No description available.

This thesis deals with the topic of  model-based design and application of simulation in system design. In the introduction, the thesis discusses the history of software development process and outlines the current status. The aim is to demonstrate a model-driven design on a case study of conference system. There will be presented formalisms of DEVS and OOPN  together with experimental tools PNtalk and SmallDEVS that allow to work with these formalisms. The resulting model of conference system will be deployed as part of a web application using a framework Seaside in the Squeak environment.

Jörn Sieglerschmidt, Bibliotheksservice-Zentrum Baden Württemberg, Konstanz, führte seine Zuhörer durch die schwierigen Aufgaben bei der Vertextung von Museumsgut, wobei er deutlich machte, dass anders als im Bibliothekswesen die Grenzen zwischen Formal- und Sacherschließung fließend sind: http://titan.bsz-bw.de/cms/museen/musis/publ/sieglerschmidt_freiburg2007.pdf

Model-driven software development (MDSD) and component-based software development are both paradigms for reducing complexity and for increasing abstraction and reuse in software development. In this thesis, we aim at combining the advantages of each by introducing methods from component-based development into MDSD. In MDSD, all artefacts that describe a software system are regarded as models of the system and are treated as the central development artefacts. To obtain a system implementation from such models, they are transformed and integrated until implementation code can be generated from them. Models in MDSD can have very different forms: they can be documents, diagrams, or textual specifications defined in different modelling languages. Integrating these models of different formats and abstraction in a consistent way is a central challenge in MDSD. We propose to tackle this challenge by explicitly separating the tasks of defining model components and composing model components, which is also known as distinguishing programming-in-the-small and programming-in-the-large. That is, we promote a separation of models into models for modelling-in-the-small (models that are components) and models for modelling-in-the-large (models that describe compositions of model components). To perform such component-based modelling, we introduce two architectural styles for developing systems with component-based MDSD (CB-MDSD). For CB-MDSD, we require a universal composition technique that can handle models defined in arbitrary modelling languages. A technique that can handle arbitrary textual languages is universal invasive software composition for code fragment composition. We extend this technique to universal invasive software composition for graph fragments (U-ISC/Graph) which can handle arbitrary models, including graphical and textual ones, as components. Such components are called graph fragments, because we treat each model as a typed graph and support reuse of partial models. To put the composition technique into practice, we developed the tool Reuseware that implements U-ISC/Graph. The tool is based on the Eclipse Modelling Framework and can therefore be integrated into existing MDSD development environments based on the framework. To evaluate the applicability of CB-MDSD, we realised for each of our two architectural styles a model-driven architecture with Reuseware. The first style, which we name ModelSoC, is based on the component-based development paradigm of multi-dimensional separation of concerns. The architecture we realised with that style shows how a system that involves multiple modelling languages can be developed with CB-MDSD. The second style, which we name ModelHiC, is based on hierarchical composition. With this style, we developed abstraction and reuse support for a large modelling language for telecommunication networks that implements the Common Information Model industry standard.

Interest for business models and business modeling has increased rapidly since the mid-1990‘s and there are numerous approaches used to create business models. The business model concept has many definitions which can lead to confusion and slower progress in the research and development of business models. A business model ontology (BMO) was created in 2004 where the business model concept was conceptualized based on an analysis of existing literature. A few years later the Business Model Canvas (BMC) was published; a popular business modeling approach providing a high-level, semi-formal approach to create and communicate business models. While this approach is easy to use, the informality and high-level approach can cause ambiguity and it has limited computer-aided support available. In order to propose a solution to address this problem and facilitate the development and communication of Business Model Canvas models, two artifacts are created, demonstrated and evaluated; a structured metamodel for the Business Model Canvas and its implementation in an OMG standards-based modeling tool to provide tool support for BMC modeling.This research is carried out following the design science approach where the artifacts are created to better understand and improve the identified problem. The problem and its background are explicated and the planned artifacts and requirements are outlined. The design and development of the artifacts are detailed and the resulting BMC metamodel is presented as a class diagram in Unified Modeling Language (UML) and implemented to provide tool support for BMC modeling. A demonstration with a business model and an evaluation is performed with expert interviews and informed arguments.The creation of a BMC metamodel exposed some ambiguity in the definition and use of the Business Model Canvas and the importance of graphical presentation and flexibility in the tools used.The evaluation of the resulting artifacts suggests that the artifacts do facilitate the development and communication of the Business Model Canvas models by improving the encapsulation and communication of information in a standardized way and thereby the goals of the research are met.

Magister Scientiae (Medical Bioscience) - MSc(MBS) / Purpose: Breast cancer is one of the most frequent and fatal diseases women all around the globe are challenged with today. In women, breast cancer has the highest mortality rate of all cancers and the incidence rate is on the increase. It is estimated that by the year 2025, 19.3 million women will become a victim of this grave health problem. This disease is a result of the formation of malignant tumours caused by genetic alterations that are involved in the proliferation of cells, cellular differentiation and the disturbance in homeostasis which subsequently leads to the abnormal multiplication and growth of cells. Breast cancer is considered a multifactorial disease with various risk factors such as age, radiation exposure, hormone therapy, oral contraceptives, dietary factors, environmental exposure and genetic predispositions. Breast cancers can be subdivided and classified based on their cellular surface receptors such as Estrogen Receptors, Progesterone Receptors and Human Epidermal Growth Factor Receptor 2. Of the various subtypes, the triple-negative breast cancer subtype which is negative for all 3 surface receptors and presents as the most aggressive form of breast cancer with a poor prognosis. Between 10-20% of all breast cancer cases are classified as triple-negative breast cancer. Due to the hormonal status of triple-negative breast cancer, treatment options are limited and thus of great concern. Chemotherapy remains the most common treatment modality, but prognosis is poor with relapse within years ultimately leading to poor survival outcome. Due to this lack of effective treatment plans, an alternative treatment with minimal side effects and better survival remains an imperative area to explore. A wide scope of literature highlights red palm oil and its health benefits, with its growth inhibitory potential drawing great attention. Red palm oil, extracted from the Elaeis guineensis palm tree is red in colour due to the abundance of carotenoids, tocotrienols and tocopherols found in the oil. Various compounds make up the oil such as lycopene, carotenes, vitamin E and coenzyme Q10. Most studies have researched the effects of vitamin E extracted from the oil as a contributor to its growth inhibitory activity. This study focuses on the effects of the commercial red palm oil as a whole with all its compounds on the proliferation of breast cancer cells as well as the effect it has on various genes associated with breast cancer. Method: This study investigated the effect of red palm oil concentrations (1, 10, 100, 500 and 1000 μg/ml) on breast cancer cells—MCF-7 and MDA-MB-231 with comparison to a non-cancerous cell line—MCF-12A for 24-, 48- and 72-hour treatment periods. The parameter investigated was cell proliferation through the CCK-8 cell proliferation assay and the morphology following red palm oil treatment was observed and captured. Additionally, this study also investigated the effect of red palm oil on the expression of Human Mammaglobin (hMAM) and Maspin genes through the PCR assay and results visualised through agarose gel electrophoresis. Data was statistically analysed using GraphPad version 6.0 software. Results: Following treatment of red palm oil, no apparent changes in the cell morphology was observed despite using variable treatment concentrations over variable times for MCF-7, MDA-MB-231 and MCF-12A cells relative to their respective controls. Immortalised MCF-12A cells showed a significant increase in proliferation with the varying treatment concentrations, but more prominently with the highest concentration at 24, 48 and 72 hours. MCF-7 cells showed significant decreases at 24 and 72 hours. Decreased proliferation was observed at all dosages used, particularly at 10, 100, and 500 μg/ml. Furthermore, MDA-MB-231 cells demonstrated a gradual increase in cell proliferation for the 3 selected time periods in the varying concentrations. Additionally, red palm oil did not alter the gene expression of Maspin at any of the varying treatments for MDA-MB-231 nor MCF-7 cells. However, changes in hMAM gene expression were observed at treatment concentration of 100 μg/ml in MDA-MB-231 cells that were incubated for 24 and 48 hours. However, the hMAM expression was not affected in treated MCF-7 cells. Conclusion: Red palm oil, as an alternative dietary oil, seems to have potential growth inhibitory properties as demonstrated by the change in the cell proliferation of the MCF-7 cells. Literature show that various individual compounds extracted from red palm oil have anti-proliferative and inhibitory effects on breast cancer cells making them good candidates for therapy. However, this study concludes that red palm oil as a whole component would not be a suitable therapeutic agent for highly aggressive triple-negative breast cancer.

MSc. thesis deals with mobile digital assistant T-Mobile MDA II running Linux operating system. The first part presents device identification and parameters' specification of the MDA II. The second part focuses on selection of GNU distribution with Linux bootloader and Linux kernel support comparison. The subject of the last part is MDA II component code implementation and its merging into Linux kernel.

Surface contamination occurs in nuclear facilities, something that is important to detect easily and efficiently. Using today’s methods to detect nuclear surface contamination may cause certain inconsistencies as the human operator is solely trusted to keep the detector at the correct distance and move it at the correct speed. This thesis project aims to address the problem of inconsistent measurements with respect to the current measurement methods. A system is designed to monitor the measurement process with regards to detector velocity and height. The system will trigger a warning when the minimum detectable activity is too high, as it would lead to inconsistent results. This system consists of a cart-detector setup with a scintillation detector and velocity measurement device(s). Software will utilize the measurement data to implement the aforementioned monitoring. The system aims to be compliant with international standards, such as the ISO 11929 and the ISO 7503 standards, and will thus make use of these standards. The result of the part-analysis for each component of the system showed a large inaccuracy regarding the Intertial Measurement Units (IMUs); hence, the robotic wheels were chosen as the main method of measuring speed for this project. The robotic wheels and the detector were shown to be sufficiently accurate for the desired measurements. The Raspberry Pi 4 model B, the on- board computer, was also shown to be performance-wise and property-wise well suited for the project. This project showed that there is a theoretical way to implement the speed of a moving detector-rig into the Minimum Detectable Activity (MDA) formula. However, the implementation investigated in this project suggests that full compatibility with ISO 7503 was not achievable. / Radioaktiv ytkontaminering förekommer i kärnkraftverk, vilket är viktigt att upptäcka snabbt och effektivt. Dagens metoder för att upptäcka radioaktiv ytkontaminering kan lida av viss osäkerhet eftersom man förlitar sig helt på att operatören kan manövrera detektorn på rätt höjd och hastighet. Detta examensarbete behandlar en lösning till det ovan nämnda problemet. Ett ”proof-of-concept”-system som kan övervaka mätprocessen designas. Genom att mäta hastighet och känna till höjden över marken kan en varning meddelas användaren när den minsta detekterbara aktiviteten (MDA) når ett tröskelvärde. Det färdiga systemet är en plattform på hjul med en scintillator- detektor monterad tillsammans med en eller flesta hastighetsmätningsenheter. Systemet bör vara kompatibelt med internationella standarder, till exempel ISO 11929 och ISO 7503. Resultaten från den utvärdering av varje individuell komponent som gjorts visade på en stor mätosäkerhet i de två utvärderade IMUerna. Detta medförde att robothjulen valdes som enda källa för hastighetsmätning. Robothjulen, samt detektorn påvisade god mätsäkerhet, väl lämpad för detta projekt. Även mikrodatorn, Raspberry Pi 4 model B, visade sig vara lämplig sett till prestanda och egenskaper. Projektet resulterade i att det är trott att det finns en lämpligt sätt att i teorin implementera hastighet som en parameter i formeln för MDA. Det är dock värt att nämna att resultaten tyder på att det i denna implementation inte var möjligt att uppnå fullständig kompabilitet ISO 7503.

No description available.

No description available.