<p>The sigma-delta techniques for analog-to-digital conversion have for long been utilized when high precision is needed. Despite the fact that these have been realized by a numerous of different structures, the theory of how to construct a sigma-delta ADC is not very extensive.</p><p>This thesis will assume that an SFG description of the CRFB sigma-delta modulator has been designed and presents a structured method to obtain a circuit realization of the integrators in a specific modulator.</p><p>The first activity is to scale the inputs to each integrator in order to make sure that the produced outputs of each integrator is within the output-range of the OTA which is used. The next thing that is presented is an algorithmic way of descending from the SFG design of the modulator down to a switched-capacitor implementation of the system.</p><p>To be able to continue with the circuit realization, one needs to do a rigorous noise analysis of the modulator, which gives the sizes of the different capacitors in the SC-circuits. The last topic of this thesis is a method to obtain the specifications of the OTA in each integrator.</p>

The sigma-delta techniques for analog-to-digital conversion have for long been utilized when high precision is needed. Despite the fact that these have been realized by a numerous of different structures, the theory of how to construct a sigma-delta ADC is not very extensive. This thesis will assume that an SFG description of the CRFB sigma-delta modulator has been designed and presents a structured method to obtain a circuit realization of the integrators in a specific modulator. The first activity is to scale the inputs to each integrator in order to make sure that the produced outputs of each integrator is within the output-range of the OTA which is used. The next thing that is presented is an algorithmic way of descending from the SFG design of the modulator down to a switched-capacitor implementation of the system. To be able to continue with the circuit realization, one needs to do a rigorous noise analysis of the modulator, which gives the sizes of the different capacitors in the SC-circuits. The last topic of this thesis is a method to obtain the specifications of the OTA in each integrator.

Over the past decade, there has been a growing interest in the devel- opment of integrated circuits (ICs) for wearable or implantable biosensors, aiming at providing personalized healthcare services and reducing the health-care expenses. In biosensor ICs, the analog-to-digital converter (ADC) is a key building block that acts as a bridge between analog signals and digital processors. Since most of the biosensors are attached to or implanted in hu- man bodies and powered by either portable batteries or harvested energy, ultra-low-power operation is often required. The stringent power budget im- poses challenges in designing power-efficient ADCs, especially when targeting high-resolution. Among different ADC architectures, the Sigma-Delta (Σ∆) ADC has emerged as the most suitable for low-power, high-resolution appli- cations. This thesis aims to enhance the power efficiency of continuous-time (CT) incremental Σ∆ (IΣ∆) ADCs by exploring design techniques at both architectural and circuit levels. The impact of feedback DACs in CT IΣ∆ ADCs is investigated, so as to provide power-efficient feedback DAC solutions, suitable for biosensor ap- plications. Different DAC schemes are examined analytically considering the trade-off between timing error sensitivity and power consumption. The an- alytical results are verified through behavioral simulations covering both the conventional and incremental Σ∆ modes. Additionally, by considering a typi- cal biosensor application, different feedback DACs are further compared, aim- ing to offer a reference for selecting a power-efficient DAC scheme. A two-step CT IΣ∆ ADC is proposed, analyzed, implemented and tested, with the objective of offering flexible and power-efficient A/D conversion in neural recording systems. By pipelining two CT IΣ∆ ADCs, the pro- posed ADC can achieve high-resolution without sacrificing the conversion rate. Power-efficient circuits are proposed to implement the active blocks of the proposed ADC. The feasibility and power efficiency of the two-step CT IΣ∆ ADC are validated by measurement results. Furthermore, enhancement techniques from both the architecture and circuit perspectives are discussed and implemented, which are validated by post-layout simulations. A comparative study of several CT IΣ∆ ADC architectures is presented, aiming to boost the power efficiency by reducing the number of cycles per con- version while benefiting from the advantage of CT implementation. Five CT IΣ∆ ADC architectures are analyzed and simulated to evaluate their effective- ness under ideal conditions. Based on the theoretical results, a second-order CT IΣ∆ ADC and an extended-range CT IΣ∆ ADC are selected as implemen- tation case studies together with the proposed two-step CT IΣ∆ ADC. The impact of critical circuit non-idealities is investigated. The three ADCs are then implemented and fabricated on a single chip. Experimental results reveal that the three prototype ADCs improve considerably the power efficiency of existing CT IΣ∆ ADCs while being very competitive when compared to all types of the state-of-the-art IΣ∆ ADCs. / <p>QC 20150422</p>

The objective of this research is to explore high-speed analog-to-digital converters (ADCs) using silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) for wireless digital receiver applications. The stringent requirements of ADCs for the high-performance next-generation wireless digital receiver include (1) low power, (2) low cost, (3) wide input signal bandwidth, (4) high sampling rate, and (5) medium to high resolution. The proposed research achieves the objective by implementing high-performance ADC's key building blocks and integrating these building blocks into a complete sigma-delta analog-to-digital modulator that satisfies the demanding specifications of next-generation wireless digital receiver applications. The scope of this research is divided into two main parts: (1) high-performance key building blocks of the ADC, and (2) high-speed sigma-delta analog-to-digital modulator. The research on ADC's building blocks includes the design of two high-speed track-and-hold amplifiers (THA) and two wide-bandwidth comparators operating at the sampling rate > 10 GS/sec with satisfying resolution. The research on high-speed sigma-delta analog-to-digital modulator includes the design and experimental characterization of a high-speed second-order low-pass sigma-delta modulator, which can operate with a sampling rate up to 20 GS/sec and with a medium resolution. The research is envisioned to demonstrate that the SiGe HBT technology is an ideal platform for the design of high-speed ADCs.

abstract: Pulse Density Modulation- (PDM-) based class-D amplifiers can reduce non-linearity and tonal content due to carrier signal in Pulse Width Modulation - (PWM-) based amplifiers. However, their low-voltage analog implementations also require a linear- loop filter and a quantizer. A PDM-based class-D audio amplifier using a frequency-domain quantization is presented in this paper. The digital-intensive frequency domain approach achieves high linearity under low-supply regimes. An analog comparator and a single-bit quantizer are replaced with a Current-Controlled Oscillator- (ICO-) based frequency discriminator. By using the ICO as a phase integrator, a third-order noise shaping is achieved using only two analog integrators. A single-loop, singlebit class-D audio amplifier is presented with an H-bridge switching power stage, which is designed and fabricated on a 0.18 um CMOS process, with 6 layers of metal achieving a total harmonic distortion plus noise (THD+N) of 0.065% and a peak power efficiency of 80% while driving a 4-ohms loudspeaker load. The amplifier can deliver the output power of 280 mW. / Dissertation/Thesis / Ph.D. Electrical Engineering 2011

O foco desta tese é a descrição e validação de uma arquitetura de interface para processamento de sinais analógicos para SOC de sinais mistos. A abordagem proposta apresenta a possibilidade de cobertura de uma larga faixa de freqüências com performance praticamente constante associada a uma estrutura digital de programação. A premissa é usar uma célula analógica fixa e promover a configuração da aplicação no domínio digital, levando a uma arquitetura de interface de sinais mistos. O emprego de um bloco analógico fixo busca eliminar a perda inerente de performance decorrente da própria estrutura de programação em circuitos reconfiguráveis analógicos. A emprego da programação no domínio digital abre espaço para usos da vasta gama de ferramentas disponíveis para o projeto em alto nível de abstração, simulação e síntese automática para implementar a aplicação alvo com excelente predição do desempenho final. A abordagem proposta baseia-se no conceito de translação em freqüência (mixagem) do sinal de entrada seguida pela sua conversão para o domínio ΣΔ. A estrutura de processamento possibilita o emprego de um bloco analógico constante, e também, um processamento uniforme de sinais de entrada indo de DC até altas freqüências. A aplicação é configurada no domínio ΣΔ onde a performance pode ser predita de acordo com as especificações alvo. Objetivando a exploração do espaço de projeto foi desenvolvido o modelo de performance teórico e de simulação. Os modelos desenvolvidos auxiliam no também no projeto físico da interface proposta. Objetivando, tanto a validação dos modelos propostos, bem como o desenvolvimento de aplicações, foram construídos dois protótipos. São apresentados os usos da interface como um ADC paramétrico multi-banda e como um multiplicador e um somador de sinais analógicos. É proposta também uma arquitetura para uma interface analógica multi-canal. Os resultados experimentais empregados para a caracterização da interface proposta suportam as vantagens da mesma. / The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

O foco desta tese é a descrição e validação de uma arquitetura de interface para processamento de sinais analógicos para SOC de sinais mistos. A abordagem proposta apresenta a possibilidade de cobertura de uma larga faixa de freqüências com performance praticamente constante associada a uma estrutura digital de programação. A premissa é usar uma célula analógica fixa e promover a configuração da aplicação no domínio digital, levando a uma arquitetura de interface de sinais mistos. O emprego de um bloco analógico fixo busca eliminar a perda inerente de performance decorrente da própria estrutura de programação em circuitos reconfiguráveis analógicos. A emprego da programação no domínio digital abre espaço para usos da vasta gama de ferramentas disponíveis para o projeto em alto nível de abstração, simulação e síntese automática para implementar a aplicação alvo com excelente predição do desempenho final. A abordagem proposta baseia-se no conceito de translação em freqüência (mixagem) do sinal de entrada seguida pela sua conversão para o domínio ΣΔ. A estrutura de processamento possibilita o emprego de um bloco analógico constante, e também, um processamento uniforme de sinais de entrada indo de DC até altas freqüências. A aplicação é configurada no domínio ΣΔ onde a performance pode ser predita de acordo com as especificações alvo. Objetivando a exploração do espaço de projeto foi desenvolvido o modelo de performance teórico e de simulação. Os modelos desenvolvidos auxiliam no também no projeto físico da interface proposta. Objetivando, tanto a validação dos modelos propostos, bem como o desenvolvimento de aplicações, foram construídos dois protótipos. São apresentados os usos da interface como um ADC paramétrico multi-banda e como um multiplicador e um somador de sinais analógicos. É proposta também uma arquitetura para uma interface analógica multi-canal. Os resultados experimentais empregados para a caracterização da interface proposta suportam as vantagens da mesma. / The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

O foco desta tese é a descrição e validação de uma arquitetura de interface para processamento de sinais analógicos para SOC de sinais mistos. A abordagem proposta apresenta a possibilidade de cobertura de uma larga faixa de freqüências com performance praticamente constante associada a uma estrutura digital de programação. A premissa é usar uma célula analógica fixa e promover a configuração da aplicação no domínio digital, levando a uma arquitetura de interface de sinais mistos. O emprego de um bloco analógico fixo busca eliminar a perda inerente de performance decorrente da própria estrutura de programação em circuitos reconfiguráveis analógicos. A emprego da programação no domínio digital abre espaço para usos da vasta gama de ferramentas disponíveis para o projeto em alto nível de abstração, simulação e síntese automática para implementar a aplicação alvo com excelente predição do desempenho final. A abordagem proposta baseia-se no conceito de translação em freqüência (mixagem) do sinal de entrada seguida pela sua conversão para o domínio ΣΔ. A estrutura de processamento possibilita o emprego de um bloco analógico constante, e também, um processamento uniforme de sinais de entrada indo de DC até altas freqüências. A aplicação é configurada no domínio ΣΔ onde a performance pode ser predita de acordo com as especificações alvo. Objetivando a exploração do espaço de projeto foi desenvolvido o modelo de performance teórico e de simulação. Os modelos desenvolvidos auxiliam no também no projeto físico da interface proposta. Objetivando, tanto a validação dos modelos propostos, bem como o desenvolvimento de aplicações, foram construídos dois protótipos. São apresentados os usos da interface como um ADC paramétrico multi-banda e como um multiplicador e um somador de sinais analógicos. É proposta também uma arquitetura para uma interface analógica multi-canal. Os resultados experimentais empregados para a caracterização da interface proposta suportam as vantagens da mesma. / The focus of this thesis is to discuss the development and modeling of an interface architecture to be employed for interfacing analog signals in mixed-signal SOC. We claim that the approach that is going to be presented is able to achieve wide frequency range, and covers a large range of applications with constant performance, allied to digital configuration compatibility. Our primary assumptions are to use a fixed analog block and to promote application configurability in the digital domain, which leads to a mixed-signal interface. The use of a fixed analog block avoids the performance loss common to configurable analog blocks. The usage of configurability on the digital domain makes possible the use of all existing tools for high level design, simulation and synthesis to implement the target application, with very good performance prediction. The proposed approach utilizes the concept of frequency translation (mixing) of the input signal followed by its conversion to the ΣΔ domain, which makes possible the use of a fairly constant analog block, and also, a uniform treatment of input signal from DC to high frequencies. The programmability is performed in the ΣΔ digital domain where performance can be closely achieved according to application specification. The interface performance theoretical and simulation model are developed for design space exploration and for physical design support. Two prototypes are built and characterized to validate the proposed model and to implement some application examples. The usage of this interface as a multi-band parametric ADC and as a two channels analog multiplier and adder are shown. The multi-channel analog interface architecture is also presented. The characterization measurements support the main advantages of the approach proposed.

No description available.

This thesis focuses on the design and implementation of low power Σ∆ ADCs in 130 nanometer CMOS technology. The design issues in the implementation of a third order ADC with a multi-bit and single bit quantizer are discussed. The advancement in CMOS technology has led to designing as much of electronics systems as possible with the digital circuits and digital signal processing replacing analog processing in most cases. Hence there is a need for digitizing analog signals with analog to digital converter (ADC). In communication systems this needs to be done immediately after the antenna in a receiver system. As this is difficult to implement due to high speed and high power consumption, RF signal is converted to a lower intermediate frequency (IF) and digitized. This work stresses low power implementation of high bandwidth Σ∆ ADCs for digitizing the IF. Design techniques involved in the implementation of a third order continuous time Σ∆ ADC with a 4 bit quantizer as well as a single bit quantizer for wide bandwidth are discussed. Moreover, a third order continuous time audio ADC implementation was also done. The behavioural modelling of the Σ∆ ADC along with clock jitter non-linearity model was developed and the issues in circuit design techniques are addressed. The continuous time ADCs’ major problem, namely, excess loop delay is discussed in detail and an efficient compensation technique for the same is implemented which allows a large reduction of power consumed by the ADC. Choice of loop filter architecture, quantizer and transistor level implementation are given that result in better immunity to offsets and process variations. Both the ADCs have been implemented using UMC 130 nm Mixed-mode RF-CMOS process and the simulation results for the multi-bit ADC gives a peak SNR of 56dB with a dynamic range of 65dB with power consumption of 2mW. The audio ADC achieves a peak SNR of 94.2dB with a dynamic range of 91dB.