Orientador: Susanne Rath / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-10T22:20:57Z (GMT). No. of bitstreams: 1 Pereira_LeandroAlves_M.pdf: 1182437 bytes, checksum: 9e5bb63e48650f93fbbd8632bfc95f93 (MD5) Previous issue date: 2008 / Resumo: Resíduos de agrotóxicos presentes em alimentos podem exceder os limites máximos de resíduos, quando as boas práticas agrícolas não são respeitadas. Conseqüentemente, a determinação dos resíduos de agrotóxicos é extremamente importante para avaliar o uso apropriado dessas substâncias e os riscos à saúde humana decorrentes da sua presença nos alimentos. A determinação de resíduos de agrotóxicos em alimentos requer etapas de preparo de amostras que consistem, geralmente de etapas de extração, remoção de interferentes e concentração do analito anterior análise cromatográfica. Para tanto, tem sido largamente empregada a extração em fase sólida. O objetivo do presente trabalho foi a síntese e caracterização de polímeros de impressão molecular (MIP) para uso em cartuchos de extração em fase sólida, visando a determinação de fenitrotiona (FNT) em tomates. O polímero foi sintetizado a partir do ácido metacrílico (monômero funcional), etileno glicoldimetilacrilato (reagente de ligação cruzada), 2'2azo-bis-iso-butironitrila (iniciador radicalar) em diclorometano (solvente porogênico), usando a FNT como molécula molde. Também foi sintetizado um polímero de controle (NIP). O MIP foi caracterizado por técnicas de infravermelho de transformada de Fourier, ressonância magnética nuclear do estado sólido, microscopia de varredura eletrônica e porosimetria de sorção de nitrogênio. O modelo de Langmuir-Freundlich foi o que apresentou o melhor ajuste para descrever a adsorção da FNT no polímero. O MIP foi empregado em cartuchos de extração em fase sólida e as etapas de condicionamento, carregamento, lavagem e eluição otimizadas. A extração em fase sólida molecularmente impressa foi aplicada na determinação de FNT em amostras de tomates, usando a cromatografia líquida de alta eficiência associada a um detetor de arranjo de diodos. A eficiência de extração, para amostras branco de tomates fortificadas com 5mg g de FNT, foi de 65 %. Nenhum interferente foi observado nos cromatogramas no tempo de retenção da FNT, indicando a seletividade do polímero / Abstract: Pesticide residues present in food can exceed maximum residue level when good agricultural practices are not followed. Consequently, the determination of pesticide residues is extremely important to evaluate the appropriate use of theses substances and risks to human health due to their presence in food. The determination of pesticide residues in food requires sample preparation steps that consist mainly of extraction, clean-up, and concentration of the analyte prior to chromatographic quantitation.. For this purpose, solid-phase extraction has been widely employed. The aims of this work were the synthesis and characterization of a molecularly imprinted polymer (MIP) to be employed as a sorbent in solid phase extraction cartridges for the determination of fenitrothiom (FNT) in tomatoes. The polymer was synthesized using FNT as the template molecule, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linking monomer, and 2,2-azobis-isobutyronitrile as the initiator. Dichloromethane was used as the porogenic solvent. Also, a non-imprinted polymer was synthesized. The MIP was characterized using the following techniques: FT-IR, NMR, electronic microscopy and BET. The adsorption of FNT on the polymer was fitted to the Langmuir-Freundlich model. The polymer was used in the solid-phase extraction cartridges and the conditioning, sample loading, clean-up and elution steps were optimized. The molecularly imprinted solid phase extraction was used for the determination of FNT in tomatoes, using high performance liquid chromatography with a diode array detector. For extraction efficiency, for a fortified blank tomato sample (5 mg g FNT), was 65 %. No interferences were observed in the chromatograms at the retention time of FNT, indicating the selectivity of the polymer / Mestrado / Quimica Analitica / Mestre em Química

Este trabalho apresenta o desenvolvimento e aplicação de técnicas miniaturizadas de preparo de amostras para análises ambientais via GC-MS. Dentre elas aplicou-se a técnica de Extração em Fase Sólida (SPE) na análise do regulador de crescimento de plantas, paclobutrazol (PBZ), em amostras de solo. Um método foi desenvolvido, otimizado e validado para o emprego da técnica acoplada à cromatografia gasosa e espectrometria de massas (GC-MS) na análise de PBZ em solo. Foram desenvolvidas também barras in-house, para Extração por Sorção em Barras de Agitação (SBSE), preparadas com PDMS, otimizadas, validadas e aplicadas na extração de pesticidas organoclorados no modo headspace acoplado a GC-MS. Adicionalmente, novos recobrimentos para SBSE a partir da modificação do PDMS comumente utilizado visando mudanças nas características de polaridade das fases sortivas foram desenvolvidos. Seguindo a tendência de miniaturização desenvolveu-se um novo sistema nomeado de Extração Sortiva Refrigerada (RSE), a qual considera a teoria de equilíbrio da HSSE e da SPME refrigerada. A técnica foi otimizada e aplicada em amostras de água do rio de Atibaia, coletadas na região de Paulínia-SP. / This study describes the development and application of different miniaturized sample preparation techniques for environmental analysis via gas chromatography and mass spectrometry (GC-MS). Among those techniques, the Solid Phase Extraction (SPE) was applied to the analysis of plant growth regulator, called paclobutrazol (PBZ), in soil samples. A method was developed, optimized and validated for the application of the technique coupled to GC-MS for the analysis of PBZ in soil. In-house Stir Bar Sorptive Extraction (SBSE) was also developed, optimized, validated and applied to organochlorine pesticides extraction in water samples in headspace mode followed by GC-MS. Additionally, new coatings for SBSE based on the PDMS modification commonly used to change the polarity characteristics of the sorptive phases were developed. Following the miniaturization trend, a new system called Refrigerated Sorptive Extraction (RSE) was successfully developed. This system was built with similar refrigerated SPME and HSSE equilibrium. Such technique was optimized and applied on water samples from Atibaia´s river, collected in the region of Paulínia-SP.

Residuos de fármacos estão presentes em diversas matrizes ambientais e estudos focados na determinação destes tem ganhado grande importância nos últimos anos, devido ao aumento do consumo de medicamentos pela população. A questão do controle de resíduos de compostos farmacologicamente ativos no meio ambiente aquático foi reconhecida como uma das questões emergentes na Química Ambiental, e tem-se dado maior importância visto que os fármacos são encontrados em matrizes em estudos em concentrações de μgL-1 e ngL-1. Nesta pesquisa estudou-se três fármacos antiflamatórios que são amplamente consumidos pela população: diclofenaco, nimesulida e paracetamol. O método analítico foi desenvolvido e validado para a determinação destes fármacos em amostras de águas superficiais da cidade de São Carlos (SP). Inicialmente foi feita a validação do método proposto segundo a Resolução DOQ-CGCRE-008 do INMETRO. Os limites de detecção, e de quantificação e inferior de quantificação do método para a determinação do diclofenaco, nimesulida e paracetamol, foram, respectivamente, 0,5; 1,1 e 1,1 μgL-1. A linearidade, desvio-padrão relativo, exatidão e recuperação média para o diclofenaco foram, respectivamente, R de 0,99, 3,03%, 100,55% e 97,94%. Para a nimesulida, os valores de linearidade, desvio-padrão relativo, exatidão e recuperação, foram, R de 0,98, 2,43%, 101,46% e 100,67%. Já para o paracetamol obteve-se os seguintes valores para linearidade, desvio-padrão relativo, exatidão e recuperação, R de 0,99, 3,50%, 97,94% e 93,17%, respectivamente. Na segunda etapa deste estudo aplicou-se o método validado na análise de amostras de águas coletadas na cidade de São Carlos (SP). Para o método de extração utilizou-se a extração em fase sólida (SPE) e como técnica analítica utilizou-se o HPLC/DAD. Os resultados não indicaram a presença dos fármacos diclofenaco, nimesulida e paracetamol até o limite de detecção do método empregado. / Residues of drugs are present in various environmental matrices and studies focused on the determination of these have gained in importance in recent years, due to increased drug consumption by the population. The issue of control of residues of pharmacologically active compounds in the aquatic environment was recognized as one of the emerging issues in environmental chemistry, and has given greater importance since the drugs are found in studies in matrices at concentrations μgL-1 and ngL-1. In this study was studied three drugs that are widely consumed by the population: diclofenac, nimesulide and acetaminophen. The analytical method was developed for the determination of these drugs in surface water samples from São Carlos (SP). Initially, made a validation of the method proposed second resolution DOQ-008-CGCRE INMETRO. The detection, quantification and lower quantification limits of method for determining of diclofenac, nimesulide and paracetamol were 0.5, 1.1 and 1.1 μgL-1, respectively. The linearity, relative standard , accuracy and average recovery of the method for diclofenac were, respectively, R equal to 0.99, 3.03%, 100.55% and 97.94%. For nimesulide, the values of linearity, relative standard, accuracy and recovery were R equal to 0.98, and 2.43%, 101.46% and 100.67%. For acetaminophen obtained the following values for linearity, relative standard, accuracy and recovery, R equal to 0.99, 3.50%, 97.94% and 93.17% respectively. In the second stage of the study applied the validated method in the analysis of water samples collected in the São Carlos (SP). For extracting the drugs, SPE cartridges were used followed by HPLC / DAD. The results indicate the absense of the studied drugs diclofenac, nimesulide and acetaminophen down to the detection limits of the method employed.

The occurrence and source distribution of organic micropollutants (OMPs) have been investigated in Swedish surface waters, in 23 rivers connected to the lakes Vänern, Vättern and Mälaren, 3 Wastewater treatment plants (WWTPs) and 3 Drinking water plants (DWTPs) located in the middle of Sweden was sampled. Compounds such as pharmaceuticals, industrial chemicals, pesticides, personal care products, hormones, Per- and polyflouroalkyl substances (PFASs), isoflavones, stimulants and parabens were selected. The analysis was done by using solid phase extraction (SPE) and Ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). Of the 121 studied compounds 91 was detected in concentration levels varying between a few ng/L up to 160 µg/L in wastewater effluent. The detected concentrations of 80 compounds in surface water from rivers varied from low ng L-1up to 3.3 µg/L, 43 OMPs within the range from low ng/L up to 370 ng/ L could be detected in the lakes and 35 OMPs could be found in levels from low ng/L up to 2.9 µg/L in the drinking water. The number of detected compounds and concentration levels clearly decreases from wastewater influent to effluent, rivers, lakes and lastly to drinking water. The concentration levels of OMPs in the surface water samples varied between sampling sites and the three lakes making it clear that Lake Mälaren is the most contaminated one out of these three. OMPs such as antibiotics, antidepressants and personal care products were most frequently detected in all samples. The highest total OMP concentration levels were found in Enköping river (79 µg/L), Lövsta river (33 µg/L), Ösan (16 µg/L) and Lillån (13 µg/L). A risk assessment for drinking water with regard to human health was conducted for two compounds by calculating the Benchmark Quotient (BQ) using drinking water equivalent levels (DWELs). Two compounds, carbamazepine and bezafibrate, was selected based on detection frequency and available toxicity data. While bezafibrate didn’t show any indications of risk to human health, carbamazepine had a BQ of 1.47 which indicates a risk to human health when humans are exposed to these concentration levels over a period of a lifetime. / Genom att använda en målanalys har förekomsten och fördelningen av organiska mikroföroreningar i svenska ytvatten studerats. Vattenprover från 23 vattendrag som antingen mynnar ut i eller börjar i någon av sjöarna Vänern, Vättern eller Mälaren, tre avloppsreningsverk och tre dricksvattenverk i mellersta Sverige har samlats in. Ämnen så som läkemedel, industriella kemikalier, pesticider, hudvårdsprodukter, hormoner, högflorerade ämnen (PFAS), isoflavoner, stimulanter och parabener valdes ut och analyserades med hjälp av fastfasextraktion och vätskekromatografi kopplad till masspektrometer (UPLC-MS/MS).Av de 121 utvalda ämnena kunde 91 av dessa detekteras i koncentrationer som varierade mellan några få ng L-1upp till 160 µg/L i utgående avloppsvatten. I vattendragen kunde 80 av de organiska mikroföroreningarna detekteras i koncentrationer mellan låga ng/L upp till 3.3 µg/L medan endast 43 kunde detekteras i sjöarna inom koncentrationsintervallet låga ng/L till 370 ng/L. Slutligen detekterades 29 mikroföroreningar i dricksvattnet där koncentrationerna varierade mellan några få ng/L upp till 2.9 µg/L. Resultatet visar att antalet detekterade organiska mikroföroreningar och deras respektive koncentrationer tydligt minskar vid jämförelse av de olika matriserna från ingående avloppsvatten till utgående, vattendrag, sjöar och slutligen i dricksvattnet. I ytvattenproverna varierade koncentrationsnivåerna av organiska mikroföroreningar mellan de olika vattendragen och det var tydligt att Mälaren är mer kontaminerad än Vänern och Vättern. Det gick också att se tydliga trender i vilka ämnen som vanligen detekterades i de olika proverna, särskilt bland läkemedlen då ämnen som är antibiotika-klassade eller hör till gruppen antidepressiva var vanligast förekommande. De högsta totala koncentrationerna av organiska mikroföroreningar kunde hittas i Enköpingsån (79 µg/L), Lövstaån (33 µg/L), Ösan (16 µg/L) samt Lillån (13 µg/L). Dessa fyra vattendrag är därmed de mest förorenade i denna studie och kan därför ses som särskilt förorenade. En riskanalys med hänsyn till människors hälsa gjordes på dricksvattnet genom att beräkna en referenskvot (BQ) med hjälp av ekvivalenta dricksvatten-nivåer (DWELs). De två ämnena karbamazepin och bezafibrat valdes på grund av deras detektionsfrekvens (FD) och tillgänglighet av toxicitetsdata. Bezafibrat visade ingen potentiell risk medan karbamazepin hade ett BQ-värde på 1,47 vilket indikerar en potentiell risk till människors hälsa om man utsätts för de funna koncentrationerna under hela sin livstid.

BACKGROUND:The SPE-8 group gene products transduce the signal for spermatid activation initiated by extracellular zinc in C. elegans. Mutations in the spe-8 group genes result in hermaphrodite-derived spermatids that cannot activate to crawling spermatozoa, although spermatids from mutant males activate through a pathway induced by extracellular TRY-5 protease present in male seminal fluid.RESULTS:Here, we identify SPE-8 as a member of a large family of sperm-expressed non-receptor-like protein-tyrosine kinases. A rescuing SPE-8::GFP translational fusion reporter localizes to the plasma membrane in all spermatogenic cells from the primary spermatocyte stage through spermatids. Once spermatids become activated to spermatozoa, the reporter moves from the plasma membrane to the cytoplasm. Mutations in the spe-8 group genes spe-12, spe-19, and spe-27 disrupt localization of the reporter to the plasma membrane, while localization appears near normal in a spe-29 mutant background.CONCLUSIONS:These results suggest that the SPE-8 group proteins form a functional complex localized at the plasma membrane, and that SPE-8 is correctly positioned only when all members of the SPE-8 group are present, with the possible exception of SPE-29. Further, SPE-8 is released from the membrane when the activation signal is transduced into the spermatid.

The current study gathers thermoplastics professionals’ perceptions on the implementation of lean-manufacturing in the Thermoplastics-manufacturing industry through Qualtrics, which is a survey website. From the professionals’ perceptions, the current study infers the current status of lean-manufacturing implementation in the thermoplastic-manufacturing industry and identifies the best lean theories and tools for the industry. However, the results of the current study are not generalizable to the entire thermoplastic-manufacturing industry. The current study reviews thermoplastic-manufacturing processes from the house of lean’s perspective. The foundations of the house are stability and standardization, the pillars are Just-In-Time (JIT) and Jidoka, the roof is customer focus, and the heart is employee involvement. Thermoplastic-manufacturing processes include extrusion, fiber spinning, film casting, film blowing, and injection molding. The questionnaire of this survey includes six rating-scale, two multiple-choice (multiple-answer), and three closed-ended questions. The questionnaire was distributed to the respondents through email, LinkedIn, and Society of Plastic Engineers (SPE). The expected responses’ quantity was 35. Since some of the respondents did not complete the whole survey, the actual responses’ quantity for each question was between 39 and 45. Based on the respondents’ perceptions, the implementation of lean manufacturing in the thermoplastic-manufacturing industry is incomplete. The industry professionals should put more attention and effort on the implementation of JIT and Jidoka. To fully implement JIT and Jidoka, thermoplastic-manufacturing companies should use lean tools that are related to JIT and Jidoka, such as kanban, takt time, heijunka, Value Stream Mapping (VSM), and poka-yoke, more often. Additionally, the thermoplasticmanufacturing industry practitioners perceived that the best lean theories for the industry were standardization, involvement, and stability, and the best lean tools were 5S, Total Production Maintenance (TPM), and poka-yoke

A aquicultura teve um aumento significativo em todo o mundo nos últimos anos. Muitas classes de antimicrobianos são usadas na aquicultura para o tratamento de infecções causadas por bactérias patogênicas. Entretanto, a contaminação do ambiente, do alimento e a ocorrência de resistência microbiana decorrentes da intensa utilização dos antimicrobianos são motivos de preocupação. Com o objetivo de se saber a ocorrência de antimicrobianos e possíveis formação de resistência microbiana em pisciculturas paulistas, um método rápido, sensível e simples de extração em fase sólida acoplada à cromatografia líquida e espectrometria de massas sequencial (SPE-LC-MS/MS), foi desenvolvido e validado para a determinação simultânea de 12 antimicrobianos (oxitetraciclina, tetraciclina, clortetraciclina, ciprofloxacina, enrofloxacina, sarafloxacina, norfloxacina, florfenicol, cloranfenicol, sulfatizol, sulfadimetoxina e sulfametazina) em água superficial e sedimento. Outro método, utilizando LC-MS/MS, foi elaborado para a determinação dos antimicrobianos em peixes. Paralelamente, também, foi avaliada a seleção de resistência microbiana dessas classes de antimicrobianos em peixe. Os antimicrobianos foram extraídos do sedimento com acetonitrila e tampão citrato, a fase orgânica foi eliminada e a purificação do extrato realizada com cartuchos SPE Strata SAX 500 mg Phenomenex. Os extratos de sedimento e as amostras de água (sem pré-tratamento) foram injetadas em um sistema analítico, pela primeira vez utilizado no Brasil, que consistia em uma pré-concentração com um amostrador automático equipado com um loop de 900 ?L, uma válvula usada para alternar entre os modos de carregamento ou eluição, duas bombas e um sistema de MS/MS. Os extratos de peixe foram purificados por filtração utilizando cartuchos Captiva ND. Sulfadimetoxina-d6 foi utilizado como padrão interno para aferir a precisão dos resultados. Os métodos desenvolvidos foram validados baseados na decisão da União Europeia 2002/657/CE. As amostras foram coletadas de 4 pisciculturas localizadas na represa da usina hidrelétrica de Ilha Solteira, Brasil. Foram feitas 4 amostragens no período de abril de 2013 a janeiro de 2014, totalizando 144 amostras de água, 144 de sedimento e 126 amostras de peixe. Resíduos de oxitetraciclina, tetraciclina e clortetraciclina foram encontrados em sedimentos e oxitetraciclina, tetraciclina e florfenicol foram identificados nas amostras de água e peixe; à medida que aumentava a distância dos tanques e o tamanho do peixe as quantidades encontradas nas amostras diminuíam. Isolou-se bactérias resistentes a quinolonas, tetraciclinas, sulfonamidas em 36 cepas e o índice de resistência múltipla a antibióticos (MAR), variou entre 0 e 0,86, ou seja, cepas sensíveis a 100% dos antimicrobianos testados e outras resistentes a 86%. De acordo com os resultados encontrados considera-se que ações mais restritivas são necessárias quanto ao uso intensivo de antibióticos na produção de peixes / The aquiculture has had a sharp increase worldwide in the last years. Many classes of antibiotics have been used in aquaculture to treat infections caused by a number of pathogenic bacteria. However, environmental and food contamination and bacterial resistance are the main concerns arisen by these intense uses. In order to know the occurrence of antibiotics and possible antimicrobial resistance in fish farms in São Paulo, a fast, sensitive, and simple on-line solid phase extraction to liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) was developed and validated for simultaneous assessment of 12 drugs (chloramphenicol, florfenicol, oxytetracycline, tetracycline, chlortetracycline, sulfadimethoxine, sulfathiazole, sulfamethazine, enrofloxacin, ciprofloxacin, norfloxacin, and sarafloxacin) in surface water and sediment. Another method using LC-MS/MS was elaborated to determine antibiotics in fish. In parallel, the selection of antimicrobial resistance of these classes of antibiotics in fish was evaluated. The antibiotics were extracted from sediment with acetonitrile and citric buffer, the organic phase was eliminated and the clean-up was made by Strata SAX 500 mg of Phenomenex. The water phase of sediment and water samples (without pre-treatment) was injected in the analytical system, which consisted of a pre-concentration with an automated liquid sampler fitted with a 900 ?L injection loop; a valve is used to switch between the load or elution modes, a pair of pumps and a MS/MS system, it is the first time that this system is used in Brazil. The fish extracts were cleaned by filtration by Captiva cartridges. Sulfadimethoxine-d6 was used as an internal standard to obtain more reliable results. The developed method was validated based in the European Union Decision 2002/657/EC. The samples were collected from 4 fish farms located in Ilha Solteira hydroelectric dam, Brazil. Four sampling were made in the period April/2013 until January/2014, totalizing 144 samples of water and sediment and 126 fish samples. Residues of oxytetracycline, tetracycline and chlortetracycline, were found in sediment and oxytetracycline, tetracycline, and florfenicol have been identified in water and fish samples, with increasing distance from the tanks and the size of the fishs the quantities of residue found in the samples decreased. Bacteria were resistant to quinolones, tetracyclines, sulfonamides in 36 strains and the multiple antibiotic resistance index (MAR) values ranged between 0 and 0.86, that is, strains with a sensitivity of 100% to the tested antimicrobials and others resistant of 86% to the tested antimicrobials. According to the results it is believed that more stringent measures are needed concerning the intensive use of antibiotics in fish production

A aquicultura teve um aumento significativo em todo o mundo nos últimos anos. Muitas classes de antimicrobianos são usadas na aquicultura para o tratamento de infecções causadas por bactérias patogênicas. Entretanto, a contaminação do ambiente, do alimento e a ocorrência de resistência microbiana decorrentes da intensa utilização dos antimicrobianos são motivos de preocupação. Com o objetivo de se saber a ocorrência de antimicrobianos e possíveis formação de resistência microbiana em pisciculturas paulistas, um método rápido, sensível e simples de extração em fase sólida acoplada à cromatografia líquida e espectrometria de massas sequencial (SPE-LC-MS/MS), foi desenvolvido e validado para a determinação simultânea de 12 antimicrobianos (oxitetraciclina, tetraciclina, clortetraciclina, ciprofloxacina, enrofloxacina, sarafloxacina, norfloxacina, florfenicol, cloranfenicol, sulfatizol, sulfadimetoxina e sulfametazina) em água superficial e sedimento. Outro método, utilizando LC-MS/MS, foi elaborado para a determinação dos antimicrobianos em peixes. Paralelamente, também, foi avaliada a seleção de resistência microbiana dessas classes de antimicrobianos em peixe. Os antimicrobianos foram extraídos do sedimento com acetonitrila e tampão citrato, a fase orgânica foi eliminada e a purificação do extrato realizada com cartuchos SPE Strata SAX 500 mg Phenomenex. Os extratos de sedimento e as amostras de água (sem pré-tratamento) foram injetadas em um sistema analítico, pela primeira vez utilizado no Brasil, que consistia em uma pré-concentração com um amostrador automático equipado com um loop de 900 ?L, uma válvula usada para alternar entre os modos de carregamento ou eluição, duas bombas e um sistema de MS/MS. Os extratos de peixe foram purificados por filtração utilizando cartuchos Captiva ND. Sulfadimetoxina-d6 foi utilizado como padrão interno para aferir a precisão dos resultados. Os métodos desenvolvidos foram validados baseados na decisão da União Europeia 2002/657/CE. As amostras foram coletadas de 4 pisciculturas localizadas na represa da usina hidrelétrica de Ilha Solteira, Brasil. Foram feitas 4 amostragens no período de abril de 2013 a janeiro de 2014, totalizando 144 amostras de água, 144 de sedimento e 126 amostras de peixe. Resíduos de oxitetraciclina, tetraciclina e clortetraciclina foram encontrados em sedimentos e oxitetraciclina, tetraciclina e florfenicol foram identificados nas amostras de água e peixe; à medida que aumentava a distância dos tanques e o tamanho do peixe as quantidades encontradas nas amostras diminuíam. Isolou-se bactérias resistentes a quinolonas, tetraciclinas, sulfonamidas em 36 cepas e o índice de resistência múltipla a antibióticos (MAR), variou entre 0 e 0,86, ou seja, cepas sensíveis a 100% dos antimicrobianos testados e outras resistentes a 86%. De acordo com os resultados encontrados considera-se que ações mais restritivas são necessárias quanto ao uso intensivo de antibióticos na produção de peixes / The aquiculture has had a sharp increase worldwide in the last years. Many classes of antibiotics have been used in aquaculture to treat infections caused by a number of pathogenic bacteria. However, environmental and food contamination and bacterial resistance are the main concerns arisen by these intense uses. In order to know the occurrence of antibiotics and possible antimicrobial resistance in fish farms in São Paulo, a fast, sensitive, and simple on-line solid phase extraction to liquid chromatography-tandem mass spectrometry (SPE-LC-MS/MS) was developed and validated for simultaneous assessment of 12 drugs (chloramphenicol, florfenicol, oxytetracycline, tetracycline, chlortetracycline, sulfadimethoxine, sulfathiazole, sulfamethazine, enrofloxacin, ciprofloxacin, norfloxacin, and sarafloxacin) in surface water and sediment. Another method using LC-MS/MS was elaborated to determine antibiotics in fish. In parallel, the selection of antimicrobial resistance of these classes of antibiotics in fish was evaluated. The antibiotics were extracted from sediment with acetonitrile and citric buffer, the organic phase was eliminated and the clean-up was made by Strata SAX 500 mg of Phenomenex. The water phase of sediment and water samples (without pre-treatment) was injected in the analytical system, which consisted of a pre-concentration with an automated liquid sampler fitted with a 900 ?L injection loop; a valve is used to switch between the load or elution modes, a pair of pumps and a MS/MS system, it is the first time that this system is used in Brazil. The fish extracts were cleaned by filtration by Captiva cartridges. Sulfadimethoxine-d6 was used as an internal standard to obtain more reliable results. The developed method was validated based in the European Union Decision 2002/657/EC. The samples were collected from 4 fish farms located in Ilha Solteira hydroelectric dam, Brazil. Four sampling were made in the period April/2013 until January/2014, totalizing 144 samples of water and sediment and 126 fish samples. Residues of oxytetracycline, tetracycline and chlortetracycline, were found in sediment and oxytetracycline, tetracycline, and florfenicol have been identified in water and fish samples, with increasing distance from the tanks and the size of the fishs the quantities of residue found in the samples decreased. Bacteria were resistant to quinolones, tetracyclines, sulfonamides in 36 strains and the multiple antibiotic resistance index (MAR) values ranged between 0 and 0.86, that is, strains with a sensitivity of 100% to the tested antimicrobials and others resistant of 86% to the tested antimicrobials. According to the results it is believed that more stringent measures are needed concerning the intensive use of antibiotics in fish production

Antibiotics are used as prophylactic agents to promote growth and for treating infections in animals. However, the irrational use of antibiotics in livestock management is a significant cause of the development of antibioticresistant genes in the environment. Each year 2 million people suffer from the infections caused by bacteria which are resistant to antibiotics and 23,000 of these people are estimated to die because of antibiotic resistance. New drugs are continually coming into the market but are at the risk of developing resistance. Thus, there is a need for the development of analytical methods which can be used to monitor these antibiotic concentrations in environmental samples. This research is focused on developing and validating a Solid Phase Extraction (SPE) procedure and liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for quantifying tylosin antibiotic in cattle waste. Tylosin was extracted from cattle waste samples using Strata polymeric weak cation cartridges by adding a sodium-EDTA buffer solution and methanol. Chemical analysis of the extracted tylosin was performed using a Varian 212-LC HPLC and Agilent 500 Ion Trap mass spectrometric detector. The concentrations of tylosin in study group animals were compared with respect to the date of sampling and cattle body weight with a control group and results are presented.

Oligonucleotides are synthetic strings of DNA or RNA used mostly for biochemical analysis and diagnostics. For them to be useful in these fields, a purity over 90% is most often required. However, when synthesizing these sequences, many “failures” (shorter sequences) are made in the step-wise process. The synthesized oligonucleotides need to therefore be purified. This is most often done with gel electrophoresis or liquid chromatography. These methods are, on the other hand, very time-consuming and laborious. Solid phase extraction (SPE) is a much faster purification method if optimized and it can be done with the standard cartridges as well as 96-well plates, that allow many samples to efficiently be run at the same time. With reversed phase (RP) SPE, the dimethoxytrityl (DMT) group, that is attached to the target at the final synthesis step, can be used for stronger retention to the bed sorbent and leaving only the target at the final eluting stage. The impurities without a DMT-on group, that do not adsorb to the sorbent, are washed away in earlier steps. The purpose of this study is to optimize an SPE method for purification of oligonucleotides. Two different cartridges, Clarity QSP (Phenomenex) and Glen-Pak (Glen Research) were used. The purity analysis and oligonucleotide identification were done using anion exchange - high performance liquid chromatography (AIE-HPLC) and time-of-flight mass spectrometry (TOF MS). To conclude, Clarity QSP achieved, at the most, a purity of 68.8% with the recommended SPE steps by Phenomenex. Alterations in the extraction procedure resulted in similar purity or lower. Glen-Pak reached a peak purity of 78.8% when doing a double salt wash of 5% ACN in 2 M sodium chloride and another double wash after detritylation with 1% acetonitrile. This method has to be further optimized in order to reach a purity of at least 90% to be useful in industrial settings.