The master thesis deals with the influence of a local change of temperature due to advection from disc brake to axial velocity field close to the rotating wheel of a car. The second goal is to set parameters applicable to various wheel discs and study of the influence of these parameters to aerodynamical properties of car and thermodynamical properties of the disc brake. The thesis is numerically executed in StarCCM+. The first part focuses on theoretical background about the numerical solution and current status of research. There are described disc parameters, geometry input and solver settings in the second part. The final part deals with a comparison of velocity fields for isothermal and thermodynamical model and evaluates the influence of parameters to velocity field, aerodynamical drag and thermodynamical performance of the brake.

V této diplomové práci byla provedena série numerických výpočtů proudění kolem křídla s aktivním řízením proudu. Výpočty jsou provedeny pro různé úhly náběhu křídla s profilem NACA 0015. Křídlo s zařízením pro aktivní řízení proudu bylo testováno v podmínkách s Machovým číslem M=0,21 a Re= 2500000. Bylo zkoušeno více možných konfigurací s cílem nalézt nejúčinější variantu, která bude zároveň stále energeticky efektivní. Vybraný přístup k aplikaci aktivního řízení na křídle se od ostatních liší. Použito je velkých ploch pro vyfukování vzduchu o nízké rychlosti a zároveň v souvislosti s tím je studována energetická účinnost. Snížení odporu a zvýšení vztlaku je dosaženo změnou řídících veličin. Při určitých specifických podmínkách je zařízení schopno při velmi vysoké energetické účinnosti dosáhnout pro všechny úhly náběhu výrazného snížení odporu, zvýšení vztlaku křídla, nebo obojího zároveň. Maximální pokles odporu křídla na malých úhlech náběhu přesahuje 40% z celkového odporu křídla a stále s dodržením energetické účinnosti.

The object of the diploma thesis is a conceptual layout of two-seater metal ultralight aircraft which has simple construction and with respect to low price. The preamble of the work deals with concept, layout and technology of aircraft. As next part are solved an aerodynamic characteristics, a determinative of centre of gravity position and a performance. Last of all is strength of wing.

The aim of the master’s thesis is an investigation of volume mesh quality, turbulent models and models of rotation and their influence on aerodynamic coefficients of rotating wheels. Mesh independence study and near-wall prism layer modelling are also of high importance. Subsequently, the appropriate turbulent model is used for research of wheel rotation on drag and lift on a front and rear axle of the vehicle compared to the stationary case.

This master thesis is focused on aerodynamic design of transonic glider, which is assigned for following an airliner at cruising regime of flight. Main goal of the thesis is to determine basic geometrical design of airplane with respect to Whitcomb aera rule, mass analysis and drag polar. Weight analysis includes determining center of gravity according to longitudinal static stability margin. The drag polar of the airplane is determine for cruising regime of flight, that means the regime of following an airliner.

Tématem diplomové práce je koncepční studie lehkého dvoumotorového letounu. Je provedeno srovnání současných letounů, jejich motorů, technický popis navrhovaného řešení, hmotový rozbor, výpočet aerostatických podkladů, výpočet obálky zatížení, nákladů na vývoj a základní konstrukce hlavních součástí.

This diploma thesis deals with modeling and CFD calculation of aerodynamic characteristics of vehicle, influenced by loaded or unloaded tires and boundary conditions applied on this tires. These calculations are combined with three types of variable rear body shape of DrivAer vehicle. There is a complete analysis and evaluation of the effects of these factors.

This essay aims to study the Swedish suffrage movement, LKPR from an emotional historical perspective. How did the activists in the early 1900s relate to emotions, in a time in which women were described as “too emotional” to participate on the public stage? What do the emotions that got expressed actually mean and how could this affect the practical actions of the organisation? Do the activists share an emotional language, simply because they share the same restrictions and goals in life? The study will be formed as a discourse analysis, which will show us the importance of understanding that language and practical actions are interrelated. In time, we will see how the Swedish organisation actually used quite an aggressive rhetorical language, which differs from their practical actions. They used words such as unworthy, threatening, guiltand shame, belligerent, etc. And I came to realize just how willing and well the organisation and the actors within this compound actually adapted their language and the emotions that they described depending on the social, religious and political context that they found themselves to be in. The LKPR:s own journal very rarely held back emotions in any way, while actors within the organization that also wrote in other journals adapted to the preconceptions that could be found within those surroundings and readers. And based on this fact, the language of the LKPR:s actors and journal differs quite a lot from other common newspapers that were published at the same time and that discussed the same kind of issues. I would not hesitate tosay that the language of the LKPR actually does remind quite a lot about the english suffragettś rethorics, and therefore, I will argue, that further studies would gain from studying the relationship between the swedish activists and the english suffragettes, how this relationship affected the language and emotions and the practical actions.

This thesis is motivated by the application of active flow control on the cabin of trucks, thereby providing a new means of drag reduction. Particularly, the work presented strives to identify how plasma actuators can be used to reduce the drag caused by the detachment of the flow around the A-pillars. This is achieved by conducting numerical simulations, and is part of a larger project that also includes experimental. The effect of plasma actuators is modeled through a body force, which adds very little computational cost and is suitable for implementation in most CFD solvers. The spatial distribution of this force is described by coefficients which have been optimized against experimental data, and the model was shown to be able to accurately reproduce the wall jet created by a single plasma actuator in a no-flow condition. A half cylinder geometry - a simplified geometry for the A-pillar of a truck - was used in a preliminary Large Eddy Simulation (LES) study that showed that the actuator alone, operated continuously, was not sufficient to achieve a significant reduction of the drag. Nevertheless, a significant drag reduction was obtained by simply increasing the strength of the body force to a higher value, showing that this type of actuation remains relevant for the reduction of drag. In the course of finding ways to improve the efficiency of the actuator, dynamic mode decomposition was investigated as a post-processing tool to extract structures in the flow. Such structures are identified by their spatial location and frequency, and might help to understand how the actuator should be used to maximize drag reduction. Thus a parallel code for dynamic mode decomposition was developed in order to facilitate the treatment of the large amounts of data obtained by LES. This code and LES itself were thereafter evaluated in the case of a pulsating channel flow. By using the dynamic mode decomposition it was possible to accurately extract oscillating profiles at the forcing frequency, although harmonics with lower amplitude compared to the turbulence intensity could not be obtained. / Denna avhandling behandlar tillämpningen av aktiv strömningskontroll för lastbilshytter, vilket är en ny metod för minskning av luftmotståndet. Mer i detalj är det övergripande målet att visa på hur plasmaaktuatorer kan användas för att minska luftmotståndet orsakat av avlösningen runt A-stolparna. In denna avhandling studeras detta genom numeriska simuleringar. Arbetet är en del av ett projekt där även experimentella försök görs. Effekten av plasmaaktuatorer modelleras genom en masskraft, vilket inte ger nämnvärd ökning av beräkningstiden och är lämplig för implementering i de flesta CFD-lösare. Den rumsliga fördelningen av kraften bestäms av koefficienter vilka i detta arbete beräknades utifrån experimentella data. Modellen har visat sig kunna återskapa en stråle nära väggen med god noggrannhet av en enskild plasmaaktuator för en halvcylinder utan strömning. Samma geometri - en halvcylinder som här används som förenklad geometri av A-stolpen på en lastbil - användes i en preliminär LES studie som visade att enbart aktuatorn vid kontinuerlig drift inte var tillräckligt för att uppnå en signifikant minskning av luftmotståndet. En signifikant minskning av luftmotståndet erhölls genom att helt enkelt öka styrkan på kraften, vilket visats att denna typ av strömningskontroll är relevant för minskning av luftmotståndet. I syfte att förbättra effektiviteten hos aktuatorn, studerades dynamic mode decomposition, som ett verktyg för efterbehandling för att få fram flödesstrukturer. Dessa strukturer identifieras genom deras rumsupplösning och frekvens och kan hjälpa till att förstå hur aktuatorerna bör användas för att minska luftmotståndet. En parallelliserad kod för dynamic mode decomposition utvecklades för att underlätta efterbehandlingen av de stora datamängder som fås från LES-beräkningarna. Slutligen, utvärderades denna kod och LES-beräkningar på ett strömningsfall med pulserande kanalflöde. Metoden, dynamic mode decomposition, visade sig kunna extrahera de oscillerande flödesprofilerna med hög noggrannhet för den påtvingade frekvensen. Övertoner med lägre amplitud jämfört med turbulensintensiteten kunde dock inte erhållas. / <p>QC 20150312</p>

The aim of this master thesis is to characterize the fluid forces applied to a fuel assembly inthe core of a nuclear power plant in case of seism. The forces are studied with a simplifiedtwo-dimensional model constituted of an array of 3 by 3 infinite cylinders oscillating in aclosed box. The axial flow of water, which convects the heat in the core of a nuclear powerplant, is also taken into account. The velocity of the axial flow reaches 4m/s in the middle ofthe assembly and modifies the forces features when the cylinders move laterally.The seism is modeled as a lateral displacement with high amplitude (several cylinderdiameters) and low frequencies (below 20 Hz). In order to study the effects of the amplitudeand of the frequency of the displacement, the displacement taken is a sine function withboth controlled amplitude and frequency. Four degrees of freedom of the system will bestudied: the amplitude of the displacement, its frequency, the axial velocity amplitude andthe confinement (due to the closed box).The fluid forces exerted on the cylinders can be seen as a combination of three terms: anadded mass, related to the acceleration of cylinders, a drift force, related to the damping ofthe fluid and a force due to the interaction of the cylinder with residual vortices. The firsttwo components will be characterized through the Morison expansion, and their evolutionwith the variation of the degree of freedom of the system will be quantified. The effect ofthe interaction with the residual vortices will be observed in the plots of the forces vs. timebut also in the velocity and vorticity map of the fluid.The fluid forces are calculated with the CFD code Code_Saturne, which uses a second orderaccurate finite volume method. Unsteady Reynolds Averaged Navier Stokes simulations arerealized with a k-epsilon turbulence model. The Arbitrary Lagrange Euler model is used todescribe the structure displacement. The domain is meshed with hexahedra with thesoftware gmsh [1] and the flow is visualized with Paraview [2]. The modeling techniquesused for the simulations are described in the first part of this master thesis.