No description available.

No description available.

No description available.

No description available.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第24108号 / 工博第5030号 / 新制||工||1785(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 作花 哲夫, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

No description available.

<p>The study of ultrathin magnetic films offers novel magnetic phenomena due to the reduced symmetry of these 2D systems. The magnetic anisotropy differentiates behaviour in ultrathin films from the bulk environment, as additional anisotropies emerge from the ultrathin film thickness and the inherent strain of ultrathin films. In this work, the in-plane magnetic anisotropy of strained ferromagnetic (FM) ultrathin Co(0001) films grown on a W(110) substrate is measured over a range of temperatures (150-320 K). Low energy electron diffraction (LEED) and Auger electron spectroscopy (AES) were used to determine the film structure and thickness. The anisotropy is derived from the quotient of the saturation magnetization and the transverse susceptibility, which are measured using the surface magneto-optic Kerr effect (SMOKE).</p> <p>This work’s second objective is to study the Néel transition in antiferromagnetic (AFM) ultrathin films. The zero net magnetization of AFM materials and the minute sample size of ultrathin films make magnetic measurements impossible with conventional methods. An alternative approach is to study a single AFM ultrathin film that is coupled by the interfacial exchange interaction to a FM ultrathin film. The upper layers of ultrathin Co/W(110) films were oxidized to produce ultrathin CoO/Co/W(110) films, creating an AFM/FM bilayer system. SMOKE measurement of the transverse magnetic susceptibility of the FM Co layer reveal the Néel transition of the AFM layer indirectly through the interfacial exchange interaction.</p> / Master of Science (MSc)

It is known that organic monolayers on solid surfaces can enable electronic properties that are absent in the bulk of the solid materials. Often, once the organic film come into the contact with a solid surface, the established electronic interaction at their interface remains undisturbed. However, using a redox-active organic monolayer creates the possibility for modulating the extent and the direction of the interfacial charge transfer, establishing a switch at the interface. The theme of this thesis is investigation of the interfacial interaction of different redox states of a molecular switch, phenyl-capped aniline tetramer (PCAT) with iron oxide and graphite surfaces and their potential application in electronic devices. The nucleation and growth of submonolayer films of different oxidation states of PCAT on iron oxide surface was studied. Using atomic force microscopy and scaling island size distribution method the surface diffusion parameters of these islands were evaluated. Using X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy the changes in these organic monolayers before and after interaction with iron oxide were demonstrated. However, these techniques were unable to provide similar data from the solid surface side of the interface. Instead, we were able to demonstrate the changes in the iron oxide film as a result of interfacial charge transfer using electrical conductivity measurement techniques. Based on this information a microfluidic chemical sensor based on the interface of pencil film and PCAT for quantification of free chlorine in drinking water was constructed. Using XPS and UV-vis spectroscopy it was shown that the interaction the organic monolayer with sodium hypochlorite solution leads to the development of positive charges on the backbone of PCAT. This electrostatic charge can affect the charge transport in the pencil film causing the modulation of electrical conductivity of the film. The presented work demonstrates alternative pathways for the design of novel hybrid electronic devices based on thin molecular film and solid surfaces. / Thesis / Doctor of Philosophy (PhD)

Despite the many attractive features of carbon fiber reinforced polymers (FRPs) composites, they are prone to failure due to delamination. The ability to tailor the fiber/matrix interface FRPs is crucial to the development of composite materials with enhanced structural performance. In this dissertation, ZnO nanowires (NWs) were grown on the surface of carbon fibers utilizing low temperature hydrothermal synthesis technique prior to the hybrid composite fabrication. The scanning electron microscopy revealed that the ZnO nanowires were grown uniformly on the surface of the carbon fabric. The surface grown ZnO NWs functionally-graded the composite material properties and ensured effective load transfer across the interface. To assess the influence of the ZnO NWs growth, reference samples were also prepared by exposing the carbon fabric to the hydrothermal conditions. The damping properties of the hybrid ZnO NWs-CFRP composite were examined using the dynamic mechanical analysis (DMA) technique. The results showed enhanced energy dissipation within the hybrid composite. Quasi-static tensile testing revealed that the in-plane and out-of-plane strengths and moduli of the hybrid FRP composite were also boosted. The interlaminar shear strength (ILSS) measurements suggested the improvement in the mechanical properties of the composite to the enhanced adhesion between the ZnO nanowires and the other constituents (carbon fiber and epoxy). It was necessary thus, to utilize the molecular dynamics simulations (MD) to investigate the adhesion within the CFRP structure upon growing the ZnO nanowires on the surface of the carbon fibers. Molecular models of the carbon fibers, the epoxy matrix and the ZnO nanowires were built. The resulting molecular structures were minimized and placed within a simulation box with periodic boundary conditions. The MD simulations were performed using the force field COMPASS to account for the empirical energy interactions between the different toms in the simulation box. Proper statistical thermodynamics were employed to relate the dynamics of the molecular model to the macroscale thermodynamic states (pressure, temperature and volume). Per the computed potential energies of the different components of the composite, it was found that the polar surfaces in the ZnO structures facilitates good adhesion properties in the graphite-epoxy composite. Besides the attractive mechanical properties of the ZnO nanowires, their piezoelectric and semiconductor properties were sought to design an energy harvesting device. To ensure sufficient charges collection from the mechanically stressed individual ZnO nanowires, a copper layer was sputtered on top of the ZnO nanowires which introduced also a Schottky effect. The mechanical excitation was provided by exposing the device to different vibration environment. The output voltage and currents were measured at the conditions (in terms of frequency and resistive load). It was demonstrated that the electrical output could be enhanced by stacking up similar devices in series or in parallel. Finally, in an attempt to exploit the reversibility of the electromechanical coupling of the energy harvesting device, the constitutive properties of the hybrid ZnO nanowires-CFRP composite were estimated using the Mori-Tanaka approach. This approach was validated by a finite element model (FEM). The FEM simulations were performed on a representative volume element (RVE) to reduce the computational time. The results demonstrated that the mechanical properties of the hybrid ZnO NWs-CFRP composite were better than those for the baseline CFRP composite with identical carbon fiber volume fraction (but with no ZnO NWs) which confirmed the experimental findings. Furthermore, the electro-elastic properties of the hybrid composite were determined by applying proper boundary conditions to the FE RVE. The work outlined in this dissertation will enable significant advancement in the next generation of hybrid composites with improved structural and energy harvesting multifunctionalties. / Ph. D.

As hydrogel products are manufactured and used for applications ranging from biomedical to agricultural, it is useful to characterize their behavior and interaction with other materials. This thesis investigates the adhesion between two different solvated semi-interpenetrating polymer network (S-IPN) silicone hydrogels and a cyclo-olefin (COP) polymer through experimental, analytical, and numerical methods. Interfacial fracture data was collected through the application of the wedge test, a relatively simple test allowing for the measurement of fracture properties over time in environments of interest. In this case, the test was performed at discrete temperatures within range of 4Ë C to 80Ë C. Two COP adherends were bonded together by a layer of one of the S-IPN silicone hydrogels. Upon the insertion of a wedge between the two adherends, debonding at one of the two interfaces would initiate and propagate at a decreasing rate. Measurements were taken of the debond length over time and applied to develop crack propagation rate versus strain energy release rate (SERR) curves. The SERR values were determined through the application of an analytical model derived for the wedge test geometry and to take into account the effects of the hydrogel interlayer. The time-temperature superposition principle (TTSP) was applied to the crack propagation rate versus SERR curves by shifting the crack propagation rates with the Williams-Landel-Ferry (WLF) equation-based shift factors developed for the bulk behavior of each hydrogel. The application of TTSP broadened the SERR and crack propagation rate ranges and presented a large dependency of the adhesion of the system on the viscoelastic nature of the hydrogels. Power-law fits were applied to the master curves in order to determine parameters that could describe the adhesion of the system and be applied in the development of a finite element model representing the interfacial fracture that occurs for each system. The finite element models were used to validate the analytical model and represent the adhesion of the system such that it could be applied to future geometries of interest in which the S-IPN silicone hydrogels are adhered to the COP substrate. <i>[Files modified per J. Austin, July 9, 2013 Gmc]</i> / Master of Science