This thesis has the dual purpose of raising awareness of the importance of the mixing protocol on the end products of polyelectrolyte-oppositely charged surfactant systems, and to contribute to a better understanding of the properties of bottle-brush polyelectrolytes when adsorbed onto interfaces. In the first part of this thesis work, the effects of the mixing protocol and the mixing procedure on formed polyelectrolyte-oppositely charged surfactant aggregates were investigated. It was shown that the initial properties of the aggregates were highly dependent on the mixing parameters, and that the difference between the resulting aggregates persisted for long periods of time. The second part of the studies was devoted to the surface properties of a series of bottle-brush polyelectrolytes made of charged segments and segments bearing poly(ethylene oxide) side chains; particular attention was paid to the effect of side chain to charge density ratio of the polyelectrolytes. It was shown that the adsorbed mass of the polyelectrolytes, and the corresponding number of poly(ethylene oxide) bearing segments at the interface, went through a maximum as the charge density of the polyelectrolyte was increased. Also, it was found that bottle-brush polyelectrolyte layers were desorbed quite easily when subjected to salt solutions. This observation was rationalized by the unfavourable excluded volume interactions between the side chains and the entropic penalty of confining them at an interface, which weaken the strength of the binding of the polyelectrolytes to the interface. However, it was shown that the same side chains effectively protect the adsorbed layer against desorption when the layer is exposed to solutions containing an oppositely charged surfactant. Investigation of the lubrication properties of the bottle-brush polyelectrolytes in an asymmetric (mica-silica) system also related the observed favourable frictional properties to the protective nature of the side chains. The decisive factor for achieving very low coefficients of friction was found to be the concentration of the side chains in the gap between the surfaces. Interestingly, it was shown that a brush-like conformation of the bottle-brush polyelectrolyte at the interface has little effect on achieving favourable lubrication properties. However, a brush-like conformation is vital for the resilience of the adsorbed layer against the competitive adsorption of species with a higher surface affinity. / QC 20100830

In this thesis the structure and hydration of small organic and amphipilic compounds adsorbed at the air-liquid interface, have been studied using the nonlinear optical technique Vibrational Sum Frequency Spectroscopy (VSFS). The second order nature of the sum frequency process makes this technique particularly surface sensitive and very suitable for interfacial studies, as molecules at the surface can be distinguished even in the presence of a vast excess of the same molecules in the bulk. Particular emphasis was given to the surface water structure and how it is affected by the presence of small model compounds such as acetic acid and formic acid, and also non-ionic surfactants with sugar based and ethylene oxide based polar headgroups. Understanding the structure of water at these interfaces is of considerable fundamental importance, and here VSFS provided unique information. Upon addition of tiny amounts of these surface active compounds, the ordered surface structure of water was found to be significantly perturbed, as revealed by the changes observed in the characteristic spectroscopic signature of the dangling OH bond of water molecules, which vibrate free in air and are present in the top monolayer. Dramatic differences between the different compounds were also observed in the bonded OH region, providing a valuable insight into the hydration of polar groups at interfaces. Additionally, by employing different polarization combinations of the laser beams involved in the sum frequency process, information about the different water species present at the surface and their average orientation were extracted. In particular an unusual state of water was found with a preferred orientation in a non-donor configuration in close proximity to the hydrophobic region formed by the hydrocarbon tails of the surfactant molecules. The conformation and orientation of the different adsorbates were also characterized, targeting their specific vibrational frequencies. Noteworthy is the orientation of the fluorocarbon chain of ammonium perfluorononanoate (APFN), which in contrast to the hydrocarbon chains of the other surfactant molecules studied, remained constant over a wide range of surface densities. This behaviour was also observed for the anionic headgroup of sodium dodecyl sulphate (SDS). Other interesting findings were the formation of a cyclic dimer bilayer at the surface of concentrated aqueous solutions of acetic acid and the water structuring effect induced by poly(ethylene-oxide) headgroups, in spite of being themselves disordered at the air-liquid interface.

Mixtures of chlorinated organic pollutants can be found in the soils at chlorophenol-contaminated sawmill, including (inter alia) polychlorinated phenols (CPs), phenoxyphenols (PCPPs), diphenyl ethers (PCDEs), dibenzofurans (PCDFs) and dioxins (PCDDs). These hydrophobic compounds have low water solubility and hence low mobility as truly dissolved compounds. However, they may migrate through the soil at significant rates via co-transport with dissolved organic matter (DOM) and colloids of fine, waterborne particulate matter. In the work underlying this thesis the distribution of chlorinated hydrophobic pollutants between these two mobile fractions in soil samples from five sawmill sites was studied Soils at five sites at which CPs were formerly used were characterized, and found to have complex profiles of chlorinated hydrophobic pollutants. CPs, PCPPs, PCDEs and PCDD/Fs were present at up to ppm-levels. Furthermore, the relative proportions of the pollutants differed from their relative proportions in the preservatives used at the sites, indicating that they have been transported from, and/or degraded in, the soil at different rates. These organic pollutants have low water solubility and strong affinity for soil organic matter (SOM). The importance of SOM for the fate of CPs, PCPPs, PCDEs, PCDFs and PCDDs in soil was investigated by examining the distribution of compounds between the mobile DOM and the immobile particulate organic matter (POM). The partitioning of CPs between DOM and POM was found to be approximately equal. However, the relative strength of association with POM of groups of chlorinated organic pollutants was positively correlated with their hydrophobicity, and thus increased in the order CP < PCPP < PCDE < PCDF < PCDD. Despite the weak association of PCDD/Fs with DOM our investigations found that considerable concentrations of these pollutants were bound to mobile fractions (DOM and colloids, >0.2 µm) in both a groundwater analysis and a leaching test. CPs and PCPP were present at up to ppm- and ppb-levels, respectively, and PCDEs and PCDD/Fs at up to ppt-levels. The importance of transport in association with the mobile fraction (DOM and colloids) increased with increasing hydrophobicity e.g. PCDDs were almost entirely associated with fine particulate matter, while CPs were largely found in the water phase and only minor proportions were associated with colloids.

<p>Adsorption on solid surfaces from solution is a fundamental property of a surfactant. It might even be the most important aspect of surfactant behavior, since it influences many applications, such as cleaning, detergency, dispersion, separation, flotation, and lubrication. Consequently, fundamental investigations of surfactant adsorption are relevant to many areas.</p><p>The main aim of this thesis has been to elucidate the adsorption properties, primarily on the solid/water interface, of a particular class of polyhydroxyl based surfactants: the alkyl glucosides. By the use of ellipsometry, the equilibrium and kinetic aspects of adsorption on titanium dioxide with respect to structural effects has been studied. Furthermore, the effects of small amounts of cationic surfactant additives on the adsorption on silica have been investigated. The results have been compared with similar studies for other nonionic surfactants.</p><p>We have found that the surfactant structure has a strong effect on the adsorption properties. An increase in the surfactant chain length increases the cooperativity of the system. An increase in the head group polymerization decreases the cooperativity and the plateau adsorbed amount at equilibrium. The effect of surfactant structure on the adsorption kinetics depends on the concentration relative to the cmc, while the there is a decrease in the rate of desorption with increasing hydrophobic chain length independent of the concentration. The adsorption/desorption process is concluded to be diffusion driven, as suggested by the model used. When comparing these results with studies on ethylene oxide based surfactants, we conclude that the two types of surfactants exhibit similar trends on surfaces onto which they adsorb.</p><p>Adsorption from binary surfactant solutions is even more interesting than adsorption from single surfactant solutions, since it brings us one step closer to the systems used in applications. In addition, adsorption from a mixture can be very different from adsorption from any of the single surfactants in the mixture. Alkyl glucosides alone do not adsorb on silica, but addition of small amounts of a cationic surfactant to the alkyl glucoside solution allows for adsorption on silica. A comparison between the adsorption and bulk properties has shown that mixed micellization explains most, but not all, effects of the coadsorption properties. Changing the pH in the mixed systems reveals that a surfactant with a pH-dependent charge and the ability to adapt its charge to the environment, e.g. a surface, enhances the adsorbed amount over a wider range of pH values than a purely cationic surfactant.</p><p>It is well known that alkyl glucosides and ethylene oxides adsorb differently on different types of hydrophilic surfaces. As a consequence, replacing ethylene oxides with alkyl glucosides might not be all straight-forward; however, we have shown that the effect of the surface can be eliminated by the use of a cosurfactant.</p>

<p>In this thesis the structure and hydration of small organic and amphipilic compounds adsorbed at the air-liquid interface, have been studied using the nonlinear optical technique Vibrational Sum Frequency Spectroscopy (VSFS). The second order nature of the sum frequency process makes this technique particularly surface sensitive and very suitable for interfacial studies, as molecules at the surface can be distinguished even in the presence of a vast excess of the same molecules in the bulk. Particular emphasis was given to the surface water structure and how it is affected by the presence of small model compounds such as acetic acid and formic acid, and also non-ionic surfactants with sugar based and ethylene oxide based polar headgroups. Understanding the structure of water at these interfaces is of considerable fundamental importance, and here VSFS provided unique information. Upon addition of tiny amounts of these surface active compounds, the ordered surface structure of water was found to be significantly perturbed, as revealed by the changes observed in the characteristic spectroscopic signature of the dangling OH bond of water molecules, which vibrate free in air and are present in the top monolayer. Dramatic differences between the different compounds were also observed in the bonded OH region, providing a valuable insight into the hydration of polar groups at interfaces. Additionally, by employing different polarization combinations of the laser beams involved in the sum frequency process, information about the different water species present at the surface and their average orientation were extracted. In particular an unusual state of water was found with a preferred orientation in a non-donor configuration in close proximity to the hydrophobic region formed by the hydrocarbon tails of the surfactant molecules.</p><p>The conformation and orientation of the different adsorbates were also characterized, targeting their specific vibrational frequencies. Noteworthy is the orientation of the fluorocarbon chain of ammonium perfluorononanoate (APFN), which in contrast to the hydrocarbon chains of the other surfactant molecules studied, remained constant over a wide range of surface densities. This behaviour was also observed for the anionic headgroup of sodium dodecyl sulphate (SDS). Other interesting findings were the formation of a cyclic dimer bilayer at the surface of concentrated aqueous solutions of acetic acid and the water structuring effect induced by poly(ethylene-oxide) headgroups, in spite of being themselves disordered at the air-liquid interface.</p>

Gold nanoparticles exhibit a combination of physical, chemical, optical, and electronic properties unique from all other nanotechnologies. These structures can provide a highly multifunctional platform with which to diagnose and treat diseases and can dramatically enhance a variety of photonic and electronic processes and devices. The work herein highlights some newly emerging applications of these phenomena as they relate to the targeted diagnosis and treatment of cancer, improved charge carrier generation in photovoltaic device materials, and strategies for enhanced spectrochemical analysis and detection. Chapter 1 introduces the reader to the design, synthesis, and molecular functionalization of gold nanotechnologies, and provides a framework from which to discuss the unique photophysical properties and applications of these nanoscale materials and their physiological interactions in Chapter 2. Chapter 3 discusses ongoing preclinical research in our lab investigating the use of near-infrared absorbing gold nanorods as photothermal contrast agents for laser ablation therapy of solid tumors. In Chapter 4, we present recent work developing a novel strategy for the targeted treatment of hormone-dependent breast and prostate tumors using multivalent gold nanoparticles that function as highly selective and potent endocrine receptor antagonist chemotherapeutics. In Chapter 5, we discuss a newly-emerging tumor-targeting strategy for nanoscale drug carriers which relies on their selective delivery to immune cells that exhibit high accumulation and infiltration into breast and brain tumors. Using this platform, we further investigate the interactions of nanoscale drug carriers and imaging agents to a transmembrane protein considered to be the single most prevalent and single most important contributor to drug resistance and the failure of chemotherapy. Chapter 6 presents work from a series of studies exploring enhanced charge carrier generation and relaxation in a hybrid electronic system exhibiting resonant interactions between photovoltaic device materials and plasmonic gold nanoparticles. Chapter 7 concludes by presenting studies investigating the contributions from so-called “dark” plasmon modes to the spectrochemical diagnostic method known as surface enhanced Raman scattering.

No description available.

Le contrôle de la synthèse et de l'assemblage de nanobâtonnets est un enjeu important pour l'étude de dispositifs présentant des propriétés physiques anisotropes, notamment dans le domaine de l'optique ou du magnétisme. L'objectif de cette thèse était d'étudier un système particulier, le phosphate de lanthane (LaPO4), dont on a montré qu'il peut être fabriqué sous forme de nanobâtonnets en solution jusqu'à des concentrations remarquablement élevées. Comme les cristaux liquides organiques, ces bâtonnets s'organisent spontanément en solution et leur orientation peut être contrôlée en appliquant un champ électrique. Par ailleurs, il est possible de déposer ces bâtonnets sur des substrats de verre et les couches minces obtenues présentent une remarquable biréfringence. Enfin, le dopage des bâtonnets avec des ions europium les rend luminescents, avec un signal qui dépend de l'orientation du bâtonnet. Une application originale est l'utilisation de ces nanobâtonnets comme capteurs du débit d'un liquide.

Die vorliegende Arbeit zeigt die Anwendung tomographischer und bildverarbeitender Methoden an Partikelabscheidungen in Filterschüttungen. Im betrachteten Tiefenfilter wird dabei der besonders praxisrelevante Fall abstoßender Wechselwirkung zwischen der Filterkorn-Oberfläche und Kolloid realisiert. Die durch Röntgentomographie erzeugten dreidimensionalen Bilddatensätze werden unter Zuhilfenahme eines einfachen geometrischen Modells ausgewertet, wodurch Aussagen zur lokalen Position der Kolloidabscheidungen an einem repräsentativen Filterkorn getroffen werden können. Die experimentellen Ergebnisse werden hinsichtlich der derzeit bekannten Filtertheorie diskutiert.

It is widely known that surfaces play an important role in numerous biological processes and technological applications. Thus, being able to modify surface properties provides an opportunity to control many phenomena occurring at interfaces. One way of controlling surface properties is to adsorb a polymer film onto the surface, for example through layer-by-layer (LbL) deposition of polyelectrolytes. This simple but versatile technique enables various polymers, proteins, colloidal particles etc. to be incorporated into the film, resulting in a multifunctional coating. Due to recent legislations and a consumer demand for more environmentally friendly products, we have chosen to use natural polymers (biopolymers) from renewable resources. The focus of this thesis has been on the adsorption of biopolymers and their layer-by-layer formation at solid-liquid interfaces; these processes have been studied by a wide range of techniques. The main method was the quartz crystal microbalance with dissipation monitoring (QCM-D), which measures the adsorbed mass, including trapped solvent and the viscoelastic properties of an adsorbed film. This technique was often complemented with an optical method, such as ellipsometry or dual polarization interferometry (DPI), which provided information about the “dry” polymer or protein adsorbed mass. From this combination, the solvent content and density of the layers was evaluated. In addition, the surface force apparatus (SFA), X-ray photoelectron spectroscopy (XPS), total internal reflection fluorescence (TIRF), and fluorescence resonance energy transfer (FRET) were utilized, providing further information about the film structure, chemical composition, and polymer inter-layer diffusion. Adsorption studies of the glycoprotein mucin, which has a key role in the mucousal function, showed that despite the net negative charge of mucin, it adsorbed on negatively charged substrates. The adsorbed layer was highly hydrated and the segment density on the substrate was low. We showed the importance of characterizing the mucin used, since differences in purity, such as the presence of albumin, gave rise to different adsorption behaviours in terms of both adsorbed amount and structure. The adsorbed mucin layer was to a large extent desorbed upon exposure to the anionic surfactant sodium dodecyl sulfate (SDS). In order to prevent desorption, we demonstrated that a protective layer of the cationic polysaccharide chitosan could be adsorbed onto the mucin layer and that the mucin-chitosan complexes resisted the desorption normally induced by association with SDS. Moreover, the association between chitosan and SDS was examined at the solid-liquid interface, in the bulk, and at the air-water interface. In all these environments chitosan-SDS complexes were formed and a net charge reversal of the complexes from positive to negative was observed when the concentration of SDS was increased. Furthermore, the LbL deposition method could be used to form a multilayer-like film by alternate adsorption of mucin and chitosan on silica substrates. The LbL technique was also applied to two proteins, lysozyme and β-casein with the aim of building a multilayer film consisting entirely of proteins. These proteins formed complexes at the solid-liquid interface, resulting in a proteinaceous layer, but the build-up was highly irregular with an increase in adsorbed amount per protein deposition cycle that was far less than a monolayer.Continuing with chitosan, known to have antibacterial properties we assembled multilayers with an anti-adhesive biopolymer, heparin, to evaluate the potential of this system as a coating for medical implants. Multilayers were assembled under various solution deposition conditions and the film structure and dynamics were studied in detail. The chitosan-heparin film was highly hydrated, in the range 60-80 wt-% depending on the deposition conditions. The adsorbed amount and thickness of the film increased exponential-like with the number of deposition steps, which was explained by inter-diffusion of chitosan molecules in the film during the build-up. In a novel approach, we used the distant dependent FRET technique to prove the inter-layer diffusion of fluorescent-labelled chitosan molecules within the film. The diffusion coefficient was insignificantly dependent on the deposition pH and ionic strength, and hence on the film structure. With the use of a pH sensitive dye buried under seven chitosan-heparin bilayers, we showed that the dye remained highly sensitive to the charge of the outermost layer. From complementary QCM-D data, we suggested that an increase in the energy dissipation does not necessarily indicate that the layer structure becomes less rigid. / Det är välkänt att ytor spelar en viktig roll i många biologiska processer och tekniska tillämpningar. Att kunna modifiera en ytas egenskaper ger därför en möjlighet att kunna kontrollera många fenomen som sker på ytor. Ett sätt att kontrollera ytegenskaperna är genom att adsorbera en polymerfilm på ytan, till exempel genom att växelvis adsorbera olika polyelektrolyter (LbL-teknik). Denna enkla men mångsidiga teknik möjliggör att många olika material kan införlivas i filmen, vilket resulterar i en multifunktionell beläggning. På grund av dagens lagstiftning och konsumenters ökade efterfrågan på miljövänliga material beslutade vi oss för att använda biologiska polymerer (biopolymerer) i detta projekt. Fokus i den här avhandlingen har varit på adsorption av biopolymerer och deras LbL-formation på gränsytan vätska-fast fas, där adsorptionsförloppet och det adsorberade skiktet bestående av biopolymerer studerats med en mängd olika tekniker. Huvudtekniken var kvartskristallmikrovåg med energidissipations-registrering (QCM-D), som mäter massan inklusive inkorporerat vatten, samt de viskoelastiska egenskaperna hos ett adsorberat skikt. Som komplement till denna teknik användes ofta optiska metoder, till exempel ellipsometri och ”dubbel polarisationsinterferometri (DPI)”, två tekniker som endast mäter massan av de adsorberade biopolymererna. Genom denna kombination av metoder kunde massan av inkorporerat vatten i filmen och filmens densitet bestämmas. Dessutom användes ytkraftsapparaten (SFA), röntgenfotoelektronspektrometri (XPS), och fluorescens-spektroskopiteknikerna TIRF och FRET i några undersökningar för att erhålla information om skiktens struktur, kemiska sammansättning och polymerernas diffusion inom skiktet.Adsorptionsstudier av glycoproteinet mucin, som har en central roll i funktionen av slemhinnan, avslöjade att trots att mucinet har en negativ nettoladdning adsorberade det ändå på negativt laddade substrat. Det adsorberade lagret var väldigt hydratiserat och hade en låg andel mucin i direkt kontakt med ytan. Vi påvisade vikten av att noga undersöka mucinet som användes, eftersom olika renhet, till exempel i form av förekomsten av albumin gav upphov till olika adsorptionsbeteende gällande både adsorberad mängd och struktur. En stor andel av det adsorberade mucinlagret desorberade när det exponerades för den anjoniska tensiden natriumdodecylsulfat, SDS. Vi visade att ett skyddande lager av den katjoniska polysackariden chitosan kunde adsorberas på mucinet och att mucin-chitosan-komplexen inte desorberade när SDS tillsattes. Därtill studerades växelverkan mellan chitosan och SDS på gränsytan vätska-fast fas, i bulken och på luft-vattengränsytan. Komplex av chitosan-SDS bildades i samtliga miljöer och en nettoladdningsomsvängning från positiv till negativ observerades när koncentrationen av SDS ökades.Vidare kunde LbL-tekniken nyttjas för att skapa ett multilagerlikt skikt genom att alternerande adsorbera mucin och chitosan på kiseldioxidsubstrat. Denna teknik användes även med två proteiner, lysozym och β-kasein, med målet att skapa ett multilager bestående av endast proteiner. Dessa proteiner bildade komplex på gränsytan vätska-fast fas i form av ett blandat proteinlager, men uppbyggnaden var väldigt oregelbunden med en ökning i adsorberad mängd per proteindeponeringscykel som var avsevärt mindre än ett monolager.Inom området för biomaterial utgör de antibakteriella och antihäftande egenskaperna hos chitosan respektive heparin en lovande blandning för beläggningar av medicinska implantat. Baserat på detta konstruerade vi multilagerfilmer av chitosan och heparin med olika deponeringslösningar och undersökte dynamiken och filmens struktur i detalj. Chitosan-heparin-filmen var starkt hydratiserad, bestående av cirka 60-80 vikt-% vatten beroende på deponeringsbetingelserna. Den adsorberade mängden och tjockleken på filmen ökade nästan exponentiellt med antal deponeringar, vilket förklarades med chitosanets förmåga att diffundera genom filmen under uppbyggnaden. Med ett nytt angreppssätt använde vi FRET för att bevisa diffusionen av fluorescerande färgmärkt chitosan i filmen under uppbyggnaden. Diffusionskoefficienten var i princip oberoende av pH och jonstyrka under deponeringen och följaktligen av filmens struktur. Genom att använda ett pH-känsligt färgämne begravt under sju biskikt av chitosan-heparin visade vi att färgämnet i hög grad påverkades av laddningen på det yttersta lagret. Från QCM-D-data lade vi fram teorin om att en ökning av energidissipationen för ett lager inte nödvändigtvis indikerar att lagrets struktur har blivit mindre styvt. / QC 20100729