Aquesta tesi presenta un nou mètode pel disseny invers de reflectors. Ens hem centrat en tres temes principals: l’ús de fonts de llum reals i complexes, la definició d’un algoritme ràpid pel càlcul de la il•luminació del reflector, i la definició d’un algoritme d’optimització per trobar més eficientment el reflector desitjat. Les fonts de llum estan representades per models near-field, que es comprimeixen amb un error molt petit, fins i tot per fonts de llum amb milions de raigs i objectes a il•luminar molt propers. Llavors proposem un mètode ràpid per obtenir la distribució de la il•luminació d’un reflector i la seva comparació amb la il•luminació desitjada, i que treballa completament en la GPU. Finalment, proposem un nou mètode d’optimització global que permet trobar la solució en menys passos que molts altres mètodes d’optimització clàssics, i alhora evitant mínims locals. / This thesis presents new methods for the inverse reflector design problem. We have focused on three main topics: the use of real and complex light sources, the definition of a fast lighting simulation algorithm to compute the reflector lighting, and the definition of an optimization algorithm to more efficiently find the desired reflector. The light sources are represented by near-field datasets, that are compressed with a low error, even with millions of rays and for very close objects. Then, we propose a fast method to obtain the outgoing light distribution of a reflector and the comparison with the desired one, working completely in the GPU. Finally, a new global optimization method is proposed to search the solution in less steps than most other classic optimization methods, also avoiding local minima.

In this study nano-patterning was carried out using two different nano-optic devices namely- the NSOM and Fresnel zone plate. In the first study, NSOM was used to generate nano-patterns on selected semiconducting (Si and Ge) and metallic (Cr, Cu and Ag) targets under different laser pulse durations, laser energies and number of laser pulses. Based on the experimental results, femtosecond laser pulses, provided lower pattern generation thresholds on targets but higher damage thresholds to the NSOM probes at the wavelength (~400-410 nm) studied, compared with nanosecond laser pulses. Three different mechanisms were identified as the dominant processes for pattern generation under different conditions, namely nano-scale laser ablation, nano-scale thermal oxidation and nano-scale melting/recrystallization of the targets. Furthermore, the resulting nano-patterns also showed a significant dependence on the optical properties (i.e., absorption coefficient and surface reflectivity) of the target material. By comparing the obtained experimental results, it was concluded that the optical energy transport from the NSOM probe to the target dominates the pattern generation when femtosecond laser is applied to the NSOM system. When nanosecond laser is applied, both the thermal and optical energy transported from the NSOM probe to the targets attribute to the obtained morphology of nano-patterns on different targets under the experimental conditions studied. In the second study, a traditional Fresnel zone plate with a focus length of 3 micrometres was fabricated with a novel lift-off process in e-beam lithography. The fabrication process involved, using a HSQ/PMMA bi-layer in a negative tone lift-off process with a layer of conducting polyaniline for charge dissipation. HSQ was used as the high resolution negative resist for e-beam patterning and the PMMA under-layer was used to enable a HSQ lift-off process. The fabricated Fresnel zone plate was used to generate nano-patterns on a UV sensitive photoresist using nanosecond laser light with lamda~409nm. The smallest pattern sizes generated was close to the diffraction limit. Nano-pattern sizes generated on the photoresist were comparable with a numerically calculated intensity distribution at the focus spot of the designed Fresnel zone plate obtained from Scalar Diffraction Theory.

Prior to this study, to our best knowledge, no cast-in-place, older-type RC building has ever been subjected to near-field strong ground motions from three major earthquakes. This happened in an indirect way in Turkey over a time span of eleven years. Three identical buildings belonging to Ministry of Public Works and Resettlement (MPWR) that had been built to the same design templates, experienced March 13th 1992 Erzincan earthquake in Erzincan, November 12th 1999 D&uuml / zce earthquake in Bolu and May 1st 2003 Bing&ouml / l earthquake in Bing&ouml / l, respectively. The ground motion sensor stations were fortuitously nearby in an adjacent single-story building in Bolu and Bing&ouml / l. The station in Erzincan was in a single-story building about 2 km away from the case study building but we assume that the record applies to the building there. These three data represent characteristics of near-field ground motions and the distance of the sensor stations to the nearest fault trace was less than 10 km. The buildings sustained varying degrees of damage during the earthquakes and their damage survey was employed through site investigations. Given that the damage information, input motions, design drawings and material properties of the buildings are all known, this provided an opportunity to predict the structural damage to these buildings by proper modeling using the tools of current computational performance assessment procedures. In this circumstance, three dimensional (3D) analytical models of the MPWR buildings have been performed. Bi-directional excitations have been applied to the models by nonlinear time history analyses (NTHA). The results illustrate that NTHA are capable of indicating the occurrence of shear failure in captive columns / however, they overestimate the global damage level for all buildings. The overestimation is more significant in Erzincan case where the building sustained a pulse-type motion without significant distress.

Antenna is an indispensable part of a radar or free space communication system. Antenna requires different stringent specifications for different applications. Designed and fabricated for an intended application, antenna or antenna array has to be evaluated for its far-field characteristics in real free space environment which requires setting up of far-field test site. Maintenance of the site to keep the stray reflections levels low, the cost of the real estate are some of the disadvantages. Nearfield measurements are compact and can be used to test the antennas by exploiting the relationship between near-field and far-field. It is shown that the far-field patterns of an antenna can be sufficiently accurately predicted provided the near-field measurements are accurate. Due to limitation in the near-field measurement systems, errors creep in corrupting the nearfield-measured data thus making error in prediction of the far field. All these errors ultimately corrupt the phase and amplitude data. In this thesis, one such near-field measurement facility, the Planar Near Field Measurement facility is discussed. The limitations of the facility and the errors that occur due to their limitations are discussed. Various errors that occur in measurements ultimately corrupt the near-field phase and amplitude. Investigations carried out aim at a detailed study of these phase and amplitude errors and their effect on the far-field patterns of the antenna. Depending on the source of error, the errors are classified as spike, pulse and random errors. The location of occurrence of these types of errors in the measurement plane, their effects on the far-field of the antenna is studied both for phase and amplitude errors. The studies conducted for various phase and amplitude errors show that the near-field phase and amplitude data are more tolerant to random errors as the far-field patterns do not get affected even for low sidelobe cases. The spike errors, though occur as a wedge at a single point in the measurement plane, have more pronounced effect on the far-field patterns. Lower the taper value of the antenna, more pronounced is the error. It is also noticed that the far-field pattern gets affected only in the plane where the error has occurred and has no effect in the orthogonal plane. Pulse type of errors which occur even for a short length in the measurement affect both the principle plane far-field patterns. This study can be used extensively as a tool to determine to the level to which various error such as mechanical, RF etc need to be controlled to make useful and correct pattern predictions on a particular facility. Thereby, the study can be used as a tool to economise the budget of the facility wherein the parameters required for building the facility need not be over specified beyond the requirement. In general, though this is a limited study, it is certainly a trendsetter in this direction.

This thesis examines and exploits the optical properties of pairs of MNPs. Pairs of MNPs offer two further parameters not existent at single MNPs, which both affect the local optical fields in their vicinity: the distance between them, and their relative orientation with respect to the polarisation of the excitation light. These properties are subject of three chapters: One section examines the distance-dependent and orientation-sensitive scattering cross section (SCS) of two equally sized MNPs. Both near- and far-field interactions affect the spectral position and spectral width of the SCS. Far-field coupling affects the SCS even in such a way that a two-particle system may show both a blue- and redshifted SCS, depending only on the distance between the two MNPs. The maximum distance for this effect is the coherence length of the illumination source – a fact of importance for SCS-based experiments using laser sources. Another part of this thesis examines the near-field between two MNPs and the dependence of the locally enhanced field on the relative particle orientation with respect to the polarisation of the excitation light. To attain a figure of merit, the intensity of fluorescence light from dye molecules in the surrounding medium was measured at various directions of polarisation. The field enhancement was turned into fluorescence enhancement, even providing a means for sensing the presence of very small MNPs of 12 nm in diameter. In order to quantify the near-field experimentally, a different technique is devised in a third section of this thesis – scanning particle-enhanced Raman microscopy (SPRM). This device comprises a scanning probe carrying an MNP which in turn is coated with a molecule of known Raman signature. By manoeuvring this outfit MNP into the vicinity of an illuminated second MNP and by measuring the Raman signal intensity, a spatial mapping of the field enhancement was possible. / Diese Dissertation untersucht und nutzt die optischen Eigenschaften von Paaren von Metall-Nanopartikeln (MNP). MNP-Paare bieten gegenüber einzelnen MNP zwei weitere Parameter, welche beide auf das optische Nahfeld der zwei MNPs wirken: zum Einen der Abstand der zwei MNPs zueinander, zum Anderen die relative Ausrichtung des Paares bezüglich der Polarisation des anregenden Lichts. Diese Eigenschaften sind Thema der Arbeit: Ein Abschnitt untersucht den abstands- und orientierungsabhängigen Streuquerschnitt (SQS) zweier gleichgroßer MNPs. Die spektrale Position und die Breite des SQS wird von Wechselwirkungen sowohl im Nah- als auch im Fernfeld beeinflusst. Der Einfluß der Fernfeld-Wechselwirkung geht so weit, daß ein Zwei-MNP-System sowohl einen blau- als auch einen rotverschobenen SQS haben kann – dies hängt lediglich vom Abstand der zwei MNPs ab. Die Reichweite dieser Fernfeld-Wechselwirkung wird durch die Kohärenzlänge der Beleuchtungsquelle bestimmt – eine wichtige Tatsache für SQS-Untersuchungen, welche Laserquellen verwenden. Ein weiterer Teil der Dissertation untersucht das Nahfeld zwischen zwei MNPs. Insbesondere wird dargestellt, inwieweit die Überhöhung des Nahfelds von der Orientierung des Partikelpaares bezüglich der Polarisation des Anregungslichts abhängt. Um den Effekt quantifizieren zu können, wurde die Intensität der Fluoreszenz des umgebenden Mediums für verschiedene Polarisationsrichtungen gemessen. Die lokale Feldverstärkung konnte in eine Fluoreszenzverstärkung gewandelt werden, mit deren Hilfe sich sogar die Anwesenheit sehr kleiner MNPs von nur 12 nm Durchmesser nachweisen ließ. Wie Nahfeld-Intensitäten experimentell quantifiziert werden können, stellt ein dritter Abschnitt dieser Dissertation vor – per MNP-verstärkter Raman-Rastersonden-Mikroskopie. Diese Technik besteht aus einer Rastersonde, welcher ein MNP anheftet, welches wiederum mit einem Molekül bekannter Ramansignatur überzogen ist. Indem solch eine Sonde in die unmittelbare Nähe eines zweiten, beleuchteten MNPs gebracht wurde und dabei die Intensität des Raman-Signals aufgezeichnet wurde, ließ sich die räumliche Verteilung der Ramanverstärkung vermessen.

Nanometer-scale particles of the noble metals have been used for decades as contrast enhancement agents in electron microscopy. Over the past several years it has been demonstrated that these particles also function as excellent contrast agents for optical imaging techniques. The resonant optical scattering they exhibit enables scattering cross sections that may be many orders of magnitude greater than the analogous efficiency factor for fluorescent dye molecules. Biologically relevant labeling with nanoparticles generally results in aggregates containing a few to several tens of particles. The electrodynamic coupling between particles in these aggregates produces observable shifts in the resonance-scattering spectrum. This dissertation provides a theoretical analysis of the scattering from nanoparticle aggregates. The key objectives are to describe this scattering behavior qualitatively and to provide numerical codes usable for modeling its application to biomedical engineering. Considerations of the lowest-order dipole-dipole coupling lead to simple qualitative predictions of the behavior of the spectral properties of the optical cross sections as they depend on number of particles, inter-particle spacing, and aggregate aspect ratio. More comprehensive analysis using the multiple-particle T-matrix formalism allows the elaboration of more subtle cross-section spectral features depending on the interactions of the electrodynamic collective-modes of the aggregate, of individual-particle modes, and of modes associated with groups of particles within the aggregate sub-structure. In combination these analyses and the supporting numerical code-base provide a unified electrodynamic approach which facilitates interpretation of experimental cross section spectra, guides the design of new biophysical experiments using nanoparticle aggregates, and enables optimal fabrication of nanoparticle structures for biophysical applications. / text

No description available.

This dissertation presents the contributions and the research conducted in developing and implementing Microwave Tomography (MWT) systems. MWT is an imaging modality which aims to interrogate an object of interest by microwave energy, and quantitatively “find” the interior spatial distribution of its dielectric properties using field measurements taken outside the object. Due to the inherent non-linearity of the MWT problem, a substantial amount of electromagnetic scattering data is required to ensure a robust inversion and quantitatively accurate imaging results. This research benefits a variety of applications including biomedical imaging, industrial non-destructive testing, and security applications. Developing a MWT system, requires many critical components including the bandwidth and polarization purity of the collected fields as well as calibration of the fields scattered by the object of interest. Two generations of MWT systems were designed, implemented, calibrated and tested at the University of Manitoba (UM). These systems aim different approaches for near-field measurements which are referred to as the direct and indirect methods. With regard to the antenna design, a novel methodology applicable to broadband planar antennas is introduced. This technique is based on a combination of field modelling, herein, the finite element method and transmission line modelling. In the first generation of the UM MWT systems, a suitable antenna system was utilized. The system under study was a prototype, where twenty-four co-resident antennas encircle the object of interest to directly measure the fields. In the second generation of the UM MWT systems, the feasibility of using a novel technique to indirectly measure the fields by a secondary array of near-field scatterer probes was studied. The technique is based on the Modulated Scatterer Technique (MST). In this system, antennas are called ``collectors", since the role of antennas are changed to collecting probes' scattered fields. A number of PIN diodes were utilized to activate the probes. Finally, the capability of the probe system was investigated and its performance with the previously constructed tomography systems was compared. Various dielectric phantoms were utilized to test the accuracy of the systems.

This dissertation focuses on near-field radiative transfer, which can be defined as the discipline concerned with energy transfer via electromagnetic waves at sub-wavelength distances. Three specific subjects related to this discipline are investigated, namely nearfield thermal radiation, nanoscale-gap thermophotovoltaic (nano-TPV) power generation and optical characterization. An algorithm for the solution of near-field thermal radiation problems in one-dimensional layered media is developed, and several tests are performed showing the accuracy, consistency and versatility of the procedure. The possibility of tuning near-field radiative heat transfer via thin films supporting surface phononpolaritons (SPhPs) in the infrared is afterwards investigated via the computation of the local density of electromagnetic states and the radiative heat flux between two films. Results reveal that due to SPhP coupling, fine tuning of near-field radiative heat transfer is possible by solely varying the structure of the system, the structure being the film thicknesses and their distance of separation. The coexistence of two regimes of near-field thermal radiation between two thin films of silicon carbide is demonstrated via numerical simulations and an asymptotic analysis of the radiative heat transfer coefficient. The impacts of thermal effects on the performances of nano-TPV power generators are investigated via the solution of the coupled near-field thermal radiation, charge and heat transport problem. The viability of nano-TPV devices proposed so far in the literature, based on a tungsten radiator at 2000 K and indium gallium antimonide cell, is questioned due to excessive heating of the junction converting thermal radiation into electricity. Using a convective thermal management system, a heat transfer coefficient as high as 105 Wm-2K-1 is required to maintain the junction at room temperature. The possibility of characterizing non-intrusively, and potentially in real-time, nanoparticles from 5 nm to 100 nm in size via scattered surface wave is explored. The feasibility of the characterization framework is theoretically demonstrated via a sensitivity analysis of the scattering matrix elements. Measurements of the scattering matrix elements for 200 nm and 50 nm gold spherical particles show the great sensitivity of the characterization tool, although an ultimate calibration is difficult with the current version of the experimental set-up.

La RFID est une technologie majeure qui connaît depuis plus d'une dizaine d'années un essor considérable en termes d'applications. Cependant son déploiement à grande échelle reste limité par des plusieurs verrous technique et technologique par lesquels la portée de lecture des tags et leur forte sensibilité à l'environnement de l'application. Le travail engagé dans cette thèse vise le développement des nouvelles antennes lecteurs pour systèmes RFID UHF champ proche. Ce type de système exploite la bande UHF de la RFID en zone de champ proche pour la traçabilité des cibles de taille miniature sur une zone proche du lecteur avec une portée limitée. Les tags se trouvant au delà de cette portée ne doivent pas être détectés par le lecteur. L'objectif dans ce travail est d'apporter des solutions au niveau des antennes lecteurs également celles du tag pour assurer une détection des tags sur une zone confinée de l'espace. Actuellement, moyennant l'utilisation d'un tag sous forme de boucle (1*1 cm²), il est possible de lire ce dernier en contact, c'est à dire dans la zone 0 – 10 cm. Il fallait donc pouvoir assurer une lecture fiable (de type couplage EM) pour une portée s'étendant d'une dizaine de centimètres. Les antennes lecteurs champ proche développés dans ce travail sont en mesure d'assurer une zone de lecture limitée (20 à 35 cm) qui s'étend sur une dizaine de centimètres de côté. / RFID is one of the most popular technologies in this decade. However, its deployment at a high scale is limited by several technical and technological limitations as the read range of tags and their sensitivity to the application's environment. In this thesis we focus on the development of new reader antennas for Near Field UHF RFID systems. This type of system uses the UHF RFID band in near field zone for the traceability of miniature size targets on an area near the reader with a limited zone. Tags being outside this zone should not be detected by the reader .One of the objective of this thesis is to provide solutions in terms of readers and tag antennas to ensure detection tags on a confined area of space. Actually, we can read loop RFID tag (1*1 cm²) in contact (read range 0-10 cm). So we have to be able to ensure a good reading of tag (EM coupling) in a range from few centimeters to meters. Near field reader antenna developed in this thesis work, has a limited range between 20 and 30 cm with a large reading zone.