O transporte aéreo e a indústria de sistemas de defesa foram setores pioneiros na utilização de sistemas computacionais críticos, incrementando os níveis de automação nas atividades de controle do espaço aéreo. Com o crescimento desses setores, verificado pela expansão dos números de vôos, volumes de cargas e usuários, assim como pela ampliação e diversidade das operações militares, os sistemas de controle têm assumido maior complexidade técnica, introduzindo novos recursos de automação ou facilidades adicionais de apoio para funções exercidas manualmente. Essa situação tem ampliado a dependência dos serviços prestados, relativamente à disponibilidade dos sistemas computacionais. Diretrizes de projeto e procedimentos operacionais são estabelecidos para manter os níveis de segurança nos casos de falha, no entanto a disponibilidade torna-se parâmetro crítico, na medida em que algumas falhas podem afetar a eficiência nominal da prestação dos serviços. Nesse cenário, este trabalho propõe um modelo para avaliação da disponibilidade de sistemas de controle do espaço aéreo, a partir de recursos de análises da teoria de filas. Inicialmente é citado um modelo geral para análise de disponibilidade de data centers. Em seguida, é apresentada uma extensão do modelo geral para análise da disponibilidade em sistemas de controle do espaço aéreo. Para isso, considerou-se a intervenção humana existente nessa atividade, cujas decisões de controle são exercidas por operadores qualificados (controladores), tanto nas atividades inerentes ao serviço de controle, quanto nos casos de degradação, nos quais os operadores ou técnicos de manutenção assumem alguma tarefa de reparo, decorrente da eventual indisponibilidade de funções do sistema. / Due to the growth in airspace utilization, which can be verified both in terms of the expansions in aerial movements, airports and volumes of transported passengers and cargo, as well as in terms of the expansion of military operations demands and diversity, airspace control activities have been increasing their technical complexity, introducing new features into the existent automation systems or creating additional resources for the automation of some functions previously performed by human operators. This situation has increased the dependence on the availability of the computer systems involved in the services provided by control centers. Project directives and operational procedures are established in order to maintain the safety integrity levels of the systems, in case any failure occurs. However, the availability becomes a critical parameter, once failure events can force an undesirable state of degraded operation, jeopardizing the nominal capacity of the services being performed through any controlled airspace. In this scenario, this work presents an availability model for the computer systems used in airspace control centers, based on analysis from queuing theory. A general model is first presented, referencing a case study that describes the use of queuing models to access the availability of generic data centers. Further considerations are introduced to extend this general model in order to propose its application for the specific computer systems used in airspace control centers, where operational control relies on human activities. In this case, system operation involves intensive use of human-machine interfaces (HMI), for the regular control services provided, and additional technical or operational maintenance activities, occasionally imposed to repair a momentary loss of any function of the system.

O plano de bacias e o relatório de situação são considerados instrumentos estratégicos para o gerenciamento de recursos hídricos nas bacias hidrográficas do Estado de São Paulo. Contudo, sua efetivação tem sido alvo de muitas críticas, que partem, até mesmo, de representantes dos Comitês. Tais críticas centram-se, principalmente, em dois aspectos, quais sejam: as limitações técnicas dos mesmos para embasar a produção de documentos norteadores de práticas plenamente sustentáveis em termos sócio-ambientais, assim como os obstáculos políticos quanto à capacidade de incitar a efetivação de uma gestão democrática em todas as fases do processo, o que envolveria outras instâncias do sistema de gerenciamento de recursos hídricos. Diante disso, o presente trabalho visa investigar a pertinência dessas críticas, partindo da hipótese de que o tempo de existência do Comitê pode estar diretamente relacionado tanto com a percepção dos problemas relacionados aos diversos usos da água, quanto à sua caracterização como instância política representativa de diferentes usuários. A fim de propiciar uma reflexão sociológica sobre a questão, fez-se uma pesquisa de campo a partir do caso de dois diferentes Comitês de Bacias atuantes no estado de São Paulo. Ao final, podemos constatar que parte de nossas percepções foi confirmada e parte não, sustentando a hipótese de que os comitês estruturados mais cedo foram aqueles onde os problemas relacionados aos recursos hídricos eram mais evidentes na região - como é o caso da bacia dos rios PCJ. No entanto, o tempo de existência de um comitê não pode caracterizá-lo como instância política representante dos interesses dos diversos usuários que dele fazem parte, pois os problemas com relação ao processo de elaboração do Relatório de situação e do plano de bacia, embora em proporções diferenciadas, existem e são comuns em todos os colegiados regionais, independentemente do seu tempo de atuação junto ao sistema de gestão hídrico. / The Basins Plan and the Situation Report are strategic instruments for the administration of hydric resources in the hydrographic basins in São Paulo State. However, their implantation have been receiving criticisms even from the representatives of the Committees. Such criticisms are mainly focused in two aspects, which are, the technical limitations of the same ones to base the production of documents which are orientation of practices fully maintainable in socio-environmental terms, and the political obstacles for the implantation of a democratic administration in all phases of the process, what would involve other authorities of the Hydric Resources Administration System. Due to the above mentioned, the present work seeks to investigate the pertinence of those criticisms, starting from the hypothesis that the time of existence of the Committee can be directly related to the perception of the problems related to the several uses of the water, as well as its characterization as representative political authority of different users. In order to propitiate a sociological reflection on the subject, it make a research on field starting from the case of two different Committees of Basins in São Paulo state. Finally, we can verify that, part of our perceptions was true, sustaining the hypothesis that earlier structured committees were those where the problems related to hidric resources were more evident in the area - as in the case of the basin of therivers PCJ. However, the time of existence of a committee cannot characterize it as a representative political authority of the different users that are part of it, because there are problems in the process of elaboration of the Situation Report and of the Basins Plan, although in different proportions, and they are common in all the regional committees, independently of its time of participation at Hydric Resources Administration System.

O transporte aéreo e a indústria de sistemas de defesa foram setores pioneiros na utilização de sistemas computacionais críticos, incrementando os níveis de automação nas atividades de controle do espaço aéreo. Com o crescimento desses setores, verificado pela expansão dos números de vôos, volumes de cargas e usuários, assim como pela ampliação e diversidade das operações militares, os sistemas de controle têm assumido maior complexidade técnica, introduzindo novos recursos de automação ou facilidades adicionais de apoio para funções exercidas manualmente. Essa situação tem ampliado a dependência dos serviços prestados, relativamente à disponibilidade dos sistemas computacionais. Diretrizes de projeto e procedimentos operacionais são estabelecidos para manter os níveis de segurança nos casos de falha, no entanto a disponibilidade torna-se parâmetro crítico, na medida em que algumas falhas podem afetar a eficiência nominal da prestação dos serviços. Nesse cenário, este trabalho propõe um modelo para avaliação da disponibilidade de sistemas de controle do espaço aéreo, a partir de recursos de análises da teoria de filas. Inicialmente é citado um modelo geral para análise de disponibilidade de data centers. Em seguida, é apresentada uma extensão do modelo geral para análise da disponibilidade em sistemas de controle do espaço aéreo. Para isso, considerou-se a intervenção humana existente nessa atividade, cujas decisões de controle são exercidas por operadores qualificados (controladores), tanto nas atividades inerentes ao serviço de controle, quanto nos casos de degradação, nos quais os operadores ou técnicos de manutenção assumem alguma tarefa de reparo, decorrente da eventual indisponibilidade de funções do sistema. / Due to the growth in airspace utilization, which can be verified both in terms of the expansions in aerial movements, airports and volumes of transported passengers and cargo, as well as in terms of the expansion of military operations demands and diversity, airspace control activities have been increasing their technical complexity, introducing new features into the existent automation systems or creating additional resources for the automation of some functions previously performed by human operators. This situation has increased the dependence on the availability of the computer systems involved in the services provided by control centers. Project directives and operational procedures are established in order to maintain the safety integrity levels of the systems, in case any failure occurs. However, the availability becomes a critical parameter, once failure events can force an undesirable state of degraded operation, jeopardizing the nominal capacity of the services being performed through any controlled airspace. In this scenario, this work presents an availability model for the computer systems used in airspace control centers, based on analysis from queuing theory. A general model is first presented, referencing a case study that describes the use of queuing models to access the availability of generic data centers. Further considerations are introduced to extend this general model in order to propose its application for the specific computer systems used in airspace control centers, where operational control relies on human activities. In this case, system operation involves intensive use of human-machine interfaces (HMI), for the regular control services provided, and additional technical or operational maintenance activities, occasionally imposed to repair a momentary loss of any function of the system.

Software testing is widely considered to be one of the most important parts of software development life-cycle. In this research, we investigated potential improvements in the testing process and design of automated test scripts inside Bombardier Transportation. For the creation of automated test scripts BT is using a group of programs called TAF (Test Automation Framework). These scripts are used for testing Train Control Management System (TCMS), software that is used for managing the train. TAF can export its test scripts in XML format. XML scripts are analyzed in order to identify the most frequent changes. To better understand the life cycle of automated Test scripts official documentation that defines the Verification and Validation process inside BT was analyzed. Also, an interview was conducted with one of the responsible persons for testing. We believe that we have found a possible solution for improving testing process and creation of automated test scripts in BT, and to evaluate it proof of concept tool was developed. The main idea behind the tool is to write the test script using keywords which are based on analysis that was conducted on test specification documentation. These keywords represent frequent actions that are being tested on the train. By storing those actions in keywords re-usability of test script is being increased. Also, because they are based on naturally language, they are having positive effect on readability and maintenance of the test script.

Organizations are expected by their shareholders to continually deliver above industry returns on capital invested and to remain competitive in the industry of choice through productivity, safety and quality. The maintenance function is a key area in which competitiveness through efficiencies and world–class performance can be attained by focusing on the prevention and reduction of long and costly equipment repair times. The question is: how can the mean time to repair of equipment already installed in the plant be reduced? To answer the above question correctly and comprehensively, the research explored mixed methods in finding answers. Quantitative methodology using a survey was used for data collection. Observations and interviews were held with maintenance personnel to uncover information that couldn’t have been obtained by means of a survey. The survey was limited to equipment performance measures, human factors, environmental factors, planning, spare parts, maintainability, procedures and training. To test consistency and accuracy of representation of the total population under study, a reliability test was done by using Cronbach’s alpha coefficient. To determine whether there are any differences between groups, an ANOVA test was used. Cohen’s d–value was used to determine practically significant differences between one set of data with another and correlation analysis was used to determine the relationships between the variables. The approach designed and delivered by this research flowed from the existing body of knowledge, case studies and survey findings. The approach adopts some of the elements of the failure mode and effects analysis (FMEA) procedure and differs from other work that has been done by others by taking into account the competency and experience of maintenance personnel and assigning to them factors which are used to compute anew MTTR of the equipment. The cost of implementing the recommended corrective actions for realising the new MTTR is determined and evaluated against an improved equipment availability that will be achieved as a result of the recommended corrective actions assuming that the failure rate of the equipment remains constant. This evaluation step imbedded within the approach is valuable for the maintenance function and management for decision making in ensuring that resources at the organization’s disposal are used productively. Validation and test results of the approach showed that the MTTR of equipment installed in the plant can be reduced. The results also indicated that through the use of the designed approach a regular pattern of repair or replacement times can be followed well in advance and that it is practical, user friendly and it also delivers on its objective of offering a structure for analysis and decision making aimed at reducing the MTTR. Included with this dissertation is feedback information that can be included in a maintenance job card feedback section to capture information about factors that can be improved to lower the MTTR as part of a continuous improvement process. Included also is a spare part development and management procedure that can be used by the maintenance function. Recommendations on training of maintenance personnel on the maintainability of equipment, the FMEA procedure and maintenance procedures are highlighted. Information that flowed from this approach will be valuable for continuous plant performance improvement and during the design, installation and operation stages of a blast furnace. / Thesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2012.

Organizations are expected by their shareholders to continually deliver above industry returns on capital invested and to remain competitive in the industry of choice through productivity, safety and quality. The maintenance function is a key area in which competitiveness through efficiencies and world–class performance can be attained by focusing on the prevention and reduction of long and costly equipment repair times. The question is: how can the mean time to repair of equipment already installed in the plant be reduced? To answer the above question correctly and comprehensively, the research explored mixed methods in finding answers. Quantitative methodology using a survey was used for data collection. Observations and interviews were held with maintenance personnel to uncover information that couldn’t have been obtained by means of a survey. The survey was limited to equipment performance measures, human factors, environmental factors, planning, spare parts, maintainability, procedures and training. To test consistency and accuracy of representation of the total population under study, a reliability test was done by using Cronbach’s alpha coefficient. To determine whether there are any differences between groups, an ANOVA test was used. Cohen’s d–value was used to determine practically significant differences between one set of data with another and correlation analysis was used to determine the relationships between the variables. The approach designed and delivered by this research flowed from the existing body of knowledge, case studies and survey findings. The approach adopts some of the elements of the failure mode and effects analysis (FMEA) procedure and differs from other work that has been done by others by taking into account the competency and experience of maintenance personnel and assigning to them factors which are used to compute anew MTTR of the equipment. The cost of implementing the recommended corrective actions for realising the new MTTR is determined and evaluated against an improved equipment availability that will be achieved as a result of the recommended corrective actions assuming that the failure rate of the equipment remains constant. This evaluation step imbedded within the approach is valuable for the maintenance function and management for decision making in ensuring that resources at the organization’s disposal are used productively. Validation and test results of the approach showed that the MTTR of equipment installed in the plant can be reduced. The results also indicated that through the use of the designed approach a regular pattern of repair or replacement times can be followed well in advance and that it is practical, user friendly and it also delivers on its objective of offering a structure for analysis and decision making aimed at reducing the MTTR. Included with this dissertation is feedback information that can be included in a maintenance job card feedback section to capture information about factors that can be improved to lower the MTTR as part of a continuous improvement process. Included also is a spare part development and management procedure that can be used by the maintenance function. Recommendations on training of maintenance personnel on the maintainability of equipment, the FMEA procedure and maintenance procedures are highlighted. Information that flowed from this approach will be valuable for continuous plant performance improvement and during the design, installation and operation stages of a blast furnace. / Thesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2012.

This research explores the barriers and limitations of the interaction between building development processes in an attempt of an integrated decision support approach to improve building design for effective maintenance in the field of office building automation. Extensive coverage of literature and practice in office building industry over the last two decades indicates a wide diffusion and application of the information and communication technologies (ICT). While this has resulted in the adoption of advanced system integration in buildings, system redundancy and excessive expenditures are causing a major impact on the overall efficiency and has burdened building owners and occupiers with escalating maintenance costs. This phenomenon stimulates and warrants the re-examination of integrated building development, not just on system integration but also on the interdisciplinary development process integration particularly linking design and maintenance. Studies in this field revealed existing problems such as the inherent professional fragmentation, lack of historical information and service data, the first cost mentality of owners and developers, difficulties in forecasting future conditions and changes early in the design stage. With extensive use of qualitative information, this situation presents a great potential for the development of a decision support system exploring the communication and integration of design and maintenance phases, which has been one of the primary objectives of this research. In addition to literature studies, a questionnaire survey and a case study to identify industry concerns, feasible solutions, and practical procedure oriented approaches through knowledge extractions were carried out. A set of guidelines, a checklist for its implementation and prototype system for computerized decision support to design and maintenance of building automation systems were also produced. These strategic approaches to balance design and maintenance will help facilitate appropriate decision making in the early design stage for sustainable maintenance of buildings.

Syfte:Syftet med studien är att undersöka vilka faktorer som påverkar projektering av en järnvägsanläggning ur ett livscykelperspektiv. Målet är att tydliggöra vad Trafikverket behöver ta hänsyn till vid projektering av en järnvägsanläggning för att kunna uppnå de krav som ställs på järnvägsanläggningen samt öka förutsägbarheten för livscykelkostnaden. Frågeställningar:Hur kan projektering av järnvägsanläggningar förbättras ur ett livscykelperspektiv? Vilka faktorer behöver Trafikverket ta hänsyn till vid projekteringsfasen för att säkerställa tillförlitliga och kostnadseffektiva järnvägsanläggningar? Hur kan en arbetsmetodik formas för att främja en kostnadseffektiv järnvägsanläggning? Metod:Följande studie är baserad på en kvalitativ fallstudie. Metoden är baserad på semistrukturerade intervjuer och dokumentationsmetodik för att erhålla empiriska data. Litteraturstudien och det teoretiska ramverket är baserade på expertgranskade tidskrifter, vetenskapliga artiklar och böcker som täcker studieområdena. Slutsats:Studien har visat att projektering av järnvägsanläggningar ur ett livscykelperspektiv kan förbättras genom att ta fram konkreta underlag för att stödja de besluts som ska tas. Beslutsunderlag för järnvägsanläggningen bör baseras på olika analyser för att kunna värdera vilket alternativ som ger den mest kostnadseffektiva anläggningen samtidigt som det återspeglar de efterfrågade målen och kraven. Analyser ska inte enbart baseras på tekniska konstruktion utan även driften samt underhållet behöver beaktas eftersom de har en stor inverkan på utfallet av kapaciteten, prestandan och kostnader över hela anläggningens livscykel. Vidare har studien visat vikten av att ha tillförlitliga system som kan ge information om anläggningen och även all data som krävs för att utföra analyser. / Purpose:The purpose of the study is to investigate which factors affect life-cycle planning of a railway infrastructure. The aim is to clarify what the Swedish Transport Administration needs to take into account when planning a railway infrastructure in the future in order to meet the requirements and increase the predictability of life-cycle costs. Research questions:How can railway infrastructure planning phase be improved based on a life-cycle perspective? What factors do the Swedish Transport Administration need to take into account during the planning phase to ensure reliable and cost-effective railway infrastructure? How can a working methodology be designed to promote a cost-effective railway infrastructure? Method:The following study is based on a qualitative case study. The literature study and the theoretical framework are based on peer-reviewed journals, scientific articles and books that covers the areas of the study. The empirical data collection is based on semi-structured interviews and reports from different administrative authority. Conclusion:This study has shown that planning of railway infrastructure from a life-cycle perspective can be improved by concrete evidence to support the decisions to be taken. The decisions basis for the railway infrastructure should be based on various analysis in order to evaluate the most cost-effective option while reflecting the desired goals and requirements. However, analysis should not only be based on the technical design. It should also consider operation and maintenance, since they have a major impact on the outcome of capacity, performance and cost throughout the life-cycle of railway infrastructure. Furthermore, the study has demonstrated the importance of having reliable systems that can provide information about the railway infrastructure and all data required for carrying out analysis.

Syfte: Syftet med studien är att undersöka vilka faktorer som påverkar projektering av en järnvägsanläggning ur ett livscykelperspektiv. Målet är att tydliggöra vad Trafikverket behöver ta hänsyn till vid projektering av en järnvägsanläggning Syftet med studien är att undersöka vilka faktorer som påverkar projekteringen av järnvägsanläggningar utifrån ett Life Cycle Managementlångsiktigt hållbarhetsperspektiv perspektiv med fokus en centralpunkt inom på Integrated Logistic Support. Med detta avser studien att ge förslag på för atthur organisationen kunnakan uppnå långsiktiga lönsamhetsmål de krav som ställs på järnvägsanläggningen samt öka förutsägbarheten för livscykelkostnaden. Frågeställningar: Hur kan projektering av järnvägsanläggningar förbättras ur ett långsiktigtlivscykel perspektiv? Vilka faktorer behöver Trafikverket ta hänsyn till vid projekteringsfasen för att säkerställa tillförlitliga och kostnadseffektiva järnvägsanläggningar? Hur kan en arbetsmetodik formas för att främja en kostnadseffektiv järnvägsanläggning? Metod: Följande studie är baserad på en kvalitativ fallstudie av Trafikverket. Metoden är baserad på semistrukturerade intervjuer och dokumentationsmetodik för att erhålla empiriska data. Litteraturstudien och det teoretiska ramverket är baserade på expertgranskade tidskrifter, vetenskapliga artiklar och böcker som täcker studieområdena. Slutsats: Studien har visat att projektering av järnvägsanläggningar ur ett livscykelperspektiv kan förbättras genom att ta fram konkreta underlag för stödja de besluts som ska tas. Beslutsunderlag för järnvägsanläggningen bör baseras på olika analyser för att kunna värdera vilket alternativ som ger den mest kostnadseffektiva anläggningen samtidigt som det återspeglar de efterfrågade målen och kraven. Analyser ska inte enbart baseras på tekniska konstruktion utan även driften samt underhållet behöver beaktas eftersom de har en stor inverkan på utfallet av kapaciteten, prestandan samt kostnaderna över hela anläggningens livscykel. Vidare har studien visat vikten av att ha tillförlitliga system som kan ge information om anläggningen och även all data som krävs för att utföra analyser. / Purpose: The purpose of the study is to investigate which factors affect the longlife cycle-term planning of a railway infrastructure. The aim is to clarify what the Swedish Transport Administration needs to take into account when planning a railway infrastructure in the future in order to meet the requirements and increase the predictability of life cycle costs. Research questions: How can railway infrastructure planning phase be improved based on a life cycle long-term perspective? What factors do the Swedish Transport Administration need to take into account during the planning phase to ensure reliable and cost-effective railway infrastructure? How can a working methodology be designed to promote a cost-effective railway facility? Method: The following study is based on a qualitative case study of Swedish Transport Administration. The literature study and the theoretical framework are based on peer-previewed journals, scientific articles and books that covers the areas of the study. The empirical data collection is based on semi-structured interviews and reports from different administrative authority. Conclusion: This study has shown that planning of railway infrastructure from a life cycle perspective can be improved by concrete evidence to support the decisions to be taken. The decisions basis for the railway infrastructure should be based on various analysis in order to evaluate the most cost-effective option while reflecting the desired goals and requirements. However, analysis should not only be based on the technical design. It should also consider operation and maintenance, since they have a major impact on the outcome of capacity, performance and cost throughout the life cycle of the railway infrastructure. Furthermore, the study has demonstrated the importance of having reliable systems that can provide information about the railway infrastructure and all data required for carrying out analysis.

Sammanfattning Datum: 2018-05-31 Nivå: Examensarbete i Industriell ekonomi, 30 ECTS Institution: Akademin för Ekonomi, Samhälle och Teknik, EST, Mälardalens Högskola Författare: Elias Kirilmaz & Jennifer Quach Titel: Projektering av en järnvägsanläggning ur ett livscykelperspektiv: En fallstudie om hur infrastrukturförvaltare kan förbättra projektering av stora tekniska system med fokus på livscykelperspektivet Nyckelord: Project, Life Cycle Cost, Railway, Reliability, Availability, Maintainability, Integrated logistic support, ILS, Asset Management, Long-termLarge technical systems, LTS Handledare: Pär Blomkvist & Christian Johansson Norbäck Syfte: Syftet med studien är att undersöka vilka faktorer som påverkar projektering av en järnvägsanläggning ur ett livscykelperspektiv. Målet är att tydliggöra vad Trafikverket behöver ta hänsyn till vid projektering av en järnvägsanläggning Syftet med studien är att undersöka vilka faktorer som påverkar projekteringen av järnvägsanläggningar utifrån ett Life Cycle Managementlångsiktigt hållbarhetsperspektiv perspektiv med fokus en centralpunkt inom på Integrated Logistic Support. Med detta avser studien att ge förslag på för atthur organisationen kunnakan uppnå långsiktiga lönsamhetsmål de krav som ställs på järnvägsanläggningen samt öka förutsägbarheten för livscykelkostnaden. Frågeställningar: Hur kan projektering av järnvägsanläggningar förbättras ur ett långsiktigtlivscykel perspektiv? Vilka faktorer behöver Trafikverket ta hänsyn till vid projekteringsfasen för att säkerställa tillförlitliga och kostnadseffektiva järnvägsanläggningar? Hur kan en arbetsmetodik formas för att främja en kostnadseffektiv järnvägsanläggning? Metod: Följande studie är baserad på en kvalitativ fallstudie av Trafikverket. Metoden är baserad på semistrukturerade intervjuer och dokumentationsmetodik för att erhålla empiriska data. Litteraturstudien och det teoretiska ramverket är baserade på expertgranskade tidskrifter, vetenskapliga artiklar och böcker som täcker studieområdena. Slutsats: Studien har visat att projektering av järnvägsanläggningar ur ett livscykelperspektiv kan förbättras genom att ta fram konkreta underlag för stödja de besluts som ska tas. Beslutsunderlag för järnvägsanläggningen bör baseras på olika analyser för att kunna värdera vilket alternativ som ger den mest kostnadseffektiva anläggningen samtidigt som det återspeglar de efterfrågade målen och kraven. Analyser ska inte enbart baseras på tekniska konstruktion utan även driften samt underhållet behöver beaktas eftersom de har en stor inverkan på utfallet av kapaciteten, prestandan samt kostnaderna över hela anläggningens livscykel. Vidare har studien visat vikten av att ha tillförlitliga system som kan ge information om anläggningen och även all data som krävs för att utföra analyser. / ABSTRACT Date: 2018-05-31 Level: Degree Project in Industrial Engineering and Management, 30 ECTS Institution: School of Business, Society and Engineering, Mälardalen University Authors: Elias Kirilmaz & Jennifer Quach Title: Design a railway infrastructure from a lifecycle perspective: A case study on how infrastructure administrator can improve large technical systems by focusing on life cycle perspective during the planning phase. Keywords: Project, Life Cycle Cost, Railway, Reliability, Availability, Maintainability, Integrated logistic support, ILS, Asset Management, Long-termLarge technical systems, LTS Tutor: Pär Blomkvist & Christian Johansson Norbäck Purpose: The purpose of the study is to investigate which factors affect the longlife cycle-term planning of a railway infrastructure. The aim is to clarify what the Swedish Transport Administration needs to take into account when planning a railway infrastructure in the future in order to meet the requirements and increase the predictability of life cycle costs. Research questions: How can railway infrastructure planning phase be improved based on a life cycle long-term perspective? What factors do the Swedish Transport Administration need to take into account during the planning phase to ensure reliable and cost-effective railway infrastructure? How can a working methodology be designed to promote a cost-effective railway facility? Method: The following study is based on a qualitative case study of Swedish Transport Administration. The literature study and the theoretical framework are based on peer-previewed journals, scientific articles and books that covers the areas of the study. The empirical data collection is based on semi-structured interviews and reports from different administrative authority. Conclusion: This study has shown that planning of railway infrastructure from a life cycle perspective can be improved by concrete evidence to support the decisions to be taken. The decisions basis for the railway infrastructure should be based on various analysis in order to evaluate the most cost-effective option while reflecting the desired goals and requirements. However, analysis should not only be based on the technical design. It should also consider operation and maintenance, since they have a major impact on the outcome of capacity, performance and cost throughout the life cycle of the railway infrastructure. Furthermore, the study has demonstrated the importance of having reliable systems that can provide information about the railway infrastructure and all data required for carrying out analysis.