Idag ökar man isoleringen alltmer i takkonstruktion för att spara energi. Ökad mängd isolering minskar temperaturen över takets yttre delar och höjer den relativa fuktigheten där.  Dessutom finns risk att fuktigt material byggs in mellan alltmer täta skikt vilket leder till att det tar längre tid för byggfukten att torka. Detta resulterar i en ogynnsam fuktfördelning med höga relativa fuktigheter över konstruktionen där risken för mikrobiell påväxt ökar. Syftet med denna studie är att utreda hur fuktomlagring sker baserad på inbyggnadsfuktkvoten i välisolerade parallelltak. För att göra riskbedömning av olika takkonstruktioner har fuktsimuleringar gjorts i Wufi 2D där resultat analyserats i Wufi Bio för bedömning av risknivå för mikrobiell påväxt. Resultaten indikerar klart skillnad mellan val av ventilerad och oventilerad takkonstruktion. Det råder även en skillnad mellan val av isoleringsmaterial, takets färdigställandedatum, takets exponeringsriktning och takets utvändiga ytskikt. Slutsatsen är att det råder en större risk för mikrobiell påväxt hos oventilerad takkonstruktion, takkonstruktion som färdigställs under höst (den 1 oktober) jämfört med vår (den 1 april), takkonstruktion som är exponerad mot norr jämfört med söder samt takkonstruktion med utvändigt ytskikt av plåt istället för sedum. / Today there's an increase in the use of insulation in roof constructions in order to save energy. Increased amount of insulation allows temperature drops in the outer layers of the roof resulting in higher relative humidity in the surrounding construction.  There is also a risk that moist materials are built-in between tight layers which contributes to longer drying processes in order for the moisture to successfully dry out. This also contributes to an unfavorable divide in moisture with high relative humidity settling on top of the construction where risk of microbial growth is the greatest. The aim of this study is to investigate how moisture behaves based on the mounting quota of moist in well insulated parallel roof constructions. To make a risk assessment of different roof constructions, different simulations have been created in Wufi 2D where results are further analyzed in Wufi Bio for final assessment on whether there is an apparent microbial advantage. The result help shimmer light on the differences between ventilated and unventilated roof constructions. There is also an evident importance in choice of insulation materials, the finish-date for the roof, exposure vulnerability and the outer coating of the roof. The conclusion is that there is a greater risk of microbial damages in unventilated roof constructions when comparing the roof construction that is finished first of October in comparison to first of April, the roof construction that is exposed to north rather than south and to the roof construction with outer surface layer of tin rather than sedum.

To save energy it’s popular to build houses with low energy loss. In these houses the walls are keeping a lower temperature in the external side which leads to a higher relative humidity. In addition more material, such as wood studs, are used which means that there is more moisture to dry. More moisture in combination with higher relative humidity may pose a higher risk of microbial growth. The purpose of this study was to investigate what is a reasonable moisture content in wood studs in four different well-insulated exterior walls. It has also been investigated how moisture rearrangements effect the exterior walls. The software Wufi2D, which does moisture-simulations, was used to collect data. The results have been analyzed in Wufi Bio which showed that the moisture content should be somewhere between 12.5 to 18.5%, depending on how the wall is built. The conclusions are that windbreaks vapor resistivity is essential for what is a reasonable built in moisture content in the wood studs. Depending on the materials that are used, it´s important to consider how much moisture the wall construction contains.

The aim of the master´s thesis is to design a Residential care home as smart building. It is situated in the centre of Křenovice near Brno. The master´s thesis is divided into three parts, first part presents design documentation, second part is focused on building services and the final part presents noise control in building. Residential care house is designed as two-storey building without basement with flat roof. On the first floor there is utility area for senior house and healthcare facility and on the second floor there are flats for seniors. Residential care house is built on footing. Load-bearing and non-load-bearing walls are designed from hollow bricks type THERM. External walls are insulated with mineral wool. The roofing of residential care house is made up of extensive green roof. The building services of the building includes two ground-water heat pumps with boreholes for heating and cooling, photovoltaic panels, HVAC, hot water cylinder and rainwater storage tank. The final part is focused on noise control in building. It is about acoustic in construction. Noise study is also included.

The aim of my master's project is to design a new building of a Special education centre with nearly zero energy consumption. The project consists of three main parts. The building is designed with a green flat roof with a load-bearing part formed by prestressed ceiling panels. The load-bearing wall masonry consists of ceramic blocks with stone wool insulation panels with longitudinal fibres. The building is divided into two main parts connected by a connecting entrance hall. First department is used mainly for therapy rooms and the other department for the offices of special pedagogical staff. The building also contains photovoltaic panels, air-handling units with heat recovery and a rainwater storage reservoir with the possibility of using rainwater for flushing. The next part of the master's project deals with the assessment of the life cycle of the structure (LCA), where the subject of assessment are various types of floor structures.

No description available.

Funktionskläder utgör idag en stor marknad över hela världen med stigande efterfrågan där syntetiska material står för en betydande andel av de producerade textilierna. Ett plaggs totala miljöpåverkan kan till stor del härledas till materialvalet. Materialkompositionen i underställ består ofta av blandningar av textila fibrer, vilket komplicerar återvinningsprocessen och gör den nästintill omöjlig. För att kunna 'sluta cirkeln' måste innovativa textila lösningar tas fram för att styra textilindustrin i rätt riktning. Studien undersöker alternativa fibrer och jämför dem med de konventionella för textilier till underställ där man vill uppnå god fukttransport och värmeisolering. Vidare kartläggs materialens användningsområden för att skapa ett mångsidigt funktionsplagg och därmed möjliggöra en klimatsmartare garderob. Studien identifierar och jämför de termofysiologiska egenskaperna hos materialen bambuviskos, merinoull, Tencel, PCM och Coolmax. Textilprover stickades i hundraprocentiga materialkompositioner med en utvald trikåbindning i en rundsticksmaskin. Textilprovets termofysiologiska egenskaper utvärderades med hjälp av testutrustningarna Hudmodellen och WickView för att bestämma värmemotstånd och fukttransport. Därefter analyserades resultaten på materialens termofysiologiska komfort för att sedan kartlägga deras användningsområde baserat på aktivitetsnivå och omgivningsfaktorer. Resultaten från studien indikerar att merinoull och Coolmax kan rekommenderas för användning i underställ där både värmeisolering och fukttransport är viktiga, där merinoull är mest lämplig för kalla klimat. Vidare kan bambuviskos och Tencel vara lämpliga alternativ för användning i underställ vid aktiviteter av måttlig intensitet i varierande klimatförhållanden. PCM, med sitt låga värmemotstånd och medelhöga fukttransport, gör materialet mindre lämpligt för underställ. Testresultaten från studien ger insikt i materialens termofysiologiska komfort, men bör inte ses som en heltäckande bild av denna komfort. För att erhålla en mer valid slutsats krävs ytterligare tester och beaktande av fler faktorer. / Functional clothing represents a significant global market with rising demand today, where synthetic materials account for a considerable proportion of the textiles produced. A garment's total environmental impact can largely be traced back to the choice of material. The material composition of base layers often consists of mixtures of textile fibers, which complicates the recycling process and makes it almost impossible. To 'close the loop', innovative textile solutions must be developed to steer the textile industry in the right direction. The study investigates alternative fibers and compares them with conventional ones for textiles in base layers where effective moisture transport and heat insulation are sought. Furthermore, the areas of use for these materials are mapped out to create a versatile functional garment, thereby enabling a more climate-smart wardrobe. The study identifies and compares the thermophysiological properties of the materials bamboo viscose, merino wool, Tencel, PCM, and Coolmax. Textile samples were knitted in 100% material compositions using a selected tricot stitch on a circular knitting machine. The thermophysiological properties of the textile samples were evaluated using the Skin Model and WickView testing equipment to determine heat resistance and moisture transport. Afterwards, the results on the materials' thermophysiological comfort were analyzed, and their areas of use were mapped out based on activity level and environmental factors. The results from the study indicate that merino wool and Coolmax can be recommended for use in base layers where both heat insulation and moisture transport are important, with merino wool being most suitable for cold climates. Furthermore, bamboo viscose and Tencel could be suitable alternatives for use in base layers for activities of moderate intensity in varying climate conditions. PCM, with its low heat resistance and medium-high moisture transport, makes the material less suitable for base layers. The test results from the study provide insight into the materials' thermophysiological comfort but should not be seen as a comprehensive picture of this comfort. To obtain a more valid conclusion, additional tests and consideration of more factors are required.

The thesis solves the project of a kindergarten in the field of inclination 7%. The kindergarten is located on the plots number 570, st. 373, st. 374 in the village Vrané nad Vltavou. The building has two floors and one basement. The kindergarten is for 60 children and for 11 employees. The building serves as a preschool institution for raising children. The supporting structure consists of a precast concrete frame supplemented in the basement by a cast-in-place wall and a foundation slap. External walls and partitions form sand-lime bricks Sendwich. The external walls are completed with Orsilt TF Profi mineral insulation th. 280 mm. The floors are made of prestressed concrete floor slabs Spiroll PPD 256 th. 250 mm supported by T and L primary beams. The building ends with a could extensive green roof. The slope and space for the blow-in insulation Climatizer Plus uses Steico Joist 400 I-beams. Windows are wooden frame Optiwin Purista and doors are Optiwin Entrada.

In the thesis researches of overall performance of the polymerization furnace of Uralasbest plant are executed. The existing thermal scheme and a design of the furnace is considered, thermal calculation is carried out and technical solutions on improvement of thermal and ecological characteristics of the furnace operation are proposed. Researches showed that ecological characteristics mineral-wool production doesn't satisfy to requirements to environmental standards, and for decrease in emissions of nitrogen oxides more effective burner system is proposed. On the basis of the executed measurements and balance calculations technical actions on decrease in thermal losses with the leaving gases are offered. / В диссертации выполнены исследования эффективности работы печи полимеризации цеха ОАО «Ураласбест». Рассмотрена существующая тепловая схема и конструкция печи, проведен тепловой расчет и предложены технические решения по совершенствованию тепловых и экологических характеристик работы печи. Исследования показали, что с точки зрения экологических характеристик минераловатное производство не соответствует требованиям к экологическим нормам, и для снижения выбросов оксидов азота предложена более эффективная горелочных система..На основе выполненных измерений и балансовых расчетов предложены технические мероприятия по снижения тепловых потерь с уходящими газами.

The number of biogas plants in Germany is increasing from 3,711 in 2007 to 8,075 in 2016. In these biogas plants, it occurred more than 50 Mt digestate. Therefore, several investigations are started to use digestate as organic fertiliser mostly for field crop cultivation. Experiment with tomatoes was carried out were digestate was used as a supplement to the growing media in an amount of 5%, 15%, and 25%, compared with a treatment of mineral fertiliser and lupine wholemeal. The tomato yield was highest in the treatment with mineral fertilisation, the yield with 25% digestate was only a little lower. More experiments are necessary for particular regarding the amount and frequency of fertilization with digestate from biogas plants. In Germany and in Vietnam the number of sheep flocks is increasing, high amounts of uncleaned sheep wool are available. Because of the high amount of nutrients - especially nitrogen -, sheep wool pellets could be used as multi-functional fertiliser in vegetable cultivations. Four types of sheep wool pellets have been tested in protected cultivation. Tomatoes were cultivated in a greenhouse using substrate culture with perlite, bark compost, sheep wool slabs, respectively, and sheep wool pellets as fertiliser. Best growth and highest yield for tomatoes were obtained using pine bark and perlite as a substrate, both fertilised with sheep wool pellets. Based on the results of the yield and the analyses of the nutrient content in plants it seems that sheep wool pellets can be used, for the cultivation of vegetables in greenhouses. / Số lượng các nhà máy biogas tại CHLB Đức tăng từ 3.711 năm 2017 lên 8.075 năm 2016. Các nhà máy biogas sản sinh ra hơn 50 triệu tấn chất thải. Vì vậy đã có nhiều nghiên cứu liên quan đến sử dụng nguồn chất thải này làm phân bón hữu cơ cho canh tác nông nghiệp. Thí nghiệm với cà chua sử dụng chất thải biogas làm chất bổ sung dinh dưỡng cho giá thể trồng cây theo các tỷ lệ 5%, 15% và 25% đối chứng với công thức sử dụng phân hóa học và bột nguyên vỏ họ đậu. Năng suất cà chua thu được từ các công thức bổ sung chất thải biogas đều cao hơn đối chứng, chỉ có công thức bổ sung 25% có năng suất thấp hơn. Tuy nhiên vẫn cần có những nghiên cứu tiêp theo về lượng và tần xuất sử dụng bón phân với chất thải từ nhà máy biogas. Ở Đức và ở Việt Nam số lượng đàn cừu đang tăng lên, một lượng lớn lông cừu phế phẩm phát sinh. Với hàm lượng dinh dưỡng cao, đặc biệt là nitơ, viên nén từ lông cừu phế phẩm có thể sử dụng làm phân bón đa chức năng cho trồng trọt. Nghiên cứu đã sử dụng 4 loại viên nén lông cừu làm phân bón trong điều kiện trồng có kiểm soát. Cà chua được trồng trong nhà kính với 3 loại giá thể là perlite, vỏ cây thông đã ủ hoai, thảm lông cừu với phân bón là viên nén từ lông cừu phế phẩm. Năng suất cao nhất và đem lại sinh trưởng tốt nhất cho cây cà chua là công thức sử dụng vỏ cây thông và perlite. Dựa trên kết quả về năng suất và phân tích dinh dưỡng trong cây và sản phẩm, nghiên cứu cho thấy sự phù hợp của viên nén từ lông cừu phế phẩm làm phân bón cho canh tác rau trong nhà kính.

No description available.