No description available.

New technologies present opportunities and challenges for industries. One major challenge is the ease, or even feasibility, of its adoption. The Time-Sensitive Networking (TSN) standards offer a range of features relevant to various applications and are key for the transition to Industry 4.0. These features include deterministic zero-jitter, low-latency data transmission, transmission of traffic with various levels of time-criticality on the same network, fault tolerance mechanisms, and advanced network management allowing dynamic reconfiguration. This thesis aims to develop tools that enable the industry to adopt TSN easily and efficiently. Specifically, we create tools that facilitate the migration of legacy networks to TSN, enabling the preservation of most of the legacy systems and solutions while reducing costs and adoption time. Firstly, we introduce LETRA (Legacy Ethernet-based Traffic Mapping Tool), a tool for mapping Ethernet-based legacy traffic to the new TSN traffic classes. Secondly, we develop HERMES (Heuristic Multi-queue Scheduler), a heuristic Time-Triggered (TT) traffic scheduler that can meet the characteristics of legacy systems and provide quick results suitable for reconfiguration. Thirdly, we develop TALESS (TSN with Legacy End-Stations Synchronization), a mechanism to avoid adverse consequences caused by the lack of synchronization between legacy systems and TSN-based ones, as not all legacy systems need to support the TSN synchronization mechanisms. Finally, we improve Stream Reservation Protocol (SRP) to enhance Audio-Video Bridging (AVB) traffic configuration in terms of termination and consistency. / Uppfinningen av ångmaskinen i slutet av 1700-talet markerade början på en kontinuerlig och snabb process av automatisering och förbättring inom industrin, som tog ytterligare fart i och med införandet av datorstyrda maskiner och robotik i mitten av 1900-talet. Moderna fabriker och deras produkter är beroende av hundratals specialiserade processorer, inklusive sensorer, ställdon och styrenheter, som samarbetar för att utföra uppgifter och tillhandahålla tjänster. Dessa processorer är beroende av kommunikations-subsystem för att samordna och dela resurser. Dessa system, som vanligtvis kallas distribuerade system, omger oss och används av de flesta människor hela tiden. Exempel på distribuerade system finns i en mängd olika exempel, från moderna bilar till fabriker som producerar olika varor. I en bil finns det till exempel många olika sensorer och ställdon som hastighetsmätare, positionssensorer, bränsleinsprutare och tändspolar, som alla arbetar tillsammans för att se till att bilen fungerar säkert och effektivt, medan det i fabriker används robotarmar, transportband och andra anordningar för att automatisera produktionsprocessen och öka effektiviteten. Den snabba utvecklingen av tekniken kan dock göra det svårt för företag att hålla jämna steg med de senaste verktygen och systemen, eftersom kostnaden för att införa tekniken kanske inte är kostnadseffektiv, inte bara på grund av att tekniken måste förvärvas, utan också på grund av de förändringar som införandet kräver i andra system som samarbetar. Till exempel skulle införandet av ett nytt kommunikations-subsystem kräva att alla enheter som använder det anpassas. Dessutom kräver uppgraderingen till nyare teknik ofta betydande resurser, inte bara ekonomiska utan även naturresurser. Detta kan leda till ökat avfall och ökade koldioxidutsläpp, vilket utgör en risk för miljön. Dessutom kan följderna av teknikuppgraderingar, till exempel bortskaffande av föråldrad utrustning och produktion av e-avfall, ha ytterligare miljöpåverkan. I den här avhandlingen fokuserar vi på Time Sensitive Networking (TSN), en ny kommunikationsstandard med betydande fördelar för den framväxande tekniken. Även om TSN-tekniken ger många fördelar, bland annat högre kommunikationshastighet och lägre latenstider, saknar många nuvarande industrisystem mjuk- och hårdvarukraven för att stödja denna teknik. Målet med vår forskning är därför tvåfaldigt: för det första att förbättra TSN’s mekanismer för att göra den mer attraktiv för industrin och för det andra att utveckla verktyg som möjliggör en sömlös migration och integration av äldre system till TSN, så att slutstationerna kan utnyttja fördelarna med TSN utan att behöva byta ut eller uppgradera större delen av systemet. Detta tillvägagångssätt sparar värdefull tid och resurser och minskar det avfall som uppstår under processen.

No description available.

No description available.

No description available.

A problem solving environment (PSE) provides all computational facilities necessary for solving a target class of problems efficiently. PSEs are used primarily for domain-specific problem-solving in science and engineering and aim to ease the burden of advanced scientific computing. Scientific problem solving, however, often involves the use of legacy resources which are difficult to modify or port, and may be distributed on different machines. Existing PSEs provide little support for solving such problems in a generic framework. This thesis investigates the design of a platform-independent system that enables problem solving using legacy resources without having to modify legacy code. It presents Symphony, an open and extensible Java-based framework for composition and manipulation of distributed legacy resources. Symphony allows users to compose visually a collection of programs and data by specifying data-flow relationships among them and provides a client/server framework for transparently executing the composed application. Additionally, the framework is web-aware and helps integrate web-based resources with legacy resources. It also enables programmers to provide a graphical interface to legacy applications and to write visualization components. Symphony uses Sun Microsystems' JavaBeans component architecture for providing components that represent legacy resources. These components can be customized and composed in any standard JavaBeans builder tool. Executable components communicate with a server, implemented using Java Remote Method Invocation mechanism, for executing remote legacy applications. Symphony enables extensibility by providing abstract components which can be extended by implementing simple interfaces. Beans implemented from the abstract beans can act as data producers, consumers or filters. / Master of Science

Yes / Legacy systems have continued to pose a major challenge to digital transformation efforts in public administration. A comprehensive review of literature suggests seven levels of complexity in transforming legacy systems, including, being a stand-alone system, being part of a larger system, and data incompatibility, each depicting unique criteria and challenges. Nonetheless, very little is known as to what degree these complexities implicate the implementation of digital transformation efforts in public administration (PA). To address this gap, this research conducted an analysis on four cases of digital transformation in three European PA settings (i.e., Denmark, the Netherlands, and the UK). The findings revealed complexities that pose the key challenges to systems interoperability and integrability, which are crucial in any digital transformation project. In addition, a comprehensive understanding of the systems to be transformed, the policies which they are serving, and the broader PA setting in which they are implemented were deemed central to succeeding in digital transformation efforts.

Att arbeta med ett äldre så kallat legacy-system är en vanlig uppgift bland dagens programmerare men det saknas data om hur arbetsinsatsen är fördelad. Denna data vore användbar för att utvärdera hur kostsamt det är att vidareutveckla ett system kontra en omskrivning eller migration. För att åtgärda detta bidrar den här undersökningen med data som visar arbetsinsatsfördelningen vid migration av ett mindre legacy-system. Frågan som undersöks är ”Hur fördelas kostnaden i tid när man utvärderar och bygger om ett legacy-system?. Grunden för data i denna undersökning kommer ifrån utvecklingen av ett litet studentutvecklat system som använts på KTH och som var i stort behov av uppdatering. Det fanns mycket dokumentation om systemets krav och design, men den kod som fanns var ej användbar då den ej var dokumenterad och saknade klar struktur. Detta ledde till en omskrivning av systemet enligt de krav som tidigare formulerats. I det här projektet användes en vetenskaplig fallstudie med en kvantitativ metod för att få fram resultat. Tiden som lades ned på de moment som identifierats innan uppstart mättes och användes för att beräkna arbetsinsatsfördelningen. Resultatet av denna undersökning är en samling data som kan användas för uppskattningen av arbetsinsatsfördelningen vid omskrivningen av ett mindre legacy-system. I denna undersökning redovisas arbetsinsatsfördelningen som uppmätts under migrationen av ett legacy-system till en ny teknologi, då det existerande systemet inte betraktades som värt att uppdatera. Undersökningens slutsats är att om det finns ett bra förarbete som går att använda för att bygga om systemet så kommer majoriteten av arbetsarbetsinsatsen att läggas på implementeringen av systemet i kod. / Working with legacy-systems is a common task for programmers, and the development of these requires a great effort, but data regarding the distribution of this effort is scarce. This data would be valuable when evaluating the cost of continued development of a system compared to a rewrite or migration. To rectify this, we aim to provide a datapoint regarding the effort distribution for the migration of a small legacy-system. Our question is “How is the cost in time distributed when a legacy-system is evaluated and rebuilt?”. The data presented in this thesis comes from the development of a legacy-system developed by students at KTH. The system needed an update since it had ceased to function. There was a great amount of documentation with regards to requirement specifications and application design which could be used when redeveloping the system. The code, however, lacked any substantial documentation and structure, so it was decided early on that rewriting the system according to the existing documentation was going to be more efficient than working with the code for the current system. A scientific case study built on quantitative methods was used to collect data. To measure effort the time spent on each predefined moment was counted in minutes, and this was used to calculate the distribution of effort. The result of this thesis is a table of data and a review of the distribution of effort when working on a small legacy-system with clear requirements. The data produced in this thesis is based on the effort spent on rewriting a system that was not worth updating. The conclusion of this thesis is that most of the effort will be spent on implementing the code when a clearly defined system is rewritten from the ground up.

Many researchers have highlighted the dire prospects for biodiversity in fragmented agricultural landscapes and stressed the need for increasing the area of, and connectivity between, natural ecosystems. Some have advocated the use of naturally regenerating forest ecosystems for sequestering atmospheric carbon, with opportunities for dual restoration and carbon benefits. However, no studies have explicitly explored the feasibility of obtaining such dual benefits from a regenerating woody ecosystem. This thesis aims to provide a detailed assessment of the restoration and carbon potential of Brigalow regrowth, an extensive naturally regenerating ecosystem throughout the pastoral regions of north eastern Australia. It combines observational, experimental and modelling techniques to describe the agricultural legacy of pastoral development, identify constraints to restoration and explore methods to remove these constraints. A review of existing ecological knowledge of Brigalow ecosystems is provided in chapter 3, along with discussion of policy and socio-economic issues that are likely to influence how and to what extent regrowth is utilised for restoration and carbon purposes in the Brigalow Belt. The review found restoring regrowth is likely to have benefits for a wide range of native flora and fauna, including the endangered bridled nailtail wallaby. Knowledge gaps exist relating to the landscape ecology of Brigalow regrowth and the impacts of management and climate change on carbon and restoration potential. Also, a conflict exists between short-term carbon sequestration and long-term restoration goals. Regional demand for high biomass regrowth as a carbon offset is likely to be high but ambiguities in carbon policy threaten to diminish the use of natural regrowth for reforestation projects. A large cross-sectional study of regrowth is presented in chapter 4. Data were analysed using multi-level / hierarchical Bayesian models (HBMs). Firstly, we found that repeated attempts at clearing Brigalow regrowth increases stem densities and densities remain high over the long term, particularly in high rainfall areas and on clay soils with deep gilgais. Secondly, higher density stands have slower biomass accumulation and structural development in the long term. Spatial extrapolations of the HBMs indicated that the central and eastern parts of the study region are most environmentally suitability for biomass accumulation, however these may not correspond to the areas that historically supported the highest biomass Brigalow forests. We conclude that carbon and restoration goals are largely congruent within regions of similar climate. At the regional scale however, spatial prioritisation of restoration and carbon projects may only be aligned in areas with higher carbon potential. Given the importance of stem density in determining restoration and carbon potential, an experimental thinning trial was established in dense Brigalow regrowth in southern Queensland (chapter 5). Four treatments were applied in a randomised block design and growth and mortality of a subset of stems was monitored for two years. Data were analysed using mixed-effects models and HBMs and the latter were subsequently used to parameterise an individual-based simulation model of stand structural development and biomass accumulation over 50 years. The main findings of this study were that growth and mortality of stems is influenced by the amount of space available to each stem (a neighbourhood effect) and that thinning accelerates structural development and increases woody species diversity. The examination of neighbourhood effects is taken further by considering drought-related mortality in a Eucalyptus savanna ecosystem (chapter 6). For this work a multi-faceted approach was employed including spatial pattern analyses and statistical models of stem survival to test three competing hypotheses relating to neighbourhood effects on drought related tree mortality. The main finding of this study was that neighbour density and microsite effects both influence drought-related mortality and the observed patterns can readily be explained by an interaction between these two factors. As a whole, this thesis contributes the following scientific insights: (1) restoration and carbon goals may be aligned for naturally regenerating woody ecosystems, but the degree of goal congruence will vary across the landscape in question, (2) while some woody ecosystems retain an excellent capacity to regenerate naturally, the agricultural legacy may still have long term effects on restoration and carbon potential, (3) neighbourhood effects that operate at the stem scale strongly influence dynamics at the ecosystem scale.

Integrationsprojekte sind ein wichtiger Bestandteil einer anpassungsfähigen Informationstechnologie und für einen flexiblen Geschäftsbetrieb unumgänglich. Gerade im Großrechnerbereich besteht ein wachsender Bedarf an Modernisierungsmöglichkeiten für Altanwendungen. Dieser Artikel beleuchtet einen von IBM verfolgten Ansatz zur Modernisierung von Legacy-Anwendungen und diskutiert die nötigen Schritte, um Altanwendungen auf den neusten Stand zu bringen. Das Service Flow Feature (SFF) bietet einen interessanten Ansatz zur Modernisierung von Legacy CICS-Anwendungen (CICS: Customer Information Control System), weil bereits laufende Anwendungen weiterverwendet und in vorhandene Architekturen integriert werden können. Zudem werden bessere Modernisierungsmöglichkeiten bereitgestellt als lediglich die Anpassung der Oberfläche. Hinzu kommt, dass mehrere CICS-Anwendungen aggregiert werden können und die damit erzeugten Geschäftsprozesse über offene Schnittstellen erreichbar sind. Gleichzeitig findet eine Entkopplung der Präsentationslogik von der Anwendungslogik statt. Letzteres bietet dem Entwickler die Möglichkeit, modernere Methoden der Präsentationslogik wie z.B. mittels JSP zu implementieren. Über den Einsatz des CICS SFF in der Entwicklungsumgebung RDz besteht für Firmen kurz- bis mittelfristig die Chance, ihr Reservoire an Legacy CICS-Anwendungen mit relativ wenig Aufwand den modernen IT-Anforderungen anzupassen. / Integration projects are importent elements of a flexible information technology and essential for a flexible business concern. Current discussions show that even in the field of mainframe computing, an increasing need of modernisation possibilities for Legacy applications exist. This article highlights an IBM pursued method to modernize such applications and discusses the necessary steps to make them up-to-date again. The Service Flow Feature delivers an interesting modernization method for Legacy CICS (Customer Information Control System) applications because it reuses and integrates existing applications in available architectures. Furthermore it delivers more possibilities than only modernizing the user interface. In addition, it can aggregate multiple CICS applications, which forms business processes, that are accessible via open interfaces. At the same time, an uncoupling of the presentation logic from the application logic takes place.