<p dir="ltr">In the realm of autonomous vehicle technology, the Multimodal Vehicle Detection Network (MVDNet) represents a significant leap forward, particularly in the challenging context of weather conditions. This paper focuses on the enhancement of MVDNet through the integration of a multi-head attention layer, aimed at refining its performance. The integrated multi-head attention layer in the MVDNet model is a pivotal modification, advancing the network's ability to process and fuse multimodal sensor information more efficiently. The paper validates the improved performance of MVDNet with multi-head attention through comprehensive testing, which includes a training dataset derived from the Oxford Radar Robotcar. The results clearly demonstrate that the Multi-Head MVDNet outperforms the other related conventional models, particularly in the Average Precision (AP) estimation, under challenging environmental conditions. The proposed Multi-Head MVDNet not only contributes significantly to the field of autonomous vehicle detection but also underscores the potential of sophisticated sensor fusion techniques in overcoming environmental limitations.</p>

<p>Multifunctional additive manufacturing has the immense potential of addressing present needs within structural health monitoring by enabling a new additive manufacturing paradigm that redefines what a sensor is, or what sensors should resemble. To achieve this, the properties of printed components must be precisely tailored to meet structure specific and application specific requirements. However due to the limited number of commercially available multifunctional filaments, this research investigates the in-house creation of adaptable piezoresistive multifunctional filaments and their potential within structural health monitoring applications based upon their characterized piezoresistive responses. To do so, a rigid polylactic acid based-filament and a flexible thermoplastic polyurethane based-filament were modified to impart piezoresistive properties using carbon nanofibers. The filaments were produced using different mixing techniques, nanoparticle concentrations, and optimally selected manufacturing parameters from a design of experiments approach. The resulting filaments exhibited consistent resistivity values which were found to be less variable under specific mixing techniques than commercially available multifunctional filaments. This improved consistency was found to be a key factor which held back currently available piezoresistive filaments from fulfilling needs within structural health monitoring. To demonstrate the ability to meet these needs, the piezoresistive responses of three dog-bone shaped sensor sizes were measured under monotonic and cyclic loading conditions for the optimally manufactured filaments. The characterized piezoresistive responses demonstrated high strain sensitivities under both tensile and compressive loads. These piezoresistive sensors demonstrated the greatest sensitivity in tension, where all three sensor sizes exhibited gauge factors over 30. Cyclic loading supported these results and further demonstrated the accuracy and reliability of the printed sensors within SHM applications.</p>

<p>The last few decades have witnessed unprecedented growth in multiple areas of electronics spanning low-power sensing, intelligent computing and high-speed wireless connectivity. In the foreseeable future, there would be hundreds of billions of computing devices, sensors, things and people, wherein the technology will become intertwined with our lives through continuous interaction and collaboration between humans and machines. Such human-centric ideas give rise to the concept of internet of bodies (IoB), which calls for novel and energy-efficient techniques for sensing, processing and secure communication for resource-constrained IoB nodes.As we have painfully learnt during the pandemic, point-of-care diagnostics along with continuous sensing and long-term connectivity has become one of the major requirements in the healthcare industry, further emphasizing the need for energy-efficiency and security in the resource-constrained devices around us.</p> <p>  </p> <p>  With this vision in mind, I’ll divide this dissertation into the following chapters. The first part (Chapter 2) will cover time-domain sensing techniques which allow inherent energy-resolution scalability, and will show the fundamental limits of achievable resolution. Implementations will include 1) a radiation sensing system for occupational dosimetry in healthcare and mining applications, which can achieve 12-18 bit resolution with 0.01-1 µJ energy dissipation, and 2) an ADC-less neural signal acquisition system with direct Analog to Time Conversion at 13pJ/Sample. The second part (Chapters 3 and 4) of this dissertation will involve the fundamentals of developing secure energy-efficient electro-quasistatic (EQS) communication techniques for IoB wearables as well as implants, and will demonstrate  2 examples: 1) Adiabatic Switching for breaking the αCV^2f limit of power consumption in capacitive voltage mode human-body communication (HBC), and 2) Bi-Phasic Quasistatic Brain Communication (BP-QBC) for fully wireless data transfer from a sub-6mm^3, 2 µW brain implant. A custom modulation scheme, along with adiabatic communication enables wireline-like energy efficiencies (<5pJ/b) in HBC-based wireless systems, while the BP-QBC node, being fully electrical in nature, demonstrates sub-50pJ/b efficiencies by eliminating DC power consumption, and by avoiding the transduction losses observed in competing technologies, involving optical, ultrasound and magneto-electric modalities. Next in Chapter 5, we will show an implementation of a reconfigurable system that would include 1) a human-body communication transceiver and 2) a traditional wireless (MedRadio) transceiver on the same integrated circuit (IC), and would demonstrate methods to switch between the two modes by detecting the placement of the transmitter and receiver devices (on-body/away from the body). Finally, in Chapter 6, we shall show a technique of augmenting security in resource-constrained devices through authentication using the Analog/RF properties of the transmitter, which are usually discarded as non-idealities in a digital transceiver chain. This method does not require any additional hardware in the transmitter, making it an extremely promising technique to augment security in highly resource-constrained scenarios. Such energy-efficient intelligent sensing and secure communication techniques, when combined with intelligent in-sensor-analytics at the resource-constrained nodes, can potentially pave the way for perpetual, and even batteryless systems for next-generation IoT, IoB and healthcare applications.</p>

<p dir="ltr">Ultra-scaled, always-on, smart, wearable and implantable (WI) therapeutic platforms define the research frontier of modern personalized medicine. The WI platform integrates real-time sensing with on-demand therapy and is ideally suited for real-time management of chronic diseases like diabetes. Traditional blood tracking methods, such as glucometers, are insufficient due to their once-in-a-while measurements and the imprecision of insulin injections, which can lead to severe complications. To address these challenges, researchers have been developing smart and minimally invasive microneedle (MN) components for pain-free glucose detection and drug delivery, potentially functioning as an "artificial pancreas". Inspired by natural body homeostasis, these platforms must be accurate and responsive for immediate corrective interventions. However, artificial MN patches often have slow readings due to factors like MN morphology and composition that remain poorly understood, hindering their optimization and integration into real-time monitoring devices. Despite extensive, iterative experimental efforts worldwide, a holistic framework incorporating the interaction between MN sensing and therapy with fluctuating natural body functions is missing. In this thesis, we propose a generalized framework for glycemic management based on the interaction between biological processes and MN-based operations. The results, incorporating theoretical insights from the 1960s and recent advancements in MN technology, are platform-agnostic. This generality offers a unique template to interpret experimental observations, justify the recent introduction of drugs like GLP-1 cocktails, and optimize platforms for accurate and fast disease management. </p>

<p dir="ltr">In today’s age of information, we are constantly informed about our surroundings by the network of distributed sensors to decide the next action. One major class of distributed sensors is wearable, implantable, and environmental (WIE) electrochemical sensors, widely used for analyte concentration measurement in personalized healthcare, environmental monitoring, smart agriculture, food, and chemical industries. Although WIE sensors offer an opportunity for prompt and prudent decisions, reliable sensing with such sensors is a big challenge. Among them, one is uncontrolled outside environment. Rapidly varying temperature, humidity, and target concentration increase noise and decrease the data reliability of the sensors. Second, because they are closely coupled to the physical world, they are subject to biofouling, radiation exposure, and water ingress which causes physical degradation. Moreover, to correct the drift due to degradation, frequent calibration is not possible once the sensor is deployed in the field. Another challenge is the energy supply needed to support the autonomous WIE sensors. If the sensor is wireless, it must be powered by a battery or an energy harvester. Unfortunately, batteries have limited lifetime and energy harvesters cannot supply power on-demand limiting their overall operation.</p><p dir="ltr">The objective of this thesis is to achieve reliable sensing with WIE sensors by overcoming the challenges of uncontrolled environment, drift or degradation, and calibration subject to limited power supplies. First, we have developed a concept of “Nernst thermometry” for potentiometric ion-selective electrodes (ISE) with which we have self-corrected concentration fluctuation due to uncontrolled temperature. Next, by using “Nernst thermometry,” we have developed a physics-guided data analysis method for drift detection and self-calibration of WIE ISE. For WIE sensor, wireless data transmission is an energy-intensive operation. To reduce unreliable data transmission, we have developed a statistical approach to monitor the credibility of the sensor continuously and transmit only credible sensor data. To understand and monitor the cause of ISE degradation, we have proposed a novel on-the-fly equivalent circuit extraction method that does not require any external power supply or complex measurements. To ensure an on-demand power supply, we have presented the concept of “signal as a source of energy.” By circuit simulation and long-term experimental analysis, we have shown that ISE can indefinitely sense and harvest energy from the analyte. We have theoretically calculated the maximum achievable power with such systems and presented ways to achieve it practically. Overall, the thesis presents a holistic approach to developing a self-sustainable WIE sensor with environmental variation correction, self-calibration, reliable data transmission, and lifelong self-powering capabilities, bringing smart agriculture and environmental sensing one step closer to reality.</p>

<p><strong>The Energy Monitoring Framework</strong>, designed and developed by IAC, IUPUI, aims to provide a cloud-based solution that combines business analytics with sensors for real-time energy management at the plant level using wireless sensor network technology.</p> <p>The project provides a platform where users can analyze the functioning of a plant using sensor data. The data would also help users to explore the energy usage trends and identify any energy leaks due to malfunctions or other environmental factors in their plant. Additionally, the users could check the machinery status in their plant and have the capability to control the equipment remotely.</p> <p>The main objectives of the project include the following:</p> <ul> <li>Set up a wireless network using sensors and smart implants with a base station/ controller.</li> <li>Deploy and connect the smart implants and sensors with the equipment in the plant that needs to be analyzed or controlled to improve their energy efficiency.</li> <li>Set up a generalized interface to collect and process the sensor data values and store the data in a database.</li> <li>Design and develop a generic database compatible with various companies irrespective of the type and size.</li> <li> Design and develop a web application with a generalized structure. Hence the database can be deployed at multiple companies with minimum customization. The web app should provide the users with a platform to interact with the data to analyze the sensor data and initiate commands to control the equipment.</li> </ul> <p>The General Structure of the project constitutes the following components:</p> <ul> <li>A wireless sensor network with a base station.</li> <li>An Edge PC, that interfaces with the sensor network to collect the sensor data and sends it out to the cloud server. The system also interfaces with the sensor network to send out command signals to control the switches/ actuators.</li> <li>A cloud that hosts a database and an API to collect and store information.</li> <li>A web application hosted in the cloud to provide an interactive platform for users to analyze the data.</li> </ul> <p>The project was demonstrated in:</p> <ul> <li>Lecture Hall (https://iac-lecture-hall.engr.iupui.edu/LectureHallFlask/).</li> <li>Test Bed (https://iac-testbed.engr.iupui.edu/testbedflask/).</li> <li>A company in Indiana.</li> </ul> <p>The above examples used sensors such as current sensors, temperature sensors, carbon dioxide sensors, and pressure sensors to set up the sensor network. The equipment was controlled using compactable switch nodes with the chosen sensor network protocol. The energy consumption details of each piece of equipment were measured over a few days. The data was validated, and the system worked as expected and helped the user to monitor, analyze and control the connected equipment remotely.</p> <p><br></p>

<p dir="ltr">Decades of semiconductor technology scaling and breakthroughs in communication technology have miniaturized computing, embedding it everywhere, enabling the development of smart things connected to the internet, forming the Internet of Things. Further miniaturization of devices has led to an exponential increase in the number of devices in and around the body in the last decade, forming a subset of IoT which is increasingly becoming popular as the Internet of Bodies (IoB). The gradual shift from the current form of human-electronics coexistence to human-electronics cooperation, is the vision of Internet of Bodies (IoB). This vision of a connected future with devices in and around our body talking to each other to assist their day-to-day functions demands energy efficient means of communication. Electro-Quasistatic Human Body Communication (EQS-HBC) has been proposed as an exciting alternative to traditional Radio Frequency based methodologies for communicating data around the body. In this dissertation, we expand the boundaries of wearable and implantable IoB nodes using Electro-Quasistatic Human Body Communication and Powering by developing advanced channel models and demonstrating novel applications.</p><p dir="ltr">Leveraging the advanced channel models developed for wearable EQS-HBC, we demonstrate wearable applications like ToSCom which extend the use cases of touchscreens to beyond touch detection and location to enable high-speed communication strictly through touch. We further demonstrate an application of EQS Resonant Human Body Powering to demonstrate Step-to-Charge, allowing mW-scale wireless power transfer to wearable devices. With increasing connected implanted healthcare devices becoming a part of the IoB space, we benchmark RF-based technologies for In-Body to Out-of-Body (IBOB) communication using novel in-vivo experiments. We then explore EQS-HBC in the realm of IBOB communication using advanced channel modeling, revealing its potential for low-power and physically secure data transfer from implantable devices to wearable nodes on the body, demonstrating its potential in extending the battery life span of implantable nodes. Finally, an overview of the potential of IoB devices is analyzed with the use of EQS-HBC where we propose a human-inspired distributed network of IoB nodes which brings us a step closer to the potential for perpetually operable devices in and around the body.</p>