Cette thèse vise à développer de nouveaux matériaux hybrides pour les applications en électrochimiluminescence. Les propriétés électrochimiluminescentes de nouveaux complexes de Pt(II) et d’Ir(III) ont été explorés comme alternative aux marqueurs existants. En plus, la combinaison de complexes et de carbon nanodots portant des groupes primaires ou tertiaires à la surface comme espèces coréactives a abouti à une stratégie intéressante pour éliminer la TPrA. Les carbon nanodots dans un systéme lié par liaison covantent avec complexes métalliques sont non seulement un support innocent pour les espèces actives d’ECL, mais agissent également comme coréactif, se révélant être une plateforme auto-améliorante en ECL. Enfin, un véritable immunoessai pour la détection des marqueurs cardiaques a été mis au point avec une sensibilité et une stabilité accrues pour les applications de détection biologique et biomédicale. La même technologie peut alors être appliquée à une variété d’autres analytes, ouvrant ainsi le site à d’autres dosages. / This doctoral dissertation aim to develop new hybrid materials for ECL applications. In the field of metal complexes, the electrochemiluminescent properties of new Pt(II) and Ir(III) complexes were investigated as alternative of existing complexes. Passing to nanomaterials, the combination of labels and NCNDs bearing primary or tertiary groups on the surface as alternative co-reactant species resulted an interesting strategy to eliminate the toxic TPrA. In particular, NCNDs in covalently linked system with metal complexes is not only an innocent carrier for ECL active species, but act also as co-reactant in the ECL process, revealing itself an ECL self-enhancing platform. Finally, a real immunoassay for cardiac marker detection has been built with enhanced sensitivity and stability, which is of fundamental importance for biological and bio-medical detection applications. The same technology can be applied to a variety of other analytes opening the venue to other assays.

Les travaux présentés dans cette thèse visent à produire automatiquement des prototypes de circuits de communication et de contrôle à partir de spécifications temporelles déclaratives. Partant d'un ensemble de propriétés écrites en langage PSL, nous produisons un modèle RTL synthétisable automatiquement. La méthode proposée est modulaire, contrairement aux méthodes publiées antérieurement qui étaient fondées sur la théorie des automates. Pour chaque propriété, nous produisons un composant qui observe certains opérandes et génère des chronogrammes pour les autres opérandes : le module réactif. Tout d'abord, une bibliothèque des modules réactifs primitifs a été développée pour les opérateurs FL et SERE. Pour ce faire, une relation de dépendance a été définie pour chaque opérateur : fondée sur la sémantique de l'opérateur, elle exprime la dépendance entre ses opérandes. Ensuite, la relation de dépendance de chaque opérateur est interprétée comme un composant matériel qui met en œuvre l'opérateur : c'est le module réactif primitif de l'opérateur. À l'aide de cette formalisation, nous proposons une méthode pour déterminer automatiquement quels signaux d'une propriété sont observés et lesquels sont générés. Dans le cas où il n'est pas possible de déterminer le sens du signal, un solveur est ajouté pour identifier la valeur du signal. Le solveur sert aussi à déterminer la valeur d'un signal généré par plusieurs propriétés. Le circuit final est l'interconnexion des modules réactifs et des solveurs pour l'ensemble des propriétés. Un outil prototype, SyntHorus2, qui est une extension d'HORUS, a été mis développé. Il prend les propriétés PSL comme entrées et génère le code VHDL synthétisable du circuit. En outre, il génère des propriétés complémentaires pour vérifier si l'ensemble des spécifications est cohérent et complet. La méthode est efficace et synthétise des circuits de commande en quelques secondes. Les résultats que nous avons obtenus sur des jeux d'essais classiques montrent que notre technique compile les propriétés plus efficacement que les outils prototypes qui l'ont précédée. / The work presented in this thesis aims at automatically prototype communication and control designs from declarative temporal specifications. From a set of PSL properties, we produce a synthesizable RTL design automatically. The proposed method is modular, in contrast to previously published methods that were based on automata theory. From each property, we produce a component that observes some operands and generates waveforms for the other operands: the reactant. First, a library of primitive reactants has been provided for FL and SERE operators. To this goal, a dependency relation is defined for each operator that expresses the dependency among its operands using the operator's semantics. Then, the dependency relation of each operator is interpreted as a hardware component that implements the operator: the operator's primitive reactant. Using this formalization, a method is proposed to automatically decide which signals of a property are observed and which are generated. In the cases when specifying the signal direction is not possible, a solver is implemented to identify the signal value. In addition, the way of identifying the value of the signal that is generated in several properties is addressed. The final circuit is the interconnection of the properties' reactants and solvers. A prototype tool SyntHorus2, which is an extension to HORUS, has been developed. It takes PSL properties as its inputs, and generates the synthesizable VHDL code of the circuit. In addition, it generates some complementary properties to verify if the set of specification is coherent and complete. The method is efficient, and synthesizes control circuits in a few seconds. Results obtained on classical benchmarks show that our technique compiles properties more efficiently than previous prototype tools.

Sustainable growth and development in a society requires energy supply that is efficient, affordable, readily available and, in the long term, sustainable without causing negative societal impacts, such as environmental pollution and its attendant consequences. In this respect, proton exchange membrane (PEM) fuel cells offer a promising alternative to existing conventional fossil fuel sources for transport and stationary applications due to its high efficiency, low-temperature operation, high power density, fast start-up and its portability for mobile applications. However, to fully harness the potential of PEM fuel cells, there is a need for improvement in the operational performance, durability and reliability during usage. There is also a need to reduce the cost of production to achieve commercialisation and thus compete with existing energy sources. The present study has therefore focused on developing novel approaches aimed at improving output performance for this class of fuel cell. In this study, an innovative combined numerical computation and optimisation techniques, which could serve as alternative to the laborious and time-consuming trial-and-error approach to fuel cell design, is presented. In this novel approach, the limitation to the optimal design of a fuel cell was overcome by the search algorithm (Dynamic-Q) which is robust at finding optimal design parameters. The methodology involves integrating the computational fluid dynamics equations with a gradient-based optimiser (Dynamic-Q) which uses the successive objective and constraint function approximations to obtain the optimum design parameters. Specifically, using this methodology, we optimised the PEM fuel cell internal structures, such as the gas channels, gas diffusion layer (GDL) - relative thickness and porosity - and reactant gas transport, with the aim of maximising the net power output. Thermal-cooling modelling technique was also conducted to maximise the system performance at elevated working temperatures. The study started with a steady-state three-dimensional computational model to study the performance of a single channel proton exchange membrane fuel cell under varying operating conditions and combined effect of these operating conditions was also investigated. From the results, temperature, gas diffusion layer porosity, cathode gas mass flow rate and species flow orientation significantly affect the performance of the fuel cell. The effect of the operating and design parameters on PEM fuel cell performance is also more dominant at low operating cell voltages than at higher operating fuel cell voltages. In addition, this study establishes the need to match the PEM fuel cell parameters such as porosity, species reactant mass flow rates and fuel gas channels geometry in the system design for maximum power output. This study also presents a novel design, using pin fins, to enhance the performance of the PEM fuel cell through optimised reactant gas transport at a reduced pumping power requirement for the reactant gases. The results obtained indicated that the flow Reynolds number had a significant effect on the flow field and the diffusion of the reactant gas through the GDL medium. In addition, an enhanced fuel cell performance was achieved using pin fins in a fuel cell gas channel, which ensured high performance and low fuel channel pressure drop of the fuel cell system. It should be noted that this study is the first attempt at enhancing the oxygen mass transfer through the PEM fuel cell GDL at reduced pressure drop, using pin fin. Finally, the impact of cooling channel geometric configuration (in combination with stoichiometry ratio, relative humidity and coolant Reynolds number) on effective thermal heat transfer and performance in the fuel cell system was investigated. This is with a view to determine effective thermal management designs for this class of fuel cell. Numerical results shows that operating parameters such as stoichiometry ratio, relative humidity and cooling channel aspect ratio have significant effect on fuel cell performance, primarily by determining the level of membrane dehydration of the PEM fuel cell. The result showed the possibility of operating a PEM fuel cell beyond the critical temperature ( 80„aC), using the combined optimised stoichiometry ratio, relative humidity and cooling channel geometry without the need for special temperature resistant materials for the PEM fuel cell which are very expensive. In summary, the results from this study demonstrate the potential of optimisation technique in improving PEM fuel cell design. Overall, this study will add to the knowledge base needed to produce generic design information for fuel cell systems, which can be applied to better designs of fuel cell stacks. / Thesis (PhD)--University of Pretoria, 2012. / Mechanical and Aeronautical Engineering / unrestricted

Immunoassays basieren auf der Anwendung von Antikörpern, welche selektiv den zu messenden Analyten binden. Die Richtigkeit der erhaltenen Ergebnisse hängt maßgeblich von der Selektivität der Antikörper ab und kann durch Interferenzen gestört werden. In dieser Arbeit wurde eine Methode entwickelt, bei der die Probe mittels Hochleistungsflüssigkeitschromatographie (LC) in Fraktionen aufgetrennt wird und diese Fraktionen anschließend mittels Enzyme-linked Immunosorbent Assay (ELISA) vermessen werden. Dieses Verfahren wurde als LC-ELISA bezeichnet. Das erhaltene Profil aus im ELISA gemessener Analytkonzentration in Abhängigkeit von der Elutionszeit wurde als LC-ELISAgramm bezeichnet und bietet die Möglichkeit, Interferenzen zu erkennen, welche beim ELISA unentdeckt bleiben. Als Modellanalyten für die zu untersuchenden ELISAs dienten Sulfamethoxazol (SMX), Carbamazepin (CBZ) und Estron (E1). Dabei wurden verschiedene Umweltmatrices wie Oberflächenwasser und Abwässer mit dem jeweiligen ELISA vermessen. Es wurde ein Ansatz zur Unterscheidung von spezifischen und unspezifischen Interferenzen in Umweltproben aufgezeigt. Durch diesen Ansatz und Anwendung der sauren Hydrolyse der Probe war es möglich, einen bisher unbekannten SMX-Metaboliten zu detektieren und dessen wahrscheinliche Kreuzreaktivität mit 460 ± 150 % abzuschätzen. Es wurde zudem ein neuer Tracer in einer linearen 13-Stufen-Synthese entwickelt, wobei neuartig die Konjugation der Peroxidase an der N1-Position des SMX erfolgte. / Immunoassays are based on the use of antibodies that selectively bind the analyte. The trueness of the results obtained depends to a great extent on the selectivity of the antibodies and can be affected by interferences. In this study, a method was developed in which the sample is separated into fractions by using high-performance liquid chromatography (LC) and these fractions are measured using an enzyme-linked immunosorbent assay (ELISA). This method was referred to as LC-ELISA. The profile obtained from the measured analyte concentration by ELISA as a function of the elution time was referred to as LC-ELISAgram and offers the possibility to detect interferences which otherwise remain undetected during the ELISA. Sulfamethoxazole (SMX), carbamazepine (CBZ) and estrone (E1) were used as model analytes for the ELISA and LC-ELISA measurements. Various environmental matrices such as surface water and wastewater were examined for their interference in the respective ELISA. The good quantification properties of the validated LC-ELISA have been used to demonstrate an approach to distinguish between specific and non-specific interferences from environmental samples. By this approach and application of acidic hydrolysis of the sample, it was possible to detect a previously unknown metabolite of SMX and estimate its cross-reactivity to probably 460 ± 150%. Furthermore, a new tracer was developed in a linear 13-step synthesis, which resulted in the novel conjugation of the peroxidase at the N1-position of SMX. The new hapten was also used for the synthesis of a novel immunogen.

Le traitement thermique des déchets municipaux suscite de plus en plus l’attention du fait des gains énergétiques et environnementaux associés. Cependant, du fait de la présence de composés chlorés (sels, plastiques) de l’acide chlorhydrique (HCl) est généralement produit lors de ce traitement et provoque des désagréments tels que la corrosion, la formation de contaminants organiques toxiques, une acidification, etc. De ce fait, le but du présent travail de thèse vise à étudier le rôle d’un réactif à base de CaO (oxyde de calcium) pour l’abattement in-situ des émissions de HCl issues du traitement thermique des déchets. Dans ce travail, l’absorption/réaction du gaz HCl par le lit catalytique de CaO a été étudiée expérimentalement et théoriquement. Tout d’abord, il a été montré que le lit de CaO conduit à un abattement significatif du HCl généré, formant une couche de CaCl2 en surface des particules de CaO. Cependant, la température opératoire est un facteur important du procédé, la capacité d’absorption de HCl diminuant de 778,9 à 173,9 mg/g-CaO en augmentant la température de 550 à 850°C. L’analyse cinétique de la réaction, en confrontant les données expérimentales à différents modèles de réaction de surface sur une particule, montre que la diffusion du gaz HCl au travers de la couche de CaCl2 (produit de la réaction de surface) est d’abord limitée par la réaction à l’interface puis par la diffusion de HCl dans cette couche poreuse en croissance. Pour simuler la génération de HCl in-situ par une source organique, la pyro-gazéification du PVC a été effectuée en présence ou en absence de CaO. Une modélisation des différentes étapes de la décomposition du PVC en présence de CaO a montré que l’énergie d’activation apparente de la réaction de déchlorination était légèrement augmentée (de 136,5 à152,6 kJ/mol) tandis que l’énergie apparente globale de la pyro-gazéification du PVC est diminuée de 197,3 à 148,9 kJ/mol en utilisant CaO. La génération in-situ de HCl a aussi été réalisée en utilisant un mélange modèle de déchets municipaux, contenant du chlore organique et inorganique. L’abattement en HCl a été évalué, et la nature chimique des goudrons a été analysée. En présence de CaO, la part de composés organiques oxygénés est réduite, améliorant ainsi la qualité des goudrons en vue d’un raffinage en bio-huile. Une approche par analyse de cycle de vie a aussi été réalisée pour la pyro-gazéification et l’incinération des déchets municipaux. La modélisation a été réalisée en envisageant 3 scénarios de déchlorination : (1) gazéification avec fusion des cendres puis une étape de traitement du chlore ex-situ à basse température, (2) gazéification suivie d’une étape d’épuration du chlore ex-situ à haute température, (3) gazéification couplée à une déchlorination in-situ en présence du réactif CaO. Ce dernier scénario hypothétique offre les meilleures performances environnementales (par exemple: acidification, réchauffement, émissions polluantes toxiques….) mais reste un modèle théorique et simplifié. / Thermal treatment of municipal solid waste (MSW) attracts increasing attention due to the associated environmental and energy benefits. However, due to the chlorinated components of the MSW (salts, plastics) hydrogen chloride (HCl) is usually generated and may cause corrosion, toxic organic contaminants formation, acidification, etc. The present study focuses on the reactivity of a calcium oxide (CaO) reactant for in-situ mitigation of released HCl from thermal treatment of MSW. In this work, sorption of HCl gas in CaO reactive bed has been experimentally and theoretically studied. First, it is shown that the use of CaO is effective to remove released HCl gas, by forming a CaCl2 layer at the surface of CaO particles. However, temperature of the reactor is a key process parameter, since the removal capacity of HCl decreases significantly from 778.9 to 173.9 mg/g-CaO with the increase of temperature from 550°C to 850°C. A kinetics analysis has been developed by comparing experimental data with models describing the reaction at the particle surface. It has been concluded that the sorption of HCl at the CaO particle surface is firstly limited by the heterogeneous gas-solid reaction, followed by the HCl diffusion through this porous growing layer. To simulate the in-situ generation of HCl from organic source, pyro-gasification of PVC has been performed with or without CaO addition. The experimental data have been then used for the modeling of the different PVC decomposition steps. Although the average apparent activation energy of pseudo dehydrochlorination reaction is increased from 136.5 kJ/mol to 152.6 kJ/mol with the addition of CaO, the apparent activation energy of the overall PVC decomposition has been decreased from 197.3 to 148.9 kJ/mol by using CaO reactant. In-situ generation of HCl from organic and inorganic sources has also been conducted using simulated MSW. HCl mitigation has been evaluated together with the chemical speciation of the produced tars. Using CaO, the amount of oxygenated organic compounds has been reduced, improving the quality of the tars for a further bio-oil upgrading. To complete the aforementioned works, life cycle assessment (LCA) of three typical pyro-gasification and incineration processes is conducted to compare their overall environmental sustainability. Moreover, pyro-gasification-based WtE systems with different dehydrochlorination strategies are further modeled: 1) conventional gasification system; 2) novel gasification coupled with ex-situ high temperature dehydrochlorination system; and 3) hypothetical gasification coupled with in-situ dehydrochlorination system. The obtained results could be applied to optimize the current waste pyro-gasification systems, with special focus on developing strategies for in-situ dehydrochlorination purpose.

Increasing interest in an effciency enhancement of existing energy sources led to an extended research in the field of thermoelectrics. Especially skutterudites with their high power factor (electric conductivity times Seebeck coefficient squared) are suitable thermoelectric materials. However, a further improvement of their thermoelectric properties is necessary. The relatively high thermal conductivity can be decreased by introducing loosely bound guest ions, whereas atom substitution or nanostructuring (as thin films) could yield an increased power factor. The present work proves the feasibility to deposit single phase skutterudite thin films by MBE technique. In this regard CoSby and FeSby film series were deposited with three different methods: i) codeposition at elevated temperatures, ii) codeposition at room temperature followed by post-annealing, and iii) modulated elemental reactant method. The structural and thermoelectric properties of these films were investigated by taking the thermal stability of the film and the substrate properties into account. Compared to the stoichiometric Sb content of skutterudites of 75 at.%, a small excess of Sb is necessary for achieving single phase skutterudite films. It was found, that the deposited single phase CoSb3 films reveal bipolar conduction (and therefore a low Seebeck coefficient), whereas FeSb3 films show p-type conduction and very promising power factors at room temperature. The need of substrates with a low thermal conductivity and a suitable thermal expansion coefficient is also demonstrated. A high thermal conductivity influences the measurements of the Seebeck coefficient and the obtained values will be underestimated by thermal shortening of the film by the substrate. If the thermal expansion coefficient of film and substrate differ strongly from each other, crack formation at the film surface was observed. Furthermore, the realization of controlled doping by substitution as well as the incorporation of guest ions was successfully shown. Hence, this work is a good starting point for designing skutterudite based thin film structures. Two successful examples for such structures are given: i) a thickness series, where a strong decrease of the resistivity was observed for films with a thickness lower than 10nm, and ii) a FexCo1-xSb3 gradient film, for which the gradient was maintained even at an annealing temperature of 400°C.

Increasing interest in an effciency enhancement of existing energy sources led to an extended research in the field of thermoelectrics. Especially skutterudites with their high power factor (electric conductivity times Seebeck coefficient squared) are suitable thermoelectric materials. However, a further improvement of their thermoelectric properties is necessary. The relatively high thermal conductivity can be decreased by introducing loosely bound guest ions, whereas atom substitution or nanostructuring (as thin films) could yield an increased power factor. The present work proves the feasibility to deposit single phase skutterudite thin films by MBE technique. In this regard CoSby and FeSby film series were deposited with three different methods: i) codeposition at elevated temperatures, ii) codeposition at room temperature followed by post-annealing, and iii) modulated elemental reactant method. The structural and thermoelectric properties of these films were investigated by taking the thermal stability of the film and the substrate properties into account. Compared to the stoichiometric Sb content of skutterudites of 75 at.%, a small excess of Sb is necessary for achieving single phase skutterudite films. It was found, that the deposited single phase CoSb3 films reveal bipolar conduction (and therefore a low Seebeck coefficient), whereas FeSb3 films show p-type conduction and very promising power factors at room temperature. The need of substrates with a low thermal conductivity and a suitable thermal expansion coefficient is also demonstrated. A high thermal conductivity influences the measurements of the Seebeck coefficient and the obtained values will be underestimated by thermal shortening of the film by the substrate. If the thermal expansion coefficient of film and substrate differ strongly from each other, crack formation at the film surface was observed. Furthermore, the realization of controlled doping by substitution as well as the incorporation of guest ions was successfully shown. Hence, this work is a good starting point for designing skutterudite based thin film structures. Two successful examples for such structures are given: i) a thickness series, where a strong decrease of the resistivity was observed for films with a thickness lower than 10nm, and ii) a FexCo1-xSb3 gradient film, for which the gradient was maintained even at an annealing temperature of 400°C.:Contents 1 Introduction 2 Nanostructured thermoelectric materials 2.1 Thermoelectric materials and ZT 2.2 Recent developments in improving ZT in thin films 3 Thermoelectric transport theory 3.1 Electronic transport coefficients 3.2 Lattice thermal conductivity 4 Skutterudites as promising thermoelectric material 4.1 CoSb3 4.1.1 Structural properties of skutterudites 4.1.2 Band structure of CoSb3 and density of states 4.1.3 Thermoelectric properties of CoSb3 4.1.4 Synthesis of CoSb3 thin films 4.2 FeSb3 4.2.1 Structural and thermoelectric properties of FeSb3 thin films 4.2.2 Synthesis of FeSb3 thin films 5 Experimental methods 5.1 Basic methods for structural characterization 5.2 Electric characterization: Resistivity and Hall measurements using van der Pauw geometry 5.3 Thermoelectric characterization (Seebeck coefficient) 5.4 Thermal characterization methods 6 Deposition of skutterudite thin films 6.1 Deposition chamber and deposition parameters 6.2 Deposition methods 6.3 Composition control of skutterudite films 7 Control of structural properties by the used deposition method 7.1 Structural properties of CoSb3 thin films 7.1.1 Crystallization characteristics of CoSb3 films 7.1.2 Comparison of films deposited with different deposition methods 7.1.3 Influence of different deposition parameters on the film properties 7.2 Structural properties of FeSb3 thin films 7.2.1 Crystallization behaviour 7.2.2 Structural properties of post-annealed Fe-Sb films prepared by codeposition 7.2.3 Influence of the heating rate on the film properties 8 CoSb3 and FeSb3 composition series 8.1 CoSby composition series 8.1.1 Films deposited at elevated temperatures 8.1.2 Annealed films 8.2 FeSby composition series 9 Influence of various substrates on the film properties 9.1 Substrate influence on the film morphology 9.2 Substrate influence on thermoelectric properties and measurements 10 FexCo1-xSb3 - controlled doping by substitution of Co with Fe 10.1 Properties of codeposited FexCo1-xSb3 films 10.2 Properties of FexCo1-xSb3 films deposited via MERM 11 Filled CoSb3 thin films 12 Examples for nanostructured thin film approaches 12.1 CoSb3 thickness series 12.2 FexCo1-xSb3 gradient films 13 Summary and Outlook