In this thesis, the microstructure of organic photovoltaic APFO-3:PC61BM bulk-heterojunction blends was examined. Earlier studies have focused on the microstructure after spin coating. This thesis aims to give a better insight into microstructural degradation as the films are annealed above the glass transition temperature, Tg, and the mixture approaches thermodynamic equilibrium. Electro- and photoluminescence studies indicate that the polymer and PC61BM are intermixed on a scale shorter than the exciton diffusion length of 10 nm, even when annealed above Tg. The temperature stability of APFO-3:PC61BM was also investigated with respect to the molecular weight of the polymer. The photovoltaic performance of these blends was found to be stable up to temperatures approaching the glass transition temperature, especially if a high molecular-weight APFO-3 grade was used.   The crystallization of PC61BM was also investigated. Above Tg, PC61BM crystallization was found to commence, albeit slowly at temperatures close to Tg. At elevated temperatures instead, micrometer sized crystals were observed to form. It was also noted that illumination while annealing APFO-3:PC61BM thin films above Tg affected PC61BM crystallization, the origin of which is so far unclear although chemical degradation could be largely excluded.

Organic materials, such as conjugated polymers, have emerged as a promising alternative for the production of inexpensive and flexible photovoltaic cells. As conjugated polymers are soluble, liquid based printing techniques enable production on large scale to a price much lower than that for inorganic based solar cells. Present day state of the art conjugated polymer photovoltaic cells are comprised by blends of a semiconducting polymer and a soluble derivative of fullerene molecules. Such bulk heterojunction solar cells now show power conversion efficiencies of up to 4-6%. The quantum efficiency of thin film organic solar cells is however still limited by several processes, of which the most prominent limitations are the comparatively low mobility and the high level of charge recombination. Hence organic cells do not yet perform as well as their more expensive inorganic counterparts. In order to overcome this present drawback of conjugated polymer photovoltaics, efforts are continuously devoted to developing materials or devices with increased absorption or with better charge carrier transporting properties. The latter can be facilitated by increasing the mobility of the pure material or by introducing beneficial morphology to prevent carrier recombination. Minimizing the active layer film thickness is an alternative route to collect more of the generated free charge carriers. However, a minimum film thickness is always required for sufficient photon absorption. A further limitation for low cost large scale production has been the dependence on expensive transparent electrodes such as indium tin oxide. The development of cheaper electrodes compatible with fast processing is therefore of high importance. The primary aim of this work has been to increase the absorption in solar cells made from thin films of organic materials. Device construction, deploying new geometries, and evaluation of different methods to provide for light trapping and photon recycling have been strived for. Different routes to construct and incorporate light trapping structures that enable higher photon absorption in a thinner film are presented. By recycling the reflected photons and enhancing the optical path length within a thinner cell, the absorption rate, as well as the collection of more charge carriers, is provided for. Attempts have been performed by utilizing a range of different structures with feature sizes ranging from nanometers up to centimeters. Surface plasmons, Lambertian scatterers, micro lenses, tandem cells as well as larger folded cell structures have been evaluated. Naturally, some of these methods have turned out to be more successful than others. From this work it can nevertheless be concluded that proper light trapping, in thin films of organic materials for photovoltaic energy conversion, is a technique capable of improving the cell performance. In addition to the study of light trapping, two new alternative electrodes for polymer photovoltaic devices are suggested and evaluated.

The development of organic photovoltaics (OPVs) has attracted a lot of attention due to their potential to create a low cost flexible solar cell platform. In general, an OPV is comprised of a number of layers of thin films that include the electrodes, active layers and barrier films. Thus, with all of the interfaces within OPV devices, the potential for failure exists in numerous locations if adhesion at the interface between layers is inherently low or if a loss of adhesion due to device aging is encountered. To date, few studies have focused on the basic properties of adhesion in organic photovoltaics and its implications on device reliability. In this dissertation, we investigated the adhesion between interfaces for a model multilayer barrier film (SiNx/PMMA) used to encapsulate OPVs. The barrier films were manufactured using plasma enhanced chemical vapor deposition (PECVD) and the interfacial fracture toughness (Gc, J/m2) between the SiNx and PMMA were quantified. The fundamentals of the adhesion at these interfaces and methods to increase the adhesion were investigated. In addition, we investigated the adhesive/cohesive behavior of inverted OPVs with different electrode materials and interface treatments. Inverted OPVs were fabricated incorporating different interface modification techniques to understand their impact on adhesion determined through the interfacial fracture toughness (Gc, J/m2). Overall, the goal of this study is to quantify the adhesion at typical interfaces used in inverted OPVs and barrier films, to understand methods that influence the adhesion, and to determine methods to improve the adhesion for the long term mechanical reliability of OPV devices.

Over the last few decades, bulk-heterojunction organic photovoltaic devices comprising an intimately mixed donor-acceptor blend have gained serious attention due to their potential for being cheap, light weight, flexible and environmentally friendly. In this thesis, APFO-3/PCBM bulk-heterojunction based organic photovoltaic devices with an inverted layer sequence were investigated systematically. Doctor blade coating is a technique that is roll-to-roll compatible and cost efficient and has been used to fabricate the solar cells. Initial studies focused on optimization of the electrodes. A thin film of the conductive polymer PEDOT:PSS was chosen to be the transparent anode. Different PEDOT:PSS films with respect to the film thickness and deposition temperature were characterized in terms of conductivity and transmission. Decent conductance and transmittance were obtained in the films deposited with wet film thickness setting of 35 μm, The cathode was fabricated from a metal bilayer comprising Al and Ti with an area about 1 cm2, and the best-working cathodes contained a 70 nm thick Al layer covered by a thin Ti layer of about 10 -15 nm. Optimized coating temperature and wet film thickness settings for the active layer and PEDOT:PSS layer were experimentally determined. The highest efficiency of the APFO-3/PCBM based inverted solar cells fabricated by doctor blading was 0.69%, which exceeded the efficiency of spin-coated inverted cells. A higher efficiency (0.8 %) was achieved by adding a small amount of high molecular weight polystyrene to the active layer. Morphological changes after adding of the polystyrene were observed by optical microscopy and AFM. A coating temperature dependent phase separation of the APFO-3/PCBM/polystyrene blend was found.

This research is to synthesize PANI (polyaniline) thin film for polymer organic solar cells as a hole transport layer on the top of ITO substrate by using electrochemical (cyclic voltammetry) method. The device structure is ITO (150 nm) / PANI (50 nm) / P3HT: PCBM (100 nm) / Al (200 nm). We investigated surface morphology, conductivity, and light transmission of the PANI thin film from different aniline monomer concentration and studied the factors on device efficiency, also compared with the device structured with hole transport layer PEDOT:PSS. In this study, we found PANI thin films synthesized with different aniline monomer concentration, their light transmission over 80% at the range of 450 nm ~ 650nm wavelength and the conductivity up to 0.6 S/cm. It shows that PANI thin film suitably act as hole transport layer. In addition, we found morphology of PANI thin film that varied with different aniline monomer concentration. The power conversion efficiency of the device mainly affected by morphology with different aniline monomer concentration. Comparing to other parameters of concentration, the 0.3M aniline monomer concentration polymerized PANI thin film owned the most appropriate surface morphology, and the power conversion efficiency up to 1.76%.

We proposed a flexible electronics with functional poly (arylene ether)s and discotic liquid crystal. Firstly, we provided a series of the PAE polymer with remarkable thermal stability and high optical transmittance. The PAEs were synthesized via nucleophilic displacement as polymerization on a 2-trifluoromethyl-activated bisfluoro monomer, which reacted with bisphenols. Thermal analysis indicated the PAEs possessed a high glass transition point of ~300¢J and the decomposition temperature Td=500¢J at a weight loss of 5%. Additionally, high transmittance of 85%, low dielectric constant of ~2.0, and well mechanical property of the PAE films were experimentally verified, as a high potential substrate for flexible electronics. Two kind of device structure has been prepared, were organic thin film solar cell and Dye sensitized solar cell. Furthermore, we provided the self-assembled triphenylene-based liquid crystal and its polymer derivative to apply for photovoltics. The 2, 3, 6, 7-tetra-6-octyloxydibenzo[a,c]phenazine-11-carboxylic group and the polymer of merging with disc-unit and polyacrylamide. Both show a highly isotropic phase transition point of ~270¢J and the decomposition temperature Td~450¢J at a weight loss of 5%. The specific absorption in visible light region was at 200 - 450 nm. A distinct self-arrangement of columnar array was investigated by optical textures. The self-arranged pathway enhanced carrier mobility due to £k-£k conjugation in hexagonal column stacking. Finally, the PAEs and DLC materials applied to thin film solar cell (ITO/PEDOT:PSS/DLC-PAM/P3HT:PCBM/Al) as hole transporting layer. The photo-conversion efficiency was strong depending on organic compounds, such as molecular structure, photo-physic and chemical properties. On the basis of integrated characteristics, it suggested a high potential as flexible electronics for photovoltics.

This thesis studied on the research of how conducting polymer polyaniline can be used in the buffer layer of organic solar cell. There are two methods used.¡]1¡^Using spin-coating to make film of polyaniline solution.¡]2¡^Polymerizing aniline on the substrate directly by electrochemical polymerization. The electrochemical method is separated into cyclic voltammetry and potentiostatic method respectively. The latter method which improved the disadvantage of infractable thick film and low electric conductivity of polyaniline for spin-coating is chosen as the preparation method for polyaniline films. We discuss of the photoelectric characteristics and surface morphologies of polyaniline film and to make a solar cell base on Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester measured with AM 1.5G 100 mW/cm2 solar light simulation. This research combine above-mentioned results to use potentiostatic method to polymerize polyaniline on the PEDOT¡GPSS into a compound electrode and to replace currently popular ITO positive pole in a organic solar component. The structure is PEDOT¡GPSS/PANI/P3HT¡GPCBM/Al. By electroplating polyaniline, it can enhance the electric conductivity of the film of PEDOT¡GPSS from 1 S/cm to 154 S/cm, furthermore, to reach 1.06% of photoelectric conversion efficiency and creates a new possibility of preparing a flexible organic solar cell.

2-Dodecyl benzotriazole and 9,9-dioctylfluorene containing alternating copolymers poly((9,9-dioctylfluorene)-2,7-diyl-(2-dodecyl-benzo[1,2,3]triazole)) (P1), poly((9,9-dioc-tylfluorene)-2,7-diyl-(4,7-bis(thien-2-yl) 2-dodecyl benzo[1,2,3]triazole)) (P2), poly((9,9 dioctylfluorene)-2,7-diyl-(4,7-bis(3-hexylthien-5-yl) 2-dodecyl-benzo[1,2,3]triazole)) (P3) were synthesized via Suzuki polycondensation. Synthesized monomers and copolymers were characterized by Nuclear Magnetic Resonance (1H-NMR, 13C-NMR). Optical and electronic properties of resulting alternating copolymers were investigated by means of Cyclic Voltammetry (CV), Ultraviolet&ndash / Visible Spectroscopy and spectroelectrochemistry. All three polymers showed both p and n doping behaviors and multicolored electrochromic states. In order to learn switchingtimes and percent transmittance changes kinetic studies were also performed. Thermal properties of the polymers were investigated via Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Due to the convenient HOMO and LUMO levels, band gaps, strong absorptions in the visible region and thermal stability, polymers were tested in Organic Solar Cell (OSC) device applications. The preliminary investigation indicated that polymers had promising power conversion efficiencies.

Three new azobenzene containing conjugated monomers were designed and synthesized. Resulting monomers were characterized by means of 1H NMR and 13C NMR techniques. Monomers (E)-1,2-bis(4-(thiophen-2-yl)phenyl)diazene (M1), (E)-1,2-bis(4-(4-hexylthiophen-2-yl) phenyl) diazene (M2) and (E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl) diazene (M3) were electrochemically polymerized using cyclic voltammetry to give polymers P1, P2 and P3. The polymers were subjected to spectroelectrochemical and kinetic studies in order to obtain information about their elecrochromic characteristics. P1 and P2 were pale-yellow in their neutral states and blue in oxidized states while P3 showed multichromic property due to having polaron bands in visible region of the spectrum. Addition of fluorine atoms to the backbone of P3, lowered the LUMO level of P3 thus gained the polymer n-doping property. In the second part of this thesis poly((9,9-dioctylfluorene)-2,7-diyl-(4,7-bis(thien-2-yl) 2-dodecyl-benzo[1,2,3]triazole)) (PFTBT) polymer was mixed with common electron acceptor Phenyl-C61-butyric acid methyl ester (PCBM) and used in organic solar cell applications. Active layers containing PFTBT and PCBM were spin casted on ITO coated substrates at varying rotational speeds to obtain active layer thicknesses having different values. Thickness of the active layer was optimized so was the efficiency of organic solar cells. As a result of this optimization study, efficiency of PFTBT containing organic solar cells were increased to 1.06% which is a higher value than previosly reported literature results.

Organic solar cells promise electricity generation at very low cost, and higher installation flexibility as compared to inorganic solar cells. The lower cost is achieved by cheaper semiconductors and easier manufacturing processes. The flexibility is naturally given by these ultra-thin, amorphous layers. Also the power conversion efficiency can be high enough for many applications. The organic molecules have to withstand the constant excitation by photons, transport of energy in form of excitons and charge. A small but significant amount of these photons has energy over the absorption gap, the excess of energy must be released without breaking the molecular bonds. In consequence, the solar cells can also heat up to temperatures at above 80°C. The objective of this work is to answer the question if the small molecules organic solar cells can be stable enough to operate under a very long time. The stability of organic doped layers in an organic solar cell is also addressed. This work starts with a general introduction followed by the description of the experimental procedures. The aging experiments of the solar cell were done with a self developed equipment. The fabrication of this equipment (a set of measurement boxes) was necessary to maintain the conditions, under which a solar cell can be aged, as constant as possible. The measurement boxes were used to control the electrical load of the cell, its temperature, the illumination intensity, and its electric connection to the IxV measurement equipment. A software package was also developed to control the equipment and to facilitate the work and visualization of the high volume of collected data. The model solar cells chosen for the aging experiments were donor-acceptor heterojunctions devices formed with the well-known materials C60 and ZnPc. Two basic different structures were analyzed, because they offered reasonable performance and potentially long lifetime: the flat heterojunction (FHJ) and the mixed heterojunction in a Metal-Insulator-p-Semiconductor (m-i-p) configuration. Variations of the FHJ and of the m-i-p structures are also used to verify the limits of the stability of electrically p- and n- doped organic semiconducting layers. The least stable solar cells are the FHJ devices. These devices show a fast initial decrease of all their characteristic conversion parameters but the Voc. After a few hundred hours, the saturation current (current under a reverse bias of 1 V) was almost stable. The saturation current is related to the number of absorbing centers, the decrease indicates that the degradation of the absorbing centers has stopped. With wavelength resolved external quantum efficiency measurements and chemical analysis, it was found that the degradation is related to the oxidation of C60. It was also shown that the use of organic dopants do not significantly affect the lifetime. The results show that the m-i-p solar cells are more stable than the FHJ devices. They are also stable under high temperatures up to 105°C. Outdoor testing also showed that the solar cells remained chemically, electrically and mechanically stable during a 900 h test.