Accuracy in turbulence modeling remains a hurdle in the widespread use of Computational Fluid Dynamics (CFD) as a tool for furthering fluids dynamics research. Meanwhile, computational power remains a significant concern for solving real-life wall-bounded flows, which portray a wide range of length and time scales. The tools for turbulence analysis at our disposal, in the decreasing order of their accuracy, include Direct Numerical Simulation (DNS), Large Eddy Simulation (LES), and Reynolds-Averaged Navier Stokes (RANS) based models. While DNS and LES would remain exorbitantly expensive options for simulating high Reynolds number flows for the foreseeable future, RANS is and continues to be a viable option utilized in commercial and academic endeavors. In the first part of the present work, flow over the back-step test case was solved, and parametric studies for various parameters such as re-circulation length (X_r), coefficient of pressure (C_p), and coefficient of skin friction (C_f) are presented and validated with experimental results. The back-step setup was chosen as the test case as turbulent modeling of flow past backward-facing step has been pivotal to understand separated flows better. Turbulence modeling is done on the test case using RANS (k-ε and k-ω models), and LES modeling, for different values of Reynolds number (Re ∈ {2, 2.5, 3, 3.5} × 10⁴) and expansion ratios (ER ∈ {1.5, 2, 2.5, 3}). The LES results show good agreement with experimental results, and the discrepancy between the RANS results and experimental data was highlighted. The results obtained in the first part reveal a pattern of under-prediction noticed with using RANS-based models to analyze canonical setups such as the backward-facing step. The LES results show close proximity to experimental data, as mentioned above, which makes it an excellent source of training data for the machine learning analysis outlined in the second part. The highlighted discrepancy and the inability of the RANS model to accurately predict significant flow properties create the need for a better model. The purpose of the second part of the present study is to make systematic efforts to minimize the error between flow properties from RANS modeling and experimental data, as seen in the first part. A machine learning model was constructed in the second part of the present study to predict the eddy viscosity parameter (μt) as a function of turbulent kinetic energy (TKE) and dissipation rate (ε) derived from LES data, effectively working as an ad hoc eddy-viscosity based turbulence model. The machine learning model does not work well with the flow domain as a whole, but a zonal analysis reveals a better prediction of eddy viscosity than the whole domain. Among the zones, the area in the vicinity of the re-circulation zone gives the best result. The obtained results point towards the need for a zonal analysis for the better performance of the machine learning model, which will enable us to improve RANS predictions by developing a reduced order turbulence model.

The goal of this work is to expand the knowledge on the field of Venn Prediction employed with Survival Data. Standard Venn Predictors have been used with Random Forests and binary classification tasks. However, they have not been utilised to predict events with Survival Data nor in combination with Random Survival Forests. With the help of a Data Transformation, the survival task is transformed into several binary classification tasks. One key aspect of Venn Prediction are the categories. The standard number of categories is two, one for each class to predict. In this work, the usage of ten categories is explored and the performance differences between two and ten categories are investigated. Seven data sets are evaluated, and their results presented with two and ten categories. For the Brier Score and Reliability Score metrics, two categories offered the best results, while Quality performed better employing ten categories. Occasionally, the models are too optimistic. Venn Predictors rectify this performance and produce well-calibrated probabilities. / Målet med detta arbete är att utöka kunskapen om området för Venn Prediction som används med överlevnadsdata. Standard Venn Predictors har använts med slumpmässiga skogar och binära klassificeringsuppgifter. De har emellertid inte använts för att förutsäga händelser med överlevnadsdata eller i kombination med Random Survival Forests. Med hjälp av en datatransformation omvandlas överlevnadsprediktion till flera binära klassificeringsproblem. En viktig aspekt av Venn Prediction är kategorierna. Standardantalet kategorier är två, en för varje klass. I detta arbete undersöks användningen av tio kategorier och resultatskillnaderna mellan två och tio kategorier undersöks. Sju datamängder används i en utvärdering där resultaten presenteras för två och tio kategorier. För prestandamåtten Brier Score och Reliability Score gav två kategorier de bästa resultaten, medan för Quality presterade tio kategorier bättre. Ibland är modellerna för optimistiska. Venn Predictors korrigerar denna prestanda och producerar välkalibrerade sannolikheter.

No description available.

Several studies have been conducted within machine learning, and various variations have been applied to a wide spectrum of other fields. However, a thorough feasibility study within the payment processing industry using machine learning classifier algorithms is yet to be explored. Here, we construct a rule-based response vector and use that in combination with a magnitude of varying feature vectors across different machine learning classifier algorithms to try and determine whether individual transactions can be considered profitable from a business point of view. These algorithms include Naive-Bayes, AdaBoosting, Stochastic Gradient Descent, K-Nearest Neighbors, Decision Trees and Random Forests, all helped us build a model with a high performance that acts as a robust confirmation of both the benefits and a theoretical guide on the implementation of machine learning algorithms in the payment processing industry. The results as such are a firm confirmation on the benefits of data intensive models, even in complex industries similar to Swedbank Pay’s. These Implications help further boost innovation and revenue as they offer a better understanding of the current pricing mechanisms. / Många studier har utförts inom ämnet maskininlärning, och olika variationer har applicerats på ett brett spektrum av andra ämnen. Däremot, så har en ordentlig genomförbarhetsstudie inom betalningsleveransindustrin med hjälp av klassificeringsalgortimer har ännu ej utforskats. Här har vi konstruerat en regelbaserad responsvektor och använt den, tillsammans med en rad olika och varierande egenskapvektorer på olika maskininlärningsklassificeringsalgoritmer för att försöka avgöra ifall individuella transaktioner är lönsamma utifrån företagets perspektiv. Dessa algoritmer är Naive-Bayes, AdaBoosting, Stokastisk gradient medåkning, K- Närmaste grannar, beslutsträd och slumpmässiga beslutsskogar. Alla dessa har hjälpt oss bygga en teoretisk vägledning om implementering av maskininlärningsalgoritmer inom betalningsleveransindustrin. Dessa resultat är en robust bekräftelse på fördelarna av dataintensiva modeller även inom sådana komplexa industrier Swedbank Pay är verksamma inom. Implikationerna hjälper vidare att förstärka innovationen och öka intäkterna eftersom de erbjuder en bättre förståelse för deras nuvarande prissättningsmekanism.

RESUMEN Los peces nativos son indicadores de la salud de los ecosistemas acuáticos, y se han convertido en un elemento de calidad clave para evaluar el estado ecológico de los ríos. La comprensión de los factores que afectan a las especies nativas de peces es importante para la gestión y conservación de los ecosistemas acuáticos. El objetivo general de esta tesis es analizar las relaciones entre variables biológicas y de hábitat (incluyendo la conectividad) a través de una variedad de escalas espaciales en los ríos Mediterráneos, con el desarrollo de herramientas de modelación para apoyar la toma de decisiones en la restauración de ríos. Esta tesis se compone de cuatro artículos. El primero tiene como objetivos modelar la relación entre un conjunto de variables ambientales y la riqueza de especies nativas (NFSR), y evaluar la eficacia de potenciales acciones de restauración para mejorar la NFSR en la cuenca del río Júcar. Para ello se aplicó un enfoque de modelación de red neuronal artificial (ANN), utilizando en la fase de entrenamiento el algoritmo Levenberg-Marquardt. Se aplicó el método de las derivadas parciales para determinar la importancia relativa de las variables ambientales. Según los resultados, el modelo de ANN combina variables que describen la calidad de ribera, la calidad del agua y el hábitat físico, y ayudó a identificar los principales factores que condicionan el patrón de distribución de la NFSR en los ríos Mediterráneos. En la segunda parte del estudio, el modelo fue utilizado para evaluar la eficacia de dos acciones de restauración en el río Júcar: la eliminación de dos azudes abandonados, con el consiguiente incremento de la proporción de corrientes. Estas simulaciones indican que la riqueza aumenta con el incremento de la longitud libre de barreras artificiales y la proporción del mesohabitat de corriente, y demostró la utilidad de las ANN como una poderosa herramienta para apoyar la toma de decisiones en el manejo y restauración ecológica de los ríos Mediterráneos. El segundo artículo tiene como objetivo determinar la importancia relativa de los dos principales factores que controlan la reducción de la riqueza de peces (NFSR), es decir, las interacciones entre las especies acuáticas, variables del hábitat (incluyendo la conectividad fluvial) y biológicas (incluidas las especies invasoras) en los ríos Júcar, Cabriel y Turia. Con este fin, tres modelos de ANN fueron analizados: el primero fue construido solamente con variables biológicas, el segundo se construyó únicamente con variables de hábitat y el tercero con la combinación de estos dos grupos de variables. Los resultados muestran que las variables de hábitat son los ¿drivers¿ más importantes para la distribución de NFSR, y demuestran la importancia ecológica de los modelos desarrollados. Los resultados de este estudio destacan la necesidad de proponer medidas de mitigación relacionadas con la mejora del hábitat (incluyendo la variabilidad de caudales en el río) como medida para conservar y restaurar los ríos Mediterráneos. El tercer artículo busca comparar la fiabilidad y relevancia ecológica de dos modelos predictivos de NFSR, basados en redes neuronales artificiales (ANN) y random forests (RF). La relevancia de las variables seleccionadas por cada modelo se evaluó a partir del conocimiento ecológico y apoyado por otras investigaciones. Los dos modelos fueron desarrollados utilizando validación cruzada k-fold y su desempeño fue evaluado a través de tres índices: el coeficiente de determinación (R2 ), el error cuadrático medio (MSE) y el coeficiente de determinación ajustado (R2 adj). Según los resultados, RF obtuvo el mejor desempeño en entrenamiento. Pero, el procedimiento de validación cruzada reveló que ambas técnicas generaron resultados similares (R2 = 68% para RF y R2 = 66% para ANN). La comparación de diferentes métodos de machine learning es muy útil para el análisis crítico de los resultados obtenidos a través de los modelos. El cuarto artículo tiene como objetivo evaluar la capacidad de las ANN para identificar los factores que afectan a la densidad y la presencia/ausencia de Luciobarbus guiraonis en la demarcación hidrográfica del Júcar. Se utilizó una red neuronal artificial multicapa de tipo feedforward (ANN) para representar relaciones no lineales entre descriptores de L. guiraonis con variables biológicas y de hábitat. El poder predictivo de los modelos se evaluó con base en el índice Kappa (k), la proporción de casos correctamente clasificados (CCI) y el área bajo la curva (AUC) característica operativa del receptor (ROC). La presencia/ausencia de L. guiraonis fue bien predicha por el modelo ANN (CCI = 87%, AUC = 0.85 y k = 0.66). La predicción de la densidad fue moderada (CCI = 62%, AUC = 0.71 y k = 0.43). Las variables más importantes que describen la presencia/ausencia fueron: radiación solar, área de drenaje y la proporción de especies exóticas de peces con un peso relativo del 27.8%, 24.53% y 13.60% respectivamente. En el modelo de densidad, las variables más importantes fueron el coeficiente de variación de los caudales medios anuales con una importancia relativa del 50.5% y la proporción de especies exóticas de peces con el 24.4%. Los modelos proporcionan información importante acerca de la relación de L. guiraonis con variables bióticas y de hábitat, este nuevo conocimiento podría utilizarse para apoyar futuros estudios y para contribuir en la toma de decisiones para la conservación y manejo de especies en los en los ríos Júcar, Cabriel y Turia. / Olaya Marín, EJ. (2013). Ecological models at fish community and species level to support effective river restoration [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/28853

The Kittlitz's murrelet (Brachyramphus brevirostris) is a rare member of the seabird family Alcidae that breeds in coastal areas of Alaska and Beringian Russia. The species belongs to the genus Brachyramphus, an unusual seabird taxon in which all three extant species nest non-colonially, situating their nests up to 75 km inland from coastal marine waters. This nesting strategy is different from that of most seabird species, which tend to nest colonially on remote islands or sea cliffs, where terrestrial predators are generally absent or cannot easily access nests. Within the genus Brachyramphus, Kittlitz's murrelet is notable because a majority of the global population appears to nest on the surface of the ground in rocky alpine habitat near inland or tidewater glaciers, foraging in adjacent marine waters influenced by glacial outflows. The unusual nesting habits of Kittlitz's murrelet have made the study of its nesting ecology difficult, and gaps therefore exist in our understanding of the species' breeding biology. Kittlitz's murrelet populations have declined substantially in core areas of its range, causing the U. S. Fish and Wildlife Service to designate the species as a candidate for protection under the Endangered Species Act. A better understanding of Kittlitz's murrelet nesting ecology is crucial for determining potential causes of these declines and for future management of the species. To this end, I studied Kittlitz's murrelet breeding ecology and nest site selection during 2008-2011 on Kodiak Island, Alaska, in an unglaciated area that was recently found to have large numbers of accessible nests. I and my colleagues found 53 active Kittlitz's murrelet nests in inland scree-dominated habitats and placed remote, motion-sensing cameras at 33 nests. Adults exchanged incubation duties at the nest every 24 or 48 h, almost exclusively during early morning twilight. Following hatching of eggs, parents provisioned their single nestling with an average of 3.9 to 4.8 fish per day, depending on the year. Parental visits to the nest during chick-rearing occurred primarily after sunrise in the early to mid-morning hours, and during evening twilight. Fish were delivered singly to the chick, and Pacific sand lance (Ammodytes hexapterus), a high-lipid forage fish, accounted for about 92% of all identifiable chick meal deliveries. Chick growth rates were high relative to confamilial species, consistent with the high quality of chick diets; the logistic growth rate constant (K) was 0.291, greater than that for any other semi-precocial alcid. Chicks fledged an average of 24.8 d after hatching and asymptotic chick body mass averaged about 135.5 g, approximately 58% of adult body mass. Age at fledging, asymptotic chick body mass (% adult mass), and the number of meal deliveries required to fledge a chick were all lower than or as low as any other species of semi-precocial alcid. The average estimated nest survival rate during 2008-2011 was 0.093 (95% CI = 0.01–0.30), which is extremely low compared to other species in the family Alcidae, and is almost certainly insufficient to sustain a stable population. The primary causes of nest failure were depredation (47% of total nest fates), mostly by red foxes (Vulpes vulpes), and unexplained nestling mortality on the nest (21% of nest fates). Saxitoxin and/or pathogenic endoparasite burdens were observed in five of six necropsied chick carcasses, suggesting possible causes for chick mortality not directly attributable to predation. Habitat characteristics of Kittlitz's murrelet nest sites differed significantly from unused sites at several scales. At a small scale (within 5 m of the nest), nest sites had a lower percent coverage of vegetation and higher percent coverage of intermediate-sized rocks (5–30 cm diameter), compared to randomly selected unused sites. Nest sites were also located on steeper, more north-facing slopes compared to randomly selected sites. Nest sites also had a lower percent coverage of vegetation than randomly-selected sites at larger scales (within 25 m and 50 m of the nest site). Nest sites were located significantly farther from the edge of densely-vegetated habitats than random sites. There was no evidence that nest sites were different from randomly-selected sites in terms of elevation, proximity to ridgelines, or proximity to the open ocean, although a low degree of variation within the study area for these habitat characteristics may have precluded detection of potential differences. Nest survival rates did not co-vary with slope, percent vegetation coverage, distance from vegetated edges, or percent cover of intermediate-sized rocks; however, this result may be an artifact of a limited sample size. The results of this thesis will provide managers with a better understanding of the factors that may limit Kittlitz's murrelet nesting success, such as nest predation and forage fish availability, as well as factors that may influence the quality and distribution of Kittlitz’s murrelet nesting habitat in the future, given on-going and progressive climate change. / Graduation date: 2013

Dans cette thèse, nous nous intéressons à l'estimation robuste de courbes moyennes ou totales de consommation électrique par sondage en population finie, pour l'ensemble de la population ainsi que pour des petites sous-populations, en présence ou non de courbes partiellement inobservées.En effet, de nombreuses études réalisées dans le groupe EDF, que ce soit dans une optique commerciale ou de gestion du réseau de distribution par Enedis, se basent sur l'analyse de courbes de consommation électrique moyennes ou totales, pour différents groupes de clients partageant des caractéristiques communes. L'ensemble des consommations électriques de chacun des 35 millions de clients résidentiels et professionnels Français ne pouvant être mesurées pour des raisons de coût et de protection de la vie privée, ces courbes de consommation moyennes sont estimées par sondage à partir de panels. Nous prolongeons les travaux de Lardin (2012) sur l'estimation de courbes moyennes par sondage en nous intéressant à des aspects spécifiques de cette problématique, à savoir l'estimation robuste aux unités influentes, l'estimation sur des petits domaines, et l'estimation en présence de courbes partiellement ou totalement inobservées.Pour proposer des estimateurs robustes de courbes moyennes, nous adaptons au cadre fonctionnel l'approche unifiée d'estimation robuste en sondages basée sur le biais conditionnel proposée par Beaumont (2013). Pour cela, nous proposons et comparons sur des jeux de données réelles trois approches : l'application des méthodes usuelles sur les courbes discrétisées, la projection sur des bases de dimension finie (Ondelettes ou Composantes Principales de l'Analyse en Composantes Principales Sphériques Fonctionnelle en particulier) et la troncature fonctionnelle des biais conditionnels basée sur la notion de profondeur d'une courbe dans un jeu de données fonctionnelles. Des estimateurs d'erreur quadratique moyenne instantanée, explicites et par bootstrap, sont également proposés.Nous traitons ensuite la problématique de l'estimation sur de petites sous-populations. Dans ce cadre, nous proposons trois méthodes : les modèles linéaires mixtes au niveau unité appliqués sur les scores de l'Analyse en Composantes Principales ou les coefficients d'ondelettes, la régression fonctionnelle et enfin l'agrégation de prédictions de courbes individuelles réalisées à l'aide d'arbres de régression ou de forêts aléatoires pour une variable cible fonctionnelle. Des versions robustes de ces différents estimateurs sont ensuite proposées en déclinant la démarche d'estimation robuste basée sur les biais conditionnels proposée précédemment.Enfin, nous proposons quatre estimateurs de courbes moyennes en présence de courbes partiellement ou totalement inobservées. Le premier est un estimateur par repondération par lissage temporel non paramétrique adapté au contexte des sondages et de la non réponse et les suivants reposent sur des méthodes d'imputation. Les portions manquantes des courbes sont alors déterminées soit en utilisant l'estimateur par lissage précédemment cité, soit par imputation par les plus proches voisins adaptée au cadre fonctionnel ou enfin par une variante de l'interpolation linéaire permettant de prendre en compte le comportement moyen de l'ensemble des unités de l'échantillon. Des approximations de variance sont proposées dans chaque cas et l'ensemble des méthodes sont comparées sur des jeux de données réelles, pour des scénarios variés de valeurs manquantes. / In this thesis, we address the problem of robust estimation of mean or total electricity consumption curves by sampling in a finite population for the entire population and for small areas. We are also interested in estimating mean curves by sampling in presence of partially missing trajectories.Indeed, many studies carried out in the French electricity company EDF, for marketing or power grid management purposes, are based on the analysis of mean or total electricity consumption curves at a fine time scale, for different groups of clients sharing some common characteristics.Because of privacy issues and financial costs, it is not possible to measure the electricity consumption curve of each customer so these mean curves are estimated using samples. In this thesis, we extend the work of Lardin (2012) on mean curve estimation by sampling by focusing on specific aspects of this problem such as robustness to influential units, small area estimation and estimation in presence of partially or totally unobserved curves.In order to build robust estimators of mean curves we adapt the unified approach to robust estimation in finite population proposed by Beaumont et al (2013) to the context of functional data. To that purpose we propose three approaches : application of the usual method for real variables on discretised curves, projection on Functional Spherical Principal Components or on a Wavelets basis and thirdly functional truncation of conditional biases based on the notion of depth.These methods are tested and compared to each other on real datasets and Mean Squared Error estimators are also proposed.Secondly we address the problem of small area estimation for functional means or totals. We introduce three methods: unit level linear mixed model applied on the scores of functional principal components analysis or on wavelets coefficients, functional regression and aggregation of individual curves predictions by functional regression trees or functional random forests. Robust versions of these estimators are then proposed by following the approach to robust estimation based on conditional biais presented before.Finally, we suggest four estimators of mean curves by sampling in presence of partially or totally unobserved trajectories. The first estimator is a reweighting estimator where the weights are determined using a temporal non parametric kernel smoothing adapted to the context of finite population and missing data and the other ones rely on imputation of missing data. Missing parts of the curves are determined either by using the smoothing estimator presented before, or by nearest neighbours imputation adapted to functional data or by a variant of linear interpolation which takes into account the mean trajectory of the entire sample. Variance approximations are proposed for each method and all the estimators are compared to each other on real datasets for various missing data scenarios.

Cette étude vise à mettre en lumière les différences et similarités existant entre les principales crises économiques et financières ayant frappé un échantillon de 21 pays avancés depuis 1981. Nous analyserons plus particulièrement la crise des subprimes que nous rapprocherons avec des épisodes antérieurs. Nous étudierons à la fois les années du déclenchement des turbulences (analyse typologique) ainsi que celles les précédant (prévision). Cette analyse sera fondée sur l’utilisation de la méthode CART (Classification And Regression Trees). Cette technique non linéaire et non paramétrique permet de prendre en compte les effets de seuil et les interactions entre variables explicatives de façon à révéler plusieurs contextes distincts explicatifs d’un même événement. Dans le cadre d‘un modèle de prévision, l’analyse des années précédant les crises nous indique que les variables à surveiller sont : la variation et la volatilité du cours de l’once d’or, le déficit du compte courant en pourcentage du PIB et la variation de l’openness ratio et enfin la variation et la volatilité du taux de change. Dans le cadre de l’analyse typologique, l’étude des différentes variétés de crise (année du déclenchement de la crise) nous permettra d’identifier deux principaux types de turbulence d’un point de vue empirique. En premier lieu, nous retiendrons les crises globales caractérisées par un fort ralentissement ou une baisse de l’activité aux Etats-Unis et une faible croissance du PIB dans les pays touchés. D’autre part, nous mettrons en évidence des crises idiosyncratiques propres à un pays donné et caractérisées par une inflation et une volatilité du taux de change élevées. / The aim of this thesis is to analyze, from an empirical point of view, both the different varieties of economic and financial crises (typological analysis) and the context’s characteristics, which could be associated with a likely occurrence of such events. Consequently, we analyze both: years seeing a crisis occurring and years preceding such events (leading contexts analysis, forecasting). This study contributes to the empirical literature by focusing exclusively on the crises in advanced economies over the last 30 years, by considering several theoretical types of crises and by taking into account a large number of both economic and financial explanatory variables. As part of this research, we also analyze stylized facts related to the 2007/2008 subprimes turmoil and our ability to foresee crises from an epistemological perspective. Our empirical results are based on the use of binary classification trees through CART (Classification And Regression Trees) methodology. This nonparametric and nonlinear statistical technique allows us to manage large data set and is suitable to identify threshold effects and complex interactions among variables. Furthermore, this methodology leads to characterize crises (or context preceding a crisis) by several distinct sets of independent variables. Thus, we identify as leading indicators of economic and financial crises: variation and volatility of both gold prices and nominal exchange rates, as well as current account balance (as % of GDP) and change in openness ratio. Regarding the typological analysis, we figure out two main different empirical varieties of crises. First, we highlight « global type » crises characterized by a slowdown in US economic activity (stressing the role and influence of the USA in global economic conditions) and low GDP growth in the countries affected by the turmoil. Second, we find that country-specific high level of both inflation and exchange rates volatility could be considered as evidence of « idiosyncratic type » crises.

This thesis aims to implement methods for recording EEG data obtained with the neural activity sensor OpenBCI Ultracortex IV headset. It also describes neurofeedback, methods of obtaining data from the motor cortex for further analysis and takes a look at the machine learning algorithms best suited for the presented problem. Multiple training and testing datasets are created, as well as a tool for recording the brain activity of a headset-wearing test subject, which is being visually presented with cognitive challenges on the screen in front of him. A neurofeedback demo app has been developed, presented and later used for calibration of new test subjects. Next part is data analysis, which aims to discriminate the left and right hand movement intention signatures in the brain motor cortex. Multiple classification methods are used and their utility reviewed.

The diploma thesis is focused on the use of artificial intelligence methods for evaluating the fault condition of machinery. The evaluated data are from a vibrodiagnostic model for simulation of static and dynamic unbalances. The machine learning methods are applied, specifically supervised learning. The thesis describes the Spyder software environment, its alternatives, and the Python programming language, in which the scripts are written. It contains an overview with a description of the libraries (Scikit-learn, SciPy, Pandas ...) and methods — K-Nearest Neighbors (KNN), Support Vector Machines (SVM), Decision Trees (DT) and Random Forests Classifiers (RF). The results of the classification are visualized in the confusion matrix for each method. The appendix includes written scripts for feature engineering, hyperparameter tuning, evaluation of learning success and classification with visualization of the result.