Spelling suggestions: "subject:"forcevelocity"" "subject:"lowervelocity""
1 |
Two-point vertical force-velocity profile with model predicted maximal theoretical forceLipsius, Lauren 13 October 2021 (has links)
Vertical jump performance is a key component of sporting success. In order to improve jump height, athletic assessments using constrained vertical jumps have been created to inform training decisions. The vertical force-velocity (FV) profile is a protocol that involves an athlete performing a series of squat jumps with multiple loads to create an athlete profile that is used to assess lower limb strength and speed performance and provide training recommendations. Yet, some practitioners avoid force-velocity profiling having expressed concerns about athlete safety during heavily loaded jumps, or the time cost of testing. As a simpler, faster and safer assessment, an unloaded squat jump, and a maximal voluntary isometric mid-thigh pull (IMTP) have been used to provide general training recommendations. These basic tasks have yet to provide the array of FV profile metrics or the accuracy of the training recommendations developed from the standard vertical FV profile protocol. Fortunately, due to the similarity of these IMTP and jump task metrics and the standard FV profile it may be possible to predict the same vertical FV metrics and training recommendations using multiple athlete measures, that include IMTP and jump task metrics and predictive modeling. Therefore, the purpose of this paper is to determine if an unloaded squat jump and an IMTP, alongside other athlete variables, can be used to create an athlete vertical FVP and training recommendation comparable to the standard protocol. / Graduate
|
2 |
Effects of Life-Long Wheel Running Behavior on Plantar Flexor Contractile PropertiesBeechko, Alexander Nicholas 01 June 2019 (has links)
Aging in skeletal muscle is characterized by a loss in muscular performance. This is in part related to the direct loss of muscle mass due to senescence, known as sarcopenia. With age, skeletal muscles lose force production, contractile speed, and power production. The force velocity relationship of muscle is a product of force production and contraction speed, both of which decline with age; however, the mechanisms and trajectory of this decline are not well understood. Exercise has positive effects on muscle, and thus may assist in maintaining performance in old age. However, few long-term studies have been performed to examine the effects of life-long exercise on muscle contractile performance. In order to test the potential for life-long exercise to reduce the effects of again on muscle contractile performance, muscle performance was determined in control mice and mice selected for high voluntary wheel running at baseline, adult, and old ages. Peak isometric force declined with age in control (C) mice without exercise (P
|
3 |
The use of velocity-based training in strength and power training - A systematic reviewDahlin, Michell January 2018 (has links)
Background: The intensity or load of a strength training exercise is commonly considered to be the most important factor contributing to muscular strength and power. Traditionally in strength training, intensity is defined as the percentage of the maximum weight that can be lifted once i.e. 1 repetition maximum. For power development exercises, the velocity can be used to measure the intensity. A linear position transducer is able to measure kinetic and kinematic variables. Velocity-based training refers to the usage of a linear position transducer to track movement velocity of an exercise and thus, using velocity, rather than load, as a measurement of intensity. Purpose: The purpose of this systematic review was to provide an analysis of the existing velocity-based training research utilizing a linear position transducer. The study also aimed to investigate the validity and reliability of different commercial linear position transducers for kinetic and kinematic measurements. Method: A systematic review was conducted from 19 studies on velocity-based training that met the selection criteria and underwent a quality assessment. Results: It was possible to predict the 1 repetition maximum using velocity and the minimal velocity threshold was stable across different relative intensities. Performing squats at either maximal velocity, or stopping at a velocity loss of <40% could significantly improve 1 repetition maximum, increase mean velocity during a set of squats as well as vertical jump performance. Two linear position transducer were found to have excellent validity and reliability for both kinetic and kinematic measurements. Conclusion: Velocity-based training was beneficial for enhancing neuromuscular adaptions and could be used to predict the 1 repetition maximum. When using of a linear position transducer for power development, it is suggested that it is valid and reliable for both kinetic and kinematic measurements.
|
4 |
Concurrent validity of an inertial sensor for measuring muscle mechanical propertiesOlovsson Ståhl, Elias, Öhrner, Pontus January 2020 (has links)
Background: The usage of the Force-Velocity relationship for individualizing training regimes for athletes has increased in popularity. This can be done through measurements of muscle mechanical properties and creating individual force-velocity profiles. To do this, one must use valid and reliable test equipment. These types of equipment are often expensive and impractical, which limits the usage to a small population with the right financial means. Therefore, the purpose of this study was to examine the concurrent validity of the inertial sensor Vmaxpro for measuring muscle mechanical properties. Method: 52 male ice-hockey players (age:17.9 ± 2.2 years, body weight: 77.7 ± 10.6 kg, height: 180.3 ± 6.2 cm) participated in this study and performed two jumps each on four different loading conditions (unloaded, 25, 50 and 75% of BW). The jumps were recorded simultaneously with an inertial sensor and a linear transducer. Three different variables were analyzed: peak velocity (pV), average velocity (avgV) and average power (avgP). Pearson’s correlation coefficient (r), linear regression analysis, Bland-Altman analysis, and standard error of estimate (SEE) was used to examine the concurrent validity. Results: The results showed a strong correlation, agreement and small SEE for pV: r=0.98, bias = -0.12, SEE = 0.08, for avgV: r=0.98 bias = 0.01, SEE = 0.04 and for avgP: r = 0.97, bias = 30.94, SEE = 73.47. Practical application: The results from the present study indicate that the Vmaxpro can be used for assessing muscle mechanical properties. Furthermore, since the Vmaxpro is both cheap and portable, it can potentially expand the usage of test equipment to clubs and associations with limited budgets.
|
5 |
Investigating Force-Velocity Profile Alterations and Methodology after Traditional Resistance TrainingD'Amato, Joseph 01 August 2022 (has links)
The purposes of this dissertation were to examine the agreement the agreement between double integration using the trapezoidal method and measurements for push-off distance to create force-velocity profiles, examine the change in push-off distance between loading conditions when force-velocity profiling, and to observe the alterations in mechanical outputs of force-velocity profiles after 15-weeks of off-season training. The major findings are as followed. Using double integration with the trapezoidal method may be a reliable way to estimate push-off distance, despite a small systematic bias. This bias should have negligible effects on push-off distance and therefore not alter or effect calculations in a meaningful way. Therefore, using double integration for push-off distance estimation may provide the ability to retrospectively create force-velocity profiles. The analysis of change in push-off distance at each loading condition suggests that there is 5-10% change in push-off distance between conditions. The significant changes in push-off distance occurred between the bodyweight condition and 20 kg as well as bodyweight and 40 kg loading conditions. The observed mechanical output alterations after training did not yield any significant changes in mechanical outputs. However, based on the observed output changes in conjunction with the previous training, force-velocity profiling may be primarily indicative of acute training styles.
|
6 |
The determinants of running performance in middle distance female athletesMpholwane, Matome Lieghtone 19 August 2008 (has links)
ABSTRACT
Male subjects are invariably used to study the physiological determinants of middle
distance running performance. Studies that do include females have examined only the
aerobic contribution to middle distance running performance. The aim of the present
study was to investigate aerobic, anaerobic and muscle function factors that could be used
to predict middle distance running performance in female runners. This study was
performed at an altitude of 1800m.
Eleven middle distance female runners aged 18-20 were selected for the study.
Aerobic capacity was assessed by measuring the maximal oxygen consumption
(VO2max), running velocity at maximal oxygen consumption (vVO2max), running
economy (RE) and onset of blood lactate accumulation (OBLA).
The blood lactate curve of each subject was constructed by relating the oxygen
consumption, to the plasma lactate concentrations.
Anaerobic capacity was determined by measuring the maximum accumulated oxygen
deficit (MAOD) on a treadmill. Muscle function was assessed by having the subjects
cycle as fast as possible against changing brake weights ranging from heavy to light using
a Monark cycle ergometer. The brake force (kg) was related to velocity (rpm).
|
7 |
A Novel Approach of Modelling and Predicting Track Cycling Sprint PerformanceDunst, Anna Katharina, Grüneberger, René 26 April 2023 (has links)
In cycling, performance models are used to investigate factors that determine performance and to optimise competition results. We present an innovative and easily applicable mathematical model describing time-resolved approaches for both the physical aspects of tractional resistance and the physiological side of propelling force generated by muscular activity and test its validity to reproduce and forecast time trials in track cycling. Six elite track cyclists completed a special preparation and two sprint time trials in an official velodrome under continuous measurement of crank force and cadence. Fatigue-free force-velocity profiles were calculated, and their fatigue-induced changes were determined by non-linear regression analysis using a monoexponential equation at a constant slope. Model parameters were calibrated based on pre-exercise performance testing and the first of the two time-trials and then used to predict the performance of the second sprint. Measured values for power output and cycling velocity were compared to the modelled data. The modelled results were highly correlated to the measured values (R2>0.99) without any difference between runs (p>0.05; d<0.1). Our mathematical model can accurately describe sprint track cycling time trial performance. It is simple enough to be used in practice yet sufficiently accurate to predict highly dynamic maximal sprint performances. It can be employed for the evaluation of completed runs, to forecast expected results with different setups, and to study various contributing factors and quantify their effect on sprint cycling performance.
|
8 |
Modeling Optimal Cadence as a Function of Time during Maximal Sprint Exercises Can Improve Performance by Elite Track CyclistsDunst, Anna Katharina, Grüneberger, René, Holmberg, Hans-Christer 26 April 2023 (has links)
In track cycling sprint events, optimal cadence PRopt is a dynamic aspect of fatigue. It is currently unclear what cadence is optimal for an athlete’s performance in sprint races and how it can be calculated. We examined fatigue-induced changes in optimal cadence during a maximal sprint using a mathematical approach. Nine elite track cyclists completed a 6-s high-frequency pedaling test and a 60-s isokinetic all-out sprint on a bicycle ergometer with continuous monitoring of crank force and cadence. Fatigue-free force-velocity (F/v) and power-velocity (P/v) profiles were derived from both tests. The development of fatigue during the 60-s sprint was assessed by fixing the slope of the fatigue-free F/v profile. Fatigue-induced alterations in PRopt were determined by non-linear regression analysis using a mono-exponential equation at constant slope. The study revealed that PRopt at any instant during a 60-s maximal sprint can be estimated accurately using a mono-exponential equation. In an isokinetic mode, a mean PRopt can be identified that enables the athlete to generate the highest mean power output over the course of the effort. Adding the time domain to the fatigue-free F/v and P/v profiles allows time-dependent cycling power to be modelled independent of cadence.
|
9 |
A differential-based parallel force/velocity actuation concept : theory and experimentsRabindran, Dinesh, 1978- 05 February 2010 (has links)
Robots are now moving from their conventional confined habitats such as factory floors to human environments where they assist and physically interact with people. The requirement for inherent mechanical safety is overarching in such human-robot interaction systems. We propose a dual actuator called Parallel Force/Velocity Actuator
(PFVA) that combines a Force Actuator (FA) (low velocity input) and a Velocity Actuator (VA) (high velocity input) using a differential gear train. In this arrangement mechanical safety can be achieved by limiting the torque on the FA and thus making it a backdriveable input. In addition, the kinematic redundancy in the drive can be used to control output velocity while satisfying secondary operational objectives. Our research focus was on three areas: (i) scalable parametric design of the PFVA, (ii) analytical modeling of the PFVA and experimental testing on a single-joint prototype, and (iii) generalized model formulation for PFVA-driven serial robot manipulators. In our analysis, the ratio of velocity ratios between the FA and the VA, called the relative scale factor, emerged as a purely geometric and dominant design parameter. Based on a dimensionless parametric design of PFVAs using power-flow and load distributions between the inputs, a prototype was designed and built using commercial-off-the-shelf components. Using controlled experiments, two performance-limiting phenomena in our prototype, friction and dynamic coupling between the two inputs, were identified. Two other experiments were conducted to characterize the operational performance of the actuator in velocity-mode and in what we call ‘torque-limited’ mode (i.e. when the FA input can be backdriven). Our theoretical and experimental results showed that the PFVA can be mechanical safe to both slow collisions and impacts due to the backdriveability of the FA. Also, we show that its kinematic redundancy can be effectively utilized to mitigate low-velocity friction and backlash in geared mechanisms. The implication at the system level of our actuator level analytical and experimental work was studied using a generalized dynamic modeling framework based on kinematic influence coefficients. Based on this dynamic model, three design case studies for a PFVA-driven serial planar 3R manipulator were presented. The major contributions of this research include (i) mathematical models and physical understanding for over six fundamental design and operational parameters of the PFVA, based on which approximately ten design and five operational guidelines were laid out, (ii) analytical and experimental proof-of-concept for the mechanical safety feature of the PFVA and the effective utilization of its kinematic redundancy, (iii) an experimental methodology to characterize the dynamic coupling between the inputs in a differential-summing mechanism, and (iv) a generalized dynamic model formulation for PFVA-driven serial robot manipulators with emphasis on distribution of output loads between the FA and VA input-sets. / text
|
10 |
Resisted Sprint Training in Swimming : A Quasi-Experimental Study on Swedish National Level SwimmersLutula, Antonio January 2019 (has links)
Aim The aim of this study was to ascertain the effect of resisted sprint training in swimming on maximal swimming velocity and performance characteristics. The aim was also to examine how maximal swimming velocity is related to maximal swim power and maximal dry-land power. Method Eighteen competitive national level swimmers (9 male and 9 female; age: 18.3 ± 2.3 years, body mass: 72 ± 8.3 kg, height: 177.2 ± 4.6 cm, mean ± SD) were recruited to this study. Subjects were assigned to either resisted sprint training (RST) or unresisted sprint training (UST). Sprint training was performed two times per week during 6 weeks as 8x15m with a 2min send-off interval. RST performed sprint training using individualized load corresponding 10% of maximum drag load (L10), UST performed sprint training with no added resistance. A test-battery including dry-land strength assessment; maximal strength (MxS) and explosive strength (ExS), a timed 25m front-crawl swim and in-water force-velocity profiling was performed prior and following the training intervention. Maximal swim power (Pmax), maximum drag load (F0), theoretical maximum velocity (v0) and slope of force-velocity curve (SFv) was computed though force-velocity profiling. Results No significant within group differences occurred in neither RST nor UST following the 6-week intervention period in: swimming velocity, MxS, ExS, Pmax, F0, v0, and SFv. Strong correlations were found between swimming velocity and MxS (r = 0.75), ExS (r =0.82) and Pmax (r = 0.92). Conclusion Resisted sprint training in swimming using L10 did in the present study not elicit any improvements in maximal swimming velocity or examined performance characteristics. Resisted sprint training does not appear to be a superior method of improving swimming performance compared to unresisted sprint training. MxS, ExS and Pmax can be used as robust predictors of swim performance, however only Pmax was found to be casually related to swimming velocity.
|
Page generated in 4.151 seconds