Orientador: Jorge Sidney Coli Junior / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Filosofia e Ciencias Humanas / Made available in DSpace on 2018-08-12T08:21:18Z (GMT). No. of bitstreams: 1 Philippov_Karin_M.pdf: 8422545 bytes, checksum: 40df82fcd15ed0670cc412c9a95e2836 (MD5) Previous issue date: 2008 / Resumo: A viagem de Rockwell Kent ao Brasil, em novembro de 1937, suscita uma série de questões inéditas tanto no Brasil quanto nos Estados Unidos. Assim, a presente dissertação busca pontuar e analisar todas as implicações que antecedem sua viagem de nove dias ao Brasil, como observador político, bem como abrange todos os fatos decorrentes de sua estada, os quais englobam a redação de seu relatório "Brazil and Vargas", além do início de sua amizade com Candido Portinari; a dissertação igualmente privilegia as conseqüências da viagem de Rockwell Kent ao Brasil, sempre partindo da análise dos documentos obtidos junto ao Smithsonian Institution, em Washington e ao Projeto Portinari, no Rio de Janeiro. Desse modo, tem-se um amplo campo de trabalho no qual é possível perceber as implicações de sua viagem dentro de um espectro mais amplo, envolvendo Brasil e Estados Unidos dentro do panorama intelectual, econômico, político e cultural de 1937 a 1955. / Abstract: Rockwell Kent's trip to Brazil in November, 1937, raises a series of new issues both in Brazil and the United States. Thus, this thesis aims at pointing out and analyzing all the implications preceding his nine-day trip to Brazil, as a political observer; besides, it also includes all the facts stemming from his stay, such as the making of his "Brazil and Vargas" report and the beginning of his friendship with Candido Portinari. Furthermore, this thesis studies the consequences of Rockwell Kent's trip to Brazil, based on the analysis of the documents obtained from the Smithsonian Institution, in Washington D.C, and the Portinari Project, in Rio de Janeiro. Therefore, this thesis presents a huge field of study in which it is possible to perceive the implications of such a trip within a larger scope, involving Brazil and the United States in the intellectual, economic, political and cultural panorama from 1937 to 1955. / Mestrado / Historia da Arte / Mestre em História da Arte

No description available.

No description available.

No description available.

Indiana University-Purdue University Indianapolis (IUPUI) / Zirconia (ZrO2) is an important ceramic material with a broad range of applications. Due to its high melting temperature, low thermal conductivity, and high-temperature stability, zirconia based ceramics have been widely used for thermal barrier coatings (TBCs). When TBC is exposed to thermal cycling during real applications, the TBC may fail due to several mechanisms: (1) phase transformation into yttrium-rich and yttrium-depleted regions, When the yttrium-rich region produces pure zirconia domains that transform between monoclinic and tetragonal phases upon thermal cycling; and (2) cracking of the coating due to stress induced by erosion. The mechanism of erosion involves gross plastic damage within the TBC, often leading to ceramic loss and/or cracks down to the bond coat. The damage mechanisms are related to service parameters, including TBC material properties, temperature, velocity, particle size, and impact angle. The goal of this thesis is to understand the structural and mechanical properties of the thermal barrier coating material, thus increasing the service lifetime of gas turbine engines. To this end, it is critical to study the fundamental properties and potential failure mechanisms of zirconia. This thesis is focused on investigating the structural and mechanical properties of zirconia. There are mainly two parts studied in this paper, (1) ab initio calculations of thermodynamic properties of both monoclinic and tetragonal phase zirconia, and monoclinic-to-tetragonal phase transformation, and (2) image-based finite element simulation of the indentation process of yttria-stabilized zirconia. In the first part of this study, the structural properties, including lattice parameter, band structure, density of state, as well as elastic constants for both monoclinic and tetragonal zirconia have been computed. The pressure-dependent phase transition between tetragonal (t-ZrO2) and cubic zirconia (c-ZrO2) has been calculated using the density function theory (DFT) method. Phase transformation is defined by the band structure and tetragonal distortion changes. The results predict a transition from a monoclinic structure to a fluorite-type cubic structure at the pressure of 37 GPa. Thermodynamic property calculations of monoclinic zirconia (m-ZrO2) were also carried out. Temperature-dependent heat capacity, entropy, free energy, Debye temperature of monoclinic zirconia, from 0 to 1000 K, were computed, and they compared well with those reported in the literature. Moreover, the atomistic simulations correctly predicted the phase transitions of m-ZrO2 under compressive pressures ranging from 0 to 70 GPa. The phase transition pressures of monoclinic to orthorhombic I (3 GPa), orthorhombic I to orthorhombic II (8 GPa), orthorhombic II to tetragonal (37 GPa), and stable tetragonal phases (37-60 GPa) are in excellent agreement with experimental data. In the second part of this study, the mechanical response of yttria-stabilized zirconia under Rockwell superficial indentation was studied. The microstructure image based finite element method was used to validate the model using a composite cermet material. Then, the finite element model of Rockwell indentation of yttria-stabilized zirconia was developed, and the result was compared with experimental hardness data.

No presente trabalho foi avaliado o efeito da microestrutura e da capacidade de suportar carregamento de camadas nitretadas produzidas em aços ferramenta AISI H13 e AISI D2 sobre a aderência e a resistência ao desgaste microabrasivo de revestimentos de TiN-PVD. Em cada um desses aços, foram produzidas camadas nitretadas de diferentes estruturas e espessuras, e foram determinadas experimentalmente as curvas potencial início de formação de camada branca, para a nitretação a 520oC. Para o aço ferramenta AISI H13, o emprego de tempos de pré-tratamento de nitretação mais prolongados ( aproximadamente 11 h) foi necessário para aprofundar a camada nitretada e, conseqüentemente, aumentar a capacidade de suportar carregamento dos revestimentos, evitando a formação de bordas que provocam o lascamento e a escamação das camadas de TiN. Observou-se que esse tipo de falha persiste se a zona de endurecimento for pouco profunda, uma vez que a transição de propriedades mecânicas da camada de TiN para o núcleo não nitretado continua abrupta e a capacidade de suportar carregamento da camada nitretada ainda é baixa. Por outro lado, curtos tempos de nitretação (aproximadamente 42 min.) foram suficientes para aumentar a aderência das camadas de TiN ao aço ferramenta D2, pois o núcleo não nitretado desse aço possui uma capacidade de suportar carregamento razoável. Observou-se que a resistência ao desgaste microabrasivo e a aderência dos revestimentos são prejudicadas com a presença de uma camada preta na interface camada de TiN/camada nitretada. Quando a superfície dos revestimentos é carregada, falhas do tipo “casca de ovo" facilmente ocorrem. / In this work, the influence of both the microstructure and the load-bearing capacity of nitrided layers, formed on top of AISI D2 and AISI H13 tool steels, on adhesion and wear resistance of PVD-TiN coatings was studied. The threshold nitriding potential curves for the above mentioned steels and the optimum conditions of the pre-treatments which increased the adhesion as well as the wear resistance of the PVD-TiN were determined experimentally. By using longer nitriding times (about 11 h) and lower nitrogen contents in the gas mixture (about N2-5%vol.), it was possible to minimize the pile-up degree of the TiN/H13 nitrided substrates and, consequently, the occurrence of coatings chipping. This flaw persists when the nitrided layer is thin, due to an abrupt transition of mechanical properties at the TiN coating / steel core interface. Shorter nitriding times (about 42 min.) and lower nitrogen contents (about N2-5%vol.), on the other hand, are sufficient to guarantee a better adhesion of TiN coatings on AISI D2 tool steel, as the core of such steel possesses relatively better load-bearing capacity than the AISI H13 tool steel. The presence of a black layer at the TiN/nitrided layer interface was observed in all coatings deposited over nitrided layers produced above the threshold nitriding potential curves. This layer affects adversely the wear resistance and the adhesion of the TiN coatings. When higher loads are applied on the coated surface, “egg shell" type flaws easily occur.

No presente trabalho foi avaliado o efeito da microestrutura e da capacidade de suportar carregamento de camadas nitretadas produzidas em aços ferramenta AISI H13 e AISI D2 sobre a aderência e a resistência ao desgaste microabrasivo de revestimentos de TiN-PVD. Em cada um desses aços, foram produzidas camadas nitretadas de diferentes estruturas e espessuras, e foram determinadas experimentalmente as curvas potencial início de formação de camada branca, para a nitretação a 520oC. Para o aço ferramenta AISI H13, o emprego de tempos de pré-tratamento de nitretação mais prolongados ( aproximadamente 11 h) foi necessário para aprofundar a camada nitretada e, conseqüentemente, aumentar a capacidade de suportar carregamento dos revestimentos, evitando a formação de bordas que provocam o lascamento e a escamação das camadas de TiN. Observou-se que esse tipo de falha persiste se a zona de endurecimento for pouco profunda, uma vez que a transição de propriedades mecânicas da camada de TiN para o núcleo não nitretado continua abrupta e a capacidade de suportar carregamento da camada nitretada ainda é baixa. Por outro lado, curtos tempos de nitretação (aproximadamente 42 min.) foram suficientes para aumentar a aderência das camadas de TiN ao aço ferramenta D2, pois o núcleo não nitretado desse aço possui uma capacidade de suportar carregamento razoável. Observou-se que a resistência ao desgaste microabrasivo e a aderência dos revestimentos são prejudicadas com a presença de uma camada preta na interface camada de TiN/camada nitretada. Quando a superfície dos revestimentos é carregada, falhas do tipo “casca de ovo” facilmente ocorrem. / In this work, the influence of both the microstructure and the load-bearing capacity of nitrided layers, formed on top of AISI D2 and AISI H13 tool steels, on adhesion and wear resistance of PVD-TiN coatings was studied. The threshold nitriding potential curves for the above mentioned steels and the optimum conditions of the pre-treatments which increased the adhesion as well as the wear resistance of the PVD-TiN were determined experimentally. By using longer nitriding times (about 11 h) and lower nitrogen contents in the gas mixture (about N2-5%vol.), it was possible to minimize the pile-up degree of the TiN/H13 nitrided substrates and, consequently, the occurrence of coatings chipping. This flaw persists when the nitrided layer is thin, due to an abrupt transition of mechanical properties at the TiN coating / steel core interface. Shorter nitriding times (about 42 min.) and lower nitrogen contents (about N2-5%vol.), on the other hand, are sufficient to guarantee a better adhesion of TiN coatings on AISI D2 tool steel, as the core of such steel possesses relatively better load-bearing capacity than the AISI H13 tool steel. The presence of a black layer at the TiN/nitrided layer interface was observed in all coatings deposited over nitrided layers produced above the threshold nitriding potential curves. This layer affects adversely the wear resistance and the adhesion of the TiN coatings. When higher loads are applied on the coated surface, “egg shell” type flaws easily occur.