Submitted by Lucienne Costa (lucienneferreira@ufcg.edu.br) on 2018-04-13T18:16:49Z No. of bitstreams: 1 MAURO HENRIQUE ALVES NASCIMENTO – DISSERTAÇÃO (PPGECA) 2017.pdf: 22942682 bytes, checksum: d52bbbcac224ea9695c0dd3c9ffc12d1 (MD5) / Made available in DSpace on 2018-04-13T18:16:49Z (GMT). No. of bitstreams: 1 MAURO HENRIQUE ALVES NASCIMENTO – DISSERTAÇÃO (PPGECA) 2017.pdf: 22942682 bytes, checksum: d52bbbcac224ea9695c0dd3c9ffc12d1 (MD5) Previous issue date: 2017-06-09 / Com a finalidade de sanar as degradações do pavimento, devem-se realizar estudos avaliativos das condições estruturais, objetivando identificar as possíveis causas dos defeitos e sobretudo fornecer subsídios, sobre quais medidas corretivas devem ser adotadas para a restauração das condições adequadas e aceitáveis do pavimento. Diante destas circunstâncias, o presente trabalho tem como objetivo identificar as possíveis causas das ocorrências dos defeitos parabólicos observados na superfície dos pavimentos flexíveis das pistas de pouso e decolagem e de taxiamento do Aeroporto Internacional de Natal. Para isso, realizou-se uma avaliação estrutural não destrutiva, por meio do levantamento deflectométrico com o Falling Weight Deflectometer (FWD), o qual foi realizado em toda a extensão das pistas e em diversas faixas de aquisição de dados. Com o FWD obteve-se as bacias de deflexões que possibilitaram por processo de retroanálise, por meio do software BAKFAA 2.0, caracterizar o comportamento resiliente in situ das camadas do pavimento. Com o software ELSYM5 realizou-se a análise empírico-mecanística, para verificar os níveis de tensões cisalhantes atuantes nas diversas profundidades das camadas do pavimento, inclusive na interface de ligação entre as camadas asfálticas. Também foram realizados ensaios laboratoriais de caracterização das propriedades mecânicas, tais como: módulo de resiliência, resistência a tração indireta e o ensaio de Leutner shear Test. Concluiu-se que os defeitos observados na superfície das pistas enquadravam-se na série de defeitos classificados de escorregamento do revestimento asfáltico, ou Slippage, e que os fatores que culminaram na ocorrência destes defeitos relacionam-se com a baixa aderência da interface de ligação e com a incompatibilidade de rigidez entre as camadas adjacentes de mistura asfálticas. / In order to remedy pavement degradation, evaluation studies of the structural conditions should be carried out to identify the possible causes of the defects and, above all, provide information on which corrective measures should be taken to restore adequat and acceptable conditions of the pavement. In view of these circumstances, the present work has the objective of identifying the possible causes of parabolic defects seen in the surface of the flexible pavements of the landing and take - off runways and taxiways of Natal International Airport runway. For this, a non-destructive structural evaluation was carried out by means of the deflectometric survey with the Falling Weight Deflectometer (FWD), which was carried out along the whole length of the tracks and in several ranges of data acquisition. With the FWD, the deflection basins were obtained, which enabled the BAKFAA 2.0 software to characterize the in situ resilient behavior of the pavement layers by means of a retro-analysis process. With the ELSYM5 software, the empirical-mechanistic analysis was performed to verify the levels of shear stresses at different depths of the pavement layers, including the interface between the asphalt layers. Furthermore, laboratory characterization of mechanical properties such as: resilience modulus, tensile strength and Leutner shear test were carried out. It is concluded that the defects observed on the runway surface fit into the series of defects classified as slippage of the asphalt coating, or Slippage, and that the factors that culminated in the occurrence of these defects are related to the low adhesion of the interface and With the incompatibility of stiffness between the adjacent layers of asphalt mixtures.

Submitted by Geyciane Santos (geyciane_thamires@hotmail.com) on 2015-09-30T14:23:40Z No. of bitstreams: 1 Dissertação - Washington Luiz Pinto Filho.pdf: 8211076 bytes, checksum: 5b0146ee71fe71f4ffea30a9fca0f822 (MD5) / Approved for entry into archive by Divisão de Documentação/BC Biblioteca Central (ddbc@ufam.edu.br) on 2015-10-02T20:44:54Z (GMT) No. of bitstreams: 1 Dissertação - Washington Luiz Pinto Filho.pdf: 8211076 bytes, checksum: 5b0146ee71fe71f4ffea30a9fca0f822 (MD5) / Approved for entry into archive by Divisão de Documentação/BC Biblioteca Central (ddbc@ufam.edu.br) on 2015-10-06T19:53:40Z (GMT) No. of bitstreams: 1 Dissertação - Washington Luiz Pinto Filho.pdf: 8211076 bytes, checksum: 5b0146ee71fe71f4ffea30a9fca0f822 (MD5) / Made available in DSpace on 2015-10-06T19:53:40Z (GMT). No. of bitstreams: 1 Dissertação - Washington Luiz Pinto Filho.pdf: 8211076 bytes, checksum: 5b0146ee71fe71f4ffea30a9fca0f822 (MD5) Previous issue date: 2013-11-29 / Não informada / The city of Manaus has the highest average growth rates of the fleet, according to the DENATRAN. Over the past 10 years, the fleet of cars rose from 124,840 (2003) to 297,473 cars (2013) and 3,179 buses (2003) to 7,398 buses (2013). This equates to a 138% increase. Moreover, although, according to DENATRAN in 2003, Manaus was 220,816 vehicles. In 2013, Manaus already has 551,455 registered vehicles in its municipal fleet, which equates to an increase of almost 150%. As a result of this growth, the city roads are presented with its ability to flow and dead, visually, with their decks completely deformed. In this sense, we tried to carry this research, a structural evaluation of pavements of the main streets of the town (Av. Constantino Nery, Avenida Djalma Batista, Recife Av, Av and Av Efigênio Sales Paraíba), employing the technique FWD (Falling Weight Deflectometer) in the diagnosis of the pavement structures of these pathways. The results showed that the structures of those decks still have the condition to withstand the demands of traffic load applied to them, since their structural quality obtained by the mentioned technique, presented in good condition, according to the floors they presented deflections smaller than the allowed maximum, and radii of curvature much greater than 100 m. In addition, analysis was performed of the safety of the coating with respect to tire-pavement grip, which presented values for microtexture and macrotexture well outside the ranges recommended by the standards. / A cidade de Manaus apresenta uma das maiores taxas de crescimento médio da frota de veículos, segundo dados do DENATRAN. Nos últimos 10 anos, a frota de automóveis aumentou de 124.840 (2003) para 297.473 automóveis (2013) e 3.179 ônibus (2003) para 7.398 ônibus (2013). Isto equivale a um aumento de 138 %. Ademais, ainda, segundo o DENATRAN, em 2003, Manaus tinha 220.816 veículos. Em 2013, Manaus já possui 551.455 veículos registrados na sua frota municipal, o que equivale a um aumento de quase 150 %. Como consequência deste crescimento, as vias da cidade apresentam-se com sua capacidade de fluxo inoperante e, visualmente, com seus pavimentos totalmente deformados. Neste sentido, procurou-se realizar, nesta pesquisa, uma avaliação estrutural dos pavimentos das principais vias da cidade (Av. Constantino Nery, Av. Djalma Batista, Av. Recife, Av. Paraíba e Av. Efigênio Sales), empregando a técnica FWD (Falling Weight Deflectometer) no diagnóstico das estruturas dos pavimentos das referidas vias. Os resultados obtidos mostraram que as estruturas daqueles pavimentos ainda apresentam a condição de suportar as solicitações de carga de tráfego a elas aplicadas, visto que sua qualidade estrutural, obtida pela técnica mencionada, apresentou-se em boas condições, em função dos pavimentos terem apresentado deflexões máximas inferiores às admissíveis, bem como raios de curvatura muito superiores a 100 m. Como complemento à análise estrutural, realizou-se análise das condições funcionais do revestimento com relação à aderência pneu-pavimento, a qual apresentou valores para microtextura e macrotextura bem fora dos intervalos recomendados pelas normas.

No description available.

No description available.

Analizuojama asfalto dangos konstrukcijos elgsena Lietuvos klimato sąlygomis, įvertinant temperatūros ir drėgnio, kaip vienų iš svarbiausių klimato veiksnių, įtaką kelio asfalto dangos konstrukcijos stipriui. Pateikta krintančio svorio deflektometro matavimo metodikų apžvalga kitose šalyse. Atlikta temperatūros ir drėgnio kiekvienos dienos pokyčių analizė, įvertinant jų įtaką dangos konstrukcijai. Nustatyta kelio dangos stiprio ir Eo modulio priklausomybė nuo dangos temperatūros, matuojant kelio dangos įlinkius krintančio svorio deflektometru. Kai asfalto dangos stipris matuojamas skirtingu metų laiku ar įvairiu paros metu, tai Eo modulio reikšmės turi būti redukuojamos priimtai standartinei temperatūrai. Eksperimentiniame asfalto dangų konstrukcijų ruože atliktu tyrimu patikslintas temperatūrinis redukcijos koeficientas, kuris leidžia krintančio svorio deflektometru nustatytas asfalto dangos sluoksnių Eo modulio vertes redukuoti standartinei +20 °C temperatūrai. / This final master thesis performs asphalt pavement structural behavior of the Lithuanian climate conditions, taking into account the temperature and moisture, as one of the most important climatic factors that influence the road asphalt pavement structural strength. The Falling Weight Deflectometer (FWD) measurement methods used in other countries are presented. The temperature and moisture changes in the day are analysed, evaluating their impact on pavement design. The strength of asphalt pavement layers, as well as Eo modulus values, measured using the falling weight deflectometer, strongly depend on the pavement temperature. When we use deflectometer for measuring asphalt pavement strength at different environmental conditions and in different season, the values of Eo modulus should be reduced to the assumed standard temperature. So during this research at the experimental asphalt pavement structure the temperature correction factor was revised. The use of this factor enables to adjust the Eo modulus values of asphalt pavement layers measured by the Falling Weight Deflectometer to the standard temperature of +20 °C.

The bearing capacity of a road decreases greatly during spring thaw, when the previously frozen road begins to thaw. The extent of this decrease can be evaluated by making Falling Weight Deflectomter (FWD) measurements on the road, measuring the deflection of the road when an impact load is applied to it. The bearing capacity of the road can then be evaluated by backcalculating the layer modules with backcalculation programs, or through more simple calculations based on the deflection basin indices. Both analyses were carried out in this thesis with data from FWD measurements which were carried out on county road Lv 126 in Southern Sweden during the year 2010. The temperature and moisture content of the road were monitored during the same time. The aim with the thesis was to compare the two ways of analyses, and to find out if there is some relationship between them and the measured environmental data. The results showed that the base course layer and subbase decreased in stiffness during spring thaw about 50% while the decrease in the subgrade was 20%, compared to the backcalculated summer and autumn value. The results of the simple calculations from the deflection basin indices were well comparable to the backcalculation results. By comparing the backcalculated stiffness values to the moisture content measurements it was stated that the stiffness decreased as the moisture content increased.

A relatively new method used to reduce the amount of cement-treated base (CTB) shrinkage cracking is microcracking of the CTB shortly after construction. Three portable instruments used in this study for monitoring the microcracking process include the heavy Clegg impact soil tester (CIST), portable falling-weight deflectometer (PFWD), and soil stiffness gauge (SSG). The specific objectives of this research were 1) to evaluate the sensitivity of each of the three portable instruments to microcracking, and 2) to compare measurements of CTB stiffness reduction obtained using the three devices. The test locations included in this study were Redwood Drive and Dale Avenue in Salt Lake City, Utah; 300 South in Spanish Fork, Utah; and a private access road in Wyoming. Experimental testing in the field consisted of randomized stationing at each site; sampling the CTB immediately after the cement was mixed into the reclaimed base material; compacting specimens for laboratory testing; and testing the CTB immediately after construction, immediately before microcracking, immediately after each pass of the vibratory roller during the microcracking process, and, in some instances, three days after microcracking. Several linear regression analyses were performed after data were collected using the CIST, PFWD, and SSG during the microcracking process to meet the objectives of this research. Results from the statistical analyses designed to evaluate the sensitivity of each of the three portable instruments to microcracking indicate that the PFWD and SSG are sensitive to microcracking, while the CIST is insensitive to microcracking. Results from the statistical analyses designed to compare measurements of CTB stiffness reduction demonstrate that neither of the instrument correlations involving the CIST are statistically significant. Only the correlation between the PFWD and SSG was shown to be statistically significant. Given the results of this research, engineers and contractors should utilize the PFWD or SSG for monitoring microcracking of CTB layers. The heavy CIST is unsuitable for monitoring microcracking and should not be used. For deriving target CTB stiffness reductions measured using either the PFWD or SSG from specified targets measured using the other, engineers and contractors should utilize the correlation chart developed in this research.

This thesis investigates the application of In-Situ Recycling and provides guidelines for localities to aid in the selection of recycling methods, as well as documents a local government's experience with Cold In-Place Recycling. The recycling methods discussed in this study include Cold In-Place Recycling (CIR), Hot In-Place Recycling (HIR), and Full Depth Reclamation (FDR). These methods are performed onsite and in-place in a continuous process of milling, mixing, and placement. The In-Situ Recycling guidelines include suggestions based on: traffic characteristics, existing road condition, distress types, road access, local climate, road geometry, and other road characteristics. The guidelines are based on information from sources including NCHRP Synthesis 421, American Recycling and Reclamation Association (ARRA), FHWA, and state agencies with recycling experience. This study also resulted in documenting obstacles that localities may face when in-situ recycling, as well as the impact of limited experience with recycling. The study also evaluated the construction of Cold In-Place Recycled pavement sections in Christiansburg, VA, using Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR). Additionally, using the FWD and GPR data, alternate recycled designs were proposed in addition to a cost comparison to a conventional design. / Master of Science

The structural behaviour of pavements in cold regions can considerably be affected by seasonal variation in environmental factors such as temperature and moisture content. Along with the destructive effect of heavy traffic loads, climatic and environmental factors can considerably contribute to pavement deterioration. These factors can influence the structural and functional capacity of the pavement structures which, as a result, can trigger and accelerate pavement deterioration mechanisms. Studies on the influence of variation of the environmental factors on the response and behaviour of pavement materials have shown that proper consideration to these factors must be given in realistic pavement design and analysis. In flexible pavement structures, particularly with a thin hot mix asphalt (HMA) layer, unbound materials and subgrade soil largely contribute to the overall structural behaviour of the pavement system. In unbound materials, moisture content and its variation can significantly affect pavement layer stiffness and permanent deformation characteristics. Therefore, the moisture condition of pavements and its influence on the mechanical behaviour of pavement materials has been of interest among the pavement research community. A proper understanding of moisture transformation in pavement systems and its effects on pavement performance are important for mechanistic pavement design. The present summary of this doctoral thesis is based on four main parts. The first part of the thesis covers field measurements and findings from a test section along county road 126 in southern Sweden and consists of two journal papers (paper I and II) tackling different aspects of the research topic. This test section is located in a relatively wet ground condition and consists of a thin flexible pavement structure with a deep drainage system. It is instrumented with subsurface temperature, volumetric moisture content and groundwater probes. The mechanical response of the pavement structure was investigated using Falling Weight Deflectometer (FWD) measurements. The second part of the thesis (paper III and IV) are based on laboratory experiments and investigates different recent approaches that have been proposed to apply principles of unsaturated soil mechanics for incorporating seasonal variation of moisture content into the resilient modulus models using matric suction. The third part of the thesis (paper V) builds a bridge that spans between the laboratory and field investigations with an attempt to evaluate one of the predictive models presented in Paper III. The fourth part of the thesis (paper VI) mainly focuses on the laboratory-based investigation of the permanent deformation characteristic of subgrade soils. In this part, the permanent deformation characteristics of two different silty sand subgrade soils were investigated and modelled using the data obtained from repeated load traxial tests. Paper I mainly focuses on the spring-thaw weakening of the pavement structure. The environmental data collected using different sensors and the FWD tests were used to investigate variations in moisture content with thaw penetration and its influence on the stiffness of unbound layers and the pavement’s overall bearing capacity. Using the backcalculated layer stiffness and corresponding in situ moisture measurements in the unbound layers, a degree of saturation-based moisture-stiffness model was developed for the granular material and the subgrade. In Paper II, the drainage system of the structure was manually clogged during a three month period in summer to raise the groundwater level and increase the moisture content of the layers. Along with the subsurface groundwater level and moisture content monitoring, the structural response of the pavement was studied. In this research work, the FWD tests were conducted at three different load levels. The stress dependent behaviour of the unbound granular layer and the subgrade soil were further studied using the multilevel loads FWD test data. Additionally, parameters of a nonlinear stress-dependent stiffness model were backcalculated and their sensitivity to in situ moisture content was studied. In Paper III and IV, series of suction-controlled repeated load triaxial (RLT) tests were conducted on two silty sand (SM) subgrade materials. Several resilient modulus prediction models that account for seasonal moisture content variation through matric suction were summarized and after optimizing the model parameters, the capability of the prediction models in capturing the material response were evaluated. In Paper V, an attempt was made to evaluate the proficiency of one of the suction-resilient modulus models using the field moisture content and FWD measurements from the Torpsbruk test site. The backcalculated subgrade stiffness dataset at different moisture contents were compared with resilient modulus models obtained from the suction-resilient modulus predictive model. Paper VI presents an evaluation of several permanent deformation models for unbound pavement materials that incorporate the time-hardening concept using a series of multistage repeated load triaxial (RLT) tests conducted on silty sand subgrade materials. The permanent deformation tests were conducted at four different moisture contents with pore suctions measurement throughout the test. The effect of moisture content (matric suction) on the permanent deformation characteristics of the materials and the predictive model parameters were further investigated. / <p>QC 20150324</p>

The first objective of this research was to investigate temporal trends in the mechanical properties of base materials stabilized with asphalt emulsion and to assess the rate at which emulsion-treated base (ETB) design properties are achieved. The second objective of this research was to identify construction and environmental factors most correlated to specific mechanical properties of ETB layers and to determine which construction factors exhibit the greatest variability. Additional statistical analysis was performed to determine if significant differences existed between different test sections on a given project. In this research, three experimental sections were established along a pavement reconstruction project near Saratoga Springs, Utah. Field tests were performed to assess the structural properties of the ETB immediately following construction and at 2, 3, 7, and 14 days; 4 months; and 1 year. Measured values were plotted against time to determine trends in ETB strength development. Several statistical analyses were then performed on the collected data. Modulus values were consistently low in all three sections during the first two weeks of testing, increased dramatically by 4 months, and then decreased considerably by 1 year. During the first two weeks following construction, the average ETB structural coefficient was 0.04. Only two of the three sections reached the design structural coefficient of 0.25, which occurred after approximately 3 months; however, the average structural coefficient measured for all three sections after 1 year of curing, which included a winter, was only 47 percent of the design strength. The results of this research show that, while pavement capacity is sufficient at 4 months, it is severely reduced during the first two weeks and at 1 year. Trafficking under these reduced capacities is not recommended. Statistical analysis showed that gradation, binder change during emulsion treatment, and moisture content have the most significant impact on ETB structural properties. Gradation and binder change during emulsion treatment also exhibited significant variability; tighter specifications on material gradations and improved uniformity in emulsion distribution should therefore be considered. Because of the negative impacts of moisture on ETB strength development, construction should not be performed in conditions of excess moisture.