This project is part of a collaborative MSc training programme between the Aviation Industries of China (AVIC) and Cranfield University, aiming at enhancing the competitiveness of AVIC in both international and domestic aviation market through applying continuing airworthiness policies in the whole aircraft development process. The arrangement of the research project is that all students start with a Group Design Project which is based on the Flying Crane Project provided by AVIC. Individual research projects will address some aspects of the Flying Crane Project during the Group Design Project, and then further developed during the period for individual projects. The aim of this research is to apply the airworthiness requirements and the methodology of the Maintenance Steering Group logic (MSG-3) in the Flying Crane Project. This is because that maintenance is one of the key factors of Continuing Airworthiness, and MSG-3 logic is the most accepted and approved method to develop scheduled maintenance for civil aircrafts. The main objectives of this project include: (1) To investigate current Continuing Airworthiness regulations, including European airworthiness requirements (as the main regulation to comply with) and Chinese airworthiness regulations (as an important reference and supplement to the research); (2) To investigate the main analysis methodology of reliability and maintainability, including Damage Tolerance and Failure Mode and Effect Analysis (FMEA); (3) To analyse the data resulted from the Group Design Project using MSG-3 logic to produce a set of Continuing Airworthiness instructions, for the operator and maintenance organisation of the aircraft, from the design organization’s perspective; (4) To develop Continuing Airworthiness instructions for airline operators to compose maintenance programmes for Flying Crane aircrafts, including maintenance tasks and intervals for the selected airframe systems and structural components; and (5) To identify applicable maintenance organisations in China for Flying Crane aircrafts in accordance with both European and Chinese airworthiness requirements. On completion of this research, two aspects of Continuing Airworthiness have been investigated, including maintenance programme and maintenance organization. With MSG-3 logic, the author developed the maintenance plan for three structural components (fuselage skin panel, wing root joint, and fin-fuselage attachment) and one airframe system (fuel system) based on results from the Group Design Project. The author also investigated the Chinese domestic aircraft maintenance companies, and selected suitable maintenance organizations based on technical and economical criteria.

Orientador: Mauro Hugo Mathias / Resumo: Este trabalho traz para a indústria aeronáutica e para a academia um método para aumentar a aderência de requisitos de segurança de cabine ao produto final da engenharia de interiores de aviões, melhorando a qualidade técnica das soluções e reduzindo ciclos de desenvolvimento para novas configurações de interiores para aviões de transporte de passageiros. A pesquisa analisa os requisitos de aeronavegabilidade de interiores aplicáveis à segurança da cabine, os aspectos de ergonomia envolvidos no design de interiores e a origem da tecnologia de segurança de cabine. É discutido um aspecto de design conhecido como usabilidade e explica por que esse conceito é relevante para o projeto cabines de avião. Também são discutidos fatores humanos, erros humanos na segurança da cabine e conceitos relevantes que projetistas precisam considerar para projetos em segurança de cabine. Considerando os aspectos acima mencionados foi desenvolvido, descrito e aplicado um método denominado Design for Cabin Safety. O método que através de específicos passos objetiva aumentar a aderência de requisitos de aeronavegabilidade aplicáveis à segurança de cabine para projeto de interiores de aviões. Subsequente ao seu desenvolvimento o método foi aplicado em testes práticos em aeronaves reais e com diferentes usuários atestando sua praticidade. Desta forma a hipótese da tese foi explicada e a principal pergunta da tese foi respondida. A pesquisa termina com resultados, discussões e conclusão sobre o desenvo... (Resumo completo, clicar acesso eletrônico abaixo) / Doutor

This Master's Thesis deals with design of innovative electric platform truck with revolving cabin. This approach substantially increases comfort and safety, when driving backward. First part of the thesis is analytical and summarizes development and current state of platform trucks from perspective of design and technology, second part deals with design concept from perspective of shape and aesthetics, ergonomy, graphic design and technological issues.

The purpose of this thesis work was to study the airflow patterns and the particle distribution in a generic car cabin in order to evaluate the air quality and find how it can be improved. A 3D CAD model was created using the Solidworks software program and meshed using ICEM CFD software. The ICEM CFD software was used to generate the mesh and ANSYS FLUENT was adapted for the simulation. In total, 12 different cases were simulated by considering different inlet velocities and vent setup. The predicted results were further used to analyze the airflow and particle distribution in the entire car cabin. With higher inlet velocity there were more particles being transported to the rear part of the cabin. In general, the particle concentration was higher in the front of the cabin when they were introduced through the inlets, especially with low inlet velocities. Opening the recirculation vents resulted in a slight reduction of the flow to the rear side and reduced the particle distribution accordingly. When smoke particles were introduced in the rear seats, they mostly stayed in the rear of the cabin, especially with low inlet flow velocities as the air did not mix sufficiently. Overall a higher inlet airflow velocity reduced the number of particles that were trapped on the front and rear seats. However, an increase in the number of particles that were trapped on the ceiling, floor and walls were obtained. / Syftet med den här avhandlingen var att studera luftflödesmönster och partikelfördelningen i en generell bilkabin för att utvärdera luftkvaliteten och se hur man kan förbättra den. En 3D CAD-modell skapades med hjälp av Solidworks och ett rutnät skapades med hjälp av ICEM CFD. ICEM CFD användes för att generera rutnätet och ANSYS FLUENT användes för simuleringarna. Totalt simulerades 12 olika fall bestående av olika inflödeshastigheter och ventilinställningar. De beräknade resultaten användes sedan för att analysera luftflödet och partikelfördelningen i hela bilkabinen. Med högre inloppsflöde var det fler partiklar som transporterades till bakre delen av bilkabinen. Överlag var partikelkoncentrationen högre i framdelen av kabinen när partiklarna introducerades i inloppsventilerna, särskilt vid låga inloppshastigheter. Att öppna recirkulationsventilerna resulterade i en liten minskning av luftflödet till bakdelen av kabinen och även så partikelfördelningen. När rökpartiklar introducerades i baksätena, stannade de för det mesta i bakdelen av kabinen, särskilt vid låga inloppsflödeshastigheter då luften inte blandades tillräckligt. Överlag innebar en högre inloppsflödeshastighet reducerade mängden av partiklar som fastnade på fram- och baksätena, men ökade mängden partiklar som fastnade på taket, golvet och på väggarna.

With advancements in technology, electric vehicles are dominating the world making Internal Combustion engines less relevant, and hence vehicles are becoming quieter than ever before. But noise levels remain a significant concern for both passengers and automotive manufacturers. The vehicle's interior noise can affect the overall driving experience and even the safety of the driver and the passengers. The two main sources of vehicle interior noise are attributed to air-borne noises and structure-borne noises. A modern automobile is a complicated vibration system with several excitation sources like the engine, transmission system, tire/road interface excitation, and wind noise. With electric vehicles on the rise, the engine and transmission noise is practically eliminated, and effective preventive measures and control systems are already in place to reduce the aerodynamic-based noise, vibrations, and harshness (NVH) in modern automobiles making the structure-borne noise the most crucial of the noise sources. Tire/road interaction noise being the most dominant among the structure-borne noise is the main concern of the vehicle interior noise. The two main sources of vehicle interior noise induced by the tire pavement interaction noise are structure-borne noise induced by the low-frequency excitation and air-borne noises produced by the mid and high-frequency excitation. The present study tested an all-season tire over varying operational conditions such as different speeds, normal loads, and inflation pressures on an asphalt surface. Two tri-axial accelerometers attached 1800 apart from each other on the inner liner of the tire of a Volkswagen Jetta were used to measure the circumferential, lateral, and radial acceleration data. An Inertial Measurement Unit (IMU) and velocity box (VBOX) were instrumented in the vehicle to measure the acceleration at the center of gravity (COG) position of the vehicle and the longitudinal velocity of the vehicle respectively. The vehicle was also equipped with a modified hybrid of Close Proximity Testing (CPX) and On-Board Sound Intensity (OBSI) sound measurement systems which were designed and manufactured in-house to measure the tire/road interaction noise at the leading and trailing edges of the tire/road contact patch. Another microphone was instrumented inside the passenger compartment of the vehicle at the passenger's seat right ear position over the tire mounted with the sound measurement system to measure the vehicle interior noise as interpreted by the passengers in the vehicle. Two data acquisition systems coupled with a real-time Simulink model were used to collect all the measured data, one for the noise signals and the other for velocity and acceleration signals. The focus of the current study is to review different generation and amplification mechanisms of the structure-induced tire/road interaction noise and find the relevant dominant frequency ranges of the vehicle interior noise induced by the structure-borne noises using already established physics-based models and correlation techniques. It also aims to find correlations between tire acceleration, vehicle interior noise, and tire pavement interaction noise and their effect on different operational conditions like load, inflation pressure, and velocity. All the signals are studied in the time, frequency, and spectral domain and insights have been drawn on different tire/road noise generation and amplification mechanisms. / Master of Science / Structure-induced vehicle interior noise is one of the main concerns surrounding the automotive NVH industry and tire/road interaction noise being the most dominant source among the structure-borne noises affecting the vehicle interior noise is a major problem to the tire and automotive manufacturers nowadays. It leads to discomfort for the driver and the passengers in the vehicle and can cause fatigue, which in turn can directly affect the vehicle's safety. Several attempts have been made to reduce vehicle interior noise using statistical, physics-based, and hybrid models, but the research is still nowhere near completion. The current study aims to identify the frequency ranges affecting the structure-borne noise-induced vehicle interior noise and uses data-driven approaches in estimating the vehicle interior noise using only the acceleration of the tire. A test setup was designed and developed in-house where a tri-axial accelerometer embedded inside the inner liner of the tire measures the X, Y, and Z acceleration signals. Several microphones are instrumented at the tire/road contact surface and inside the passenger cabin to measure the tire/road interaction noise and the vehicle interior noise. The longitudinal velocity of the vehicle and the accelerations at the center of gravity of the vehicle have also been measured. Multiple data-driven models have been developed to directly predict the vehicle interior noise and tire/road interaction noise using the accelerometer data. This research is directly helpful for the automotive and tire industries by giving them insights on designing and developing quieter tires by using data-driven approaches and further using these with active control systems can mask the vehicle interior noise to acceptable levels in real-time.

Tatra mountain region is considered to be a part of Slovak and Polish national identity. It is remarkable for outstanding sceneries and man’s relation to the country that developed from first settlements to an important tourist tradition. Such large area can be retained only by preserving its values that stay valid through time. New concept for the region is based on fully functional network of tourist trails. Proposing four objects of tourist accommodation in thoroughly selected locations, the project presents an idea of architectural space dealing with different requirements of its users.

No description available.

Cabines de veículos automotores recém-manufaturados podem ser consideradas críticas quando se avalia a qualidade do ar interno, pois concentrações de compostos orgânicos voláteis encontram-se em níveis mais altos que os ambientes externos. Determinadas substâncias presentes no ar da cabine podem ser prejudiciais ao ser humano em função da sua toxicidade, pricipalmente nos grandes centros urbanos. A avaliação do ar da cabine automotiva se faz necessária. Nesse estudo, foi feita uma avaliação da qualidade do ar interno da cabine de 7 veículos populares recém-manufaturados contendo materiais de acabamento interno iguais. Um total de 46 compostos orgânicos voláteis foi identificado, sendo que 14 deles são compostos carbonílicos e 32 são hidrocarbonetos alifáticos e aromáticos, compostos halogenados e um nitrogenado. Os compostos carbonílicos foram identificados e quantificados por cromatografia a líquido e os outros VOCs apenas identificados por GC-MS. No ar interno da cabine dos veículos estudados, as concentrações médias encontradas para os compostos carbonílicos (µg/m3) em ordem decrescente foram: formaldeído (165,3); acetona (67,5); acetaldeído (56,8); isovaleraldeído (40,8); propionaldeído (21,1); butiraldeído (17,9); crotonaldeído (14,9); hexaldeído (14,9) valeraldeído (9,8); 2.5- dimetilbenzaldeído (9,3); otolualdeído (8,4); p/m tolualdeído (6,8); acroleína (4,2) e benzaldeído (3,8). Com relação aos outros VOCS foram identificados o metilbutano, que apresentou a maior porcentagem de abundância relativa, 8,5%, seguido de outros hidrocarbonetos com abundância relativa entre 5 e 2% , como, 2,7,10-trimetildodecano, 2,2,6-trimetildecano, ciclopentano, 2,3,4-trimetildecano, n-pentano, 3,6-dimetilundecano, 4-metildodecano, 4,6- dimetildodecano, 3,6-dimetildecano e 1,2-dimetilbenzeno. Dois derivados de hidrocarbonetos halogenados também foram encontrados, sendo que o triclorofluormetano foi o majoritário com 5,7%, e um composto nitrogenado, a acetonitrila com 5,4%. Os compostos derivados do benzeno identificados foram: 1,2-dimetilbenzeno, etilbenzeno, metilbenzeno, 1-etil-3- metilbenzeno, 1-etil-3-metilbenzeno e 1,3,5-trimetilbenzeno que perfazem 6,6 % de abundância relativa. O mais abundante entre os aromáticos foi o 1,2-dimetilbenzeno (2,5%). Os resultados experimentais revelaram também a liberação de VOCs pelos materiais de acabamento interno dos veículos automotores recém-manufaturados. / New motor vehicles cabins may be critical when considering the internal air quality, because concentrations of volatile organic compounds are at levels higher than the outdoors. Certain substances present in the cabin air can be harmful to humans according to their toxicity, mainly in the big cities. Assessment of the cabin air becomes necessary. In this study, cabin air quality was assessed and 7 popular new vehicles containing same interior trim materials were evaluated. A total of 46 volatile organic compounds were identified, with 14 of them were carbonylic compounds and 32 are aliphatic and aromatic hydrocarbons, halogenated compounds and a nitrogenated compound. The carbonylic compounds were identified and quantified by the liquid chromatography and other VOCs only identified by GC-MS. Cabin air vehicles studied showed the following average concentrations found for carbonylic compounds ( µg/m3) in a descending order: formaldehyde (165.3), acetone (67.5); acetaldehyde (56.8); Isovaleraldehyde ( 40.8); propionaldehyde (21.1); butyraldehyde (17.9); crotonaldeído (14.9); hexaldeído (14.9) Valeraldehyde (9.8); dimetilbenzaldeído-2.5 (9.3); the - tolualdeído (8.4), p / m - tolualdeído (6.8); acrolein (4.2) and benzaldehyde (3.8). Concerning the other VOCs the following compounds were identified: methylbutane, which had the highest percentage of relative abundance, 8.5%, followed by other hydrocarbons with relative abundance between 5 and 2%, 2,7,10-trimetildodecano, 2.2 ,6- Trimetildecano, ciclopentano, 2,3,4-trimetildecano, n-pentane, 3.6-dimetilundecano, 4- metildodecano, dimetildodecano-4.6, 3.6 and 1.2-dimetildecano-dimetilbenzeno. Two halogenated hydrocarbons were also found, and triclorofluormetano had the biggest relative abundance percentage 5.7%, and a nitrogen compound, the acetonitrile with 5.4%. The benzene compounds identified were: 1.2-dimetilbenzeno, ethylbenzene, methylbenzene, 1- ethyl-3-methyl, ethyl-1-and 3-methyl 1,3,5-trimethylbenzene which comprise 6.6% of relative abundance. 1.2-dimetilbenzeno was the most abundant aromatic compound with relative abundance 2.5%. Results also showed that VOCs were released by studied vehicles interior trim materials.

Recent media scholars have taken, as their focus, relationships between qualitative research methods and examinations of contemporary media texts (e.g., Fox, 2013; Manning, Dunn, & Stern, 2012; Meyer, 2012). The purpose of this panel is to further examine these relationships. Participants will demonstrate how a qualitative research method (e.g., ethnography, autoethnography, narrative analysis, textual or discourse analysis, audience studies) can be used to study contemporary television and film texts (e.g. Coronation Street, Here Comes Honey Boo Boo, Orange is the New Black, Mad Men, Cabin in the Woods, The Butler). Participants will first discuss their particular method and then provide an exemplar of that method as they examine their chosen media text(s). To assist with the audience discussion of these methods and texts, participants will also include a brief clip/excerpt of their chosen texts.

Detractors of sentimental literature argue that such novels are unoriginal and concerned primarily with emotions. Feminist scholars redeem the reputation of sentimental literature to an extent. At present, a multitude of approaches present sentimental authors as active agents, engaging with public issues. Building upon the scholarship of prominent feminist historians and literary critics, this thesis provides direct evidence that three female authors embrace the responsibilities of being a social critic. The Wide, Wide World (1850) by Susan Warner, Uncle Tom’s Cabin (1851) by Harriet Beecher Stowe, and The Hidden Hand (1859) by Emma D.E.N. Southworth provide unique commentaries on the separation of the private and public spheres, market revolution, and religion. Decisive differences between the authors’ opinions reveal a high degree of engagement with the public issues.