91 |
Medidas das constantes dielétricas e deslocamento elétrico em dielétricos: desenvolvimento da técnica e metodologia / Measurements of dielectric constant and dielectric displacement: development of technique and methodologyFlávio Pandur Albuquerque Cabral 21 July 1998 (has links)
Desenvolveu-se um sistema para medir a constante dielétrica complexa de amostras dielétricas, de construção simples, versátil e de baixo custo. A medida é feita aplicando-se uma tensão senoidal e fazendo-se a aquisição do sinal aplicado e do sinal da resposta elétrica (carga elétrica). Emprega-se uma placa A/D para a aquisição de dados com taxa de amostragem de 100 Ksamples/seg e através da transformada de Fourier discreta destes sinais determina-se a impedância complexa da amostra, a partir da qual calcula-se a constante dielétrica complexa. A placa utilizada e o circuito de medida da carga elétrica introduzem defasagens indesejáveis nos sinais, cujas correções são feitas através de programa no computador usado para aquisição dos sinais. O sistema mostra um desempenho similar àqueles dos equipamentos comerciais para freqüências no intervalo de 0,1H.z a 1KHz, sendo testado com componentes resistivos e capacitivos e posteriormente em amostras de Teflon FEP, poli(fluoreto de vinilideno) e seus copolímeros com trifluoretileno. O sistema também foi utilizado para medir o deslocamento elétrico nos polímeros ferroelétricos sob a aplicação de campos elevados. Neste caso determinaram-se as curvas de histerese dielétrica e os deslocamentos de primeira, segunda e terceira ordem. / A low cost and a simple experimental system for measuring the complex dielectric constant of dielectric samples were developed. Measurements were performed measuring the electric charge response resulting from the application of a sinusoidal voltage. The system was based on an A/D acquisition board with sampling rate of 100 Ksamples/sec. The complex impedance was calculated using the discrete Fourier transform from which the complex dielectric constant was found. The phase differences introduced by the A/D board and the amplifiers circuits were connected by software. The setup showed that the results are comparable to that ones obtained with commercial impedance analyzers in the range of frequencies between 0.1 Hz and 1 KHz. Such measurements were obtained using resistors and/or capacitors and also using samples of Teflon FEP, PVDF and its copolymers with trifluorethylene. The setup was also capable to measure the electric displacement in ferroelectric polymers submitted to high fields. Hysteresis loops and the nonlinear electric displacement of first, second and third order were measured.
|
92 |
Hydraulic conductivity of saturated soil and preferred flow in samples of land confined / Condutividade hidrÃulica do solo saturado e fluxo preferencial em amostras confinadas de terraFrancisca Gleiciane da Silva 10 July 2015 (has links)
FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico / Understanding the processes related to the movement of water in soil profile is relevant to the management of soil and water resources. Hydraulic conductivity is an important soil property that affects this movement, but its determination in laboratory conditions requires that samples are contained in cylinders which can cause the presence of preferential flow through the soil wall interface. So, the goal of this work was to test the
effect of increasing perimeter and height of the sample on saturated hydraulic conductivity in confined soil samples of different textures. Soil samples were collected and the following physical analyzes were performed: particle density, particle-size, water
dispersed clay, soil porosity, and saturated hydraulic conductivity (Ko). Experimental data were analyzed in a randomized design for all variables, adopting a 4 x 5 factorial arrangement (four diameters x five heights of the cylinders), with six replications. The
Shapiro- Wilk test was used to verify the normality of the data, F test for analysis of variance, and TukeyÂs test for comparison of means (p<0.05). Classical descriptive statistics and multivariate analysis techniques were also employed. It was conclude that:
a) the results support the hypothesis that the increase of the perimeter causes an increase of the saturated hydraulic conductivity; b) for the same increase of preferential flow area, the effect on the saturated hydraulic conductivity was higher for clay soil; c) the
hypothesis that increased water path causes a change in the Ko values was rejected; d) for both soil classes increased water path did not affect the values of the saturated hydraulicconductivity. / A compreensÃo dos processos relacionados ao movimento da Ãgua no perfil do solo à relevante para o manejo do solo e dos recursos hÃdricos. A condutividade hidrÃulica à um importante atributo do solo que interfere nesse movimento, sendo que sua determinaÃÃo na condiÃÃo de laboratÃrio requer que as amostras estejam confinadas em cilindros, o que pode causar a presenÃa de fluxo preferencial pela interface solo/parede do cilindro. Objetivou-se nesse trabalho testar o efeito do aumento do perÃmetro e da altura da amostra sobre a condutividade hidrÃulica do solo saturado em amostras confinadas de terra de diferentes texturas. Foram coletadas amostras de terra para realizaÃÃo das anÃlises fÃsicas, a saber: densidade de partÃculas, granulometria, argila dispersa em Ãgua, porosidade do solo e condutividade hidrÃulica do solo saturado (Ko). Os dados experimentais foram analisados em delineamento inteiramente casualizado para todas as variÃveis, adotandose o esquema fatorial 4 x 5 (quatro diÃmetros e cinco alturas dos cilindros), com seis
repetiÃÃes. Foram aplicados os testes de Shapiro-Wilk para verificar a normalidade dos dados, o F para anÃlise de variÃncia e o de Tukey para a comparaÃÃo da mÃdias (todos a 5% de probabilidade). TambÃm foi empregada a estatÃstica descritiva clÃssica para algumas variÃveis e tÃcnicas multivariadas de anÃlises. Conclui-se que a) aceita-se a
hipÃtese de que o aumento do perÃmetro da amostra provoca aumento nos valores de condutividade hidrÃulica do solo saturado; b) para o mesmo aumento de Ãrea de fluxo preferencial, o efeito sobre a condutividade hidrÃulica do solo saturado para o solo argiloso foi maior; c) a hipÃtese de que o aumento do percurso da Ãgua causa alteraÃÃo nos valores de Ko foi refutada; d) para ambas as classes de solos o aumento do percurso da Ãgua nÃo foi determinante nos valores obtidos para condutividade hidrÃulica do solo saturado.
|
93 |
Tecnologia, emancipação e consumo na arquitetura dos anos sessenta: Constant, Archigram, Archizoom e Superstudio / Technology, emancipation and consumption in the architecture of the sixties: Constant, Archigram, Archizoom and SuperstudioRodrigo Kamimura 06 April 2010 (has links)
A presente dissertação aborda o pensamento arquitetônico europeu dos anos sessenta. Foca, particularmente, sobre a produção \"visionária\" do holandês Victor Nieuwenhuys (cujo pseudônimo era \"Constant\"), do grupo de arquitetos ingleses Archigram e dos grupos de arquitetos e designers italianos Archizoom e Superstudio. Analisa em que medida o avanço tecnológico e as novas teorias de informação/comunicação influem sobre tal arquitetura, produzindo uma hibridização entre conceitos advindos de diferentes esferas disciplinares. Avalia, como estudos de caso, alguns exemplos destas projeções: o projeto para a New Babylon, de Constant; a Plug-in City, de Archigram; o Monumento Continuo, de Superstudio; e a No-Stop City, de Archizoom; e como estas articulam a busca por emancipação social e/ou coletiva e as implicações do projeto arquitetônico com a crescente afirmação de uma sociedade de massas orientada para o consumo. Indaga, finalmente, sobre como estas propostas de cidades - ou não-cidades - ficcionais relacionam-se com as transformações sociais, políticas e econômicas em curso, quais as suas implicações em relação ao panorama histórico no qual se situam e que tipo de contribuição trazem para o debate acerca dos problemas das cidades reais. / The following thesis approaches European sixties\' architectural thinking. It focuses particularly on the \"visionary\" production of Dutch Victor Nieuwenhuys (whose pseudonym was \"Constant\"), English group of architects Archigram and Italian groups of architects and designers Archizoom and Superstudio. It analyses in which point technological advance and new information/communication theories act on such architecture, producing a hybridization among concepts coming from different disciplinary fields. It evaluates, as case studies, some examples of those projections: Constant\'s project for New Babylon; Archigram\'s Plug-in City; Superstudio\'s Continuous Monument; and Archizoom\'s No-Stop City; and how they articulate the search for social and/or individual emancipation and architectural project\'s implications with the increasing affirmation of a consumption-oriented mass society. Finally, it inquiries how these proposals of fictional cities - or non-cities - relate themselves to the ongoing social, political and economic transformations, what are their implications in relation to the historic moment where they are situated and what kind of contribution they bring to the debate over real cities.
|
94 |
Radial Versus Othogonal and Minimal Projections onto Hyperplanes in l_4^3Warner, Richard Alan 16 September 2015 (has links)
In this thesis, we study the relationship between radial projections, and orthogonal and minimal projections in l_4^3. Specifically, we calculate the norm of the maximum radial projection and we prove that the hyperplane constant, with respect to the radial projection, is not achieved by a minimal projection in this space. We will also show our numerical results, obtained using computer software, and use them to approximate the norms of the radial, orthogonal, and minimal projections in l_4^3. Specifically, we show, numerically, that the maximum minimal projection is attained for ker{1,1,1} as well as compute the norms for the maximum radial and orthogonal projections.
|
95 |
Combining Conditional Constant Propagation And Interprocedural Alias AnalysisNandakumar, K S 05 1900 (has links) (PDF)
No description available.
|
96 |
Uniform Field Distribution Using Distributed Magnetic StructureKeezhanatham Seshadri, Jayashree 13 January 2014 (has links)
Energy distribution in a conventional magnetic component is generally not at a designer's disposal. In a conventional toroidal inductor, the energy density is inversely proportional to the square of the radius. Thus, a designer would be unable to prescribe uniform field distribution to fully utilize the inductor volume for storing magnetic energy.
To address this problem a new inductor design, called a "constant-flux" inductor, is introduced in this thesis. This new inductor has the core and windings configured to distribute the magnetic flux and energy relatively uniformly throughout the core volume to achieve power density higher than that of a conventional toroidal inductor. The core of this new inductor design is made of concentric cells of magnetic material, and the windings are wound in the gaps between the cells. This structure is designed to avoid crowding of the flux, thus ensuring lower core energy losses. In addition, the windings are patterned for shorter length and larger area of cross-section to facilitate lower winding energy losses.
Based on this approach, a set of new, constant flux inductor/transformer designs has been developed. This design set is based on specific input parameters are presented in this thesis. These parameters include the required inductance, peak and rms current, frequency of operation, permissible dc resistance, material properties of the core such as relative permeability, maximum permissible magnetic flux density for the allowed core loss, and Steinmetz parameters to compute the core loss. For each constant flux inductor/transformer design, the winding loss and core loss of the magnetic components are computed. In addition, the quality factor is used as the deciding criterion for selection of an optimized inductor/transformer design.
The first design presented in this thesis shows that for the same maximum magnetic field intensity, height, total stored energy, and material, the footprint area of the new five-cell constant-flux inductor is 1.65 times less than that of an equivalent conventional toroidal inductor. The winding loss for the new inductor is at least 10% smaller, and core loss is at least 1% smaller than that in conventional inductors. For higher energy densities and taller inductors, an optimal field ratio of the dimensions of each cell (α = Rimin/Rimax) and a larger number of cells is desired. However, there is a practical difficulty in realizing this structure with a larger number of cells and higher field ratio α. To address this problem, an inductor design is presented that has a footprint area of a three-cell constant-flux inductor (α = 0.6) that is 1.48 times smaller in comparison to an equivalent conventional toroidal inductor. For the same maximum magnetic flux density, height, material, and winding loss, the energy stored in this new three-cell constant-flux inductor (α = 0.6) is four times larger than that of an equivalent conventional toroidal inductor.
Finally, new designs for application-specific toroidal inductors are presented in this thesis. First, a constant-flux inductor is designed for high-current, high-power applications. An equivalent constant-flux inductor to a commercially available inductor (E70340-010) was designed. The height of this equivalent inductor is 20% less than the commercial product with the same inductance and dc resistance. Second, a constant-flux inductor design of inductance 1.2 µH was fabricated using Micrometal-8 for the core and flat wire of 0.97 mm x 0.25 mm for the conductor. The core material of this inductor has relative permeability < 28 and maximum allowed flux density of 3600 Gauss. The dc resistance of this new, constant flux inductor was measured to be 14.4 mΩ. / Master of Science
|
97 |
Astrophysical Constraints on Fundamental Parameters in Physics and AstronomyDavis, Adam N. 29 October 2004 (has links)
No description available.
|
98 |
Derivation of the Planck and Fine-Structure Constant from Assis’s Gravity ModelTajmar, Martin 15 July 2015 (has links) (PDF)
Presently, Planck’s constant is a fundamental constant that can not be derived from other onstants. Assis developed a model based on an extended Weber-type potential energy, that allows calculating gravitational-type forces from neutral oscillating electric dipoles. Here we show that the maximum possible point-mass in his model equals the Planck mass which allows us to derive Planck’s constant and the fine-structure constant. We match the exact order of magnitude only requiring a pre-factor that is present in all Weber-type theories and has to be determined empirically. This classical model allows to link electromagnetic, gravitational and quantum properties with one approach.
|
99 |
Derivation of the Planck and Fine-Structure Constant from Assis’s Gravity ModelTajmar, Martin January 2015 (has links)
Presently, Planck’s constant is a fundamental constant that can not be derived from other onstants. Assis developed a model based on an extended Weber-type potential energy, that allows calculating gravitational-type forces from neutral oscillating electric dipoles. Here we show that the maximum possible point-mass in his model equals the Planck mass which allows us to derive Planck’s constant and the fine-structure constant. We match the exact order of magnitude only requiring a pre-factor that is present in all Weber-type theories and has to be determined empirically. This classical model allows to link electromagnetic, gravitational and quantum properties with one approach.
|
100 |
8PSK Signaling Over Non-Linear Satellite ChannelsCaballero, Rubén 10 1900 (has links)
International Telemetering Conference Proceedings / October 28-31, 1996 / Town and Country Hotel and Convention Center, San Diego, California / Space agencies are under pressure to utilize better bandwidth-efficient communication methods due to the actual allocated frequency bands becoming more congested. Budget reductions is another problem that the space agencies must deal with. This budget constraint results in simpler spacecraft carrying less communication capabilities and also the reduction in staff to capture data in the earth stations. It is then imperative that the most bandwidth efficient communication methods be utilized. This paper gives the results of a computer simulation study on 8 Level Phase Shift Keying (8PSK) modulation with respect to bandwidth, power efficiency, spurious emissions, interference susceptibility and the non-constant envelope effect through a non-linear channel. The simulations were performed on a Signal Processing Worksystem (SPW: software installed on a SUN SPARC 10 Unix Station and Hewlett Packard Model 715/100 Unix Station). This work was conducted at New Mexico State University (NMSU) in the Center for Space Telemetry and Telecommunications Systems in the Klipsch School of Electrical and Computer Engineering.
|
Page generated in 0.0506 seconds