No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

Recently high temperature vulcanized (HTV) silicone rubber (SIR) / polymeric/composite insulators are gaining wider acceptance as overhead transmission line insulators for extra high voltage (EHV) and ultra-high voltage (UHV) systems due to some promising features like hydrophobicity recovery, light weight, ease of handling and installation, better pollution ashover performance, admirable resistance against vandalism etc. Since polymeric insula-tors are of recent origin, their long-term eld performance is yet to be understood. Owing to their organic nature, and exposure to environmental stresses like pollution, temperature, UV radiation, humidity, fog, rain etc., the insulator performance degrades over a period. The sheds/petticoats of the insulators become wettable leading to frequent ashover in humid and contaminated environment. Hence, long term reliability of the composite insulators is of foremost concern to the power utilities. The available literature on the long term eld performance of these insulators for di erent climatic conditions and under multiple environ-mental stresses for both the HTV SIR and Liquid Silicone Rubber (LSR) is scant. Also there is no reference standard for evaluation of these insulators for pollution/contamination test methods in the laboratory. However currently, CIGRE Work Group is working towards the standardization of the test methods for arti cial pollution tests for polymeric insulators. The thesis addresses some of the issues in detail. In the first part of the thesis, a new and simple pre-treatment methodology to achieve uniform contamination layer on inherently hydrophobic HTV SIR Insulator samples is presented for laboratory pollution performance evaluation. The surface water level di usion in the dipping period is found to make the insulator surface temporarily hydrophilic. Then the uniform contamination layer is applied by dipping the sample immediately in the pollution slurry. Exhaustive experiments were conducted on full scale SIR insulators as well as SIR slabs to investigate the hydrophilicity appearance on the SIR surface. A specially fabricated arrangement for assessment of Wettability Class (WC) is made as per IEC stds. The results of WC measurement and wet ashover studies support the temporary reduction in hydrophobicity of SIR due to dipping phase in the proposed pre-treatment methodology. The next part of the thesis presents the results for the effeect of long term thermal aging experimentation conducted on HTV SIR with difffeerent degrees of pollution (medium, heavy), the effeect of arid desert climate on polymeric insulators is studied. The experimental set-up consists of controlled HVAC source, temperature controlled furnace with a provision for high voltage (HV) and Leakage Current (LC) monitoring, a Digital Storage Oscilloscope (DSO), compact DAQ-9201 of National Instruments operated in LabVIEW platform etc. Two types of HTV SIR Insulators are considered for the study. Flat slabs as well as full-scale insulator samples of creepage length 725 mm are stressed simultaneously to simulate the in-service condition. The experimentation is conducted for about 575 hours with application of 21.0 kVrms at 60oC. The results of the hydrophobicity recovery for thermally aged contaminated polymeric insulators are reported. Besides, monitoring electrical and mechanical proper-ties, changes in material properties of SIR are also analyzed using Physiochemical analysis techniques like Fourier transform infrared (FTIR) spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC). Some of the key findings of the study are increased surface oxidation, surface roughness and mechanical stress due to thermal aging of polymeric insulators. Experimental investigations show that the characteristics of power frequency component of leakage current can be linked with thermal aging of SIR. Further, a unique climatic aging experimental facility is established to evaluate the long-term reliability of SIR under environmental stresses like UV, Humidity, temperature and applied electric stress. The investigations are conducted on two different types of HTV SIR and LSR at samples as well as full-scale insulator samples. The experimentation is conducted for 500 hours with 10.0 kVrms at 50oC, with 85% humidity and 1 W/m2 UV ir-radiation which is in accordance with the aging cycle specified in IEC standard. The results of the comparative studies conducted for the electrical, mechanical and material properties indicate leakage current pulses, brittleness, Salt deposition for multistress aged samples. In summary, an attempt has been made to contribute a pollution methodology with sim-ple pre-treatment technique for inherently hydrophobic HTV SIR surface to achieve better uniformity of contamination layer. Also, electro-thermal and multiple stresses investigations were conducted for long term performance on polymeric insulators.

In the present work further modifications are implemented to an existing test setup for the evaluation of the wear of cemented carbide drill buttons in rock drilling applications. The test setup has been evaluated in previous diploma works, which has shown that the test successfully mimics the wear seen in rock drilling applications. The new modifications include friction and normal force measurements together with the collection of rock debris. This has been made possible by redesigning the sample holder and by manufacturing equipment making rock debris collection possible. The new modifications to the test setup were evaluated by comparing the wear of three different cemented carbide grades tested against sandstone and granite with two different loads. The data collected from the new modifications were found to be robust with lower than expected spread of data. The coefficient of friction when testing against sandstone was higher than when testing against granite. More adhered material was observed on the wear surface when testing against granite than against sandstone. Load dependence on the wear of the cemented carbide buttons is only seen for the softer cemented carbide grades when testing against sandstone. The wear of the buttons indicates a high dependence on the hardness of the different grades as shouldbe expected. This diploma work has been performed for Sandvik Mining, Rock Tools,a world leading supplier of rock drill equipment.

Die heterogene Struktur von aus Rattenhirn isolierten Synaptischen Vesikeln wird untersucht mittels Daten aus Kleinwinkel-Röntgenstreuexperimenten unter Berücksichtigung von Daten erhalten durch cryogene Elektronenmikroskopie, dynamische Lichtstreuung und biochemische Analysen. Es werden niedrig aufgelöste Strukturmodelle des funktionellen Synaptischen Vesikels unter quasi-physiologischen Bedingungen vorgeschlagen. Details des Dichteprofils der Membran, einschließlich Beiträgen von Lipiden und Proteinen werden bestimmt. Die typische Konformation und die allgemeine laterale Organisation der Proteine in Mikrodomänen werden ermittelt. Entropische Beiträge zur freien Energie aufgrund möglicher Bildung und Auflösung der Proteinmikrodomänen auf dem Synaptischen Vesikel werden untersucht. Ferner werden zellfreie Fusionssysteme mittels dynamischer Lichtstreudaten charakterisiert und mögliche Anwendungen von Kleinwinkel-Röntgenstreuung für die Untersuchung von Membran-Fusionsprozessen erörtert.