Numerous organisms produce ornately detailed inorganic structures (often known as shells) with features on length scales from the nanoscale to the microscale. One organism, commonly referred to as a diatom, originates from algae and is found throughout the oceans on Earth. These diatoms possess skeletal structures, frustules, made from silicon dioxide. This chemical makeup limits the number of possible applications for which these structures can be used. Using a series of gas displacement reactions, these frustules can be converted to other useful materials, such as magnesium oxide and titanium dioxide, while maintaining the features of the frustule template. In the current research, silicon dioxide frustules were converted to titanium dioxide replicas using method previously devised by our group. The titanium dioxide replicas were subjected to a hydrothermal reaction by exposing the replicas to an aqueous basic solution containing barium hydroxide to form barium titanate and barium strontium titanate replicas. The effects of reaction temperature, time, and solution composition on extent of conversion were examined. The conventional method of converting titanium dioxide to barium titanate, using a convection heating oven, was compared with a microwave assisted heating method to study the advantages of using microwave heating over convection heating.

With the digital systems moving towards higher frequencies, lower operating voltages and higher power, supplying the required current at the right voltage and at the right time to facilitate timely switching of the CMOS circuits becomes increasingly challenging. The board level power supply cannot meet these requirements directly due to the high inductance of the package interconnections. To overcome this problem, several thin film decoupling capacitors have to be placed on the IC or close to the IC in the package. Two approaches were pursued for high-k thin film decoupling capacitors. 1) Low cost sol-gel based thin film capacitors on organic board compatible Cu-foils 2) RF-sputtered thin film capacitors on silicon substrate for silicon compatible processes While sol-gel provides cost effective technology, sputtered ferroelectric devices are more compatible from manufacturing stand point with the existing technology. Nano-crystalline barium titanate and barium strontium titanate film capacitor devices were fabricated and characterized for organic and silicon substrates respectively. Sol-gel barium titanate films were fabricated first on a bare Cu-foil and then transferred to organic board through a standard lamination process. With process optimization and film doping, a capacitance density of 3 µF/cm2 was demonstrated with breakdown voltage greater than 12V. Leakage current characteristics, breakdown voltages, and electrical reliability of the devices were significantly improved through doping of the barium titanate films and modified film chemistry. Films and interfaces were characterized with high resolution electron microscopy, SEM, XRD, and DC leakage measurements. RF sputtering was selected for ferroelectric thin film integration on silicon substrate. Barium strontium titanate (BST) films were deposited on various electrodes sputtered on silicon substrates. The main focus was to improve interface stabilities for high-k thin films on Si to yield large-area defect-free devices. Effect of bottom electrode selection and barrier layers on device yield and performance were investigated carefully. High yield and high device performance was observed for certain electrode and barrier layer combination. A capacitance density up to 1 µF/cm2 was demonstrated with a breakdown voltage above 15 V on large area, 7 mm2, devices. These two techniques can potentially meet mid-high frequency future decoupling requirements.

Die Realstruktur des perowskitischen Modellsystems SrTiO3, welches in der Raumgruppe Pm-3m kristallisiert, wird durch die Sauerstoffvakanz als wichtigstem Defekt dominiert. Durch Temperaturbehandlung unter reduzierenden Bedingungen können Sauerstoffvakanzen in die Kristallstruktur eingebracht werden. Aufgrund ihrer positiven Ladung relativ zum Kristallgitter bewegen sie sich im elektrischen Feld entlang des TiO6-Oktaedernetzwerkes. Die Elektroformierung folgt dabei einem Arrheniuszusammenhang, wobei sowohl die Aktivierungsenergie als auch die Mobilität eine deutliche Abhängigkeit von der Kristallorientierung zeigen. Die Umverteilung der Sauerstoffvakanzen führt zu lokalen reversiblen Strukturänderungen, welche die Ausbildung einer neuen migrationsinduzierten feldstabilisierten polaren (MFP) Phase verursachen. In Abhängigkeit von der elektrischen Feldstärke zeichnet sie sich strukturell durch eine tetragonale Verzerrung der ursprünglich kubischen Elementarzelle aus und geht mit dem Verlust der Inversionssymmetrie einher. Die Polarisation in der Struktur wird durch die erwiesene Pyroelektrizität bestätigt und gilt als Grundlage, um anhand eines kristallographischen Symmetrieabstieges die Herleitung der Raumgruppe P4mm zu ermöglichen. Der durch die Migration hervorgerufene intrinsische Defektkonzentrationsgradient ruft eine elektromotorische Kraft hervor, deren Verwendung in einem elektrochemischen Energiespeicher experimentell nachgewiesen wurde. Diese neuen Funktionalitäten sind durch die Anwendung defektchemischer und kristallphysikalischer Konzepte infolge gezielter Materialmodifizierung unter Einfluss von Temperatur und elektrischem Feld zu verstehen. / The real structure of the perovskite-type model system SrTiO3, crystallizing in space group Pm-3m, is dominated by oxygen vacancies as most important defects. They are introduced in the crystal structure through heat-treatment under reducing conditions. Because of their positive charge relative to the crystal lattice, oxygen vacancies move in an electric field along the TiO6 octahedron network. This electroformation process follows an Arrhenius behavior. Both the activation energy and the mobility show an obvious dependence on the crystal orientation. Redistribution of oxygen defects causes local reversible structural changes, which involve the formation of a migration-induced field-stabilized polar (MFP) phase. In dependence on the electric field strength, this is structurally marked by a tetragonal distortion of the original cubic unit cell and accompanied by a loss of inversion symmetry. The polarisation in the crystal structure is confirmed by the proven pyroelectricity and serves for the argumentation to derive the space group P4mm by means of a crystallographic symmetry descent. The migration-induced intrinsic concentration gradient of oxygen vacancies leads to an electromotive force, whose application as electrochemical energy storage was proven experimentally. These new functionalities are explainable using defect chemistry and crystal physics in consequence of specific material modifications under the influence of temperature and external electric fields.

Perovskite based artificial superlattices has recently been extensively investigated due to the immense promise in various device applications. The major applications include non-volatile random access memories, microwave devices, phase shifters voltage tunable capacitor applications etc. In this thesis we have taken up the investigation of two different types of symmetric superlattices, viz. BaZrO3/BaTiO3 and SrTiO3/BaZrO3, with possible applicability to voltage tunable devices. Chapter 1 deals with the introduction to the perovskite based functional oxides. Their various applications and the specific requirements for voltage tunable device applications has also been discussed in detail. The basic properties of BaTiO3 and SrTiO3, which are well documented in the literature, have been reviewed. The fundamental physics of interfacial interactions that influence the properties of superlattices is also discussed using existing models. The reason behind the choice of constructing artificial superlattices of BaZrO3/BaTiO3 and SrTiO3/BaZrO3 and the motivation behind this thesis is outlined. Chapter 2 gives a brief description of the basic characterization techniques that has been employed for studying the thin films. These include pulsed laser deposition of oxide thin films, structural characterization using X-Ray Diffraction and Atomic Force Microscope and electrical characterization of thin film metal-insulator-metal structures. The basic principle behind the techniques has also been included in various sections of this chapter. Chapter 3 introduces the reader to basic properties of the less studied perovskite material BaZrO3, one of the parent components of Ba(Zr,Ti)O3 based ceramics for high frequency applications. BaZrO3 is the common material in both the types of superlattices studied in this thesis. Initially the growth of polycrystalline BaZrO3 on (111)Pt/TiO2/SiO2/Si has been elaborated in this chapter. After characterizing the crystalline quality of the films and optimizing the growth conditions, epitaxial BaZrO3 films has been grown on (001) SrTiO3 substates. Dielectric properties of epitaxial BaZrO3 film have been measured as a function of temperature and frequencies. The electric field tunability of BaZrO3 films has been calculated from capacitance-voltage data for comparison with superlattice structures. Chapter 4 deals with the basic considerations involving growth of artificial superlattices and multilayers using pulsed laser ablation technique. The fundamental differences between formation of multilayers and superlattices have also been discussed, and the basic considerations for optimizing growth parameters are analyzed in this chapter. X-ray θ-2θ and φ-scans have been performed to investigate crystal quality of superlattices. The growth rates calculated from the satellite reflections in X-ray θ-2θ scans indicate fair degree of control over the growth and φ-scans confirms epitaxial cube-on cube growth of both types of superlattices. Atomic Force microscopy has been used to hcaracterize the film quality and surface morphology of superlattice structures and it has been found that the films have a very smooth surface with rms roughness of the order of few nanometres. Chapter5 deals with the detailed electrical characterization of both types of superlattices structures. Dielectric response showed nearly temperature invariance for both types of superlattices. Polarization measurements show that the heterostructures are in paraelectric state. Even for paraelectric/ferroelectric BaZrO3/BaTiO3 superlattices, stress induced stabilization of the paraelectric state is exhibited in low period superlattices. Paraelectric/paraelectric-SrTiO3/BaZrO3 superlattices exhibited a tunability of ~20% at intermediate modulation periods and an extremely stable dissipation factor with respect to temperature which is very attractive for device application point of view. A maximum tunability of ~40% has been observed for lowest period BaZrO3/BaTiO3 superlattice. Relatively high Quality Factors has been observed for both type of superlattices and their dependence on the modulation periods has been analyzed. Dielectric relaxation data showed that Maxwell-Wanger type of behaviour is exhibited but the presence of a conductance component G had to be realized in the equivalent circuit representation, which originates from the observation of a square law dependence of the alternating current on the frequency. Finally DC electrical characteristics were investigated as a function of temperature to determine the type of conduction mechanism that is involoved. The data has been analyzed using existing theories of high field conduction in thin dielectric films and it has been found that at different temperature ranges, the conduction mechanism varied from bulk limited Poole-Frenkel to Space Charge limited conduction. The activation energy calculation indicate that the physical processes responsible for dielectric relaxation and dc conduction are identical.

Perovskite oxides have provided a wide variety of exotic functionalities based on their unique physical and chemical properties. By combining different perovskite oxides, interesting physical phenomena have been observed at the interfaces of perovskite heterostructures. The most interesting among these phenomena is the formation of two dimensional electron gas at the interface of two perovskite materials SrTiO3 and LaAlO3 which led to a number of fascinating physical properties such as metal-insulator transition, super-conductivity, large negative magnetoresistance and so on. This has raised the interest in exploiting the interface of various hybrids structures built on the perovskite oxide backbone. On the other hand, the two dimensional (2D) van der Waals materials such as graphene, MoS2, boron nitride etc. represent a new paradigm in the 2D electron-ics. The functionalities of these individual materials have been combined to obtain new enriched functionalities by stacking different materials together forming van der Waals heterostructures. In this work, we present a detailed study of the interface in hybrid structures made of vander Waals materials (graphene and MoS2) and their hybrids with a perovskite material namely, SrTiO3 which is known as the building block of complex oxide heterostructures. In graphene-MoS2 vertical heterostructure, we have carried out a detailed set of investigations on the modulation of the Schottky barrier at the graphene-MoS2 interface with varying external electric field. By using different stacking sequences and device structures, we obtained high mobility at large current on-off ratio at room temperature along with a tunable Schottky barrier which can be varied as high as ∼ 0.4 eV by applying electric field. We also explored the interface of graphene and SrTiO3 as well as MoS2 and SrTiO3 by electrical transport and low frequency 1/f noise measurements. We observed a hysteretic feature in the transfer characteristics of dual gated graphene and MoS2 field effect transistors on SrTiO3. The dual gated geometry enabled us to measure the effective capacitance of SrTiO3 interface which showed an enhancement indicating the possible existence of negative capacitance developed by the surface dipoles at the interface of SrTiO3 and the graphene or MoS2 channel. Our 1/f noise study and the analysis of higher order statistics of noise also support the possibility of electric field-driven reorient able surface dipoles at the interface.

Die Realstruktur des perowskitischen Modellsystems SrTiO3, welches in der Raumgruppe Pm-3m kristallisiert, wird durch die Sauerstoffvakanz als wichtigstem Defekt dominiert. Durch Temperaturbehandlung unter reduzierenden Bedingungen können Sauerstoffvakanzen in die Kristallstruktur eingebracht werden. Aufgrund ihrer positiven Ladung relativ zum Kristallgitter bewegen sie sich im elektrischen Feld entlang des TiO6-Oktaedernetzwerkes. Die Elektroformierung folgt dabei einem Arrheniuszusammenhang, wobei sowohl die Aktivierungsenergie als auch die Mobilität eine deutliche Abhängigkeit von der Kristallorientierung zeigen. Die Umverteilung der Sauerstoffvakanzen führt zu lokalen reversiblen Strukturänderungen, welche die Ausbildung einer neuen migrationsinduzierten feldstabilisierten polaren (MFP) Phase verursachen. In Abhängigkeit von der elektrischen Feldstärke zeichnet sie sich strukturell durch eine tetragonale Verzerrung der ursprünglich kubischen Elementarzelle aus und geht mit dem Verlust der Inversionssymmetrie einher. Die Polarisation in der Struktur wird durch die erwiesene Pyroelektrizität bestätigt und gilt als Grundlage, um anhand eines kristallographischen Symmetrieabstieges die Herleitung der Raumgruppe P4mm zu ermöglichen. Der durch die Migration hervorgerufene intrinsische Defektkonzentrationsgradient ruft eine elektromotorische Kraft hervor, deren Verwendung in einem elektrochemischen Energiespeicher experimentell nachgewiesen wurde. Diese neuen Funktionalitäten sind durch die Anwendung defektchemischer und kristallphysikalischer Konzepte infolge gezielter Materialmodifizierung unter Einfluss von Temperatur und elektrischem Feld zu verstehen. / The real structure of the perovskite-type model system SrTiO3, crystallizing in space group Pm-3m, is dominated by oxygen vacancies as most important defects. They are introduced in the crystal structure through heat-treatment under reducing conditions. Because of their positive charge relative to the crystal lattice, oxygen vacancies move in an electric field along the TiO6 octahedron network. This electroformation process follows an Arrhenius behavior. Both the activation energy and the mobility show an obvious dependence on the crystal orientation. Redistribution of oxygen defects causes local reversible structural changes, which involve the formation of a migration-induced field-stabilized polar (MFP) phase. In dependence on the electric field strength, this is structurally marked by a tetragonal distortion of the original cubic unit cell and accompanied by a loss of inversion symmetry. The polarisation in the crystal structure is confirmed by the proven pyroelectricity and serves for the argumentation to derive the space group P4mm by means of a crystallographic symmetry descent. The migration-induced intrinsic concentration gradient of oxygen vacancies leads to an electromotive force, whose application as electrochemical energy storage was proven experimentally. These new functionalities are explainable using defect chemistry and crystal physics in consequence of specific material modifications under the influence of temperature and external electric fields.

The advances in modern communication systems have brought about devices with more functionality, better performance, smaller size, lighter weight and lower cost. Meanwhile, the requirement for newer devices has become more demanding than ever. Tunability and flexibility are both long-desired features. Tunable devices are ‘smart’ in the sense that they can adapt to the dynamic environment or varying user demand as well as correct the minor deviations due to manufacturing fluctuations, therefore making it possible to reduce system complexity and overall cost. It is also desired that electronics be flexible to provide conformability and portability. Previously, tunable devices on flexible substrates have been realized mainly by dicing and assembling. This approach is straightforward and easy to carry out. However, it will become a “mission impossible” when it comes to assembling a large amount of rigid devices on a flexible substrate. Moreover, the operating frequency is often limited by the parasitic effect of the interconnection between the diced device and the rest of the circuit on the flexible substrate. A recent effort utilized a strain-sharing Si/SiGe/Si nanomembrane to transfer a device onto a flexible substrate. This approach works very well for silicon based devices with small dimensions, such as transistors and varactor diodes. Large-scale fabrication capability is still under investigation. A new transfer technique is proposed and studied in this research. Tunable BST (Barium Strontium Titanate) IDCs (inter-digital capacitors) are first fabricated on a silicon substrate. The devices are then transferred onto a flexible LCP (liquid crystalline polymer) substrate using iv wafer bonding of the silicon substrate to the LCP substrate, followed by silicon etching. This approach allows for monolithic fabrication so that the transferred devices can operate in millimeter wave frequency. The tunability, capacitance, Q factor and equivalent circuit are studied. The simulated and measured performances are compared. BST capacitors on LCP substrates are also compared with those on sapphire substrates to prove that this transfer process does not impair the performance. A primary study of a reflectarray antenna unit cell is also conducted for loss and phase swing performance. The BST thin film layout and bias line positions are studied in order to reduce the total loss. Transferring a full-size BST-based reflectarray antenna onto an LCP substrate is the ultimate goal, and this work is ongoing at the University of Central Florida (UCF). HFSS is used to simulate the devices and to prove the concept. All of the devices are fabricated in the clean room at UCF. Probe station measurements and waveguide measurements are performed on the capacitors and reflectarray antenna unit cells respectively. This work is the first comprehensive demonstration of this novel transfer technique.

This thesis describes investigations into the role of non-stoichiometry in the surface and bulk properties of SrTiO₃ single crystals. A family of (n×n) reconstructions, where n = 2, 3, 4, 5, 6 are produced by argon ion sputtering of the SrTiO₃ (111) single crystals and subsequent annealing in UHV or in an oxygen rich environment. The sputtering process introduces defects or oxygen vacancies in the surface region of the sample, whilst the annealing gives rise to surface reconstructions. The surface preparation conditions such as sputtering time, annealing temperature and environment are optimized to obtain various reconstructions in a controlled and reproducible manner. High resolution STM images of these reconstructions are also obtained and utilized in the investigation of the surface reactivity. Fullerene molecules are deposited on the reconstructed surfaces to elucidate the surface reactivity through template assisted growth. Fullerene molecules are first deposited with substrate surfaces held at room temperature. Being the most highly reduced among the (n×n) family, the 5×5 reconstruction significantly influenced the growth of fullerenes. Both C₆₀ and C₇₀ adsorb as individual molecules and produce clusters with magic numbers. The 4×4 and 6×6 reconstructed surfaces encourage the formation of close-packed structures upon the deposition at room temperature. When the surface covered with fullerenes is heated to a temperature of around 200 °C, epitaxial islands are observed. The 6×6 reconstructed surface appeared to be less reactive than the 4×4. Electrical transport, cathodoluminescence (CL) and electron spin resonance (ESR) experiments are also carried out to investigate the effect of oxygen vacancies on the bulk properties of UHV annealed SrTiO₃ single crystals. Thermal reduction leads to carrier doping of the material, which not only gives rise to electrical conduction but also induces room temperature luminescence. Both the electrical conductivity and CL intensity increases with annealing time. The work presented in this thesis provides insight into the defect driven properties in both the surface and bulk of SrTiO₃ single crystals, which could play an important role in the development of oxide-based electronic devices.

Communication and reconnaissance systems are requiring increasing flexibility concerning functionality and efficiency for multiband and broadband frequency applications. Circuit-based reconfiguration mechanisms continue to promote radio frequency (RF) application flexibility; however, increasing limitations have resulted in hindering performance. Therefore, the implementation of a "wireless" reconfiguration mechanism provides the required agility and amicability for microwave circuits and antennas without local overhead. The wireless reconfiguration mechanism in this thesis integrates dynamic, fluidic-based material systems to achieve electromagnetic agility and reduce the need for "wired" reconfiguration technologies. The dynamic material system component has become known as electromagnetically functionalized colloidal dispersions (EFCDs). In a microfluidic reconfiguration system, they provide electromagnetic agility by altering the colloidal volume fraction of EFCDs - their name highlights the special considerations we give to material systems in applied electromagnetics towards lowering loss and reducing system complexity. Utilizing EFCDs at the RF device-level produced the first circuit-type integration of this reconfiguration system; this is identified as the coaxial stub microfluidic impedance transformer (COSMIX). The COSMIX is a small hollowed segment of transmission line with results showing a full reactive loop (capacitive to inductive tuning) around the Smith chart over a 1.2 GHz bandwidth. A second microfluidic application demonstrates a novel antenna reconfiguration mechanism for a 3 GHz microstrip patch antenna. Results showed a 300 MHz downward frequency shift by dielectric colloidal dispersions. Magnetic material produced a 40 MHz frequency shift. The final application demonstrates the dynamically altering microfluidic system for a 3 GHz 1x2 array of linearly polarized microstrip patch antennas. The parallel microfluidic capillaries were imbedded in polydimethylsiloxane (PDMS). Both E- and H-plane designs showed a 250 MHz frequency shift by dielectric colloidal dispersions. Results showed a strong correlation between decreasing electrical length of the elements and an increase of the volume fraction, causing frequency to decrease and mutual coupling to increase. Measured, modeled, and analytical results for impedance, voltage standing wave ratio (VSWR), and radiation behavior (where applicable) are provided.

Communication and reconnaissance systems are requiring increasing flexibility concerning functionality and efficiency for multiband and broadband frequency applications. Circuit-based reconfiguration mechanisms continue to promote radio frequency (RF) application flexibility; however, increasing limitations have resulted in hindering performance. Therefore, the implementation of a "wireless" reconfiguration mechanism provides the required agility and amicability for microwave circuits and antennas without local overhead. The wireless reconfiguration mechanism in this thesis integrates dynamic, fluidic-based material systems to achieve electromagnetic agility and reduce the need for "wired" reconfiguration technologies. The dynamic material system component has become known as electromagnetically functionalized colloidal dispersions (EFCDs). In a microfluidic reconfiguration system, they provide electromagnetic agility by altering the colloidal volume fraction of EFCDs - their name highlights the special considerations we give to material systems in applied electromagnetics towards lowering loss and reducing system complexity. Utilizing EFCDs at the RF device-level produced the first circuit-type integration of this reconfiguration system; this is identified as the coaxial stub microfluidic impedance transformer (COSMIX). The COSMIX is a small hollowed segment of transmission line with results showing a full reactive loop (capacitive to inductive tuning) around the Smith chart over a 1.2 GHz bandwidth. A second microfluidic application demonstrates a novel antenna reconfiguration mechanism for a 3 GHz microstrip patch antenna. Results showed a 300 MHz downward frequency shift by dielectric colloidal dispersions. Magnetic material produced a 40 MHz frequency shift. The final application demonstrates the dynamically altering microfluidic system for a 3 GHz 1x2 array of linearly polarized microstrip patch antennas. The parallel microfluidic capillaries were imbedded in polydimethylsiloxane (PDMS). Both E- and H-plane designs showed a 250 MHz frequency shift by dielectric colloidal dispersions. Results showed a strong correlation between decreasing electrical length of the elements and an increase of the volume fraction, causing frequency to decrease and mutual coupling to increase. Measured, modeled, and analytical results for impedance, voltage standing wave ratio (VSWR), and radiation behavior (where applicable) are provided.