Innan företag ska penetrera en marknad är det viktigt att de har tillräckligt med information om vilka möjligheter och hot marknaden står inför samt vilka behov företagen på marknaden har. Denna magisteruppsats syftar till att utreda framtids-utsikterna inom branscherna solenergi och vågkraft samt identifiera OEM-företagens behov inom dessa branscher. Det verktyg vi har använt för att utreda branschernas framtidsutsikter är delar av SWOT-modellen, där fokus har lagts på externa faktorer som påverkar en marknad. För att identifiera OEM-företagens behov har vi använt teorier kring OEM-marknaden och OEM-företags köpkriterier samt ABB:s egen erfarenhet och kunskap om denna marknad. För att ge en informationsrik och heltäckande bild har vi genomfört intervjuer med Energimyndigheten och OEM-företag inom branscherna solenergi och vågkraft, då de besitter kunskap om vilka möjligheter och hot branscherna står inför. Vidare har intervjuer genomförts med OEM-företagen för att få information om vilka behov företag inom dessa branscher har. Med anledning av ett ökat intresse och medvetenhet kring klimat-förändringarna har politiska målsättningar satts upp och åtgärder vidtagits för att hejda klimat-förändringarna och öka användningen av förnyelsebara energikällor. Det innebär att gynnsamma förutsättningar för förnyelsebara energikällor har skapats. Studien visar att den avgörande faktorn för fortsatt tillväxt på solenergimarknaden är olika former av ekonomiska stödsystem. Eftersom investeringsstödet i Sverige kommer att förlängas och även utökas till att omfatta privatpersoner samt att flertalet länder har ekonomiska bidrag för att stödja marknaden ser framtidsutsikten för solenergi-branschen positiv ut. Ur ett långsiktigt perspektiv krävs det dock politiskt och juridiskt stöd både nationellt och internationellt under en längre period till dess att marknaden har utvecklats till att kunna stå på egna ben. Därtill behöver tekniken och tillverknings-processerna förbättras ytterligare för att företagen ska kunna erbjuda en prisvärd och konkurrenskraftig produkt. Studien visar att på grund av att marknaden befinner sig i ett tidigt skede har OEM-företagen de primära behoven kvalitet, pris och leverans-säkerhet. När marknaden mognat kommer sannolikt andra köpkriterier som leverantörens varumärke bli av större vikt. Framtidsutsikten för branschen vågkraft är osäker eftersom vågkraftskoncept inte har etablerats kommersiellt ännu samt att det inte finns fullskaliga vågkraftskoncept som varit i drift över en längre tid. Det betyder att tekniken idag inte är tillräckligt beprövad och därmed inte kan ses som tillförlitlig. OEM-företagens främsta behov är kvalitets-komponenter, kringtjänster och hög leveranssäkerhet. Det bör även tas hänsyn till att denna marknad är i utvecklingsstadiet och därmed är i behov av leverantörer som tillhandahåller prisvärda och anpassade komponenter som OEM-företagen i dagsläget inte har tillgång till. / It is important, when penetrating a market, that companies have sufficient information about the opportunities and the threats on a market as well as the relevant needs for the purchasing companies in the market. The purpose of this master thesis is to investigate the prospects of solar and wave energy systems and identify the needs of the OEM companies within these businesses. To investigate the future market opportunities we have applied parts of the theoretical model SWOT, focusing on external elements that impact the market. The theoretical framework is based upon theories about the OEM market and used to identify the needs of the OEM companies. ABB has also contributed with their experience and knowledge of the OEM market.  We have interviewed the Swedish Energy Agency and OEM companies in the solar and wave energy business, since they have knowledge about the opportunities and threats of the markets. The information aim to give a complete and comprehensive picture of market opportunities and threats. We have also interviewed the OEM companies to receive information about their specific needs. Because the interest in and awareness of environmental change has increased, favorable political systems have been created for a continuing positive market development in renewable energy sources.  For a continuing market growth of the solar energy market, the study demonstrates the importance of financial funding. The economical funding in Sweden will be extended and involve private persons which means that the future of the market is positive. Several countries also support the market with financial funding. Due to the fact that the technology and production processes needs continuing improvement before it can manage on its own, it is important that the market get extended national and international political and legal support. The study demonstrates that OEM companies due to the fact that the market is in an early state the market have the primary needs quality, price and on-time-delivery. When the market reaches a mature level other purchasing criterions, such as the brand of the supplier, will probably be of greater importance.  Since the wave energy concepts not yet have been commercially established and that full scale wave energy concepts have been installed over sufficient time the prospects of wave energy is unsure. That means that the technology still not properly has been tested and can be seen as not yet reliable. The importance of the OEM companies is quality components, service and support and high on-time-delivery. It should be taken in consideration that the market is under development and therefore is in need of suppliers that provide customized components to the right price, which the OEM companies do not have access to today.

A relative motion based heaving point absorber wave energy converter is being co-developed by researchers at the University of Victoria and SyncWave Systems Inc. To that end---this thesis represents a multi-faceted contribution to the development effort. A small scale two-body prototype wave energy converter was developed and tested in a wave tank. Although experimental problems were encountered, the results compare reasonably well to the output of a two degree of freedom linear dynamics model in the frequency domain. A two-body wave energy converter design is parameterized as a basis for an optimization and sensitivity study undertaken to illustrate the potential benefits of frequency response tuning. Further, a mechanical system concept for frequency response tuning is presented. The two degree of freedom model is expanded to three degrees of freedom to account for the tuning system. An optimization procedure, utilizing a Sequential Quadratic Programming algorithm, is developed to establish control schedules to maximize power capture as a function of the control variables. A spectral approach is developed to estimate WEC power capture in irregular waves. Finally, as a case study, the modeling, optimization, and spectral methods are applied to predict performance for a large scale wave energy converter deployed offshore of a remote Alaskan island. Using archived sea-state data and community electrical load profiles, a wave/diesel hybrid integration with the remote Alaskan community power system is assessed to be technologically feasible.

Cette thèse porte sur le développement d'un ensemble d'outils numériques destinés à simuler différents aspects des interactions vagues-structure appliquées à l'exploitation des systèmes de récupération de l'énergie des vagues (SREV). Elle a été réalisée dans le cadre du projet ANR Monacorev (projet ANR11-MONU-018-01, 2012-2015).L'objectif est de pouvoir traiter la question des interactions à l'échelle d'une ferme de SREVs (≈ 1 km), et d'étudier l'impact d'une ou plusieurs fermes de SREVs à l'échelle régionale (≈ 10km) sur le champ de vague total. Des méthodes de modélisation et de simulation adaptées sont développées pour chacune de ces deux échelles. Jusqu'à présent, les interactions entre les SREVs étaient bien souvent étudiées en considérant que le fond était plat (l'influence d'un fond variable sur le champ de houle au niveau de la ferme étant alors jugé négligeable), ce qui permet de calculer facilement et rapidement le champ de vagues et les interactions grâce à l'utilisation de la théorie linéaire potentielle. Une application pratique de cette méthode est le calcul du rendement d'une ferme de SREVs, et l'optimisation de leurs positions relatives au sein d'un parc. Dans le cadre de la théorie linéaire, cette thèse propose une méthodologie de couplage originale entre un code de tenue à la mer (Aquaplus) et un code de propagation de la houle en zone côtière (Artemis), laquelle a été développée et qualifiée. Les simulations réalisées montrent que, pour une configuration de ferme de SREVs donnée, on ne peut pas toujours négliger les effets de la bathymétrie. Par exemple, la présence d'une plage de pente 10% au large d'une ferme de SREV peut modifier la hauteur des vagues de manière significative, et affecter ainsi le rendement de la ferme de manière significative par rapport au cas où le fond est uniformément plat. A l'échelle côtière régionale, il est aussi intéressant de simuler et prédire l'impact de fermes de SREVs sur le champ de vagues. Pour des raisons d'efficacité, une approche à phases moyennées de modélisation des vagues a été privilégiée, fondée sur le code spectral d'états de mer Tomawac. La représentation des effets d'un SREV à travers l'utilisation d'un terme puits (concept permettant de soustraire au spectre d'énergie d'état de mer local l'énergie correspondant à celle absorbée par le SREV), bien qu'incomplète du fait que les effets de radiation/diffraction ne sont pas pris en compte, a été étudiée et testée. Une nouvelle méthodologie prenant en compte ces effets dans un code spectral est présentée ici et testée, avec l'objectif de pallier à ces limitations. Les discussions sur la validité de deux approches permettent d'esquisser des pistes de développements ultérieurs pour la représentation des fermes de SREV à l'échelle régionale / This thesis focuses on the development of a set of numerical tools to simulate different aspects of the wave-body interactions applied to the exploitation of wave energy converters (WEC). It was conducted under the ANR Monacorev project (project-ANR11 MONU-018-01, 2012-2015).The objective is to address the issue of the interactions at the scale of a farm of WECs (≈ 1 km), and to study the impact of one or more WEC farms at the regional scale (≈ 10km ) on the total wave field. Modeling and simulation methods adapted for each of these two scales are developed. Until now, the interactions between WECs was often studied by considering that the bottom was flat (the influence of a variable bathymetry on the wave field at the farm site being considered to be negligible), allowing to easily and quickly calculate the wave field and interactions through the use of linear potential theory. A practical application of this method is the yield estimation for a WEC farm and the optimization of the WEC position within a park. In the framework of the linear theory, this thesis proposes an original coupling methodology between a seakeeping (Aquaplus) and a wave propagation code in coastal areas (Artemis), which was developed and qualified. Simulations show that, for a given WEC farm configuration, effects of the bathymetry cannot systematically ignored. For example, the presence of a 10% slope close to a WEC farm can significantly modify the wave height, and thus affect the performance of the farm by several percent compared to the case with a uniformly flat bottom. At the regional coastal scale, it is also interesting to simulate and predict the impact of WEC farms on the wave field. At this scale, for efficiency reasons, a phase-averaged simulation of waves was preferred, based on the sea state spectral code TOMAWAC. The representation of the effects of a WEC through the use of a sink-term (concept for subtracting the energy equivalent to that absorbed by the WEC to the sea state energy spectrum), though incomplete due to the fact that the scattering effects are not taken into account, has been studied and tested. A new methodology taking into account these effects in a spectral code is presented here and tested with the aim to overcome these limitations. Discussions on the validity of these approaches allow us to propose possible future developments for the modeling of WEC farm at the regional scale

The objective of this thesis is to develop a model that will integrate multiple buoys to a power take-off hub. The model will be derived using a time domain analysis and will consider the hydraulic coupling of the buoys and the power take-off. The derived model is reproduced in MATLAB in order to run simulations. This will give possibility to conduct a parameter study and evaluate the performance of the system. The buoy simulation model is provided by Wave4Power (W4P). It consists of a floater that is rigidly connected to a fully submerged vertical (acceleration) tube open at both ends. The tube contains a piston whose motion relative to the floater-tube system drives a power take-off mechanism. The power take-off model is provided by Ocean Harvesting Technologies AB (OHT). It comprises a mechanical gearbox and a gravity accumulator. The system is utilized to transform the irregular wave energy into a smooth electrical power output. OHT's simulation model needs to be extended with a hydraulic motor at the input shaft. There are control features in both systems, that need to be connected and synchronized with each other. Another major goal within the thesis is to test different online control techniques. A simple control strategy to optimize power capture is called sea-state tuning and it can be achieved by using a mechanical gearbox with several discrete gear ratios or with a variable displacement pump. The gear ratio of the gear box can be regulated according to a 2D look up table based on the average wave amplitude and frequency over a defined time frame. The OHT power take-off utilizes a control strategy, called spill function, to limit the excess power capture and keep the weight accumulator within a span by disengaging the input shaft from the power take-off. This is to be modified to implement power limitation with regulation of the gear ratio of the gearbox. / +46736290781

The interest in breaking the historical dependence on fossil energy and begin moving towards more renewable energy sources is rising worldwide. This is largely due to uncertainties in the future supply of fossil fuels and the rising concerns about humanity’s role in the currently ongoing climate changes. One renewable energy source is ocean waves and Uppsala University has since the early 2000s been performing active research in this area. The Uppsala wave energy concept is centered on developing linear generators coupled to point absorbing buoys, with the generator situated on the seabed and connected to the buoy on the sea surface via a steel wire. The motion of the buoy then transfers energy to the generator, where it is converted into electricity and sent to shore for delivery into the electrical grid. This thesis will mainly focus on the development and evaluation of technologies used to automate the manufacturing of the translator, a central part of the linear generator, using industrial robotics. The translator is a 3 m high and 0.8 m wide three sided structure with an aluminum pipe at its center. The structure consists of alternating layers of steel plates (pole-shoes) and ferrite magnets, with a total of 72 layers per side. To perform experiments on translator assembly and production, a robot cell (centered on an IRB6650S industrial robot) complimented with relevant tools, equipment and security measures, has been designed and constructed. The mounting of the pole-shoes on the central pipe, using the industrial robot, proved to be the most challenging task to solve. However, by implementing a precise work-piece orientation calibration system, combined with selective compliance robot tools, the task could be performed with mounting speeds of up to 50 mm/s. Although progress has been made, much work still remains before fully automated translator assembly is a reality. A secondary topic of this thesis is the development of stand-alone measurement systems to be used in the linear generator, once it has been deployed on the seabed. The main requirements of such a measurement system is robustness, resistance to electrical noise, and power efficiency. If possible the system should also be portable and easy to use. This was solved by developing a custom measurement circuit, based on industry standard 4–20 mA current signals, combined with a portable submersible logging unit. The latest iteration of the system is small enough to be deployed and retrieved by one person, and can collect data for 10 weeks before running out of batteries. Future work in this area should focus on increasing the usability of the system. The third and final topic of this thesis is a short discussion of an engineering approach to kinetic energy storage, in the form of high-speed composite flywheels, and the design of two different prototypes of such flywheels. Both designs gave important insights to the research group, but a few crucial design faults unfortunately made it impossible to evaluate the full potential of the two designs.

Cette thèse porte sur le développement d'un ensemble d'outils numériques destinés à simuler différents aspects des interactions vagues-structure appliquées à l'exploitation des systèmes de récupération de l'énergie des vagues (SREV). Elle a été réalisée dans le cadre du projet ANR Monacorev (projet ANR11-MONU-018-01, 2012-2015).L'objectif est de pouvoir traiter la question des interactions à l'échelle d'une ferme de SREVs (≈ 1 km), et d'étudier l'impact d'une ou plusieurs fermes de SREVs à l'échelle régionale (≈ 10km) sur le champ de vague total. Des méthodes de modélisation et de simulation adaptées sont développées pour chacune de ces deux échelles. Jusqu'à présent, les interactions entre les SREVs étaient bien souvent étudiées en considérant que le fond était plat (l'influence d'un fond variable sur le champ de houle au niveau de la ferme étant alors jugé négligeable), ce qui permet de calculer facilement et rapidement le champ de vagues et les interactions grâce à l'utilisation de la théorie linéaire potentielle. Une application pratique de cette méthode est le calcul du rendement d'une ferme de SREVs, et l'optimisation de leurs positions relatives au sein d'un parc. Dans le cadre de la théorie linéaire, cette thèse propose une méthodologie de couplage originale entre un code de tenue à la mer (Aquaplus) et un code de propagation de la houle en zone côtière (Artemis), laquelle a été développée et qualifiée. Les simulations réalisées montrent que, pour une configuration de ferme de SREVs donnée, on ne peut pas toujours négliger les effets de la bathymétrie. Par exemple, la présence d'une plage de pente 10% au large d'une ferme de SREV peut modifier la hauteur des vagues de manière significative, et affecter ainsi le rendement de la ferme de manière significative par rapport au cas où le fond est uniformément plat. A l'échelle côtière régionale, il est aussi intéressant de simuler et prédire l'impact de fermes de SREVs sur le champ de vagues. Pour des raisons d'efficacité, une approche à phases moyennées de modélisation des vagues a été privilégiée, fondée sur le code spectral d'états de mer Tomawac. La représentation des effets d'un SREV à travers l'utilisation d'un terme puits (concept permettant de soustraire au spectre d'énergie d'état de mer local l'énergie correspondant à celle absorbée par le SREV), bien qu'incomplète du fait que les effets de radiation/diffraction ne sont pas pris en compte, a été étudiée et testée. Une nouvelle méthodologie prenant en compte ces effets dans un code spectral est présentée ici et testée, avec l'objectif de pallier à ces limitations. Les discussions sur la validité de deux approches permettent d'esquisser des pistes de développements ultérieurs pour la représentation des fermes de SREV à l'échelle régionale / This thesis focuses on the development of a set of numerical tools to simulate different aspects of the wave-body interactions applied to the exploitation of wave energy converters (WEC). It was conducted under the ANR Monacorev project (project-ANR11 MONU-018-01, 2012-2015).The objective is to address the issue of the interactions at the scale of a farm of WECs (≈ 1 km), and to study the impact of one or more WEC farms at the regional scale (≈ 10km ) on the total wave field. Modeling and simulation methods adapted for each of these two scales are developed. Until now, the interactions between WECs was often studied by considering that the bottom was flat (the influence of a variable bathymetry on the wave field at the farm site being considered to be negligible), allowing to easily and quickly calculate the wave field and interactions through the use of linear potential theory. A practical application of this method is the yield estimation for a WEC farm and the optimization of the WEC position within a park. In the framework of the linear theory, this thesis proposes an original coupling methodology between a seakeeping (Aquaplus) and a wave propagation code in coastal areas (Artemis), which was developed and qualified. Simulations show that, for a given WEC farm configuration, effects of the bathymetry cannot systematically ignored. For example, the presence of a 10% slope close to a WEC farm can significantly modify the wave height, and thus affect the performance of the farm by several percent compared to the case with a uniformly flat bottom. At the regional coastal scale, it is also interesting to simulate and predict the impact of WEC farms on the wave field. At this scale, for efficiency reasons, a phase-averaged simulation of waves was preferred, based on the sea state spectral code TOMAWAC. The representation of the effects of a WEC through the use of a sink-term (concept for subtracting the energy equivalent to that absorbed by the WEC to the sea state energy spectrum), though incomplete due to the fact that the scattering effects are not taken into account, has been studied and tested. A new methodology taking into account these effects in a spectral code is presented here and tested with the aim to overcome these limitations. Discussions on the validity of these approaches allow us to propose possible future developments for the modeling of WEC farm at the regional scale

Le travail présenté dans cette thèse porte sur l'étude du dimensionnement d'une chaine de conversion électrique en entrainement direct d'un système direct de récupération de l'énergie des vagues (searev). Cette chaine de conversion est composée d'une génératrice synchrone à aimants permanents solidaire d'un volant pendulaire, d'un convertisseur électronique composé de deux ponts triphasés à modulation de largeur d'impulsion, l'un contrôlant la génératrice, l'autre permettant d'injecter l'énergie électrique au réseau. En complément, un système de stockage de l'énergie (batterie de supercondensateurs) est destiné au lissage de la puissance produite. Le dimensionnement de tous ces éléments constitutifs nécessite une approche d'optimisation sur cycle, dans un contexte de fort couplage multi-physique notamment entre les parties hydrodynamique et électromécanique. Dans un premier temps, l'ensemble génératrice-convertisseur, dont le rôle est d'amortir le mouvement d'un volant pendulaire interne, est optimisé en vue de minimiser le coût de production de l'énergie (coût du kWh sur la durée d'usage). Cette optimisation sur cycle est réalisée en couplage fort avec le système houlogénérateur grâce à la prise en compte conjointe de variables d'optimisation relatives à l'ensemble convertisseur-machine mais aussi à la loi d'amortissement du volant pendulaire. L'intégration d'une stratégie de défluxage, intéressante pour assurer un fonctionnement en écrêtage de la puissance, permet, dès l'étape de dimensionnement, de traiter l'interaction convertisseur-machine. Dans un second temps, la capacité énergétique du système de stockage de l'énergie fait l'objet d'une optimisation en vue de la minimisation de son coût économique sur cycle de vie. Pour ce faire, nous définissons des critères de qualité de l'énergie injectée au réseau, dont un lié au flicker, et nous comparons des stratégies de gestion de l'état de charge tout en tenant compte du vieillissement en cyclage des supercondensateurs dû à la tension et à leur température. Dans un troisième temps, à partir de données d'états de mer sur une année entière, nous proposons des dimensionnements de chaines de conversion électrique qui présentent les meilleurs compromis en termes d'énergie totale récupérée et de coût d'investissement. / The work presented in this thesis sets forth the study of the sizing of a direct-drive electrical conversion chain for a direct wave energy converter (SEAREV). This electrical chain is made up of a permanent magnet synchronous generator attached to a pendular wheel and a power-electronic converter made up of two three-phase pulse width modulation bridge, one controlling the generator, the other allowing injecting electrical energy into the grid. In addition, an energy storage system (bank of supercapacitors) is intended to smooth the power output. The sizing of all these components needs an operating cycle optimization approach, in a system context with strong multi-physics coupling, more particularly between hydrodynamical and electromechanical parts. At first, the generator-converter set, whose role is to damp the pendular movement of an internal wheel, is optimized with a view to minimize the cost of energy (kWh production cost). This optimization, based on torque-speed operating profiles, is carried out considering a strong coupling with the wave energy converter thanks to the consideration as design variables, some relatives to the generator-converter sizing but also some relatives to the damping law of the pendular wheel. In addition, the consideration of a flux-weakening strategy, interesting to ensure a constant power operation (levelling), allows, as soon as the sizing step, to deal with the generator-converter interaction. In a second step, the rated energy capacity of the energy storage system is being optimized with a view of the minimization of its economical life-cycle cost. To do this, we define quality criteria of the power output, including one related to the flicker, and we compare three energy managment rules while taking into account the power cycling aging of the supercapacitors due to the voltage and their temperature. In a third step, from yearly sea-states data, we provide sizings of the direct-drive electrical conversion chain that are the best trades-offs in terms of total electrical produced energy and economical investment cost.

Offshore renewable energy systems, such as Wave Energy Converters or an Offshore Wind Turbine, must be designed to withstand extremes of the weather environment. For this, it is crucial both to have a good understanding of the wave and wind climate at the intended offshore site, and of the system reaction and possible failures to different weather scenarios. Based on these considerations, the first objective of this thesis was to model and identify the extreme wind speed and significant wave height at an offshore site, based on measured wave and wind data. The extreme wind speeds and wave heights were characterized as return values after 10, 25, 50, and 100 years, using the Generalized Extreme Value method. Based on a literature review, fragility curves for wave and wind energy systems were identified as function of significant wave height and wind speed. For a wave energy system, a varying failure rate as function of the wave height was obtained from the fragility curves, and used to model the resilience of a wave energy farm as a function of the wave climate. The cases of non-constant and constant failure rates were compared, and it was found that the non-constant failure rate had a high impact on the wave energy farm's resilience. When a non-constant failure rate as a function of wave height was applied to the energy wave farm, the number of Wave Energy Converters available in the farm and the absorbed energy from the farm are nearly zero. The cases for non-constant and an averaged constant failure of the instantaneous non-constant failure rate as a function of wave height were also compared, and it was discovered that investigating the resilience of the wave energy farm using the averaged constant failure rate of the non-constant failure rate results in better resilience. So, based on the findings of this thesis, it is recommended that identifying and characterizing offshore extreme weather climates, having a high repair rate, and having a high threshold limit repair vessel to withstand the harsh offshore weather environment.

Previous research has displayed that multi-source farms provide an opportunity to reduce the cost of energy and improve the energy output quality. This thesis assesses the cost competitiveness of co-located wind-wave farms, specifically floating offshore wind (FLOW) turbines and CorPower’s wave energy converters (WEC). This research was conducted in collaboration with CorPower, a Swedish WEC developer. A cost model is generated, which calculates the levelized cost of energy (LCOE) utilizing a life-cycle cost analysis. The model is developed by combining CorPower’s existing cost model with an agglomeration of FLOW cost models from previous studies. An in depth literature research informs about synergies, which are translated into shared costs within the model. The cost model is applied to a site on the Northern coast of Portugal; the location of a FLOW farm project under development. Including wave energy, improves the annual energy production of the farm by up to 10%. However, the effects on power smoothing are negligible, due to the high seasonal variability of the wave resource and the minimal complementarity of the two energy sources. The LCOE of a 1GW 50% wind - 50% wave farm is 63€/MWh. The high initial investment costs of the wind farm results in the standalone wind LCOE of 73€/MWh. The strong capacity factor of the WECs cause the LCOE to reduce to 55€/MWh, when evaluating a standalone wave farm. In all co-location configurations, savings for FLOW and wave farm developers are exhibited. The highest savings are identified for small wind/wave arrays co-located in large farms. This results in an LCOE reduction of up to 4.5% for both wind and wave farm developers. The largest relative savings are found in the DEVEX costs and the electrical transmission installation costs. The identified cost calculations and savings are inline with previous studies. The savings are in the lower range compared to other studies, due to the conservative estimations of the degree of shared costs. The cost model provides a tool, that can be continuously updated with the most recent findings of cost inputs and wind-wave synergies, i.e. shared cost opportunities. This thesis’ results reflect how co-locating wind and wave farms can improve the cost-competitiveness of both technologies. Nevertheless, more in depth research is required to comprehend the full potential of co-located wind-wave farms. There is a necessity of collaboration between wind and wave industry members to ensure that the synergies and shared cost-opportunities identified, are fully exploited. / Tidigare forskning har visat att parker med flera källor ger möjlighet att minska energikostnaderna och förbättra energiproduktionens kvalitet. I den här avhandlingen utvärderas kostnadskonkurrenskraften hos samlokaliserade vind- och vågkraftsparker, särskilt flytande havsbaserade vindkraftverk (FLOW) och CorPowers vågenergiomvandlare (WEC). Denna forskning genomfördes i samarbete med CorPower, en svensk WEC-utvecklare. En kostnadsmodell genereras, som beräknar den nivellerade energikostnaden (LCOE) med hjälp av en livscykelkostnadsanalys. Modellen är utvecklad genom att kombinera CorPowers befintliga kostnadsmodell med en agglomeration av FLOW-kostnadsmodeller från tidigare studier. En djupgående litteraturstudie ger information om synergier, som översätts till delade kostnader i modellen. Kostnadsmodellen tillämpas på en plats på Portugals norra kust, där ett FLOW-anläggningsprojekt är under utveckling. Genom att inkludera vågenergi förbättras parkens årliga energiproduktion med upp till 10%. Effekterna på effektutjämningen är dock försumbara, på grund av vågresursens stora säsongsvariationer och de två energikällornas minimala komplementaritet. LCOE för en 1GW 50% vind - 50% vågkraftspark är 63€/MWh. De höga initiala investeringskostnaderna för vindkraftsparken resulterar i en LCOE för fristående vindkraft på 73 €/MWh. Den starka kapacitetsfaktorn för WECs gör att LCOE minskar till 55€/MWh, vid utvärdering av en fristående vågkraftspark. I alla samlokaliseringskonfigurationer uppvisas besparingar för FLOW och vågparksutvecklare. De största besparingarna identifieras för små vind-/vågkraftsparker som samlokaliseras i stora parker. Detta resulterar i en minskning av LCOE med upp till 4,5% för både vind- och vågparksutvecklare. De största relativa besparingarna finns i DEVEX-kostnaderna och installationskostnaderna för elektrisk överföring. De identifierade kostnadsberäkningarna och besparingarna är i linje med tidigare studier. Besparingarna ligger i det lägre intervallet jämfört med andra studier, på grund av de konservativa uppskattningarna av graden av delade kostnader. Kostnadsmodellen är ett verktyg som kontinuerligt kan uppdateras med de senaste rönen om kostnadsingångar och synergier mellan vind och våg, dvs. möjligheter till delade kostnader. Resultaten i denna avhandling visar hur samlokalisering av vind- och vågkraftsparker kan förbättra kostnadskonkurrenskraften för båda teknikerna. Det krävs dock mer djupgående forskning för att förstå den fulla potentialen hossamlokaliserade vind- och vågparker. Det finns ett behov av samarbete mellanvind- och vågkraftsindustrin för att säkerställa att de identifierade synergierna ochgemensamma kostnadsmöjligheterna utnyttjas fullt ut.

Wave ocean energy is a source of renewable energy which is gaining interest in the modern world. In contrast to other well-researched renewable energy sources such as wind energy, wave ocean energy is under the development phase. Governments around the world are encouraging the research of harnessing wave energy. As of now, there are different concepts to harness energy from waves. Tribological components are one of the main aspects that need attention in these wave energy converters. The moving components such as bearings can be the life-determining component of the entire device. This thesis provides conceptual solutions to adapt an existing start-stop bearing test rig to the conditions of wave energy converters. The test rig can test different bearing sused in the wave energy converters. The new design intends to provide scaled wave energy conditions. These conditions are mainly influenced by the oscillating movement of the bearings, the complex load condition and the salty environment. Since the testing of bearings in wave energy converters is in the initial stage, modular designs are implemented to test different types of bearings. / Se filen