The dye-sensitized solar cell (DSC) is a promising efficient low-cost molecular photovoltaic device. One of the key components in DSCs is the dye, as it is responsible for the capture of sunlight. State-of-the-art DSC devices, based on ruthenium dyes, show record efficiencies of 10-12 %. During the last decade, metal-free organic dyes have been extensively explored as sensitizers for DSC application. The use of organic dyes is particularly attractive as it enables easy structural modifications, due to fairly short synthetic routes and reduced material cost. Novel dye should in addition to the light-harvesting properties also be compatible with the DSC components. In this thesis, a series of new organic dyes are investigated, both when integrated in the DSC device and as individual components. The evaluation methods consisted of different electrochemical and photoelectrochemical techniques. Whereas the light-harvesting properties of the dyes were fairly easily improved, the behavior of the dye integrated in the DSC showed less predictable photovoltaic results. The dye series studied in Papers II and IV revealed that their dye energetics limited vital electron-transfer processes, the dye regeneration (Paper II) and injection quantum yield (Paper IV). Further, in Papers III-VI, it was observed that different dye structures seemed to alter the interfacial electron recombination with the electrolyte. In addition to the dye structure sterics, some organic dyes appear to enhance the interfacial recombination, possibly due to specific dye-redox acceptor interaction (Paper V). The impact of dye sterical modifications versus the use of coadsorbent was explored in Paper VI. The dye layer properties in the presence and absence of various coadsorbents were further investigated in Paper VII. The core of this thesis is the identification of the processes and properties limiting the performance of the DSC device, aiming at an overall understanding of the compatibility between the DSC components and novel organic dyes. / QC 20100730

This thesis deals with the device physics of organic solar cells. Organic photovoltaics (OPV) is a field of applied research which has been growing rapidly in the last decade leading to a current record value of power-conversion efficiency of 10 percent. One major reason for this boom is a potentially low-cost production of solar modules on flexible (polymer) substrate. Furthermore, new application are expected by flexible or semitransparent organic solar cells. That is why several OPV startup companies were launched in the last decade. Organic solar cells consist of hydrocarbon compounds, deposited as ultrathin layers (some tens of nm) on a substrate. Absorption of light leads to molecular excited states (excitons) which are strongly bound due to the weak interactions and low dielectric constant in a molecular solid. The excitons have to be split into positive and negative charges, which are subsequently collected at different electrodes. An effective dissociation of excitons is provided by a heterojunction of two molecules with different frontier orbital energies, such that the electron is transfered to the (electron) acceptor and the positive charge (hole) remains on the donor molecule. This junction can be realized by two distinct layers forming a planar heterojunction or by an intermixed film of donor and acceptor, resulting in a bulk heterojunction. Electrodes are attached to the absorber to collect the charges by providing an ohmic contact in the optimum case. This work focuses on the electrical processes in organic solar cells developing and employing a one-dimensional drift-diffusion model. The electrical model developed here is combined with an optical model and covers the diffusion of excitons, their separation, and the subsequent transport of charges. In contrast to inorganics, charge-carrier mobilities are low in the investigated materials and charge transport is strongly affected by energy barriers at the electrodes. The current-voltage characteristics (J-V curve) of a solar cell reflect the electrical processes in the device. Therefore, the J-V curve is selected as means of comparison between systematic series of simulation and experimental data. This mainly qualitative approach allows for an identification of dominating processes and provides microscopic explanations. One crucial issue, as already mentioned, is the contact between absorber layer and electrode. Energy barriers lead to a reduction of the power-conversion efficiency due to a decrease in the open-circuit voltage or the fill factor by S-shaped J-V curve (S-kink), which are often observed for organic solar cells. It is shown by a systematic study that the introduction of deliberate barriers for charge-carrier extraction and injection can cause such S-kinks. It is explained by simulated electrical-field profiles why also injection barriers lead to a reduction of the probability for charge-carrier extraction. A pile-up of charge carriers at an extraction barrier is confirmed by measurements of transient photocurrents. In flat heterojunction solar cells an additional reason for S-kinks is found in an imbalance of electron and hole mobilities. Due to the variety of reasons for S-kinks, methods and criteria for a distinction are proposed. These include J-V measurements at different temperatures and of samples with varied layer thicknesses. Most of the studies of this this work are based on experimental data of solar cells comprisiing the donor dye zinc phthalocyanine and the acceptor fullerene C60. It is observed that the open-circuit voltage of these devices depends on the mixing ratio of ZnPc:C60. A comparison of experimental and simulation data indicates that the reason is a changed donor-acceptor energy gap caused by a shift of the ionization potential of ZnPc. A spatial gradient in the mixing ratio of a bulk heterojunction is also investigated as a donor(acceptor)-rich mixture at the hole(electron)-collecting contact is supposed to assist charge extraction. This effect is not observed, but a reduction of charge-carrier losses at the “wrong” electrode which is seen at an increase in the open-circuit voltage. The most important intrinsic loss mechanism of a solar cell is bulk recombination which is treated at the example of ZnPc:C60 devices in the last part of this work. An examination of the dependence of the open-circuit voltage on illumination intensity shows that the dominating recombination mechanism shifts from trap-assisted to direct recombination for higher intensities. A variation of the absorption profile within the blend layer shows that the probability of charge-carrier extraction depends on the locus of charge-carrier generation. This results in a fill factor dependent on the absorption profile. The reason is an imbalance in charge-carrier mobilities which can be influenced by the mixing ratio. The work is completed by a simulation study of the influence of charge-carrier mobilities and different recombination processes on the J-V curve and an identification of a photoshunt dominating the experimental linear photocurrent-voltage characteristics in reverse bias. / Diese Dissertation beschäftigt sich mit der Physik organischer Solarzellen. Die organische Photovoltaik ist ein Forschungsgebiet, dem in den letzten zehn Jahren enorme Aufmerksamkeit zu Teil wurde. Der Grund liegt darin, dass diese neuartigen Solarzellen, deren aktueller Rekordwirkungsgrad bei 10 Prozent liegt, ein Potential für eine kostengünstige Produktion auf flexiblem (Polymer)substrat aufweisen und aufgrund ihrer Vielfältigkeit neue Anwendungsbereiche für die Photovoltaik erschließen. Organische Solarzellen bestehen aus ultradünnen (einige 10 nm) Schichten aus Kohlenwasserstoffverbindungen. Damit der photovoltaische Effekt genutzt werden kann, müssen die durch Licht angeregten Molekülzustände zu freien Ladungsträgern führen, wobei positive und negative Ladung an unterschiedlichen Kontakten extrahiert werden. Für eine effektive Trennung dieser stark gebundenden lokalisierten angeregten Zustände (Exzitonen) ist eine Grenzfläche zwischen Molekülen mit unterschiedlichen Energieniveaus der Grenzorbitale erforderlich, sodass ein Elektron auf einem Akzeptor- und eine positive Ladung auf einem Donatormolekül entstehen. Diese Grenzschicht kann als planarer Heteroübergang durch zwei getrennte Schichten oder als Volumen-Heteroübergang in einer Mischschicht realisiert werden. Die Absorberschichten werden durch Elektroden kontaktiert, wobei es für effiziente Solarzellen erforderlich ist, dass diese einen ohmschen Kontakt ausbilden, da ansonsten Verluste zu erwarten sind. Diese Arbeit behandelt im Besonderen die elektrischen Prozesse einer organischen Solarzelle. Dafür wird ein eindimensionales Drift-Diffusionsmodell entwickelt, das den Transport von Exzitonen, deren Trennung an einer Grenzfläche und die Ladungsträgerdynamik beschreibt. Abgesehen von den Exzitonen gilt als weitere Besonderheit einer organischen Solarzelle, dass sie aus amorphen, intrinsischen und sehr schlecht leitfähigen Absorberschichten besteht. Elektrische Effekte sind an der Strom-Spannungskennlinie (I-U ) sichtbar, die in dieser Arbeit als Hauptvergleichspunkt zwischen experimentellen Solarzellendaten und den Simulationsergebnissen dient. Durch einen weitgehend qualitativen Vergleich können dominierende Prozesse bestimmt und mikroskopische Erklärungen gefunden werden. Ein wichtiger Punkt ist der schon erwähnte Kontakt zwischen Absorberschicht und Elektrode. Dort auftretende Energiebarrieren führen zu einem Einbruch im Solarzellenwirkungsgrad, der sich durch eine Verringerung der Leerlaufspanung und/oder S-förmigen Kennlinien (S-Knick) bemerkbar macht. Anhand einer systematischen Studie der Grenzfläche Lochleiter/Donator wird gezeigt, dass Energiebarrieren sowohl für die Ladungsträgerextraktion als auch für die -injektion zu S-Knicken führen können. Insbesondere die Tatsache, dass Injektionsbarrieren sich auch negativ auf den Photostrom auswirken, wird anhand von simulierten Ladungsträger- und elektrischen Feldprofilen erklärt. Das Aufstauen von Ladungsträgern an Extraktionsbarrieren wird durch Messungen transienter Photoströme bestätigt. Da S-Knicke in organischen Solarzellen im Allgemeinen häufig beobachtet werden, werden weitere Methoden vorgeschlagen, die die Identifikation der Ursachen ermöglichen. Dazu zählen I-U Messungen in Abhängigkeit von Temperatur und Schichtdicken. Als eine weitere Ursache von S-Knicken werden unausgeglichene Ladungsträgerbeweglichkeiten in einer Solarzelle mit flachem Übergang identifiziert und von den Barrierefällen unterschieden. Weiterer Forschungsgegenstand dieser Arbeit sind Mischschichtsolarzellen aus dem Donator-Farbstoff Zink-Phthalozyanin ZnPc und dem Akzeptor Fulleren C60. Dort wird beobachtet, dass die Leerlaufspannung vom Mischverhältnis abhängt. Ein Vergleich von Experiment und Simulation zeigt, dass sich das Ionisationspotenzial von ZnPc und dadurch die effektive Energielücke des Mischsystems ändern. Zusätzlich zu homogenen Mischschichten werden Solarzellen untersucht, die einen Gradienten im Mischungsverhältnis aufweisen. Die Vermutung liegt nahe, dass ein hoher Donatorgehalt am Löcherkontakt und ein hoher Akzeptorgehalt nahe des Elektronenkontakts die Ladungsträgerextraktion begünstigen. Dieser Effekt ist in dem hier untersuchten System allerdings vergleichsweise irrelevant gegenüber der Tatsache, dass der Gradient das Abfließen bzw. die Rekombination von Ladungsträgern am “falschen” Kontakt reduziert und somit die Leerlaufspannung erhöht. Der wichtigste intrinsische Verlustmechanismus einer Solarzelle ist die Rekombination von Ladungsträgern. Diese wird im letzten Teil der Arbeit anhand der ZnPc:C60 Solarzelle behandelt. Messungen der Leerlaufspannung in Abhängigkeit von der Beleuchtungsintensität zeigen, dass sich der dominierende Rekombinationsprozess mit zunehmender Intensität von Störstellenrekombination zu direkter Rekombination von freien Ladungsträgern verschiebt. Eine gezielte Variation des Absorptionsprofils in der Absorberschicht zeigt, dass die Ladungsträgerextraktionswahrscheinlickeit vom Ort der Ladungsträgergeneration abhängt. Dieser Effekt wird hervorgerufen durch unausgeglichene Elektronen- und Löcherbeweglichkeiten und äußert sich im Füllfaktor. Weitere Simulationsergebnisse bezüglich des Einflusses von Ladungsträgerbeweglichkeiten und verschiedener Rekombinationsmechanismen auf die I-U Kennlinie und die experimentelle Identifikation eines Photoshunts, der den Photostrom in Rückwärtsrichtung unter Beleuchtung dominiert, runden die Arbeit ab.

Le développement des énergies renouvelables est aujourd’hui devenu un enjeu mondial majeur comme alternative aux énergies fossiles dans la production d'énergie. Parmi elles, l’énergie solaire est considérée comme la source la plus prometteuse, permettant de couvrir l’ensemble des besoins énergétiques liés à l’activité humaine. Les cellules photovoltaïques les plus performantes aujourd’hui, entre 16 et 18 % en modules, sont composées de silicium, un semi-conducteur inorganique. Cependant, leur coût de production élevé a nécessité le développement de matériaux alternatifs moins couteux. Parmi les voies explorées, les cellules solaires organiques ont émergé comme une alternative prometteuse pour produire l’électricité à faible coût. Le sujet de cette thèse s’intègre dans ce contexte de recherche. Deux types de cellules solaires ont été étudiés : les cellules à hétérojonction en volume (BHJ) et sensibilisées au colorant (DSSCs). Le courant photogénéré repose généralement (i) dans les cellules BHJ, sur le transfert entre de charge entre un polymère donneur et un accepteur d’électrons (fullerène), tels que le couple poly(3-hexyl)thiophène (P3HT) et [6,6]-phényl-C61-butanoate de méthyle (PCBM), et (ii) dans les DSSCs, la sensibilisation de la surface d’un semi-conducteur inorganique tel que l’oxyde de titane par un colorant et la présence d’un électrolyte, jouant le rôle de médiateur redox. Bien qu’ayant atteint des rendements de photoconversion respectifs de 5 et 13 %, ces cellules nécessitent des améliorations pour une commercialisation à grande échelle. Tout d’abord, les performances des cellules BHJ à base de P3HT sont considérablement limitées par sa faible absorption, ne couvrant pas la globalité du spectre solaire. Afin de palier ce problème, nous avons combiné le P3HT avec des chromophores, i.e. des porphyrines, ayant une absorption plus étendue. Ensuite, pour assurer une meilleure extraction des charges au sein du dispositif, une couche interfaciale cathodique à base de polyélectrolytes pi-conjugués a été ajoutée. Enfin, des colorants extraits de la biomasse ont été préparés afin de remplacer les colorants coûteux à base de ruthénium. En outre, les électrolytes liquides étant volatils et corrosifs, ce qui limite considérablement la stabilité des DSSCs, des électrolytes solides à base de polymères ont été étudiés comme alternative. / Among renewable energies, the sunlight has by far the highest theoretical potential to meet the worldwide need in energy. Photovoltaic devices are thus currently the subject of intense research for low-cost conversion of sunlight into electrical power. In particular, organic photovoltaics have emerged as an interesting alternative to produce electricity due to their low manufacturing cost compared to silicon solar cells, their mechanical flexibility and the versatility of the possible chemical structures. In this dissertation, we focused our research on the development of new organic pi-conjugated materials for organic solar cells applications. Two types of solar cells have been studied during this work: bulk heterojunction and dye-sensitized solar cells. The charge transfer leading to the photocurrent is usually based on (i) a polymer donor and a fullerene acceptor in BHJ solar cells, such as the widely studied poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) materials and (ii) a metal oxide (titanium oxide) sensitized with a dye and an electrolyte in DSSCs. Despite power conversion efficiencies have reached 5 and 13 % respectively for these two types of devices, they still display several drawbacks that limit their commercialization. P3HT displays a narrow absorption of the solar spectrum thus limiting the conversion efficiency. To overcome this limitation, we combined P3HT with chromophores, i.e. porphyrins, having an extending absorption. Then, to ensure better charge transfer and extraction within the device, a cathode interfacial layer based on cationic pi-conjugated polyelectrolytes was added. Finally, dyes extracted from the biomass (chlorophyll a derivatives) were synthesized to replace the expensive ruthenium dyes in DSSCs. Since liquid electrolytes are volatile and corrosive, which considerably limit the DSSCs stability, solid polymer electrolytes were also developed as an alternative.

This thesis outlines investigations of metal oxide/organic interfaces in photo-voltaic devices. It focuses on device instabilities originating from the metal oxide layer surface sensitivity and it presents suggested mechanisms behind these in- stabilities. A simple sol-gel solution deposition technique for the fabrication of stable and highly performing transparent conducting mixed metal oxides (ZnMO) is presented. It is demonstrated that the use of amorphous, mixed metal oxides allows improving the performance and stability of interfacial charge extraction layers for organic solar cells. Two novel ternary metal oxides, zinc-strontrium- oxide (ZnSrO) and zinc-barium-oxide (ZnBaO), were fabricated and their use as electron extraction layers in inverted organic photovoltaics is investigated. We show that using these ternary oxides can lead to superior devices by: prevent- ing a dipole forming between the oxide and the active organic layer in a model ZnMO/P3HT:PCBM OPV as well as lead to improved surface coverage by a self assembled monolayer and promote a significantly improved charge separation efficiency in a ZnMO/P3HT hybrid device. Additionally a spectroscopic technique allowing a versatility of characterisa- tion for long-term stability investigations of organic solar cells is reported. A device instability under broadband light exposure in vacuum conditions for an inverted ZnSrO/PTB7:PC71BM OPV is observed. Direct spectroscopic evidence and electrical characterisation indicate the formation of the PC71BM radical an- ion associated with a loss in device performance. A charge transfer mechanism between a heavily doped oxide layer and the organic layers is suggested and dis- cussed.

Photovoltaic cells are a promising solution to the current energy crisis. Among the different photovoltaic cell technologies developed, dye-sensitised solar cells (DSSC) are emerging as viable low-cost alternatives to Si PV technology. This thesis presents studies on fabrication and characterisation of TiO2 based dye-sensitised solar cells. Chapter 1 gives an overview of different photovoltaic cell technologies and a review of the state-of-the art DSSC technology. Chapter 2 describes the techniques used for characterisation of DSSCs. Chapter 3 describes the fabrication of TiO2 based dye-sensitised solar cells. Chapter 4 presents the analysis of measurements obtained by the characterisation techniques. Finally chapter 5 summarises the work done and suggests directions for future work.

No description available.

The perceived battery capacity of battery-powered devices can be increased by harvesting energy from readily available sources. Third generation solar cells are a good candidate for this purpose since they can be integrated with these battery-powered devices and harvest power from diffused light. For a single third generation solar cell to be useful in the context of charging a Lithium based battery, the voltage must be increased tenfold. To increase this perceived battery capacity as much as possible, efficiency is crucial. In this thesis, DCDC converter topologies and designs are studied from a system design perspective. The specifications of a converter suitable for interfacing Dye-Sensitised Solar Cells with Lithium batteries are described and a market research is conducted based on those specifications. A comparison of the available commercial solutions is presented, highlighting the most suitable options. However, none of the commercial solutions met the specifications to the full extent. The design process of two DC-DC converters is presented, one is a Boost converter operating in Continuous Conduction Mode and the other is a Boost converter operating in Discontinuous Conduction Mode. A comparison of the two designs highlights the advantages of operating the Boost converter in Discontinuous Conduction Mode when interfaced with a Dye-Sensitised Solar Cell. The design with a Boost converter operating in Discontinuous Conduction Mode has an efficiency of 80.3 % and is capable of tracking the Maximum Power Point of the Dye-Sensitised Solar Cell. / Den uppfattade batterikapaciteten hos batteridrivna enheter kan ökas genom att skörda energi från lättillgängliga källor. Tredje generationens solceller är en bra kandidat för detta ändamål eftersom de kan integreras med dessa batteridrivna enheter och skörda ström från spritt ljus. För att en enda tredje generationens solcell ska vara användbar i samband med laddning av ett litiumbaserat batteri måste spänningen ökas tiofaldigt. För att öka denna uppfattade batterikapacitet så mycket som möjligt är effektiviteten avgörande. I denna avhandling studeras topologier och strategier för DC-DC-omvandlare från ett systemdesignperspektiv. Specifikationerna för en omvandlare som är lämplig för att ansluta Dye-sensitized solceller med litiumbatterier beskrivs och en marknadsundersökning utförs utifrån dessa specifikationer. En jämförelse av de tillgängliga kommersiella lösningarna presenteras och belyser de lämpligaste alternativen. Ingen av de kommersiella lösningarna uppfyllde emellertid specifikationerna i sin helhet. Designprocessen för två DC-DComvandlare presenteras, en Boost-omvandlare som arbetar i kontinuerligt ledande läge och en Boost-omvandlare som arbetar i diskontinuerligt ledande läge. En jämförelse av de två designerna belyser fördelarna med att driva Boost-omvandlaren i diskontinuerligt ledningsläge när den kopplats till en färgkänslig solcell. Konstruktionen med en Boostomvandlare som arbetar i diskontinuerlig ledningsläge har en effektivitet på 80.3 % och kan spåra den maximala effektpunkten för solcellen.

This thesis details the development of a novel photovoltaic device based on organometal halide perovskites. The initial focus of this thesis begins with the study of lighttrapping strategies in solid-state dye-sensitised solar cells (detailed in chapter 3). While I report enhancement in device performance through the application of near and far-field light-trapping techniques, I find that improvements remain step-wise due to fundamental limitations currently employed in dye-sensitised solar cell technology— notably, the available light-sensitising materials. I found a promising yet under researched family of materials in the methyl ammonium tri-halide plumbate perovskite (detailed in chapter 4). The perovskite light-sensitiser was applied to the traditional mesoscopic sensitised solar cell device architecture as a replacement to conventional dye yielding world-record breaking photo-conversion e!ciencies for solid-state sensitised solar cells as high as 8.5%. The system was further developed leading to the conception of a novel device architecture, termed the mesoporous superstructured solar cell (MSSC), this new architecture replaces the conventional mesoporous titanium dioxide semiconductor with a porous insulating oxide in aluminium oxide, resulting in very low fundamental losses evidenced through high photo-generated open-circuit voltages of over 1.1 V. This development has delivered striking photo-conversion ef- ficiencies of 10.9% (detailed in chapter 6).

FLUORINATED ARENE, IMIDE AND LACTAM-FUNCTIONALIZED DONOR ACCEPTOR CONJUGATED POLYMERS: SYNTHESIS, STRUCTURE-PROPERTY AND DEVICE STUDIES After the discovery of doped polyacetylene, organic semiconductor materials are widely studied as high impending active components in consumer electronics. They have received substantial consideration due to their potential for structural tailoring, low cost, large area and mechanically flexible alternatives to common inorganic semiconductors. To acquire maximum use of these materials, it is essential to get a strong idea about their chemical and physical nature. Material chemist has an enormous role to play in this novel area, including development of efficient synthetic methodologies and control the molecular self-assembly and (opto)-electronic properties. The body of this thesis mainly focuses on the substituent effects: how different substituent’s affect the (opto)-electronic properties of the donor-acceptor (D-A) conjugated polymers. The main priority goes to understand, how different alkyl substituent effect to the polymer solubility, crystallinity, thermal properties (eg: glass transition temperature) and morphological order. Three classes of D-A systems were extensively studied in this work. The second chapter mainly focuses on the synthesis and structure-property study of fluorinated arene (TFB) base polymers. Here we used commercially available 1,4-dibromo-2,3,5,6-tetrafluorobenzene (TFB) as the acceptor material and prepare several polymers using 3,3’-dialkyl(3,3’-R2T2) or 3,3’-dialkoxy bithiophene (3,3’-RO2T2) units as electron donors. A detail study was done using 3,3’-bithiophene donor units incorporating branched alkoxy-functionalities by systematic variation of branching position and chain length. The study allowed disentangling the branching effects on (i) aggregation tendency, intermolecular arrangement, (iii) solid state optical energy gaps, and (iv) electronic properties in an overall consistent picture, which might guide future polymer synthesis towards optimized materials for opto-electronic applications. The third chapter mainly focused on the structure-property study of imide functionalized D-A polymers. Here we used thiophene-imide (TPD) as the acceptor moiety and prepare several D-A polymers by varying the donor units. When selecting the donor units, more priority goes to the fused ring systems. One main reason to use imide functionality is due to the, open position of the imide nitrogen, which provides an attaching position to alkyl substituent. Through this we can easily manipulate solubility and solid state packing arrangement. Also these imide acceptors have low-lying LUMOs due to their electron deficient nature and this will allow tuning the optical energy gap by careful choice of donor materials with different electron donating ability. The fourth chapter mainly contribute to the synthesis and structure property study of a completely novel electron acceptor moiety consist of a unsaturated pyrrolidinone unit known as Pechmann dye (PD) core. Pechmann dyes are closely related to the Indigo family. This can refer as 3-butenolide dimer connected via an alkene bridge, containing a benzene ring at the 5 and 5’ positions of the lactone rings. We have prepared several D-A polymers using this PD system with benzodithiophene (BDT) as the donor unit. Different to common D-A polymers the HOMO and LUMO of the PD acceptor moiety are energetically located within the gap of the BDT, so that the electronic and optical properties (HOMO-LUMO transition) are dictated by the PD properties. The promising electronic properties, band gaps, high absorption coefficients and broad absorption suggest this new D-A polymers as an interesting donor material for organic solar cell (OSC) applications.

<p>För att undersöka skillnad i prestationsförmåga mellan celler sensiterade med växtextraktsbaserad färg, och celler sensiterademed ruteniumkomplex-baserad färg, samt huruvida presskraften påverkar en cells prestationsförmåga, tillverkades icke-slutna fotoelektrokemiska färg-sensiterade solceller med tunnfilmsfotoelektroder av pressad, nanoporös titandioxid.</p><p>Cellerna pressades med tre olika presskrafter och sensiterades med växtextraktsfärg från rödkål, rödbeta, viol och henna, samt en ruteniumkomplex-baserad färg som fick utgöra kontrollbetingelse. För varje cell uppmättes IPCE- och iV-värde och motsvarande fyllnadsgrad (fill factor) och dessa jämfördes.</p><p>Ingen signifikant skillnad kunde fastställas mellan celler pressade med olika presstryck. Bland cellerna sensiterade med växtextraktbaserad färg presterade rödbeta bäst. Cellen med högst effektivitet hade fyllnadsgraden 70%. Emellertid uppvisade de växtfärgade cellerna genomgående sämre effektivitet än de rutenium-sensiterade och fotoströmmarna var mycket låga. IPCE-värdena var allmännt låga: den bäst presterande cellen hade ett IPCE-värde på något över 0,06 i våglängdsintervallet 440-470 nm. En förklaring till detta är de övriga ämnen som förutom pigment återfinns i de växtbaserade färgerna. Dessa hindrar pigmentmättnad och förhindrar att växtfärgen når ruteniumfärgens intensitet. En annan anledning består i svårigheten att passa ihop energinivåerna i cellens elektrolyt-halvledarsystem med energinivåerna hos pigmentet i växtfärgen.</p> / <p>Non-sealed photoelectrochemical dye sensitised solar cells (DSSC) with pressed nanoporous TiO2 thin film photoelectrodes were manufactured for the purposes of finding out whether plant extractbased dye sensitised cells can perform as well as ruthenium complex-based dye sensitised cells and whether the pressing force affects the cell performance.</p><p>The cells were pressed with three different pressing forces and sensitised with plant extracts from red cabbage, beetroot, violet and henna, as well as with a ruthenium complex-based dye for comparison. The IPCE and iV values and the corresponding fill factors of the cells were evaluated and compared.</p><p>No significant difference between the cells pressed with different pressing forces could be established. Among the plant extract-based dye sensitised cells the ones sensitised with beetroot extract performed best. The cell that achieved the highest efficiency had a fill factor of 70%. Compared to the ruthenium-sensitised cells the overall performance of the plant dye sensitised cells were very poor and the produced photocurrents very low. The IPCE values were generally low: one of the best-performing cells had an IPCE value of slightly over 0.06 in the 440-470 nm wavelength ranges. One reason for this is that it is difficult to obtain a plant extract dye as intense and deep in colour as ruthenium complex-based dyes, since pigment saturation is obstructed by the presence of other chemical compounds in the plant extracts. Another is that it is a delicate and difficult matter to match the energy levels in the electrolyte-semiconductor system with the energy levels of the pigments in the plant extract dye.</p>