In this work, a fully differential Operational Amplifier (OpAmp) with high Gain-Bandwidth (GBW), high linearity and Signal-to-Noise ratio (SNR) has been designed in 65nm CMOS technology with 1.1v supply voltage. The performance of the OpAmp is evaluated using Cadence and Matlab simulations and it satisfies the stringent requirements on the amplifier to be used in a 12-bit pipelined ADC. The open-loop DC-gain of the OpAmp is 72.35 dB with unity-frequency of 4.077 GHz. Phase-Margin (PM) of the amplifier is equal to 76 degree. Applying maximum input swing to the amplifier, it settles within 0.5 LSB error of its final value in less than 4.5 ns. SNR value of the OpAmp is calculated for different input frequencies and amplitudes and it stays above 100 dB for frequencies up to 320MHz. The main focus in this work is the OpAmp design to meet the requirements needed for the 12-bit pipelined ADC. The OpAmp provides enough closed-loop bandwidth to accommodate a high speed ADC (around 300MSPS) with very low gain error to match the accuracy of the 12-bit resolution ADC. The amplifier is placed in a pipelined ADC with 2.5 bit-per-stage (bps) architecture to check for its functionality. Considering only the errors introduced to the ADC by the OpAmp, the Effective Number of Bits (ENOB) stays higher than 11 bit and the SNR is verified to be higher than 72 dB for sampling frequencies up to 320 MHz.

Because IC (Integrated Circuit) has some good features like: little, low power consumption, and high stable, so it already popularly applied to our daily life. Operation is one of the main functions of IC, and now operate function achieve in digital mode of many IC products. Although digital circuits have many advantages, but we live in the analog world, natural signals are all analog. Digital circuits can¡¦t direct process analog signals, and therefore we have a requirement of analog-to-digital converter. As time goes by, IC technology has made great progress; digital circuits have faster process ability, and we also require a high speed analog-to-digital converter. Besides, in order to achieve higher picture quality and clearer voice, we also require a high resolution analog-to-digital converter. For portable products, the power consumption also needs to take into account. As mentioned above, I will implement a high speed, high resolution and low power analog-to-digital converter. In this thesis, the circuits are designing with TSMC.18£gm 1P6M CMOS process and 1.8V of supply voltage. The speed and resolution of ADC are 100Ms/s and 12bits individually. The pipelined coupling with 1.5bit/stage constitutes the main architecture of analog-to-digital converter. The dynamic comparator is used for lower power. Finally, the output codes are translated by digital correction circuit. Keywords: ADC, Analog-to-Digital Converter, pipeline, low power, amplifier, comparator.

This thesis consists of two topics: A 2.45 GHz ZigBee Receiver Frontend design for home energy-saving systems and a Delta-Sigma ADC with constant-gm amplifier for Battery Management Systems (BMS). A 2.45 GHz ZigBee Receiver Frontend for home energy-saving systems is pre-sented in the first part of this thesis. The proposed ZigBee receiver can be used in areas where wireline solutions are hard to be realized. By employing an LNA at the very frontend of the receiver, the gain is simulated to be 17.376 dB at 2.45 GHz. Besides, by using the double-balanced Gilbert mixer with a current bleeding MOS transistor, the NF and the IIP3 of the mixer are only 5.074 dB and -7.234 dB, respectively. To reduce the phase noise of the receiver, a fractional-N frequency synthesizer with a complementary cross-coupled VCO is adopted. The phase noise of the fractional-N frequency synthe-sizer is 137.7 dBc/Hz. The proposed circuit is carried out and measured on silicon using the standard TSMC 0.18 £gm CMOS process. In the second topic, a Delta-Sigma ADC with constant-gm amplifier is presented. The proposed ADC is particularly designed for the voltage detection circuit in BMS. A constant-gm amplifier is also presented to resolve the nonlinearity of the amplifier de-grading the performance of Delta-Sigma modulator, which is the frontend of the Del-ta-Sigma ADC. With the 4 KHz signal bandwidth, 512 KHz sampling frequency, and 128 oversampling rate, it shows a 85.2 dB SNR, and 12-bit resolution. The backend of the ADC is the decimator, which reduces the sampling frequency compliant with the Nyquist rate rule. The decimator is realized by Verilog code and verified by FPGA. By following the mixed-signal flow, the ADC is realized on a single chip using the standard TSMC 0.25 £gm 60V HV CMOS process.

The profound digitization of modern microelectronic modules made Analog-to- Digital converters (ADC) key components in many systems. With resolutions up to 14bits and sampling rates in the 100s of MHz, the pipeline ADC is a prime candidate for a wide range of applications such as instrumentation, communications and consumer electronics. However, while past work focused on enhancing the performance of the pipeline ADC from an architectural standpoint, little has been done to individually address its fundamental building blocks. This work aims to achieve the latter by proposing design techniques to improve the performance of these blocks with minimal power consumption in low voltage environments, such that collectively high performance is achieved in the pipeline ADC. Towards this goal, a Recycling Folded Cascode (RFC) amplifier is proposed as an enhancement to the general performance of the conventional folded cascode. Tested in Taiwan Semiconductor Manufacturing Company (TSMC) 0.18?m Complementary Metal Oxide Semiconductor (CMOS) technology, the RFC provides twice the bandwidth, 8-10dB additional gain, more than twice the slew rate and improved noise performance over the conventional folded cascode-all at no additional power or silicon area. The direct auto-zeroing offset cancellation scheme is optimized for low voltage environments using a dual level common mode feedback (CMFB) circuit, and amplifier differential offsets up to 50mV are effectively cancelled. Together with the RFC, the dual level CMFB was used to implement a sample and hold amplifier driving a singleended load of 1.4pF and using only 2.6mA; at 200MS/s better than 9bit linearity is achieved. Finally a power conscious technique is proposed to reduce the kickback noise of dynamic comparators without resorting to the use of pre-amplifiers. When all techniques are collectively used to implement a 1Vpp 10bit 160MS/s pipeline ADC in Semiconductor Manufacturing International Corporation (SMIC) 0.18[mu]m CMOS, 9.2 effective number of bits (ENOB) is achieved with a near Nyquist-rate full scale signal. The ADC uses an area of 1.1mm2 and consumes 42mW in its analog core. Compared to recent state-of-the-art implementations in the 100-200MS/s range, the presented pipeline ADC uses the least power per conversion rated at 0.45pJ/conversion-step.

The first topic of this thesis proposes a digital negative phase shifter circuit which generates a clock with adjustable negative delays (phase shift) in order to avoid multi-locking hazards. Arbitrary negative phase can be generated by using multiplexers and voltage variable delay cells to select the required phase shift. The proposed design is implemented by 0.35 um CMOS 1P4M technology. A single-shot locking method is adopted to reduce the locking time. Most important of all, the negative phase shifter is predictable and adjustable. The simulation results show that the accuracy of the proposed design is better than 6%. The second topic is to describe a 10-bit, 80 MS/s analog-to-digital converter (ADC) for digital video broadcasting over terrestrial (DVB-T) receivers. The ADC is based on a four-channel parallel pipeline architecture which employs dynamic comparators and switch-capacitance sample-and-hold circuit to achieve high speed operation and low power consumption. Simulation results using a TSMC 0.35um 2P4M process show that the proposed ADC achieves 56dB spurious-free dynamic range (SFDR) and 9.01-bit ENOB.

A low-energy current-mode algorithmic pipelined ADC targeted for use in distributed sensor networks is presented. The individual nodes combine sensing, computation and communications into an extremely small volume. The nodes operate with very low duty cycle due to limited energy. Ideally these sensor networks will be massive in size and dense in order to promote redundancy. In addition the networks will be collectively intelligent and adaptive. To achieve these goals, distributed sensor networks will require very small,inexpensive nodes that run for long periods of time on very little energy. One component of such network nodes is an A/D converter. An ADC acts as a crucial interface between the sensed environment and the sensor network as a whole. The work presented here focuses on moderate resolution, and moderate speed, but ultra-low-power ADCs. The 6 bit current-mode algorithmic pipelined ADC reported here consumes 8 pJ/bit samples at 0.65V supply and 130 kS/s. The current was chosen as the information carrying quantity instead of voltage as it is more favorable for low-voltage and low-power applications. The reference current chosen was 150nA. All the blocks are using transistors operating in subthreshold or weak inversion region of operation, to work in low-voltage and low current supply. The DNL and INL plots are given in simulation results section. The area of the overall ADC was 0.046 mm2 only.

This thesis focuses on the analysis theory, circuit design, simulations, and chip measurements of the transfer stage in the continuously error-trimming comparator-based switched-capacitor charge transfer stage in the cyclic redundant-sign-digit (RSD) algorithm. Capacitor mismatching remains an insurmountable factor for switched-capacitor circuit designers. To correct errors which result from the capacitor mismatching, a continuous error-trimming circuit is generalized from a typical CBSC circuit. The analysis theory of the error-trimming operation describes the effects of the error-trimming circuit in the CBSC circuit, as well as the guidelines for trimming. The error-trimming operation is able to tune the gain and virtual condition of the charge transfer stage for canceling the gain and offset errors. The circuit is designed, with the 0.35£gm 2-poly 4-metal TSMC process, in fully integral circuits. The circuit is simulated by a matlab simulator and an online Cadence Spectre simulator, to confirm how the operation works. Finally, chip measurements are recorded for verification and simulation comparisons.

There are many kinds of commercial memory cards on the market. Due to great improvements in modern technology, they have great amounts of capacity, low power consumption, and are easily available. Therefore a data logging system using a commercial memory card is a convenient and economic procedure. This thesis introduces a wearable data logging system for physiological recording. A front-end amplifier, analog to digital converter, and a memory card controller compose the basis of this system. The front-end amplifier uses a switched-capacitor structure, so the output waveform is discrete in regard to the time domain. This brings an advantage in saving power for not keeping charging the load capacitance. Lateral bipolar transistors fabricated in a CMOS process are used as input devices. A conventional ADC is used to convert the amplified signal into digital data. Finally MultiMediaCard is chosen as a large storage space. This thesis contributes the analysis, design and measurement of the amplifier front-end. In addition, the design and implementation of a controller circuit for sequential data storage into the MultiMediaCard memory is described. Special attention was paid to achieving a small area, low-complexity and low-power implementation suitable for integration. Measured results obtained from a preliminary FPGA implementation are reported and the functionality of a complete logger circuit is demonstrated with measured results.

<p>An important component in many communication system is the digital to analog converter. The component is needed in order to convert real world analog quantities to digital quantities which are easier to process. As the market for hand held devices with wireless communication with the outer world has increased new approaches for sharing the frequency spectrum are needed. Therefore it would be interesting to look at the possibility to design an analog to digital converter that, in runtime, can change the frequency band converted, and hence the used standard. This thesis study one of the possibilities to design such an ADC, as a Σ∆ modulator, and more precise the structure called Cascade of resonators with distributed feedback and input (CRFB). The order of the modulator in this study is two.</p>

This dissertation presents a novel [delta sigma] analog-to-digital converter architecture which replaces the operational amplifier-based integrator with a pair of tunable oscillators. A switched-capacitor V-I converter is used to combine the input voltage with a feedback DAC output and convert it into a current for two pseudo-differential current-controlled oscillators. The oscillator outputs are counted with a digital counter, and a digital back-end [delta sigma] modulator is used to truncate the high-resolution counter outputs for the feedback DAC path. This architecture has compelling advantages in deep sub-micron and emerging technologies where supply voltages are decreasing to a point that traditional analog architectures are no longer feasible. Additionally, this architecture takes advantage of the increased speed in these short-channel technologies. Measured results on a 6.08mW prototype in TSMC 0.18um achieving 63.5dB in a 2MHz bandwidth are presented. / text