Denna rapport grundar sig i ett examensarbete inom Teknisk design, högskoleingenjörsexamen (A0014A) för femton högskolepoäng, som utförs i Luleå på Luleå tekniska universitet under vårterminen år 2018. Arbetet utförs med samarbete från företaget Modul, som befinner sig i Kalix och tillverkar över hundra olika produkter i tunnplåt. Målet med projektarbetet är att skapa ett koncept på en bra arbetsmiljö på svetsavdelningen och syftet är att minska fysiska och psykiska belastningar på användarna, samt att förbättra den psykosociala arbetsmiljön samtidigt som det kan skapas ett bättre produktionsflöde och eventuellt öka effektiviteten. I projektet har arbetet utförts i tre varv där projektet har gått igenom olika faser flera gånger för att inte missa information eller problem. För att undersöka kontexten och samla in information om nuläget så gjordes fyra studiebesök, intervjuer med uppdragsgivare och fyra användare, en enkät till uppdragsgivaren och observation på svetsavdelningen. Resultaten av denna kontextundersökning kan summeras till att observationen och intervjuerna med användarna gav information om att användarna har mest problem med ljud (buller), klimat, monotona rörelser och belastningar i rygg, fötter och knän. Sedan var det också brist på ljus i svetsbåset, utrymme, snedbelastningar och stress som skapade problem för användarna. För att kunna skapa koncept gjordes två analyser, där den ena analysen var en riskbedömningsanalys som gav information om vilka aspekter inom arbetsmiljön som var mest besvärligt på de olika arbetsstationerna i svetsavdelningen. Sedan gjordes det en analys av hur stationer, lager och andra platser bör vara nära varandra i en så kallat närhetsanalys för att kunna underlätta skapandet av koncept på layouter. Det skapades även en kravspecifikation för att kunna utvärdera och hjälpa till att utveckla koncept, där de viktade kraven viktades av projektmedlemmen och uppdragsgivaren. Kraven som användes var: fysisk belastning, psykosocial arbetsmiljö, klimat, buller, kostnader, utrymme, närhetsbehov, materialflöde, transporter, säkerhet och potential. Efter konceptframtagningen var det fem olika koncept som gick vidare. Koncept 1 är ett koncept där det endast har flyttats på några arbetsstationer för att främst skapa mer utrymme. Koncept 2 är ett koncept som har ett litet rum för att slipa för att isolera bullret från slipstationen och koncept 3 har också ett rum, men på en annan plats. I koncept 4 är svetsavdelningen flyttad till en annan plats i fabriken och i koncept 5 är svetsavdelningen utbyggd på samma plats som i nuläget. Det slutliga resultatet blev ett kortsiktigt och långsiktigt koncept där båda koncepten har förbättrat arbetsmiljön, exempelvis genom att skapa mer utrymme för arbetsstationerna så att användare inte riskerar att snubbla över närliggande lager runt arbetsstationerna och det långsiktiga konceptet har dessutom förbättrat materialflödet i hela fabriken och inte bara inne i svetsavdelningen. Sedan är de slutliga förbättringsförslagen och rekommendationerna att fortsätta utveckla på de slutliga koncepten, rotera mellan arbetsstationer lite oftare, lägg till en ljuskälla till svetsbåsen, ändra arbetsställningarna genom att använda en anpassad stol vid behov, svetsare ska inte ansvara för att arbeta på flera stationer på samma gång eftersom att det leder till stress och fundera på om produkter behöver slipas eller om det går att minska bullret på slipstationen genom att göra det på ett annat sätt. / This report is based on a bachelor´s degree in Industrial Design Engineering for fifteen credits, conducted in Luleå at Luleå University of Technology during the spring term of 2018. The work is carried out with cooperation from the company Modul, which is located in Kalix and manufactures over 100 different products in thin-sheet metal. The aim of the project is to create a concept for a good work environment in the welding department, with the aim of reducing physical and mental stress on users, but also improving the organizational work environment while creating a better production flow and possibly increasing efficiency. This project has gone in three laps where the project has gone through different phases several times to avoid missing information or problems. In order to examine the context and gather information about the current situation there has been four study visits, interviews with the taskmaster and four users, a survey to the taskmaster and an observation in the welding department. The results of this contextual survey can be summed up by the observation and interviews with users that the users have the most problems with noise, climate, monotonous movements and loadings on the back, feet and the knees. Then there was also a lack of light in the welding box, space, oblique loads and stress that created problems for the users. In order to create concepts, two analyzes were made, where one analysis was a risk assessment analysis that provided information on which aspects of the work environment that were the most difficult at the various workstations in the welding department. Then an analysis was made of how stations, warehouses and other places should be close together in a so-called proximity analysis to facilitate the creation of concepts on layouts. A requirement specification was also created to evaluate and help develop concepts, where the weighted requirements were weighted by the project member and the taskmaster. The requirements used were: physical loadings, psychosocial work environment, climate, noise, costs, space, proximity needs, material flow, transport, safety and potential. Following the conceptualization, there are five different concepts that went on. Concept 1 is a concept where only some workstations have been moved to create more space. Concept 2 is a concept that has a small space to grind where the noise from the grinding station can be isolated and concept 3 also has a room for a grinding station, but in another place. In concept 4, the welding department is moved to another location in the factory and in concept 5 the welding department is expanded in the same location of the factory at present. The final result became a short-term and long-term concept, where both concepts have improved the working environment, for example by creating more space for workstations, so that there is no risk of stumbling over nearby storage places around the workstations, and the long-term concept has also improved material flow throughout the factory and not only inside the welding department. The final improvement proposals and recommendations is to continue to develop on the final concepts, rotate between workstations a little more often, add a light source to the welding arcs and change the work postures by using a custom chair when needed. Welders should not be responsible for working at multiple stations at the same time because it leads to stress and think about if it is needed to grind or if the noise of the grinding station can be reduced by doing it differently.

The main aim of this Diploma thesis called "Identification opportunities for the selected company" is to identify the opportunities on market and to provide possible solutions how to use these opportunities. The Diploma thesis is divided into two main parts. First part is a literature overview that should give the reader the basic knowledge and understanding of the topic. Where the information was gained by studying different sources related to the main aim of the thesis. Second part is the analytical part of the thesis. Different analysis has been chosen to support the work. The marketing situation analysis was used and included the analysis of the macroenvironment (the STEP analysis), the microenvironment, market and sales. This analysis was followed by the analysis of part of the external environment (Porter's model of five competitive forces). The last part of the analytical part is focused on the internal analysis. The human resources, finance, sales and products were analysed. The findings from the analytical chapter were used for the final SWOT analysis.

Theological Education by Extension (TEE) for parishioners is the general area of study. However, focus is placed on the developing of a curriculum, particularly on the problems and challenges around developing of a relevant TEE curriculum. Four different TEE programmes in Botswana were studied. The findings showed that problems were experienced by respondents and others who are involved in TEEs in Botswana. The respondents could identify and describe some of such problems and challenges. Therefore the researcher could arrive at the following conclusion:- Students, staff and all other parties of a TEE must collectively and fully participate in the developing of the curriculum. Moreover, the socio-cultural context influences TEE curriculum; therefore, students need to be trained to respond to such influences in their life situations. Once again, it is important that the curriculum policy and the process of planning take into account of some basic concerns like the theological presuppositions, aims and objectives and basic commitments or foci behind the curriculum. If these concerns are well attended, a more relevant TEE curriculum can be developed. / Philosophy, Practical and Systematic Theology / Th. M. (Practical Theology)

Problems of sustainable tourism, which is solved in this diploma work, was applied to Sedlčany district. The Sedlčany region is situated in the Central Bohemia region. Region abounds in attractive scenic views and offers ample possibilities for recreation and relaxation. The work realized goals and hipothesis, which were set at the beginning. There were performed research, the analysis of district Sedlčansko and suggested proposals of posibilities for the next destinations development and problems solving. It´s successfully determined the present condition of tourism in this destination and made relevant conclusions of it. Thanks to nature and position this area has high potential for tourism development. There are ideal preconditions for sustainable forms of tourism in destination as biking, hiking and rural tourism. The important aims of Sedlčany district are to support development of tourism activities, construction and improve tourism infrastructure, the effective cooperation of all subjects operating in tourism, building ecological information system, the creation of products of tourism, co-operation with nearby tourism regions, making standarts of accommodation and catering, established through certificates.

The main aim of the thesis is to analyze the current development potential in tourism of the Votice town and then propose possible measures and initiatives to improve the utilization of this potential. First it was made an situation analysis of the town and its neighbourhood. It was found the main characteristics of this area (for example geographic, economic or demographic characteristics) including analysis of the services. Then it was conducted some interviews with the important persons. It was proposed several possible projects to improve the current situation. It´s really important, that here the principles of partnership work. Votice as a member of Mikroregion Džbány should cooperate with the other communities and companies. The other problem is a little awareness of local people about the new projects.

The main objective of this thesis is to evaluate the primary and secondary potential tourism development in Chodsko and then on the basis of the analysis suggest the possibility of strategic development of tourism with priorities and measures. Own proposals as strategic objectives are chosen to lead the strategic development of tourism in Chodsko. To meet all these goals were made situation analysis, SWOT analysis and problem analysis of surveyed area.

The diploma thesis deals with an analysis of marketing mix of the wine shop, which name is Vinotéka a radniční sklep Moravský sommelier® in Lednice. The main objective is to make and recommend suggestions to improve actual marketing mix of company. Concrete suggestions are based on outputs of the current situation analysis, outputs of the SWOT analysis and outputs of the questionnaire research.

The main goal of diploma thesis is to analyse the marketing strategy of Black Light Theatre of Jiri Srnec and to suggest its future improvements. The thesis itself contains six chapters, divided into theoretical and practical parts. First three theoretical chapters are devoted to marketing, marketing mix, situation analysis and marketing and commercial communications and strategies. Following chapters create the practical part of the thesis and contain information about Black Ligh Theatre, analysis of its marketing mix, evaluation of recent marketing and communication strategy and interpretation of field research results. Based on these analyses, the last chapter brings suggestions and recommendations for improvements in future marketing strategy.

My Master thesis focuses on the design of the marketing strategy of a low-cost airline SparrowJet. The first chapter of the theoretical parts contains the required basics of theoretical information necessary to develop a marketing plan. In the second chapter is an analysis of the air transportation market with an emphasis on the low-cost segment. The final chapter of the theoretical part is dedicated to the marketing mix in the transportation. The practical part of my thesis begins with the situation analysis, which includes: the PEST analysis, Porters five forces analysis, a competition analysis and a customer analysis. My work is concluded with a complete proposal of a marketing strategy for the airline, including both basic strategy of S-T-P and a marketing mix.

This Master's thesis deals with current financial situation of non-profit-making organization called Nadeje o.s. For classification were applied some methods of financial analysis, whose results were applied to suggestions for financial strategy in following period.