Spelling suggestions: "subject:"rooms""
191 |
Experimental Investigation Of The Seismic Behavior Of Panel BuildingsYuksel, Bahadir S. 01 September 2003 (has links) (PDF)
Shear-wall dominant multi-story reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In 1999, two severe urban earthquakes struck Kocaeli and Dü / zce provinces in Turkey with magnitudes (Mw) 7.4 and 7.1, respectively. These catastrophes caused substantial structural damage, casualties and loss of lives. In the aftermath of these destructive earthquakes, neither demolished nor damaged shear-wall dominant buildings constructed by tunnel form techniques were reported. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code and the Turkish Seismic Code present limited information for their design criteria. This study presents experimental investigation of the panel unit having H-geometry.
To investigate the seismic behavior of panel buildings, two prototype test specimens which have H wall design were tested at the Structural Mechanics Laboratory at METU. The experimental work involves the testing of two four-story, 1/5-scale reinforced concrete panel form building test specimens under lateral reversed loading, simulating the seismic forces and free vibration tests. Free vibration tests before and after cracking were done to assess the differences between the dynamic properties of uncracked and cracked test specimens.
A moment-curvature program named Waller2002 for shear walls is developed to include the effects of steel strain hardening, confinement of concrete and tension strength of concrete. The moment-curvature relationships of panel form test specimens showed that walls with very low longitudinal steel ratios exhibit a brittle flexural failure with very little energy absorption.
Shear walls of panel form test specimens have a reinforcement ratio of 0.0015 in the longitudinal and vertical directions. Under gradually increasing reversed lateral loading, the test specimens reached ultimate strength, as soon as the concrete cracked, followed by yielding and then rupturing of the longitudinal steel. The displacement ductility of the panel form test specimens was found to be very low. Thus, the occurrence of rupture of the longitudinal steel, as also observed in analytical studies, has been experimentally verified. Strength, stiffness, energy dissipation and story drifts of the test specimens were examined by evaluating the test results.
|
192 |
Greening the City: Exploring Health, Well-being, Green Roofs, and the Perception of Nature in the WorkplaceLoder, Angela 06 December 2012 (has links)
This five-paper thesis explores office workers perceptions of green roofs and how this influences their health/well-being in Toronto and Chicago. Paper 1 examines the underlying paradigms and world-views of major research programs that look at the human relationship to nature and health/well-being, showing that despite some convergence between their methods and integration of different paradigms, continued differences and lack of clarity on the normative assumptions underlying each approach leads to confusion in the specification of ‘nature’ in health/well-being and place research. Paper 2 is a comparative analysis of the implementation of green roof policies in Toronto and Chicago. Paper 2 demonstrates the importance of ‘selling’ green roofs by linking them to larger environmental programs and of the municipal power structure that influences how and if environmental programs are implemented. Paper 3 examines the awareness, attitudes, and feelings towards green roofs by office workers with access to them (visual or physical) from their workplace in Toronto and Chicago. Using a phenomenological analysis of semi-structured interviews (n=55), Paper 3 shows that the hinterland, expectations of different kinds of ‘nature’ and aesthetics in the city, and access all influence perceptions of green roofs and sense of place. Paper 4 explores office workers awareness of and attitudes towards green roofs and the possible influence on their well-being in Toronto and Chicago from a large survey (n = 903). Participants showed a high literacy on the environmental benefits of green roofs. Chi-square analysis showed mixed results for health, but a significant association between visual access to a green roof and improved concentration. Paper 5 tests whether the relationship found in Paper 4, improved concentration with visual access, was still significant when other confounding variables were added to the model. Using a logistic regression on the same survey population (subset n =505), results found that concentration was no longer significant but that there was a trend towards improved concentration.
|
193 |
An Investigation On The Performance Of Aluminium Panel Curtain Wall System In Relation To The Facade TestsSengun Dogan, Banu Nur 01 January 2013 (has links) (PDF)
Extruded aluminium has become the material of choice for building envelope owing to its lightness, wide range of possibilities for profile design, durability and the eco-friendly attitude. In the light of recent technological developments in metal and glass industries, there has been various new approaches towards aluminum curtain wall systems which are mostly preferred by architects in high-rise buildings. Herein, the panel curtain wall system is determined as innovative and the modern aluminium curtain wall system. Furthermore, in the recent prestigious high-rise buildings, the demand of the architects and the contractors begins to replace the conventional curtain wall system which is constructed via stick construction technique, with panel curtain wall system which is applied to the building in a modular form . The main aim of this study is to investigate why the panel curtain wall system comes to the forefront especially for high-rise buildings. Accordingly, the basic architectural, structural and constructional design principles of unitized aluminium curtain wall systems are defined, analyzed and then the advantages and disadvantages of this system are pointed out from an architectural point of view.
In order to evaluate the performance of panel curtain wall system against environmental factors, the facade tests, which are new and still-developing methods in Turkey, are used. The extensive facade tests have been conducted on full-scale specimen under field conditions reproduced in an equipped test chamber by authorized facade testing company and the assessment of this curtain wall performance was provided accordance with related standards. The two story full-size specimen, was 3000 mm to 7600 mm, belongs to one of the prestigious office towers constructed in Istanbul. The facade tests conducted to the specimen include watertightness, air permeability, wind resistance and building movement tests.
In this study, the performance criteria of panel curtain wall system were investigated not only against environmental factors but also against human sourced factors. It is expected that this study will provide a guideline for system designers on the future research and development phase and for architects on the selection of curtain wall systems for their buildings due to the conducted test results and other advantages taken throughout this study.
|
194 |
Construction Process And Techniques Of Traditional Houses In Tarakli/sakarya: An Introductory Model For Web-based Gis ApplicationsOzyer, Hafize Bilge 01 December 2008 (has links) (PDF)
Historic towns and historic buildings are important witnesses of the past cultures and
civilizations. Their sustainability and transfer to the next generations require
continuous maintenance and repair interventions which should be compatible with
their original construction techniques, details and materials. In order to define proper
interventions to a historic building, it is necessary to understand how and from what
it is built. Therefore, traditional construction materials, detailings and techniques
should be well understood prior to any kind of intervention to a historic building. The
objective of this study is, first of all, to provide a body of knowledge on traditional
construction process and techniques / then, to store, structure, process, represent and
share this knowledge in a systematic and controlled way by means of a web based
GIS portal.
In this respect, traditional timber framed houses of Tarakli in Sakarya has been
chosen as the case study, on account of being one of the significant historical towns
in our country where the tissue together with historical building is still conserved.
For this study, among the applications of GIS technology, Web-based GIS has been
determined as the most effective and functional tool in order to develop an online
information portal for storing, displaying the collected raw data and sharing with
other users as utilizable information.
|
195 |
Ovidkommande dagvatten i spillvattenledningar - En fallstudie av dagvattenhantering i ett bostadsområde i Hok / Irrelevant stormwater in wastewater pipes - A case study of stormwater management in a residential area in HokEl Masry, Josef, Alkazragi, Miher January 2015 (has links)
No description available.
|
196 |
An Appraisal Of Structural Glass Wall Systems With Emphasis On Spider Fitting DetailsBuyukkilic, Salih Gokhan 01 January 2004 (has links) (PDF)
The technological and innovational developments in steel and glass industries has enabled designers to create completely transparent faç / ades. Building faç / ade articulations designed to attain maximum transparency, have thus been executed with the contribution of elegant steel supporting systems, having heavy load bearing capacities, by minimizing the dimensions of structural systems. The aim of this study was to define, analyze and evaluate the accumulated knowledge on structural glass wall systems in general, with particular emphasis on those that may be denoted as & / #8218 / spider& / #8482 / glass fitting elements for potential applications, to formulate a design guide for professional designers. Hence, the primary elements of the system / the support structure, glass, glass connection joints and the other secondary elements have been evaluated within the architectural context.
In the second part of the study, glass connection fitting elements were examined. Additionally the products developed by the manufacturing firms and commonly used in various projects were evaluated. Thereafter, whole document, data, photos of the spider fittings were combined in a spider fitting selection table, prepared and created by the author, which describes the types of spider fittings in detail.
Finally, technical adequacy, experience, level of organization and workmanship within the context of Turkey, to evaluate the level of knowledge, were studied. In this regard, the glass wall facade the Akman Condomunium Business Center-Medicorium building, constructed with local materials and local manufacturing companies, was examined and compared with the Boeing Headquarters building in USA, which was constructed with a similair glass wall facade system.
|
197 |
Análise do projeto de estruturas metálicas espaciais: ênfase em coberturas / Analysis of design of space steel structures: emphasis in roofsArnaldo Nascimento de Souza 03 September 2002 (has links)
As estruturas metálicas espaciais de cobertura apresentam aspectos diferenciados de projeto. Existem diversos arranjos geométricos possíveis para estas estruturas, cuja escolha está associada, entre outros fatores, às formas e dimensões do contorno, aos pontos de apoio e aos sistemas de conexões empregadas. Neste trabalho, foi analisado o projeto destas estruturas, abordando aspectos históricos, os sistemas de ligação, o comportamento estrutural, as particularidades de projeto, e realizando uma análise numérica de diferentes arranjos geométricos. Foram analisados 27 arranjos geométricos quadrados (66 m x 66 m) e 6 arranjos geométricos retangulares (186 m x 66 m), todos os vãos centrais de 60 m, e com variações na quantidade e posicionamento dos apoios, na disposição das barras do reticulado, na altura e nas dimensões dos módulos. Adotou-se o modelo de treliça ideal em análise elástica linear (teoria de primeira ordem). Com os resultados dos processamentos, realizou-se uma comparação entre os modelos, abrangendo os seguintes aspectos: quantidade de nós e barras, consumo de material, deslocamentos máximos, reações de apoio máximas e esforços internos máximos. O fator que causou maior influência no comportamento dos arranjos analisados foi a disposição dos apoios. / The roofing space steel structures have differentiated aspects of design. There are many types of arrangements to these structures, and the choice is associate, among other factors, with the shapes e dimensions of the boundary, with the points of support and with the connection systems employed. In this work was analysed the design of these structures, including the historical aspects, the connection systems, the structural behaviour, the particulars aspects of the design, and a numerical analysis of differents arrangements. Twenty seven square structures (66 m x 66 m) and six rectangular structures (186 m x 66 m) were analysed, all them with 60 m span, and variations in the amount and position of supports, in the member arrangement, in the depth and in the node spacing. These structures were analysed adopting the ideal truss model with elastic linear behaviour. With the results were made a comparison between the arrangements that reports these aspects: amount of nodes and members, material consumption, displacements, support reactions and internal forces. The factor that caused the biggest influence in the behaviour of the space structures analysed was the amount and position of supports.
|
198 |
Contêineres metálicos para canteiros de obras: análise experimental de desempenho térmico e melhorias na transferência de calor pela envoltória. / Metallic containers for construction sites: experimental analysis of thermal performance and improvements in heat transfer through the envelope.Debora Cristina Rosa Faria da Costa 01 September 2015 (has links)
Os contêineres metálicos foram desenvolvidos para a utilização no setor de logística e transporte, mas por sua escala adaptável à das edificações e pela mobilidade e praticidade de instalação, tiveram sua utilização apropriada também pelo setor da construção civil. Essas instalações possuem diversas qualidades ambientalmente amigáveis, mas seu aspecto térmico é extremamente insuficiente: sem isolamento térmico, demandam alta carga térmica de refrigeração e aquecimento, no verão e inverno, respectivamente e, consequentemente, um alto consumo energético. Tal característica foi crucial para que se determinassem como objetivos da presente pesquisa investigar o comportamento térmico dessas construções metálicas, avaliar seus parâmetros de desempenho, conforto e estresse térmicos, por meio de uma ampla coleta de dados experimentais. O experimento com duração de um ano - contou com três tipologias de contêiner em escala real, sendo o primeiro em aço Tipo X sem isolamento térmico, o segundo com um isolamento térmico para o fenômeno da condução e o terceiro com isolamento térmico para o fenômeno da radiação. Os diferentes tipos de tratamentos térmicos proporcionaram melhorias à envoltória dos contêineres, chegando a uma diferença nas temperaturas internas de até 9 °C. Constatou-se a extrema necessidade de adequação do tipo de isolamento térmico dos contêineres ao uso a que tais instalações se destinam escritório ou alojamento, no caso dos canteiros de obras para que as características da envoltória minimizem de fato a demanda ou mesmo atinjam a eliminação da necessidade de condicionamento artificial. / Metal containers were developed to logistics and transportation sector, but as a result of their suitable scale to human occupation, and their mobility and installation convenience, their use was adopted by the construction sector. These installations have many environmentally friendly characteristics, but their thermal performance is extremely unsuitable for habitation: without thermal insulation, the containers have high cooling and heating thermal load, in summer and winter, respectively, and consequently, to achieve thermal comfort, a substantial amount of energy is consumed. This feature was important to determine that the researchs objectives were to investigate metallic constructions thermal performance, calculate their thermal performance parameters, thermal comfort and thermal stress through a wide collection of experimental data. The experiment with duration of one year was conducted in three real scale containers: all of them made of steel (called steel Type X): the first one had no thermal insulation, the second one had insulation for thermal conduction, and the third had a thermal barrier for radiation. This different types of thermal treatment provided improvement to the containers envelopes, achieving a difference in internal temperatures about 9 °C. The findings reveal that thermal insulation needs to correctly respond to the containers intended use office or accommodation, in the case of construction sites so that the envelopes characteristics can have an impact on minimizing energy demand or even eliminate the containers need for artificial heating and cooling.
|
199 |
Tetos verdes e políticas públicas: uma abordagem multifacetada / Green roofs and public policy: a multifaceted approachBruno Henrique Emmanuel Mendes 26 May 2014 (has links)
\"Tetos verdes\", ou a colocação de vegetação sobre coberturas de edifícios, têm se mostrado importantes ferramentas na mitigação de diversos problemas ambientais urbanos. Porém, seus benefícios coletivos apenas se tornam significativos após sua instalação em massa, sendo uma estratégia ambiental altamente dependente do agente privado -- os proprietários. Neste trabalho, buscou-se uma abordagem interdisciplinar com a Economia Ambiental e Comportamental, de modo a revelar os mecanismos de tomada de decisão dos indivíduos, tanto motivações econômicas (como sanções e subsídios), quanto motivações ditas \"irracionais\", como a imitação de comportamento. Depois, reconhecendo os tetos verdes como soluções polivalentes, faz-se uma abordagem múltipla para seu encaixe em políticas públicas existentes: clima urbano, economia de energia, poluição atmosférica, gerenciamento de águas pluviais e biodiversidade, cada uma envolvendo uma breve descrição da teoria e de políticas públicas existentes, desde o contexto mundial até o município de São Paulo. Como estudo de caso, aplica-se o índice ambiental alemão BFF (Biotopflächenfaktor, fator de superfícies ecológicas) a algumas tipologias marcantes de São Paulo, e conclui-se que o índice pode ser importante ferramenta na fomentação não só de tetos verdes, como de outras soluções ambientais de natureza pulverizada, devido à sua flexibilidade e facilidade de aplicação, podendo ser ajustada à realidade do município para melhores resultados. / The placement of vegetation on top of buildings, or \"green roofs\", has been shown to be an important mitigation tool for several environmental problems in cities. However, their collective benefits become more significant with widespread adoption, thus depending heavily on private agents, the building owners. This research took an interdisciplinary approach, making use of Environmental and Behavioral Economics in order to reveal the mechanisms that guide an individual\'s decision making process, including \"rational\" economic motivations (such as sanctions and subsidies) as well as \"irrational\" motivations, such as imitation of peers. Recognizing green roofs as versatile solutions, a multifaceted approach is taken to assess their suitability for inclusion into existing public policy; the approaches include urban climate, energy efficiency, air pollution, stormwater management, and biodiversity, each with a brief description of the theory and existing public policy, at several scales, from a global context to the Municipality of São Paulo. As a case study, the German environmental index BAF (biotope area factor) is applied to one block in different development typologies in Sao Paulo. It is concluded that the index could be an important tool for fostering not only green roofs, but many other pulverized environmental solutions, thanks to its flexibility and ease of implementation. For even better results, there is the possibility of carefullyadjusting the BAF index to Sao Paulo\'s reality.
|
200 |
Análise de desempenho térmico de telhas de fibrocimento tratadas com revestimentos brancos e submetidas à aspersão de água / Analysis thermal performance of fiber cement tiles treated with white coatings and submitted to water sprayingTeixeira, Carla Fernanda Barbosa, 1977- 06 May 2013 (has links)
Orientador: Lucila Chebel Labaki. / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo / Made available in DSpace on 2018-08-23T11:44:35Z (GMT). No. of bitstreams: 1
Teixeira_CarlaFernandaBarbosa_D.pdf: 4846787 bytes, checksum: a2bbec42880bcecfdd43b8f22e0fecf7 (MD5)
Previous issue date: 2013 / Resumo: A busca por materiais, tecnologias ou meios que tornem as edificações mais eficientes energeticamente é uma meta de pesquisadores, educadores e projetistas não só no Brasil, mas também no mundo. O uso de cores claras em coberturas tem sido bastante estudado como estratégia de resfriamento para climas quentes. Este trabalho tem como objetivo analisar o desempenho térmico de acabamentos de cor branca em coberturas e estimar o consumo de energia para um ambiente com cobertura branca. Adicionado ao emprego de acabamentos refletivos, empregou-se a aspersão de água pluvial sobre os acabamentos empregados. A caracterização do desempenho de acabamentos de tinta na cor branca requisitou a realização de ensaios para determinar as características dos acabamentos nas superfícies das telhas: emissividade, refletância solar e absorção de água aspergida. Para tanto, a revisão bibliográfica do assunto foi necessária para investigar metodologias aplicadas in pesquisas realizadas no mundo. Em telhas de fibrocimento foram aplicadas tintas imobiliárias comuns (de diferentes composições químicas, porém de mesma cor branca) associadas à aspersão de água e expostas a intempéries ambientais. Temperaturas superficiais internas das telhas e variáveis meteorológicas foram coletadas e analisadas, conjuntamente com dados dos ensaios de refletância solar, emissividade térmica e absorção de água na superfície das telhas de fibrocimento. Os resultados para a técnica refletiva de acabamentos de cor clara comprovaram as expectativas, no entanto, quando esta técnica foi associada à aspersão de água nas superfícies, os resultados foram otimizados. Esses resultados ilustram a necessidade da atenção na especificação do tipo de acabamento branco. Estimou-se, através de simulação térmica, a influência do acabamento branco no consumo de energia anual de um ambiente. O propósito deste trabalho é contribuir com informações adicionais em relação ao acabamento de cor branca, atenuando as temperaturas da cobertura de uma edificação, como demonstrar que o emprego de água pluvial pode atenuar o volume escoado pelas vias na estação chuvosa / Abstract: The search for materials, technologies and ways that can get constructions more energy efficient has been a concern of researches, educators and designers not only in Brazil, but also in the world. The use of light colors on roofing has been studied a lot; like cooling strategy for hot climates. The aim of this work is to analyze thermal performance of white coatings on roofing and to estimate energy savings in a room with white coating on roofing. Evaporative cooling, added to reflective cooling, was used through rain-water spraying on coating surfaces. Some testing on coatings as thermal emissivity, solar reflectance and absorption of sprayed water were requested for characterization of coatings thermal performance. In consequence of that literature review related to these themes was necessary to investigate methodologies applied in researches which have been done in the world. Commercial and ordinary paintings (of different chemical compositions, but with same color: white) were applied on fiber cement tiles in association to water spraying in weather conditions. Inside-surface temperatures and meteorological data were collected and analyzed together with solar reflectance, thermal emissivity and water absorption by tile coatings. Results of reflective technique proved expectations and illustrated that some attention is requested to choose the kind of white painting. However, when these coatings received water spraying on surfaces, they got the best results. The white coatings influences were considered through an annual thermal simulation energy saving. This work has the purpose to contribute with existing additional information in relation to white painting available, in order to get less roofing temperatures as well as to show that the rain water usage could be a tool for decreasing drained water on streets in rainy season / Doutorado / Arquitetura, Tecnologia e Cidade / Doutora em Arquitetura, Tecnologia e Cidade
|
Page generated in 0.0243 seconds