We report the use of thin film poly(dimethylsiloxane) (PDMS) prints for the arrayed mass production of highly uniform 3-D human HT29 colon carcinoma spheroids. The spheroids have an organotypic density and, as determined by 3-axis imaging, were genuinely spherical. Critically, the array density impacts growth kinetics and can be tuned to produce spheroids ranging in diameter from 200 to 550 µm. The diffusive limit of competition for media occurred with a pitch of ≥1250 µm and was used for the optimal array-based culture of large, viable spheroids. During sustained culture mass transfer gradients surrounding and within the spheroids are established, and lead to growth cessation, altered expression patterns and the formation of a central secondary necrosis. These features reflect the microenvironment of avascularised tumours, making the array format well suited for the production of model tumours with defined sizes and thus defined spatio-temporal pathophysiological gradients. Experimental windows, before and after the onset of hypoxia, were identified and used with an enzyme activity-based viability assay to measure the chemosensitivity towards irinotecan. Compared to monolayer cultures, a marked reduction in the drug efficacy towards the different spheroid culture states was observed and attributed to cell cycle arrest, the 3-D character, scale and/or hypoxia factors. In summary, spheroid culture using the array format has great potential to support drug discovery and development, as well as tumour biology research. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Iron-mediated oxidative cyclisation provides an efficient approach to pyrano[3,2-a]carbazole alkaloids. Thus, improved routes to girinimbine and murrayacine as well as the first total syntheses of O-methylmurrayamine A and 7-methoxymurrayacine are reported. Asymmetric epoxidation of girinimbine led to (−)-trans-dihydroxygirinimbine and the assignment of its absolute configuration. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

The vibrational wave-packet dynamics of diatomic rubidium molecules (Rb2) in triplet states formed on the surface of superfluid helium nanodroplets is investigated both experimentally and theoretically. Detailed comparison of experimental femtosecond pump–probe spectra with dissipative quantum dynamics simulations reveals that vibrational relaxation is the main source of dephasing. The rate constant for vibrational relaxation in the first excited triplet state 13Σ+g is found to be constant γ ≈ 0.5 ns−1 for the lowest vibrational levels v [less, similar] 15 and to increase sharply when exciting to higher energies. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

The electronic structure of the zero-gap two-dimensional graphene has a charge neutrality point exactly at the Fermi level that limits the practical application of this material. There are several ways to modify the Fermi-level-region of graphene, e.g. adsorption of graphene on different substrates or different molecules on its surface. In all cases the so-called dispersion or van der Waals interactions can play a crucial role in the mechanism, which describes the modification of electronic structure of graphene. The adsorption of water on graphene is not very accurately reproduced in the standard density functional theory (DFT) calculations and highly-accurate quantum-chemical treatments are required. A possibility to apply wavefunction-based methods to extended systems is the use of local correlation schemes. The adsorption energies obtained in the present work by means of CCSD(T) are much higher in magnitude than the values calculated with standard DFT functional although they agree that physisorption is observed. The obtained results are compared with the values available in the literature for binding of water on the graphene-like substrates. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Molecular docking has been extensively applied in virtual screening of small molecule libraries for lead identification and optimization. A necessary prerequisite for successful differentiation between active and non-active ligands is the accurate prediction of their binding affinities in the complex by use of docking scoring functions. However, many studies have shown rather poor correlations between docking scores and experimental binding affinities. Our work aimed to improve this correlation by implementing a multipose binding concept in the docking scoring scheme. Multipose binding, i.e., the property of certain protein-ligand complexes to exhibit different ligand binding modes, has been shown to occur in nature for a variety of molecules. We conducted a high-throughput docking study and implemented multipose binding in the scoring procedure by considering multiple docking solutions in binding affinity prediction. In general, improvement of the agreement between docking scores and experimental data was observed, and this was most pronounced in complexes with large and flexible ligands and high binding affinities. Further developments of the selection criteria for docking solutions for each individual complex are still necessary for a general utilization of the multipose binding concept for accurate binding affinity prediction by molecular docking.

Treatment of the diethyl ester of o-phenylenebis(oxamic acid) (opbaH2Et2, 1) with 5/6 equivalent of MeNH2 in abs. EtOH results in the exclusive formation of the ethyl ester of o-phenylene(N′-methyl oxamide)(oxamic acid) (opooH3EtMe, 2) in ca. 50% yield. Treatment of 2 with four equivalents of [Me4N]OH followed by the addition of Cu(ClO4)2·6H2O gave [Me4N]2[Cu(opooMe)]·H2O (3A) in ca. 80% yield. As 3A appears to be a hygroscopic solid, the related [nBu4N]+ salts [nBu4N]2[M(opooMe)]·H2O (M = Cu (3B), Ni (4)) have been synthesized. By addition of two equivalents of [Cu(pmdta)(NO3)2] to a MeCN solution of 3B the novel asymmetric trinuclear complex [Cu3(opooMe)(pmdta)2](NO3)2 (5) could be obtained in ca. 90% yield. Compounds 2, 3A, 3B, 4 and 5 have been characterized by elemental analysis and NMR/IR spectroscopy. Furthermore, the solid state structures of 3A in the form of [Me4N]2[Cu(opooMe)]·MeOH (3A′), 3B in the form of [nBu4N]2[Cu(opooMe)] (3B′), 4 in the form of [nBu4N]2[Ni(opooMe)]·1.25H2O (4′) and 5 in the form of [Cu3(opooMe)(pmdta)2] (NO3)2·3MeCN (5′), respectively, have been determined by single-crystal X-ray diffraction studies. By controlled cocrystallization, diamagnetically diluted 3B (1%) in the host lattice of 4 (99%) in the form of single crystals have been made available, allowing single crystal EPR studies to extract all components of the g-factor and the tensors of onsite CuA and transferred NA hyperfine interaction. Out of these studies the spin density distribution of the [Cu(opooMe)]2− complex fragment could be determined. The magnetic properties of 5 were studied by susceptibility measurements versus temperature. An intramolecular J parameter of −65 cm−1 has been obtained, unexpectedly, as 5 should possess two different J values due to its two different spacers between the adjacent CuII ions, namely an oxamate (C2NO3) and an oxamidate (C2N2O2) fragment. This unexpected result is explained by a summarizing discussion of the experimentally obtained EPR results (spin density distribution) of 3B, the geometries of the terminal [Cu(pmdta)]2+ fragments of 5 determined by X-ray crystallographic studies and accompanying quantum chemical calculations of the spin density distribution of the mononuclear [Cu(opooMe)]2− and of the magnetic exchange interactions of trinuclear [Cu3(opooMe)(pmdta)2]2+ complex fragments. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

A tutorial review on cellular as well as nanoporous carbides covering their structure, synthesis and potential applications. Especially new carbide materials with a hierarchical pore structure are in focus. As a central theme silicon carbide based materials are picked out, but also titanium, tungsten and boron carbides, as well as carbide-derived carbons, are part of this review. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

This critical review summarizes recent developments in the fabrication of patterned polymer brushes. As top-down lithography reaches the length scale of a single macromolecule, the combination with the bottom-up synthesis of polymer brushes by surface-initiated polymerization becomes one main avenue to design new materials for nanotechnology. Recent developments in surface-initiated polymerizations are highlighted along with diverse strategies to create patterned polymer brushes on all length scales based on irradiation (photo- and interference lithography, electron-beam lithography), mechanical contact (scanning probe lithography, soft lithography, nanoimprinting lithography) and on surface forces (capillary force lithography, colloidal lithography, Langmuir–Blodgett lithography) (116 references). / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Ionic liquids (ILs) have made a great impact on materials science and are being explored for potential applications in several disciplines. In this article, we briefly highlight the current state-of-the-art techniques employing ILs as new crystallisation media, working as neutral solvent, template or charge compensating species. The use of an IL as environmental friendly solvent offers many advantages over traditional crystallisation methods. The change from molecular to ionic reaction media leads to new types of materials being accessible. Room temperature ILs have been found to be excellent solvent systems for the crystallisation of a wide range of substances and morphologies ranging from nanoscopic crystals to micro- and even to macroscopic crystals. Moreover, high temperature routes, such as crystallisation from melts or gas phase deposition, have been replaced by convenient room or low temperature syntheses, employing ILs as reaction media. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Lab-on-a-chip (LOC) technology has blossomed into a major new technology fundamentally influencing the sciences of life and nature. From a systemic point of view however, microfluidics is still in its infancy. Here, we present the concept of a microfluidic central processing unit (CPU) which shows remarkable similarities to early electronic Von Neumann microprocessors. It combines both control and execution units and, moreover, the complete power supply on a single chip and introduces the decision-making ability regarding chemical information into fluidic integrated circuits (ICs). As a consequence of this system concept, the ICs process chemical information completely in a self-controlled manner and energetically self-sustaining. The ICs are fabricated by layer-by-layer deposition of several overlapping layers based on different intrinsically active polymers. As examples we present two microchips carrying out long-term monitoring of critical parameters by around-the-clock sampling. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.