Vision studies and visual acuity investigations are an ongoing and progressive field in veterinary ophthalmology. These independent studies all help to contribute to a combined and collective knowledge in our understanding of this truly complex matter. Understanding retinal morphology and physiology is an integral factor in piecing together overall function of the eye. Many of these studies have been done in both medical and veterinary ophthalmology using behavioural factors, electrophysiology, special staining and scanning techniques on a histological level. In the veterinary field many species have been studied pointing out similarities or differences among them. This study hopes to contribute to the understanding of the retinal ultrastructure of the African buffalo (Syncerus caffer). Twenty-five pairs of African buffalo eyes were obtained, but only forty-eight eyes were included in this investigation. The globes of one donor appeared to have chronic intraocular disease and were phthisical. Since this is a descriptive study of normal anatomy and function, these eyes were excluded. Globe dimensions were recorded and statistically analysed, revealing an average horizontal diameter of 32.91mm and a vertical diameter of 33.04mm. The median age of the donor group was 4 years with Using scanning electron microscopy it was established that African buffalo retinas, like other domestic species, have a specialised region a few millimetres dorsolateral to the optic disc, synonymous to the well described area centralis. In this region a higher concentration of cones is found as opposed to other rod-rich regions. In a concurrent investigation, the contralateral globes were processed for immunohistochemical antibody staining. Colour specific anti-bodies were used to identify the cone population present in the African buffalo retina. The conclusion of this investigation reveals that this species like other domestic animals has dichromatic colour vision, recognising short and medium to long colour wavelengths. / Dissertation (MMedVet)--University of Pretoria, 2013. / gm2014 / Companion Animal Clinical Studies / unrestricted

<p> Semiconductor quantum wire (QWR) structure is a promising candidate for potential applications in long wavelength laser devices. In this thesis, the investigations were focused on the growth and characterization on the structural and optical properties of InAs quantum wires deposited on InGaAlAs lattice matched with InP substrate by gas source molecular beam epitaxy. </p> <P> The practical growth parameters were first determined by studying the samples containing single InAs layer embedded within Ino.s3Gll{)_37Alo.10As barrier layers. These parameters were then employed for fabricating multilayer quantum wires with different (1) spacer layer thicknesses; (2) quantum wire layer thicknesses; and (3) different Al concentrations in the spacer/barrier layer materials. </P> <P>Structural properties of the quantum wires were characterized by (scanning) transmission electron microscopy based techniques. The composition variation, elastic field and the variation of QWR stacking patterns in multilayer samples were qualitatively studied through diffraction contrast imaging. Quantification of the In distribution in individual QWRs and the QWR-induced In composition modulation in barrier layers were obtained by electron energy loss spectrometry and energy dispersive X-ray spectrometry, respectively. These experimentally observed structural features were explained through finite element simulations. </P> <P> The optical properties of the QWR structures were studied by photoluminescence. Optical emission at room temperature was achieved from selected multilayer QWR samples after etching and rapid thermal annealing. The emission wavelength ranging from 1.53 to 1.72 μm makes the QWR structure suitable candidates for laser device applications. </P> / Thesis / Doctor of Philosophy (PhD)

This project successfully designed, fabricated and characterized two highly reflective distributed Bragg reflectors for use with long wavelength vertical cavity surface emitting lasers. The first reflector consisted of 20 pairs of alternating lnP/Ino.64Gao.36Aso.777Po.223 layers grown on an InP substrate with a theoretically predicted normal incident reflectivity of 96.6% at a center wavelength of 1550nm. The second DBR had 20 pairs of alternating GaAs/Ino.484Gao.5i6P layers grown on a GaAs substrate with a theoretically predicted reflectivity of 94.9% at a center wavelength of 1550nm for normal incident light. Experimental results obtained using a specially designed reflectivity measurement setup confirmed reflectivity models and predictions at both normal and variable incident light angles. However, these measurements revealed a discrepancy between theoretical and experimental layer thickness values for both DBR structures. Applying perturbations to the theoretical models, the actual layer thicknesses of the DBRs were determined. X-ray analysis was employed to examine the periodicity of the super-lattices along with the accuracy of lattice matching to the substrate. Transmission electron microscopy revealed that no detectable drift in layer thickness was apparent during growth of the DBR structures. Photoluminescence was used to investigate any compositional variations of the quaternary layers in the first DBR stack. / Thesis / Master of Applied Science (MASc)

The field of robotics has advanced to the point where robots are being developed for use in fire environments to perform firefighting tasks. These environments contain varying levels of fire and smoke, both of which obstruct robotic perception sensors. In order to effectively use robots in fire environments, the issue of perception in the presence of smoke and fire needs to be addressed. The goal of this research was to address the problem of perception, specifically rangefinding, in fire smoke environments. A series of tests were performed in fire smoke filled environments to evaluate the performance of different commercial rangefinders and cameras as well as a long-wavelength infrared (LWIR) stereo vision system developed in this research. The smoke was varied from dense, low temperature smoke to light, high temperature smoke for evaluation in a range of conditions. Through small-scale experiments on eleven different sensors, radar and LWIR cameras outperformed other perception sensors within both smoke environments. A LWIR stereo vision system was developed for rangefinding and compared to radar, LIDAR, and visual stereo vision in large-scale testing, demonstrating the ability of LWIR stereo vision to rangefind in dense smoke when LIDAR and visual stereo vision fail. LWIR stereo vision was further developed for improved rangefinding in fire environments. Intensity misalignment between cameras and stereo image filtering were addressed quantitatively. Tests were performed with approximately isothermal scenes and thermally diverse scenes to select subsystem methods. In addition, the effects of image filtering on feature distortion were assessed. Rangefinding improvements were quantified with comparisons to ground truth data. Improved perception in varying levels of clear and smoke conditions was developed through sensor fusion of LWIR stereo vision and a spinning LIDAR. The data were fused in a multi-resolution 3D voxel domain using evidential theory to model occupied and free space states. A heuristic method was presented to separate significantly attenuated LIDAR returns from low-attenuation returns. Sensor models were developed for both return types and LWIR stereo vision. The fusion system was tested in a range of conditions to demonstrate its ability for improved performance over individual sensor use in fire environments. / Ph. D.

Approved for public release; distribution in unlimited. / Silicon Blocked Impurity Band (BIB) detectors are highly efficient, radiation-hardened photodetectors that operate in the range of 5-40 æm. To further extend BIB coverage to 40-350 æm, Ge and GaAs BIB detectors are under development; however, these new detectors face fabrication issues that have delayed their introduction. This thesis will describe the use of a numerical model to examine alternate operating modes for GaAs BIB detectors in order to bypass current fabrication issues. The numerical simulations provide an understanding of the fundamental physics that governs detector transport. The proposed alternatives to standard operation are created by reversing the detector's bias and varying the blocking layer thickness. Modeling indicates that reversing the bias on these detectors provides a larger signal current than standard configurations, while preserving the principal benefits gained from a multilayered device. At the same time, the alternate bias configuration allows for the use of thicker blocking layers, while preserving overall detector responsivity and reducing shot noise. This proposed new model of operation should allow for the relaxation of fabrication constraints without sacrificing the inherent benefits associated with BIB detectors. These devices are of potential interest for missile defense and terahertz surveillance applications. / Lieutenant Commander, United States Navy

Vertical-cavity lasers (VCLs) are of great interest as lightsources for fiber-optic communication systems. Such deviceshave a number of advantages over traditional in-plane laserdiodes, including low power consumption, efficient fibercoupling, on-chip testability, as well as potential low-costfabrication and packaging. To date, GaAs-based VCLs operatingat 850 nm are the technology of choice for short-distance,high-speed data transmission over multimode fiber. Forlong-distance communication networks, long-wavelength (LW) VCLsoperating in the 1.3 and 1.55-&amp;#956m transmission windowsof standard singlemode fibers are desired. However, despiteconsiderable worldwide development efforts, the commercialbreakthrough of such devices has still to be achieved. This ismainly due to shortcomings of the intrinsic material propertiesof InP-based material systems, traditionally employed in LWlaser diodes. While LW quantum well (QW) active regions basedon InP are well established, efficient distributed Braggreflectors (DBRs) are better built up in the AlGaAs/GaAsmaterial system. Therefore, earlier work on LW VCLs has focusedon hybrid techniques such as bonding between InP-based QWs andAlGaAs/GaAs DBRs using waferfusion. More recently, however, themain interest in this field has shifted towards all-epitaxialGaAs-based devices employing novel 1.3-&amp;#956m activematerials with strained GaInNAs QWs as one of the mostpromising candidates. The main focus of this thesis is on the characterization andanalysis of LW VCLs and building blocks thereof, based on bothInP and GaAs substrates. This includes a theoretical study on1.3-&amp;#956m InGaAsP/InP multiple QW active regions, as wellas an experimental investigation of novel, highly strained1.2-&amp;#956m InGaAs/GaAs single QWs. Two high-accuracyabsolute reflectance measurement setups were built for thecharacterization of various DBRs. Reflectance measurementsrevealed that n-type doping is much more detrimental to theperformance of AlGaAs/GaAs DBRs than previously anticipated.Near-room temperature operation of a single-fused1.55-&amp;#956m VCL with an InP/InGaAsP bottom DBR wasobtained. A thermal analysis of this device structure clearlyindicated its limited capabilities in terms of high-temperatureoperation. As a result, further efforts were directed towardsall-epitaxial GaAs-based VCLs. Record-long emission wavelengthsto above 1260 nm were obtained from InGaAs VCLs based on anextensive gain–cavity detuning. These devices showed verypromising performance characteristics in terms of thresholdcurrent and light output power, indicating good potential forbeing a viable alternative to GaInNAs-based VCLs.

<p>Vertical-cavity lasers (VCLs) are of great interest as lightsources for fiber-optic communication systems. Such deviceshave a number of advantages over traditional in-plane laserdiodes, including low power consumption, efficient fibercoupling, on-chip testability, as well as potential low-costfabrication and packaging. To date, GaAs-based VCLs operatingat 850 nm are the technology of choice for short-distance,high-speed data transmission over multimode fiber. Forlong-distance communication networks, long-wavelength (LW) VCLsoperating in the 1.3 and 1.55-&#956m transmission windowsof standard singlemode fibers are desired. However, despiteconsiderable worldwide development efforts, the commercialbreakthrough of such devices has still to be achieved. This ismainly due to shortcomings of the intrinsic material propertiesof InP-based material systems, traditionally employed in LWlaser diodes. While LW quantum well (QW) active regions basedon InP are well established, efficient distributed Braggreflectors (DBRs) are better built up in the AlGaAs/GaAsmaterial system. Therefore, earlier work on LW VCLs has focusedon hybrid techniques such as bonding between InP-based QWs andAlGaAs/GaAs DBRs using waferfusion. More recently, however, themain interest in this field has shifted towards all-epitaxialGaAs-based devices employing novel 1.3-&#956m activematerials with strained GaInNAs QWs as one of the mostpromising candidates.</p><p>The main focus of this thesis is on the characterization andanalysis of LW VCLs and building blocks thereof, based on bothInP and GaAs substrates. This includes a theoretical study on1.3-&#956m InGaAsP/InP multiple QW active regions, as wellas an experimental investigation of novel, highly strained1.2-&#956m InGaAs/GaAs single QWs. Two high-accuracyabsolute reflectance measurement setups were built for thecharacterization of various DBRs. Reflectance measurementsrevealed that n-type doping is much more detrimental to theperformance of AlGaAs/GaAs DBRs than previously anticipated.Near-room temperature operation of a single-fused1.55-&#956m VCL with an InP/InGaAsP bottom DBR wasobtained. A thermal analysis of this device structure clearlyindicated its limited capabilities in terms of high-temperatureoperation. As a result, further efforts were directed towardsall-epitaxial GaAs-based VCLs. Record-long emission wavelengthsto above 1260 nm were obtained from InGaAs VCLs based on anextensive gain–cavity detuning. These devices showed verypromising performance characteristics in terms of thresholdcurrent and light output power, indicating good potential forbeing a viable alternative to GaInNAs-based VCLs.</p>

Thermography is a non-destructive technique which uses infrared radiation to obtain the temperature distribution of an object. The technique is increasingly used in the pulp and paper industry. To convert the detected infrared radiation to a temperature, the emittance of the material must be known. For several influencing parameters the emittance of paper and board has not previously been studied in detail. This is partly due to the lack of emittance measurement methods that allow for studying the influence of these parameters. An angle-resolved goniometric method for measuring the infrared emittance of a material was developed in this thesis. The method is based on the reference emitter methodology, and uses commercial infrared cameras to determine the emittance. The method was applied to study the dependence on wavelength range, temperature, observation angle, moisture ratio, sample composition, and sample structure of the emittance of paper and board samples. It was found that the emittance varied significantly with wavelength range, observation angle and moisture ratio. The emittance was significantly higher in the LWIR (Long-Wavelength Infrared) range than in the MWIR (Mid-Wavelength Infrared) range. The emittance was approximately constant up to an observation angle of 60° in the MWIR range and 70° in the LWIR range, respectively. After that it started to decrease. The emittance of moist samples was significantly higher than that of dry samples. The influence of moisture ratio on the emittance could be estimated based on the moisture ratio of the sample, and the emittance of pure water and dry material, respectively. The applicability of measured emittance values was demonstrated in an investigation of the mechanical properties of sack paper samples. An infrared camera was applied to monitor the generation of heat during a tensile test of a paper sample. It was found that the observed increase in thermal energy at the time of rupture corresponded well to the value of the elastic energy stored in the sample just prior to rupture. The measured emittance value provided an increased accuracy in the thermal energy calculation based on the infrared images. / <p>QC 20121121</p>

Tesis por compendio / [EN] Phononic crystals are artificial materials formed by a periodic arrangement of inclusions embedded into a host medium, where each of them can be solid or fluid. By controlling the geometry and the impedance contrast of its constituent materials, one can control the dispersive properties of waves, giving rise to a huge variety of interesting and fundamental phenomena in the context of wave propagation. When a propagating wave encounters a medium with different physical properties it can be transmitted and reflected in lossless media, but also absorbed if dissipation is taken into account. These fundamental phenomena have been classically explained in the context of homogeneous media, but it has been a subject of increasing interest in the context of periodic structures in recent years as well. This thesis is devoted to the study of different effects found in sonic and phononic crystals associated with transmission, reflection and absorption of waves, as well as the development of a technique for the characterization of its dispersive properties, described by the band structure. We start discussing the control of wave propagation in transmission in conservative systems. Specifically, our interest is to show how sonic crystals can modify the spatial dispersion of propagating waves leading to control the diffractive broadening of sound beams. Making use of the spatial dispersion curves extracted from the analysis of the band structure, we first predict zero and negative diffraction of waves at frequencies close to the band-edge, resulting in collimation and focusing of sound beams in and behind a 3D sonic crystal, and later demonstrate it through experimental measurements. The focusing efficiency of a 3D sonic crystal is limited due to the strong scattering inside the crystal, characteristic of the diffraction regime. To overcome this limitation we consider axisymmetric structures working in the long wavelength regime, as a gradient index lens. In this regime, the scattering is strongly reduced and, in an axisymmetric configuration, the symmetry matching with acoustic sources radiating sound beams increase its efficiency dramatically. Moreover, the homogenization theory can be used to model the structure as an effective medium with effective physical properties, allowing the study of the wave front profile in terms of refraction. We will show the model, design and characterization of an efficient focusing device based on these concepts. Consider now a periodic structure in which one of the parameters of the lattice, such as the lattice constant or the filling fraction, gradually changes along the propagation direction. Chirped crystals represent this concept and are used here to demonstrate a novel mechanism of sound wave enhancement based on a phenomenon known as "soft" reflection. The enhancement is related to a progressive slowing down of the wave as it propagates along the material, which is associated with the group velocity of the local dispersion relation at the planes of the crystal. A model based on the coupled mode theory is proposed to predict and interpret this effect. Two different phenomena are observed here when dealing with dissipation in periodic structures. On one hand, when considering the propagation of in-plane sound waves in a periodic array of absorbing layers, an anomalous decrease in the absorption, combined with a simultaneous increase of reflection and transmission at Bragg frequencies is observed, in contrast to the usual decrease of transmission, characteristic in conservative periodic systems at these frequencies. For a similar layered media, backed now by a rigid reflector, out-of-plane waves impinging the structure from a homogeneous medium will increase dramatically the interaction strength. In other words, the time delay of sound waves inside the periodic system will be considerably increased resulting in an enhanced absorption, for a broadband spectral range. / [ES] Los cristales fonónicos son materiales artificiales formados por una disposición periódica de inclusiones en un medio, pudiendo ambos ser de carácter sólido o fluido. Controlando la geometría y el contraste de impedancias entre los materiales constituyentes se pueden controlar las propiedades dispersivas de las ondas. Cuando una onda propagante se encuentra un medio con diferentes propiedades físicas puede ser transmitida y reflejada, en medios sin pérdidas, pero también absorbida, si la disipación es tenida en cuenta. La presente tesis está dedicada al estudio de diferentes efectos presentes en cristales sónicos y fonónicos relacionados con la transmisión, reflexión y absorción de ondas, así como el desarrollo de una técnica para la caracterización de sus propiedades dispersivas, descritas por la estructura de bandas. En primer lugar, se estudia el control de la propagación de ondas en transmisión en sistemas conservativos. Específicamente, nuestro interés se centra en mostrar cómo los cristales sónicos son capaces de modificar la dispersión espacial de las ondas propagantes, dando lugar al control del ensanchamiento de haces de sonido. Haciendo uso de las curvas de dispersión espacial extraídas del análisis de la estructura de bandas, se predice primero la difracción nula y negativa de ondas a frecuencias cercanas al borde de la banda, resultando en la colimación y focalización de haces acústicos en el interior y detrás de un cristal sónico 3D, y posteriormente se demuestra mediante medidas experimentales. La eficiencia de focalización de un cristal sónico 3D está limitada debido a las múltiples reflexiones existentes en el interior del cristal. Para superar esta limitación se consideran estructuras axisimétricas trabajando en el régimen de longitud de onda larga, como lentes de gradiente de índice. En este régimen, las reflexiones internas se reducen fuertemente y, en configuración axisimétrica, la adaptación de simetría con fuentes acústicas radiando haces de sonido incrementa la eficiencia drásticamente. Además, la teoría de homogenización puede ser empleada para modelar la estructura como un medio efectivo con propiedades físicas efectivas, permitiendo el estudio del frente de ondas en términos refractivos. Se mostrará el modelado, diseño y caracterización de un dispositivo de focalización eficiente basado en los conceptos anteriores. Considérese ahora una estructura periódica en la que uno de los parámetros de la red, sea el paso de red o el factor de llenado, cambia gradualmente a lo largo de la dirección de propagación. Los cristales chirp representan este concepto y son empleados aquí para demostrar un mecanismo novedoso de incremento de la intensidad de la onda sonora basado en un fenómeno conocido como reflexión "suave". Este incremento está relacionado con una ralentización progresiva de la onda conforme se propaga a través del material, asociado con la velocidad de grupo de la relación de dispersión local en los planos del cristal. Un modelo basado en la teoría de modos acoplados es propuesto para predecir e interpretar este efecto. Se observan dos fenómenos diferentes al considerar pérdidas en estructuras periódicas. Por un lado, si se considera la propagación de ondas sonoras en un array periódico de capas absorbentes, cuyo frente de ondas es paralelo a los planos del cristal, se produce una reducción anómala en la absorción combinada con un incremento simultáneo de la reflexión y transmisión a las frecuencias de Bragg, de forma contraria a la habitual reducción de la transmisión, característica de sistemas periódicos conservativos a estas frecuencias. En el caso de la misma estructura laminada en la que se cubre uno de sus lados mediante un reflector rígido, la incidencia de ondas sonoras desde un medio homogéneo, cuyo frente de ondas es perpendicular a los planos del cristal, produce un gran incremento de la fuerza de / [CA] Els cristalls fonònics són materials artificials formats per una disposició d'inclusions en un medi, ambdós poden ser sòlids o fluids. Controlant la geometría i el contrast d'impedàncies dels seus materials constituents, és poden controlar les propietats dispersives de les ondes, permetent una gran varietatde fenòmens fonamentals interessants en el context de la propagació d'ones. Quan una ona propagant troba un medi amb pèrdues amb propietats físiques diferents es pot transmetre i reflectir, però també absorbida si la dissipació es té en compte. Aquests fenòmens fonamentals s'han explicat clàssicament en el context de medis homogenis, però també ha sigut un tema de creixent interés en el context d'estructures periòdiques en els últims anys. Aquesta tesi doctoral tracta de l'estudi de diferents efectes en cristalls fonònics i sònics lligats a la transmissió, reflexió i absorció d'ones, així com del desenvolupament d'una tècnica de caracterització de les propietats dispersives, descrites mitjançant la estructura de bandes. En primer lloc, s'estudia el control de la propagació ondulatori en transmissió en sistemes conservatius. Més específicament, el nostre interés és mostrar com els cristalls sonors poden modificar la dispersió espacial d'ones propagants donant lloc al control de l'amplària per difracció dels feixos sonors. Mitjançant les corbes dispersió espacial obtingudes de l'anàlisi de l'estructura de bandes, es prediu, en primer lloc, la difracció d'ones zero i negativa a freqüències próximes al final de banda. El resultat és la collimació i focalització de feixos sonors dins i darrere de cristalls de so. Després es mostra amb mesures experimentals. L'eficiència de focalització d'un cristall de so 3D està limitada per la gran dispersió d'ones dins del cristall, que és característic del règim difractiu. Per a superar aquesta limitació, estructures axisimètriques que treballen en el règim de llargues longituds d'ona, i es comporten com a lents de gradient d'índex. En aquest règim, la dispersió es redueix enormement i, en una configuració axisimètrica, a causa de l'acoblament de la simetría amb les fonts acústiques que radien feixos sonors, l'eficiència de radiació s'incrementa significativament. D'altra banda, la teoria d'homogeneïtzació es pot utilitzar per a modelar, dissenyar i caracteritzar un dispositiu eficient de focalització basat en aquests conceptes. Considerem ara una estructura periòdica en la qual un dels seus paràmetres de xarxa, com ara la constant de xarxa o el factor d'ompliment canvia gradualment al llarg de la direcció de propagació. Els cristalls chirped representen aquest concepte i s'utilitzen ací per a demostrar un mecanisme nou d'intensificació d'ones sonores basat en el fenòmen conegut com a reflexió "suau". La intensificació està relacionada amb la alentiment progressiva de l'ona conforme propaga al llarg del material, que està associada amb la velocitat de grup de la relació de dispersió local en els diferents plànols del cristall. Es proposa un model basat en la teoria de modes acoblats per a predir i interpretar este efecte. Dos fenòmens diferents cal destacar quan es tracta d'estructures periòdiques amb dissipació. Per un costat, al considerar la propagació d'ones sonores en el plànol en un array periòdic de capes absorbents, s'observa una disminució anòmala de l'absorció i es combina amb un augment simultani de reflexió i transmissió en les freqüències de Bragg que contrasta amb la usual disminució de transmissió, característica dels sistemes conservatius a eixes freqüències. Per a un medi similar de capes, amb un reflector rígid darrere, les ones fora del pla incidint l'estructura des de un medi homogeni, augmentaran considerablement la interacció. En altres paraules, el retràs temporal de les ones sonores dins del sistema periòdic augmentarà significativament produint un augmen / Cebrecos Ruiz, A. (2015). Transmission, reflection and absorption in Sonic and Phononic Crystals [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/56463 / Premios Extraordinarios de tesis doctorales / Compendio