Diploma thesis "Child sexual abuse in Czech republic" deals with the development and especially with the stage in our republic about this issue. The thesis in the first two parts examine the issue of child sexual abuse from number of points of view, which are the actors how enter to the issue, what does the child sexual abuse mean and which are its forms, analyse the problems during the solution of this issue in Czech republic. In the second part the diploma thesis goes in for the possibilities of solution of the issue in Czech republic. With the help of the evaluation of some options, where as examples are some foreign models, in this thesis there are proposed some proceedings which would be advisable to introduce in Czech republic for the effective solution of the issue.

Denna deduktiva fallstudie har genomförts på företaget e-Component Sweden AB som tillverkar stål- och plåtdetaljer efter kundspecifikation. Företaget producerar huvudsakligen detaljer till den marknadsledande tiltrotatorn (grävmaskinens handled) från engcon. Studien avsåg att undersöka processen för hantering av avvikelser och kassationer. Det övergripande syftet var att, genom den relativt nya förbättringsmodellen DASIAS, studera en förbättringsmöjlighet med avseende på kvalitet genom att finna gap mellan nuläget och ett önskat nyläge. Därefter har lämpliga förbättringar samt en plan för implementering av förbättringarna föreslagits.  Studien har tillämpat de metoder, verktyg och analyser som DASIAS föreskriver. Datainhämtning har skett genom observationer, intervjuer och dokumentinsamling. Resultatet visar att en förbättringsmöjlighet finns och har identifierat resurserna; metod, mätningar, material, maskin, mission och management som orsaker till förbättringsmöjligheten. Vidare  visar studien att det genom en optimerad process för hanteringen av avvikelser och kassationer efter justerade rutiner och arbetssätt som skapar förutsättningar för att börja process- och kvalitetsleda, finns möjlighet att förebygga och genom ständiga förbättringar minimera avvikelser och kassationer i produktionen. Tidigare studier, den teoretiska referensramen och denna studies resultat tyder på att de konkreta förslag på tvärvetenskapliga åtgärder som utarbetats skulle ge positiva effekter på företagets kvalitet. Analysen visar att det önskade nyläget skulle föra företaget närmare uppställda kund- och intressentkrav. / This deductive case study has been carried out at the company e-Component Sweden AB, which manufactures steel- and sheet metal details, to customer specifications. The company mainly produces details for the market-leading tiltrotator (the excavators wrist) from engcon. The purpose of the study was to examine the process for handling defects and deviations from the main production. The overall aim was to, through the relatively new possibility- and improvement model DASIAS, study an opportunity for improvement with regard to quality by identifying a gap between the current procedure and a desired new procedure. Thereafter, appropriate improvements including a plan for implementing the improvements has been proposed.  The study has applied the tools and analyzing methods as prescribed by DASIAS. Data has been collected through observations, interviews and document collection. The study's result suggests that there is an opportunity for improvement and have identified the resources method, measurements, materials, machine, mission and management as reasons for the improvement opportunity. Further, the study suggests that through an optimized process for handling defects and deviations – following adjusted routines and working methods and creating conditions for implementing process and quality management, there is an opportunity to prevent and through continuous improvements minimize defects and deviations in the main production. Previous studies, the theoretical frame of reference and the results of this study suggest that the concrete interdisciplinary measures proposed would have a positive impact on the company’s overall quality. The analysis shows that the desired new situation would bring the company closer to customer- and stakeholder requirements.

The master's thesis deals with application of Management Control System methods, described in theoretical part of the thesis. In analytical part, those methods are used for comparison of planned performance of individual trucks in the transport company with real performance of those trucks in year 2017. Detected deviations from the plan are further analysed, in order to identify their sources and to formulate corrective measures to eliminate them. This knowledge is put to use in the proposal part, in order to create plan for year 2018, which takes into account established facts and corrective measures from previous year. Finally, part of the plan for year 2018 is compared with real data collected by the company in that period, in order to assess the plan’s accuracy, identify deviations from the plan and their sources.

This diploma thesis deals with verification of quality of the valid cadastral map in cadastral unit Heroltice u Tišnova. In pursuance of the thesis were surveyed primarily perceptible boundaries of the estates and perimeters of the buildings, and ascertained situation of the surveyed borders and the perimeters of the buildings was compared with situation of these depicted in the cadastral map pursuant to paragraph 13 and 15 of Annexe of the regulation no. 357/2013. Detected discrepancies are commented in the thesis and for specific cases are suggested specific solutions in order to achieve a proper condition of the situations. Outcome of the thesis may be used by relevant authority as a material for decision about implementation of the renewal of cadastral documentation using new mapping, or as a tool for owners of the estates for finding out what kind of discrepancies were detected on their estates and how they can rectify them.

Geothermal energy is one of the oldest forms of energy on our planet. Its use by humanity dates back to the beginning of the ages. The forms of this energy gradually changed from the direct heat of the hot springs, through the heating of the buildings and the baths to the later use of superheated steam for industrial use. Nowadays, there is a large share of the use of large number of ground geothermal boreholes with heat exchangers drilled in the matrix. The geometric arrangement of such system has a considerable impact on its operation. Specific examples show that, unlike the design, actual boreholes in such system can often be drilled non vertically or even curved. These imperfections then usually deteriorate the thermal properties of the system. This thesis demonstrates the influence analysis of the borehole geometry distortion on the system thermal properties, it also informs about the development of a special measuring device designed to obtain information about the actual geometric shape of the investigated borehole and about the development of software for in situ rapid borehole system properties evaluation. The theoretical part of thesis contains the derivation of a simplified numerical model of heat conduction in the vicinity of the borehole system. Its results serve to compare the different borehole variants and the inaccuracy of borehole shaping. Using the simulations, the influence of inaccuracies in the borehole system on its thermal properties is demonstrated in several model configurations. This effect does not occur in a single borehole, but it is significantly visible in organized geothermal borehole systems. It may deteriorate system properties, but under certain circumstances its properties may improve. Verification of the results of these simulations was performed by the FEFLOW simulation software. In the practical part the development of a special instrument for measuring the shape of a geothermal energy borehole is documented. ....

The master´s thesis is focused on application of Management Control System in a company especially on operative planning and devations analysis. The first part of the master´s thesis is theoretical with basic terms and used continualy in the analytical part. In analytical part the company ABC s.r.o. will be described and analyzed its currently used planning method for 2018. Then will be used deviation analysis. In the proposal part i will try to propose corrective actions, to improve the current situation in the form of a plan using the cover margin contribution.

The basic problem of speech is a complete separation of the natural noise which arise from correct articulation of voiced and unvoiced consonants from noise and disturbance environment. Objective of this master’s thesis is to find an effective method that could identify the pauses without speech activity, which can identify the properties of noise and disturbance. Once the noise is correctly identified, it is already possible to use different methods for its removal. The master’s thesis describes two methods of pauses identification. These methods are programmed in Matlab and tested on nine speech recordings. Methods analysis of the results was performed using the ROC (Receiver Operating Characteristic) curves. In the end are summarized results analysis of created methods.

This thesis deals with use of astronomical-geodetic and gravimetric leveling to calculate quasigeoid profile. The main input data in the calculation are gravimetric vertical deviations on point of profile. The aim of this thesis is the processing and calculating of the profile of relativ quasigeoid with three different methods and then comparing the calculation results with gravimetric quasigeoid and GPS/leveling.

This diploma thesis deals with application of robotic total station for crane tracks measuring. To determinate straight of rail tracks was used system of automatic target recognition. One crane track was measured by two methods. Horizontal deviation from straight direction was determinated directly by the method “line of sight” and indirectly using measuring angles and lengths. To determinate height continuance was used engineering and trigonometric leveling. The results of measuring proved, that reached deviations between methods are minimal, so we consider them as equal. System system of automatic target recognition reliably and with sufficient accuracy aims to the prism-centre.

The work deals with the determination of optimal curing temperature by powder coating. The thesis includes a literary study of powder coating. In the experimental part of the thesis will be performed pre-treatment and coated several test samples. It will be carried out verification of the properties of powdered coating