direção do eixo de fácil magnetização, ultrapassando as capacidades oferecidas pela técnica RMB convencional mediante o fornecimento de informação em tempo real, que permite a obtenção de um conjunto de parâmetros que quantificam a anisotropia magnética de uma amostra. A técnica foi usada para a detecção do eixo de fácil magnetização e o nível de anisotropia magnética em materiais diferentes devida aos efeitos do processo de fabricação. Posteriormente foi demonstrado que a técnica é capaz de monitorar a evolução da tensão uniaxial aplicada, obtendo curvas de calibração, sensíveis ao sentido de aplicação da tensão. Para o caso pouco estudado de amostras submetidas a tensões biaxiais, o uso da técnica do Barkhausen contínuo rotacional fez possível de verificar que as características morfológicas das medições de anisotropia magnética obtidas, guardam relação com a direção das tensões principais. Foi realizada uma avaliação do método aplicado para a medição dinâmica de anisotropia magnética em juntas soldadas, indicando estados de tensão e características microestruturais coerentes com as esperadas. O método tem a possibilidade de ser implementado para medições anisotropia magnética em alta resolução/alta velocidade. / This works presents the current advances on the development of a new method of magnetic non-destructive testing. The method is based on the magnetic Barkhausen noise (MBN), more specifically in one branch known as Continuous Barkhausen. MBN is produced due to the effect of a variable magnetic field, which causes abrupt and irreversible changes to the magnetic structure of the material. These changes are influenced by the microstructure of the material and the stress distributions within. Measurements can be used to construct a bi dimensional MBN distribution around a fixed point, which in turn will be a reflect of its magnetic anisotropy level, usually characterized by an easy axis of magnetization, an important parameter given that more often than not, the behavior of most engineering ferromagnetic materials is anisotropic. Variations of the easy axis could be the indication of mechanical anomalies or abnormalities that appear as a result of the fabrication process. If there is an external stress applied to the sample, it can provide information about its magnitude and direction. The present work describes a methodology which uses a precise rotating magnetic field in order to obtain MBN signals related to a given magnetization angle, making possible the finding of the easy axis, exceeding the limits of conventional MBN measurements by providing real time data which in turn will allow to infer a set of parameters that quantify the magnetic anisotropy of the sample. The proposed technique was successfully used to find both the easy axis and a quantitative level of magnetic anisotropy between different materials, consequence of the fabrication process. Subsequently, it was shown that the technique was able to perform a monitoring of the evolution of both uniaxial and biaxial applied stress, obtaining linear relationships (uniaxial case), sensitive to the direction of loading. In not so much studied case of biaxial loading, the use of the continuous rotational Barkhausen method made possible to observe that the morphologic characteristics of the magnetic anisotropy measurements bear a close resemblance to the direction of the principal stress field. An evaluation of the technique as a tool for the dynamic measurement of magnetic anisotropy on welded joints, indicating stress states and microstructural features coherent with the ones expected in this scenario. The method has the possibility of being implemented as a technique for high speed/high resolution measurements of magnetic anisotropy.
|
4 |
Effet thermoélectrique dans les métaux liquides sous champ magnétique. / Thermoelectric current and magnetic field interaction Influence on the structure of binary metallic alloysKaldre, Imants 12 July 2013 (has links)
Lorsqu'un champ magnétique est appliqué au cours de la solidification directionnelle, une convection dans la phase liquide peut être induite par l'effet thermoélectrique. En effet la présence d'un gradient de température le long du front de solidification peut provoquer la circulation du courant thermoélectrique, qui interagit avec le champ magnétique appliqué pour créer un écoulement (convection thermo électromagnétique-TEMC). Les conditions de transport de soluté et de l'énergie sont affectées par cette convection, donc il y a influence sur l'espacement des dendrites et la macro-ségrégation des composants de l'alliage. Dans ce travail, l'influence du champ magnétique sur la solidification directionnelle d'alliages métalliques est étudiée. Des travaux expérimentaux de la solidification directionnelle de Sn-Pb et Sn-Bi alliages sont réalisés. La solidification directionnelle dans la configuration Bridgman est effectuée avec ou sans champ magnétique appliqué. L'influence, sur la solidification, du champ magnétique et d'un courant électrique (AC et DC) appliqués est étudiée. Les mouvements du liquide provoquent de fortes macro-ségrégations ainsi qu'un modification des espacements interdendritiques. Les résultats expérimentaux sont interprétés à la lumière d'une modélisation heuristique. Le cas d'un champ magnétique tournant a été aussi étudié. Ainsi, la valeur de la rotation du champ est choisie pour ralentir assez brassage électromagnétique sans pour autant supprimer les effets de TEMC. À faible vitesse de tirage et faible vitesse de rotation faible champ une macro-ségrégation en forme de spirale a pu être obtenue. / If magnetic field is applied during directional solidification, liquid phase convection can be induced by means of thermoelectromagnetic effect. Temperature gradient at the solidification front can cause thermoelectric current circulation, which then interacts with field and creates convection (Thermoelectromagnetic convection-TEMC). Solute and energy transport conditions are affected by this convection, thus it influences dendrite spacing and macrosegregation of the alloys. In this work magnetic field influence on the directional solidification of metallic alloys is studied. Experimental work of directional solidification of Sn-Pb and Sn-Bi alloys is done. Alloys are directionally solidified in Bridgman setup without or with applied magnetic field. Influence on the structure by magnetic field and applied electric current (AC and DC) is studied in this work. Analytical and experimental results are compared and interpreted. Bridgman solidification under rotating transverse magnetic field is studied as well, field rotation value is chosen to be slow enough that electromagnetic stirring does not fully suppress effects of TEMC. At low pulling velocity and low field rotation velocity spiral shaped component macrosegregation can be achieved.
|
5 |
Ruído magnético de Barkhausen contínuo rotacional. / Continuous rotational magnetic Barkhausen noise.Manuel Alfredo Caldas Morgan 10 May 2013 (has links)
Este trabalho apresenta os avanços no desenvolvimento de um novo método de ensaio não-destrutivo magnético. O método está baseado na técnica do Ruído Magnético de Barkhausen (RMB), particularmente em uma variante denominada Barkhausen Contínuo. O RMB é gerado devido à ação de um campo magnético variável magnetizante que produz mudanças abruptas e irreversíveis na estrutura magnética do material. Essas mudanças são influenciadas pela microestrutura e a distribuição de tensões dentro do mesmo. As medições podem ser usadas para construir uma distribuição bidimensional do RMB ao redor de um ponto fixo, cujo resultado irá refletir o nível de anisotropia magnética, usualmente indicando um eixo de fácil magnetização, parâmetro relevante dado que o comportamento da grande maioria de materiais ferromagnéticos de engenharia é usualmente anisotrópico. As mudanças no eixo de fácil magnetização podem indicar a presença de anomalias mecânicas ou abnormalidades no processo de fabricação e no caso da aplicação de uma tensão externa, podem refletir a magnitude e a direção da mesma. O presente trabalho descreve uma metodologia que faz uso de um campo magnético rotacional para obter sinais RMB relacionados ao angulo de giro, possibilitando a identificação da direção do eixo de fácil magnetização, ultrapassando as capacidades oferecidas pela técnica RMB convencional mediante o fornecimento de informação em tempo real, que permite a obtenção de um conjunto de parâmetros que quantificam a anisotropia magnética de uma amostra. A técnica foi usada para a detecção do eixo de fácil magnetização e o nível de anisotropia magnética em materiais diferentes devida aos efeitos do processo de fabricação. Posteriormente foi demonstrado que a técnica é capaz de monitorar a evolução da tensão uniaxial aplicada, obtendo curvas de calibração, sensíveis ao sentido de aplicação da tensão. Para o caso pouco estudado de amostras submetidas a tensões biaxiais, o uso da técnica do Barkhausen contínuo rotacional fez possível de verificar que as características morfológicas das medições de anisotropia magnética obtidas, guardam relação com a direção das tensões principais. Foi realizada uma avaliação do método aplicado para a medição dinâmica de anisotropia magnética em juntas soldadas, indicando estados de tensão e características microestruturais coerentes com as esperadas. O método tem a possibilidade de ser implementado para medições anisotropia magnética em alta resolução/alta velocidade. / This works presents the current advances on the development of a new method of magnetic non-destructive testing. The method is based on the magnetic Barkhausen noise (MBN), more specifically in one branch known as Continuous Barkhausen. MBN is produced due to the effect of a variable magnetic field, which causes abrupt and irreversible changes to the magnetic structure of the material. These changes are influenced by the microstructure of the material and the stress distributions within. Measurements can be used to construct a bi dimensional MBN distribution around a fixed point, which in turn will be a reflect of its magnetic anisotropy level, usually characterized by an easy axis of magnetization, an important parameter given that more often than not, the behavior of most engineering ferromagnetic materials is anisotropic. Variations of the easy axis could be the indication of mechanical anomalies or abnormalities that appear as a result of the fabrication process. If there is an external stress applied to the sample, it can provide information about its magnitude and direction. The present work describes a methodology which uses a precise rotating magnetic field in order to obtain MBN signals related to a given magnetization angle, making possible the finding of the easy axis, exceeding the limits of conventional MBN measurements by providing real time data which in turn will allow to infer a set of parameters that quantify the magnetic anisotropy of the sample. The proposed technique was successfully used to find both the easy axis and a quantitative level of magnetic anisotropy between different materials, consequence of the fabrication process. Subsequently, it was shown that the technique was able to perform a monitoring of the evolution of both uniaxial and biaxial applied stress, obtaining linear relationships (uniaxial case), sensitive to the direction of loading. In not so much studied case of biaxial loading, the use of the continuous rotational Barkhausen method made possible to observe that the morphologic characteristics of the magnetic anisotropy measurements bear a close resemblance to the direction of the principal stress field. An evaluation of the technique as a tool for the dynamic measurement of magnetic anisotropy on welded joints, indicating stress states and microstructural features coherent with the ones expected in this scenario. The method has the possibility of being implemented as a technique for high speed/high resolution measurements of magnetic anisotropy.
|
6 |
Novel efficiency evaluation methods and analysis for three-phase induction machinesMcKinnon, Douglas John, Electrical Engineering & Telecommunications, Faculty of Engineering, UNSW January 2005 (has links)
This thesis describes new methods of evaluating the efficiency of three-phase induction machines using synthetic loading. Synthetic loading causes the induction machine to draw full-load current without the need to connect a mechanical load to the machine's drive shaft. The synthetic loading methods cause the machine to periodically accelerate and decelerate, producing an alternating motor-generator action. This action causes the machine, on average over each synthetic loading cycle, to operate at rated rms current, rated rms voltage and full-load speed, thereby producing rated copper losses, iron loss and friction and windage loss. The excitation voltages are supplied from a PWM inverter with a large capacity DC bus capable of supplying rated rms voltage. The synthetic loading methods of efficiency evaluation are verified in terms of the individual losses in the machine by using a new dynamic model that accounts for iron loss and all parameter variations. The losses are compared with the steady-state loss distribution determined using very accurate induction machine parameters. The parameters were identified using a run-up-to-speed test at rated voltage and the locked rotor and synchronous speed tests conducted with a variable voltage supply. The latter tests were used to synthesise the variations in stator leakage reactance, magnetising reactance and the equivalent iron loss resistance over the induction machine's speed range. The run-up-to-speed test was used to determine the rotor resistance and leakage reactance variations over the same speed range. The test method results showed for the first time that the rotor leakage reactance varied in the same manner as the stator leakage and magnetising reactances with respect to current. When all parameter variations are taken into account there is good agreement between theoretical and measured results for the synthetic loading methods. The synthetic loading methods are applied to three-phase induction machines with both single- and double-cage rotors to assess the effect of rotor parameter variations in the method. Various excitation waveforms for each method were used and the measured and modelled efficiencies compared to conventional efficiency test results. The results verify that it is possible to accurately evaluate the efficiency of three-phase induction machines using synthetic loading.
|
7 |
Zlepšení energetických parametrů asynchronních strojů malého výkonu / Improvement Power Parameter of Small Induction MotorsHalfar, Tomáš January 2013 (has links)
The master’s thesis Improvement power parameter of small induction motors deals with issues of lowering the losses of small induction motors. The first part introduces with design and principles of operation of induction motors. Also introduces to theoretical problematic of losses, their lowering and measuring. In the practical part there are results of the measuring the losses in the induction motor ATAS Elektromotory Náchod a.s. T22VT512 (71-0512). There are proposed methods of increasing the efficiency of induction motor due to measuring and their verification in the Maxwell software. The last part is dedicated to measuring the losses of prototype motor from ATAS and comparison of results with previous motor.
|
8 |
Methodenentwicklung zur Simulation von Strömungen mit freier Oberfläche unter dem Einfluss elektromagnetischer WechselfelderBeckstein, Pascal 16 February 2018 (has links) (PDF)
Im Bereich der industriellen Metallurgie und Kristallzüchtung treten bei zahlreichen Anwendungen, wo magnetische Wechselfelder zur induktiven Beeinflussung von leitfähigen Werkstoffen eingesetzt werden, auch Strömungen mit freier Oberfläche auf. Das Anwendungsspektrum reicht dabei vom einfachen Aufschmelzen eines Metalls in einem offenen Tiegel bis hin zur vollständigen Levitation. Auch der sogenannte RGS-Prozess, ein substratbasiertes Kristallisationsverfahren zur Herstellung siliziumbasierter Dünnschichtmaterialien, ist dafür ein Beispiel. Um bei solchen Prozessen die Interaktion von Magnetfeld und Strömung zu untersuchen, ist die numerische Simulationen ein wertvolles Hilfsmittel. Für beliebige dreidimensionale Probleme werden entsprechende Berechnungen bisher durch eine externe Kopplung kommerzieller Programme realisiert, die für Magnetfeld und Strömung jeweils unterschiedliche numerische Techniken nutzen. Diese Vorgehensweise ist jedoch im Allgemeinen mit unnötigem Rechenaufwand verbunden. In dieser Arbeit wird ein neu entwickelter Methodenapparat auf Basis der FVM vorgestellt, mit welchem sich diese Art von Berechnungen effizient durchführen lassen. Mit der Implementierung dieser Methoden in foam-extend, einer erweiterten Version der quelloffenen Software OpenFOAM, ist daraus ein leistungsfähiges Werkzeug in Form einer freien Simulationsplattform entstanden, welches sich durch einen modularen Aufbau leicht erweitern lässt. Mit dieser Plattform wurden in foam-extend auch erstmalig dreidimensionale Induktionsprozesse im Frequenzraum gelöst.
|
9 |
Methodenentwicklung zur Simulation von Strömungen mit freier Oberfläche unter dem Einfluss elektromagnetischer WechselfelderBeckstein, Pascal 08 January 2018 (has links)
Im Bereich der industriellen Metallurgie und Kristallzüchtung treten bei zahlreichen Anwendungen, wo magnetische Wechselfelder zur induktiven Beeinflussung von leitfähigen Werkstoffen eingesetzt werden, auch Strömungen mit freier Oberfläche auf. Das Anwendungsspektrum reicht dabei vom einfachen Aufschmelzen eines Metalls in einem offenen Tiegel bis hin zur vollständigen Levitation. Auch der sogenannte RGS-Prozess, ein substratbasiertes Kristallisationsverfahren zur Herstellung siliziumbasierter Dünnschichtmaterialien, ist dafür ein Beispiel. Um bei solchen Prozessen die Interaktion von Magnetfeld und Strömung zu untersuchen, ist die numerische Simulationen ein wertvolles Hilfsmittel. Für beliebige dreidimensionale Probleme werden entsprechende Berechnungen bisher durch eine externe Kopplung kommerzieller Programme realisiert, die für Magnetfeld und Strömung jeweils unterschiedliche numerische Techniken nutzen. Diese Vorgehensweise ist jedoch im Allgemeinen mit unnötigem Rechenaufwand verbunden. In dieser Arbeit wird ein neu entwickelter Methodenapparat auf Basis der FVM vorgestellt, mit welchem sich diese Art von Berechnungen effizient durchführen lassen. Mit der Implementierung dieser Methoden in foam-extend, einer erweiterten Version der quelloffenen Software OpenFOAM, ist daraus ein leistungsfähiges Werkzeug in Form einer freien Simulationsplattform entstanden, welches sich durch einen modularen Aufbau leicht erweitern lässt. Mit dieser Plattform wurden in foam-extend auch erstmalig dreidimensionale Induktionsprozesse im Frequenzraum gelöst.
|
Page generated in 0.1407 seconds