O pólen apícola apresenta elevadas porcentagens de nutrientes e pode ser utilizado como suplemento nutricional na alimentação humana. Este trabalho teve por objetivo principal avaliar a estabilidade das vitaminas antioxidantes (vitamina C, E e &#946;-caroteno) em pólen apícola durante um ano de estocagem. Foram adquiridos entre os meses de março e abril 2007 seis lotes de pólen apícola in natura e desidratado, diretamente de entrepostos de comercialização de produtos apícolas. Foram analisadas as concentrações das três vitaminas no tempo zero e em seguida amostras foram armazenadas, em embalagens fornecidas pelo produtor, sob três formas: a temperatura ambiente; a temperatura ambiente, porém protegida da luz; em freezer. Foi utilizado o método títulométrico para análise de vitamina C. Para &#946;-caroteno utilizou-se a cromatografia em coluna aberta no tempo zero e cromatografia líquida de alta eficiência após 6 e 12 meses de estocagem. Esta última foi utilizada para as análises da vitamina E. Foram realizadas ainda análises polínica e de composição centesimal. Foram encontradas as seguintes variações: 14&#177;0,25 a 119&#177;1,961 &#181;g/g para vitamina C, 19,43&#177;1,70 a 45,00&#177;3,61&#181;g/g para vitamina E 3,77&#177;0,10 a 99,27&#177;2,45 &#181;g/g para &#946;-caroteno em amostras frescas. Após processo de desidratação, houve uma alteração de 67,1% para mais na vitamina C (diferença significativa p<0,05), uma perda de 18,7% para vitamina E e de 15,6% para &#946;-caroteno. O valor pró-vitamínico A das amostras desidratadas variou de 0,26 a 6,48 &#181;g/g. A composição centesimal das amostras estudadas está de acordo com as especificações estabelecidas pela legislação brasileira em vigor (Instrução Normativa N° 3, de 19/01/2001). Houve grande variabilidade dos tipos polínicos encontrados nas amostras e alguns deles estiveram fortemente correlacionados com os teores de vitamina C (Myrtaceae), de &#946;-caroteno (Arecaceae, Cecropia e Fabaceae) e de lipídeos (Arecaceae e Fabaceae). Outros estiveram correlacionados de forma negativa, como é o caso dos Mimosa caesalpineafolia e Poacease com os níveis de &#946;-caroteno, do tipo Arecaceae com as proteínas e do tipo Mimosa caesalpineafolia com os lipídeos. A estocagem em freezer foi a condição mais eficiente na conservação das três vitaminas e a perda na estocagem a temperatura ambiente exposto a luz e protegido da luz foram semelhantes. Considerando-se as três condições estudadas, a vitamina E parece ser mais preservada durante estocagem quando comparada à vitamina C e ao &#946;-caroteno. Entretanto, conforme teste estatístico realizado, houve perdas significativas (p<0,05) apenas para vitamina C em todas as condições estudadas quando comparadas a sua concentração inicial (tempo 0). / Bee pollen contains high percentages of nutrients and it can be used as a nutritional supplement for human feeding. The aim of this work was to evaluate the stability the antioxidant vitamins (vitamin C, E and &#946;-carotene) in bee pollen during one year of storage. Six batches of fresh and dried bee pollen pellets were acquired in 2007 March and April from bee products warehouses. The three vitamins were quantified and then stored under three forms in packages supplied by the producer: in room temperature, in room temperature protected from light and frozen. Vitamin C was quantified by potentiometric titration. The open column chromatography was used for &#946;-carotene analyses in the zero time and the high performance liquid chromatography after 6 and 12 months storage. This last one was used for the vitamin E analyses. The centesimal composition and botanical characterization of the bee pollen were obtained. Vitamin content in fresh samples varied between 14&#177;0.25 and 119&#177;1.96&#181;g/g for vitamin C; 19.43&#177;1.70 and 45.00&#177;3.61&#181;g/g for vitamin E and 3.77&#177;0.10 and 99.27&#177;2.45&#181;g/g for &#946;-carotene. After the drying process a significant alteration 67.1 % for more in the vitamin C (p<0.05), a losses of 18.7% for vitamin E and 15.6% for &#946;-carotene were observed. The provitamin A value was between 0.26 and 6.48&#181;g/g. The proximal composition of the samples studied presented results which were ali accordance to the specifications established for the Brazilian regulation (Normative Instruction N° 3, 19/01/2001). A great variability of the pollen types was found in the samples and some of them were strongly correlated with the vitamin C (Myrtaceae), &#946;-carotene (Arecaceae, Cecropia and Fabaceae) and lipids (Arecaceae and Fabaceae). Other ones were negatively correlated, such as Mimosa caesalpineafolia and Poaceae types with &#946;-carotene, Arecaceae type with proteins and Mimosa caesalpineafolia type with lipids. Storage in freezer was more efficient to keep the vitamins and the losses at room temperature storage when exposed to light and in the dark were similar. Vitamin E was more preserved during the storage when compared to vitamin C and &#946;-carotene. However, only vitamin C presented significant statistical losses (p<0.05) in ali of the studied conditions when compared to its initial content.

En el desarrollo del presente trabajo, se plantea desde el punto de vista técnico económico la importancia de la interacción de las partículas finas presentes en el mastic para dos técnicas que se presentan como innovadoras en el mundo de reciclado (RAP) de carreteras, tratamiento de carpetas con asfalto espumado y tratamiento con emulsiones asfálticas. Esta investigación se llevó a cabo en el proyecto “Servicio de reciclado Huancayo – Yanango – puente Herrería tramo III. Conforme se avanza en la investigación, se analiza y sintetiza una extensa revisión de bibliografía sobre la aplicación de las técnicas de tratamiento de carpetas con asfalto espumado y emulsiones asfálticas, de cada una se explica su historia, uso, producción, diseño para su desarrollo. Posteriormente, se explica la metodología para tener la secuencia del proceso para ambas técnicas, identificar la población, el tamaño de la muestra y las variables. Se da pase a la descripción del proyecto, en donde se presenta su ubicación, las características esenciales, el estudio de tráfico y estudio de la condición antes del proyecto. Además, se estudia las muestras y el resultado de los ensayos de pavimentos donde se ven las calicatas, el triturado de RAP a dimensiones de suelo, cálculo del número estructural de acuerdo con la resistencia saturada, resultados técnicos con asfalto espumado, con emulsión asfáltica, discusión de la solución adoptada y comparación económica de ambas técnicas. Finalmente, las conclusiones y recomendaciones que se encontraron en la presente investigación. / In the development of this work, the importance of the interaction of the fine particles present in the mast for two techniques that are presented as innovative in the world of road recycling (RAP), treatment of folders with foamed asphalt and treatment with asphalt emulsions. This research was carried out in the project "Recycling service Huancayo - Yanango - Herrería bridge section III. As the research progresses, an extensive review of the literature on the application of folder treatment techniques with foamed asphalt and asphalt emulsions is analyzed and synthesized, each of which explains its history, use, production, and design for its development. Subsequently, the methodology is explained to have the process sequence for the techniques, to identify the population, the sample size, and the variables. The description of the project is given, where its location, the essential characteristics, the traffic study and the condition study before the project are presented. In addition, the samples and the results of the tests of pavements where the test pits are seen, the grinding of RAP to soil dimensions, calculation of the structural number according to saturated resistance, technical results with foamed asphalt, with asphalt emulsion, are studied. discussion of the adopted solution and economic comparison of both techniques. Finally, the conclusions and recommendations found in the present investigation. / Tesis

Video acquired using a camera mounted on a mini Unmanned Air Vehicle (mUAV) may be very helpful in Wilderness Search and Rescue and many other applications but is commonly plagued with limited spatial and temporal field of views, distractive jittery motions, disorienting rotations, and noisy and distorted images. These problems collectively make it very difficult for human viewers to identify objects of interest as well as infer correct orientations throughout the video. In order to expand the temporal and spatial field of view, stabilize, and better orient users of noisy and distorted mUAV video, a method is proposed of estimating in software and in real time the relative motions of each frame to the next by tracking a small subset of features within each frame to the next. Using these relative motions, a local Euclidean mosaic of the video can be created and a curve can be fit to the video's accumulative motion path to stabilize the presentations of both the video and the local Euclidean mosaic. The increase in users' abilities to perform common search-and-rescue tasks of identifying objects of interest throughout the stabilized and locally mosaiced mUAV video is then evaluated. Finally, a discussion of remaining limitations is presented along with some possibilities for future work.

No description available.

Doctor of Philosophy / Department of Agronomy / Gary M. Pierzynski / The bioavailability of Pb and Zn is linked to the solubility of solid phases and other soil chemical characteristics, which is associated with their environmental risk, suggesting that in situ stabilization of these elements can be accomplished by influencing their chemistry. However, more research is needed to investigate the effectiveness of different soil amendments on reducing Pb and Zn bioavailability. A lab study was conducted to evaluate the effects of five different P amendments and time on Pb/Zn speciation in a contaminated soil using synchrotron-based techniques, while a field investigation studied the effects of composted beef manure on plant biomass production and the influence on microbial function, size, and community shifts. In the lab study, the Pb-phosphate mineral plumbogummite was found as an intermediate phase of pyromorphite formation, which has not been documented until now. Additionally, all fluid and granular P sources were able to induce Pb-phosphate formation, but fluid phosphoric acid (PA) was the most effective with time and distance from the treatment. However, acidity from PA increased the prescence of soluble Zn species, which can have negative environmental consequences. Granular phosphate rock (PR) and triple super phosphate (TSP) reacted to generate both Pb- and Zn-phosphates, with TSP being more effective at greater distances than PR. In the field study, compost additions of 269 Mg ha[superscript]1 significantly decreased bioavailable Zn, while increasing estimated available water, plant nutrients, and plant biomass as compared to a contaminated control and low addition of compost (45 Mg ha[superscript]1) over three years. Additionally, compost additions of 269 Mg ha[superscript]1 significantly increased microbial enzyme activities, nitrification, and microbial biomass over the contaminated control through the duration of the study. Increases in microbial activity and biomass are related to increases in total C, available water, and extractable P, while negative relationships were found with electrical conductivity and with bioavailable Zn. The addition of lime or lime plus bentonite with compost did not further reduce metal availability, increase plant biomass, or improve the size or function of microbial communities. High compost additions caused a slight shift in microbial community structure according to phospholipids fatty acid analysis. Increases in the mole percents of both Gram-positive (Gm[superscript]+) and Gram negative (Gm[superscript]-) bacteria were found depending on site. Microbial biomass of Gm[superscript]+, Gm[superscript]-, and fungi were also increased by high compost additions. Results indicate that large additions of compost are needed to increase microbial biomass, improve microbial activity, and re-establish a healthy vegetative community. This study proposes that organic matter and P amendments can be used to stabilize and reduce the bioavailability of heavy metals in soils and mine waste materials, but must be managed carefully and intelligently.

Introduction: Musculoskeletal discomfort in the neck and shoulders is common among workers performing visually demanding near work, e.g., on a computer screen, and sustained low-level muscle activity during such work can lead to work-related pain. The relationships between visual demands and muscle activity and discomfort in the neck/shoulder region are at present unclear. Aim: The aims of this thesis were to determine whether neck/shoulder discomfort and trapezius muscle activity increases during visually demanding experimental near work, and to investigate whether eye-lens accommodation is a mediating mechanism behind increased trapezius muscle activity. Methods: The four papers included are based on two experiments with different visually demanding near work tasks (duration 5 and 7 min). Trial lenses of different diopters were used to manipulate the visual demands (i.e., induce more or less accommodation) and thereby create different viewing conditions. Monocular viewing, which does not require active convergence, was used to examine the isolated effect of accommodation. Eye-lens accommodation and trapezius muscle activity were measured continuously during the visual tasks, and in one experiment the participants rated their eye and neck/shoulder discomfort at baseline and after each visual task. Results: Neck/shoulder discomfort and trapezius muscle activity increased during the visually demanding near work and participants experiencing a greater increase in eye discomfort (compared with baseline) also developed more neck/shoulder discomfort with time. There were no significant differences in muscle activity among the viewing conditions, and no effect of isolated accommodation response within the monocular viewing conditions. Conclusion: These findings indicate that accommodation per se is unlikely to mediate trapezius muscle activity. Instead, the increase in trapezius muscle activity observed here may be due to a combination of high visual attention and enhanced requirement for eye-neck (head) stabilisation. Since these results suggest that neck/shoulder discomfort may aggravate with time when the visual demands are high, it is important to provide good visual conditions in connection with visually demanding occupations. / Introduktion: Muskelrelaterade besvär i nack- och skulderområdet är vanligt förekommande, framförallt hos individer som utför synkrävande datorarbete. En orsak till sådana besvär anses vara långvarig lågintensiv aktivitet i dessa muskler. Det är i dagsläget oklart om de belastningar som synsystemet utsätts för vid synkrävande arbete bidrar till ökad muskelaktivitet i nack/skulderregionen. Syfte: Syftet var att undersöka om experimentellt synkrävande närarbete påverkar muskelaktivitet och besvär i nack/skulderregionen, och att undersöka om aktivitet i trapezius muskeln (kappmuskeln) påverkas av ögats ackommodation, d.v.s. när linsens brytkraft förändras för att se skarpt på nära håll. Metod: De fyra delstudierna baseras på två laborativa experiment där försökspersoner (66 respektive 26 stycken) genomförde olika synkrävande uppgifter (fem och sju minuter långa). För att göra synuppgifterna mer eller mindre ansträngande för synsystemet användes linser med olika grad av brytkraft (dioptrier). Dessutom, eftersom monokulärt seende inte kräver aktiv konvergens, genomfördes tre av de fyra synuppgifterna i ena experimentet med ett öga för att undersöka den enskilda effekten av ackommodation. En autorefraktor mätte ögats ackommodation under synuppgifterna och aktiviteten i trapeziusmuskeln registreades kontinuerligt med elektromyografi (EMG). I samband med det ena experimentet skattade deltagarna sina upplevda ögon- och nack/skulderbesvär, både före experimentet (baslinje) och efter varje synuppgift. Resultat: Det synkrävande arbetet ökade både de självskattade nack/skulderbesvären och muskelaktiviteten i trapezius. De personer som upplevde en högre ökning av ögonbesvär (i förhållande till baslinjen), rapporterade också mer nack/skulderbesvär över tid. Det var varken någon signifikant skillnad i grad av muskelaktivitet mellan synuppgifterna, eller något signifikant samband mellan monokulär ackommodation och muskelaktivitet. Slutsats: Resultaten indikerar att ögats ackommodation, i sig, inte påverkar muskelaktiviteten i trapezius. Ökad muskelaktivitet i nack/skulderregionen i anslutning till synkrävande arbete kan istället bero på en kombination av höga krav på visuell uppmärksamhet och ett ökat behov av att stabilisera ögonen (huvudet) i förhållande till objektet i fokus (t.ex. texten på en bildskärm). Eftersom resultaten tyder på att synkrävande närarbete leder till ökade besvär i nack/skuldraregionen över tid, är det viktigt att utforma arbetsplatser och synkrävande arbetsuppgifter (t.ex. vid datorn) på ett sätt som främjar visuell hälsa.

Thesis (MScEng (Civil Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: The research conducted in this study forms part of the Phase II process of the Bitumen Stabilized Materials (BSMs) Guideline improvement initiative. The initiative aims to address areas of concern in the cold mix design procedures for BSMs. Current road rehabilitation using the bitumen stabilization process requires testing of representative specimens as means to evaluate pavement performance over time. In order to adequately acquire specimens representative of field conditions, it is necessary to condition the materials in a process called curing. Although curing procedures have been standard in many countries on different continents, the protocols are varied and an acceptable procedure is currently not available. In order to develop an acceptable curing protocol for BSMs, both field and laboratory environments were investigated. Considering that curing takes time in the field, production of representative samples intended for laboratory testing must undergo accelerated curing in the laboratory. Given the complexities involved in achieving close correlations between field and laboratory environments, the research strived to reconcile field and laboratory material behaviour. In particular, the main objective of the research was to unify the curing protocol for BSMs, with the standardization of the curing protocol being top priority. In this study, laboratory results have confirmed that the different natures of curing mechanisms inherent in a BSM-foam and BSM-emulsion contribute to irreconcilable material behaviour(s). Results have confirmed that curing of BSM-foam is largely a function of water repulsion, with the addition of active filler dominating material performance almost immediately. Unlike BSM-foam, curing of BSM-emulsion is both a function of the breaking of emulsion during the initial phase and the gradual release of moisture with time. In this instance, BSM-emulsion material performance resembled active filler influences past the breaking of the emulsion cycle. Consequently, given the observed differences regarding material behaviour(s), the unification of the curing protocol for BSMs has not been successful. In terms of accommodation of active filler in the final curing protocol for BSMs, findings in this research have revealed that active filler’s tendency to absorb moisture in the initial stages requires longer curing time to help extract the absorbed moisture during the curing process. Although the use of active filler has an impact on curing, its inclusion in a BSM does not justify its extension in the curing time as cementation is not one of the desired properties of these materials. BSMs are primarily desirable for their flexibility in pavement structures. For this reason, active filler was omitted in the final curing protocol due to reasons of simplifying the mix design process. In conclusion, different curing protocols were tested and developed to help produce reconcilable material behaviour in both the field and laboratory environments. Through the reconciliation of key material properties such as the resilient modulus, long term equilibrium moisture conditions and shear parameters, an acceptable standardized curing protocol for BSM-foam and BSMemulsion intended for application in industrial laboratories across South Africa was successfully developed. / AFRIKAANSE OPSOMMING: Die navorsing tydens hierdie studie gedoen, vorm deel van die Tweede fase van die Bitumen Gestabiliseerde Materiale Riglyne verbeteringsinisiatief. Die inisiatief het ten doel om areas van bekommernis in die kouemengsel-ontwerp-prosedures vir Bitumen Gestabiliseerde Materiale aan te spreek. Huidige padrehabilitasie wat gebruik maak van die Bitumen Gestabiliseerde Materiale proses, vereis toetsing van verteenwoordigende monsters om sodoende plaveiselgedrag oor ‘n tydperk te evalueer. Materiale moet deur die verouderingsproses gekondisioneer word, om sodoende monsters te verkry wat akkuraat verteenwoordigend van veldtoestande is. Alhoewel verouderingsprosesse in meeste lande - op verskillende kontinente - gestandariseerd is, is die protokol verskillend en ‘n aanvaarbare prosedure is nie tans beskikbaar nie. Beide veld- en laboratoriumomgewings is ondersoek, om sodoende ‘n aanvaarbare verouderings-protokol vir Bitumen Gestabiliseerde Materiale te ontwikkel. Wanneer in ag geneem word dat veroudering in die veld tydrowend is, moet vervaardiging van verteenwoordigende monsters vir laboratoriumgebruik versnelde veroudering in die laboratoruim ondergaan. Gegee die kompleksiteite betrokke om goeie korrelasie tussen velden laboratoriumomgewings te verkry, het die navorsing daarna gestreef om die veld- en laboratoriummateriaalgedrag te verenig. Die hoofdoel van die navorsing was om die verouderingsprotokol vir Bitumen Gestabiliseerde Materiale te verenig met die stardaardisering van die verouderingsprotokol as top prioriteit. In hierdie studie het laboratorium resultate bevestig dat die verskillende aard van voorbereidings- meganismes inherent in BSM-skuim en BSM-emulsie bydra tot onversoenbare materiaalgedrag. Resultate het bevestig dat voorbereiding van BSM-skuim ’n funksie van waterrepulsie het en met die byvoeging van aktiewe vullers dominieer dit die materiaalgedrag byna onmiddelik. Anders as BSM-skuim is die voorbereiding van BSM-emulsie beide ’n funksie vir die breek van emulsie tydens die begin fase en die geleidelike vrystelling van vog oor tyd. In hierdie geval het BSM-emulsie se materiaalgedrag die invloed van aktiewe vuller getoon nadat die emulsie gebreek het. Gevolglik, weens die waargenome verskille rakende materiaalgedrag is die vereniging van die voorbereidings- protokols vir BSMs nie suksesvol nie. In terme van inagneming van aktiewe vullers in die finale voorbereidingsprotokol vir BSM’s, is deur navorsing bevind dat aktiewe vullers neig se neiging om vog te absorbeer in die beginstadia dit benodig dus ‘n langer verouderingstyd vir die ontrekking van die geabsorbeerde vog. Hoewel die gebruik van aktiewe vullers ’n impak het op die voorbereiding, reverdig dit nie die verlenging van die verouderingstyd vir die insluiting daarvan in BSM nie, siende dat sementering nie een van die gewenste eienskappe van hierdie materiaal is nie. BSMs word hoofsaaklik verkies vir sy buigsaamheid in paveiselsturkture. Om die mengselontwerp prosesse te vereenvoudig, was aktiewe vullers dus weggelaat in die finale voorbereidingsprotokol. Ter afsluiting was verskeie voorbereidings protokolle getoets en ontwikkel om te help met die vervaardiging van versoenbare materaalgedrag in beide veld-en-laboratoriumomgewings. Deur die versoening van kern materiaal eienskappe soos die elastisiteitsmodulus, lang termynewewigvog kondisies en skuifparameters, is ’n aanvaarbare gestandariseerde voorbereidingsprotokol vir BSM-skuim en BSM-emulsie bedoel vir aanwending in industriele laboratoriums regoor Suid Afrika suksesvol ontwikkel.

<p>Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility. An additional study to examine this risk has therefore also been performed.</p><p>The project started with a pilot study in order to identify the material fraction that was suitable for the experiment. When suitable material had been chosen, a column test was carried out for the purpose of studying the slurry’s influence on the mobility of metals along with the production of acidity. To clarify the organic material’s potential for complexation a pH-stat batch test was used. Drainage water samples, from the columns, were regularly taken during the experiment. These samples were analysed for pH, electrical conductivity, alkalinity, redox potential, dissolved organic carbon (DOC), sulphate and leaching metals. The effluent from the pH-stat-test were only analysed on a few occasions and only for metal content and change in DOC concentration.</p><p>The results from the laboratory experiments showed that the waste rock from Ljusnarsberg easily leached large amounts of metals. The stabilization of the waste rock succeeded in maintaining a near neutral pH in the rock waste leachate, compared to a pH 3 leachate from untreated rock waste The average concentration of copper and zinc in the leachate from untreated waste rock exceeded 100 and 1000 mg/l respectively, while these metals were detected at concentrations around 0.1 and 1 mg/l, respectively, in the leachate from the treated wastes. Examined metals had concentrations between 40 to 4000 times lower in the leachate from treated waste rock, which implies that the stabilisation with reactive amendments succeeded. The long term effects are, however, not determined. The added sludge contributed to immobilise metals at neutral pH despite a small increase in DOC concentration. The problem with adding sludge is that if pH decreases with time there is a risk of increased metal leaching.</p> / <p>Gruvavfallet från Ljusnarsbergsfältet i Kopparberg anses utgöra en stor risk för människors hälsa och den omgivande miljön. En del av varpmaterialet, ofyndigt berg som blir över vid malmbrytning, utgörs av sulfidhaltigt mineral. Då varpen exponeras för luft och nederbörd sker en oxidation av sulfiderna, vilket kan ge upphov till surt lakvatten och läckage av tungmetaller. Syftet med arbetet har varit att karaktärisera varpen och försöka stabilisera den med en blandning bestående av mesakalk och avloppsslam, samt att undersöka risken med det lösta organiska materialets förmåga att komplexbinda metaller och på så vis öka deras rörlighet.</p><p>Efter insamling av varpmaterial utfördes först en förstudie för att avgöra vilken fraktion av varpen som var lämplig för försöket. När lämpligt material valts ut utfördes kolonntest för att studera slam/kalk-blandningens inverkan på lakning av metaller, samt pH-statiskt skaktest för att bedöma komplexbildningspotentialen hos det organiska materialet vid olika pH värden. Från kolonnerna togs lakvattenprover kontinuerligt ut under försökets gång för analys med avseende på pH, konduktivitet, alkalinitet, redoxpotential, löst organiskt kol (DOC), sulfat och utlakade metaller. Lakvattnet från pH-stat-testet provtogs vid ett fåtal tillfällen och analyserades endast med avseende på metallhalter och förändring i DOC-halt.</p><p>Resultatet från den laborativa studien visade att varpmaterialet från Ljusnarsberg lätt lakades på stora mängder metaller. Den reaktiva tillsatsen lyckades uppbringa ett neutralt pH i lakvattnet från avfallet, vilket kan jämföras med lakvattnet från den obehandlade kolonnen som låg på ett pH kring 3. Medelhalten av koppar och zink översteg under försöksperioden 100 respektive 1000 mg/l i lakvattnet från det obehandlade avfallet, medan halterna i det behandlade materialets lakvatten låg kring 0,1 respektive 1 mg/l. Av de studerade metallerna låg halterna 40-4000 gånger lägre i lakvattnet från den behandlade kolonnen, vilket innebär att slam/kalk-blandningen har haft verkan. Stabiliseringens långtidseffekt är dock okänd. Det tillsatta slammet resulterade inte i någon större ökning av DOC-halten i det pH-intervall som åstadkoms med mesakalken. Utifrån pH-stat-försöket kunde det konstateras att det tillsatta slammet bidrog till metallernas immobilisering vid neutralt pH, trots en liten ökning av DOC-halten. Om en sänkning av pH skulle ske med tidens gång föreligger dock risk för ökat metalläckage.</p>

No description available.

This master thesis was performed in order to investigate arsenic stabilization in step-wise amended soil. Object of the work - soil which taken from the former wood impregnation industrial site in Forsmo, Sweden. It is contaminated with chromate-zinc-arsenate (CZA). Method of the work - three different amendments were used: zerovalent iron (Fe), fly-ash (FA) and peat (P). The test was performed in three weeks. During the first week, four mixtures (with each single additive and with all together) and blank soil was observed. During the second and third weeks test was performed step-wise adding amendments to soil+Fe mixture. Moisture was kept constant all the time. After each week extractions were made and later investigated by doing electrical conductivity, redox potential and pH tests. For elemental composition ICP-OES analysis was performed. The results of the work - the best result to stabilize arsenic were achieved by adding single iron. Stabilisation using iron, fly-ashes and peat elevated As leaching compared to non-amended soil. Step-wise amendment did not have a significant difference from single amelioration neither to arsenic, nor to other heavy metals investigated. / Darbo tikslas - įvertinti pakopinės stabilizacijos poveikį arseno bei kitų sunkiųjų metalų (SM) judrumui užterštame dirvožemyje. Darbo objektas - chromuotu cinko arsenatu užterštas dirvožemis, paimtas iš buvusios medienos apdirbimo aikštelės Forsmo vietovėje, Švedijoje. Darbo metodika - tyrimui buvo naudoti trejopi priedai: geležis (0), lakieji pelenai ir durpės. Tyrimas atliktas per tris savaites. Pirmosios savaitės metu buvo stebimi keturi dirvožemio ir jo priedų mišiniai bei kontrolinis dirvožemio mėginys. Vėliau dirvožemio ir geležies mišinys buvo pakopiniu būdu papildomas lakiaisiais pelenaisi ir durpėmis. Iš visų mišinių padarytos ištraukos ir jose matuojamas elektrinis laidumas, oksidacijos-redukcijos potencialas, pH; atlikta elementinė analizė. Darbo rezultatai - efektyviausiai arseną stabilizuoja geležis. Stabilizacija, naudojant lakiuosius pelenus ir durpes, padidino arseno išsiplovimą iš dirvožemio, lyginant su kontroliniu dirvožemio mėginiu. Pakopinė stabilizacija nebuvo efektyvesnė už vienkartinę stabilizaciją nei arseno, nei kitų tirtų sunkiųjų metalų atžvilgiu.