This thesis focuses on the construction and role of benchmark quality computations in the area of non-covalent interactions. We have provided a detailed error analysis of focal-point schemes commonly used in benchmark quality computations, as well as provide error and speedup analysis of commonly used approximations to these methods. An analysis of basis set effects on higher-order corrections to MP2/CBS has been carried out, providing the community error bounds on future benchmarks. We demonstrate how these high-level computations can elucidate a better understanding of non-bonded interactions in chemistry as well as provide high-quality reference data to refit existing methods against to increase the overall accuracy of the method.

In dieser Doktorarbeit wurde die elektronische Struktur von konventionellen und unkonventionellen Supraleitern untersucht. Das Ziel dieser Arbeit war es, die dHvA Parameter zu berechnen und mit experimentellen Daten zu vergleichen. Mit Hilfe des Bandstrukturprogrammes FPLO, welches auf der DFT basiert, untersuchten wir Diboride (MgB$_2$ und TaB$_2$) und schwere Fermionenverbindungen (CeMIn$_5$ und PuMGa$_5$, M=Co, Rh, und Ir) innerhalb der LSD-Näherung. / In this thesis theoretical study of the electronic structure of conventional and unconventional superconductor compounds was carried out. The goal was to calculate the dHvA parameters in comparison with available experimental data. By means of FPLO band structure code based on DFT within LSDA we investigated diborides (MgB$_2$ and TaB$_2$) and heavy fermion compounds (CeMIn$_5$ and PuMGa$_5$, M=Co, Rh, and Ir).

<p>Molecular electronics is envisioned as a possible next step in device miniaturization. It is usually taken to mean the design and manufacturing of electronic devices and applications where organic molecules work as the fundamental functioning unit. It involves the easurement and manipulation of electronic response and transport in molecules attached to conducting leads. Organic molecules have the advantages over conventional solid state electronics of inherent small sizes, endless chemical diversity and ambient temperature low cost manufacturing.</p><p> In this thesis we investigate the switching and conducting properties of photochromic dithienylethene derivatives. Such molecules change their conformation in solution when acted upon by light. Photochromic molecules are attractive candidates for use in molecular electronics because of the switching between different states with different conducting properties. The possibility of optically controlling the conductance of the molecule attached to leads may lead to new device implementations.</p><p> The switching reaction is investigated with potential energy calculations for different values of the reaction coordinate between the closed and the open isomer. The electronic and atomic structure calculations are performed with density functional theory (DFT). It is concluded that there is a large potential energy barrier separating the open and closed isomer and that switching between open and closed forms must involve excited states. </p><p>The conducting properties of the molecule inserted between gold leads is calculated within the Non Equilibrium Green Function theory. The transmission function is calculated for the two isomers with different basis sizes for the gold contacts, as well as the electrostatic potential, for finite applied bias voltages. We conclude that a Au 6s basis give qualitatively the same result as a Au spd basis close to the Fermi level. The transmission coefficient at the Fermi energy is around 10 times larger in the closed molecule compared to the open. This will result in a large difference in conductivity. It is also found that the large difference in conductivity will remain for small applied bias voltages. The results are consistent with earlier work.</p>

Using photoemission spectroscopy (PES) the interface between the amino acid L-cysteine and a Au substrate was characterized to determine its electronic and chemical structure. L-cysteine was deposited on a Au substrate in several experiments via dipping into solution or via evaporation. The depositions were performed in several steps. Between deposition steps x-ray photoemission spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UPS) measurements were taken. XPS was used to characterize the chemical interaction at the interface while UPS was used to determine the orbital line-up at the interface and the highest molecular orbital (HOMO) structure of L-cysteine. The results indicate the formation of an interface state at approximately 1.5 eV above the L-cysteine HOMO.

P3HT (Poly(3-hexylthiophene)) is an organic polymer that shows promise as an active material in semiconducting electronics. It is important to study the electronic properties of this material in order to determine its efficacy in such devices. However, many current studies of thiophene only examine the oligomer, since it is a simpler material to investigate. In this study, several P3HT interfaces were analyzed to determine their electronic properties. The P3HT was deposited on Au, highly-ordered pyrolitic graphite (HOPG), and indium tin oxide (ITO) substrates via electrospray deposition. The depositions were performed in several steps, with x-ray photoemission spectroscopy (XPS) and ultraviolet photoemission spectroscopy (UPS) measurements taken between each step without breaking the vacuum. The resulting series of spectra allowed orbital line-up diagrams to be generated for each interface, giving detailed analysis of the interfacial properties, including the charge injection barriers and interface dipoles. The results, when compared to similar oligomer-based investigations, show a difference in the orbital line-up between oligomeric and polymeric P3HT junctions.

Density-functional theory has become an indispensible tool for studying matter on the atomic level, being routinely applied across diverse disciplines from solid-state physics to chemistry and molecular biology. Its failure to account for dispersion interactions has spurred intensive research over the past decade. In this thesis, a semilocal density-functional approximation including dispersion is developed by combining standard functionals for exchange and correlation with the nonempirical “exchange-hole dipole moment“ (XDM) dispersion model of Becke and Johnson. With a minimum of empiricism, the method accurately describes all types of noncovalent interactions, from the extremely weak dispersion forces in rare-gas systems to the hydrogen bonding and stacking interactions responsible for the structure and function of biological macromolecules such as DNA and proteins. The method is compatible with a wide variety of standard Gaussian basis sets, and is easily applied to any system that can be modeled with density-functional theory.

The purpose of the research work, presented in this thesis is to offer a detailed atomic level study of interfaces created by adsorption of organic molecules on metals and metal oxides to point out significant impact of substrate, dye structure as well as different mediators on the charge transfer at these interfaces, which is proven to influence the device performance to a great extent. Adsorption of organic photosensitive molecules on metals and metal-oxides is the main focus of this thesis. Phthalocyanines which are organic semiconductors offer a broad range of properties, such as thermal and chemical stability, high charge mobility and strong absorption coefficient in the visible and near-IR regions, which make them very attractive to be applied in various systems and devices. Fuel cells, organic field-effect transistors (OFETs), organic light emitting diodes (OLEDs) and solar cells are examples of phthalocyanine’s applications. The main focus of this work is to characterize the interfaces of Dye Sensitized Solar Cells (DSSCs). DSSC was invented by Michael Grätzel and Brian O’Regan in 1988. At the heart of this cell there is an oxide which is coated by a photosensitive dye. Under illumination, an electron is excited from HOMO to LUMO of the molecule, which can be further transferred to the conduction band of the oxide by a proper energy level alignment. The original state of the dye is regenerated by electron donation via the electrolyte, which usually is an organic solvent containing a redox couple e.g., iodide/triiodide. The iodide is regenerated by reduction of triiodide at the counter electrode. To improve the functionality of the cell, different additives can be added to the electrolyte. To mimic the interfaces of this cell, molecular layers of MPc (M: Fe, Zn, Mg) are adsorbed on both metallic surfaces, Au(111) and Pt(111), and rutile TiO2(110). Layers of iodine were inserted between metallic substrates and dyes to investigate the electronic properties and charge transfer at these multi-interface systems. 4-tert-butyl pyridine is a significant additive to the electrolyte and has proven to enhance the cell’s performance. This molecule was also adsorbed on Pt(111) and TiO2(110). Phthalocyanines were deposited by organic molecular beam deposition and 4TBP was evaporated at room temperature. Surface structures and reconstructions were confirmed by LEED measurements. Surface sensitive synchrotron radiation based spectroscopy methods, XPS and NEXAFS were applied to characterize these surfaces and interfaces. STM images directly give a topographical and electronic map over the surface. All measurements were carried out in UHV condition. When MPc was adsorbed on Au(111) and TiO2(110), charge transfer from molecule to substrate is suggested, while the opposite holds for MPc adsorbed on Pt(111). Moreover, stronger interaction between MPc and Pt(111) and TiO2(110) compared to Au(111) also demonstrates the effect of substrate on the charge transfer at the interface. The stronger interaction observed for these two substrates disturbed the smooth growth of a monolayer; it also resulted in bending of the molecular plane. Interaction of MPc with metallic surfaces was modified by inserting iodine at the interface. Another substrate-related effect was observed when MgPc was adsorbed on TiO2(110);  and -cross linked surfaces, where the surface reconstruction directly affect the molecular configuration as well as electronic structure at the interface. Besides, it is shown that the d-orbital filling of the central metal atom in MPc plays an important role for the properties of the molecular layer as well as charge transfer at the interface. Upon adsorption of 4TBP on Pt(111), C-H bond is dissociatively broken and molecules is adsorbed with N atoms down. Modification of surface by iodine, prevent this dissociation. In the low coverage of iodine, there is a competition between 4TBP and iodine to directly bind to Pt(111). Investigation on the adsorption of 4TBP on TiO2(110) illustrated that these molecules in low coverage regime, prefer the oxygen vacancy sites and their adsorption on these sites, results in a downward band bending at the substrate’s surface. / <p>QC 20131203</p>

It has been shown recently that high-quality epitaxial graphene (EPG) can be grown on the SiC substrate that exhibits interesting physical properties and has great advantages for varies device applications. In particular, the multilayer graphene films grown on the C-face show rotational disorder. It is expected that the twisted layers exhibit unique new physics that is distinct from that of either single layer graphene or graphite. In this work, by combining density functional and tight-binding model calculations, we investigate the electric field and doping effects on twisted bilayer graphene (TBG), multiple layer effects on twisted triple-layer graphene, and wave packet propagation properties of TBG. Though these studies, we obtain a comprehensive description of the interesting interlayer interaction in this twisted multilayer graphene system.

The sizes, shapes, relaxed atomic positions, eigenvalues, and total energies are calculated for selected ultra-small CdSe clusters using SIESTA, a software package for electronic structure calculations and molecular dynamics simulations of molecules and solids. The properties of these bare clusters with small numbers of constituent atoms are studied using density functional theory (DFT) for energy calculations and the conjugate gradient approximation as well as simulated annealing type of molecular dynamics techniques in relaxing the structure to find the lowest energy configurations.The ab-initio norm-conserving pseudopotentials, the exchange-correlation approximation, and parameters used in the computations by Siesta software is verified using FHI98PP, a package used to generate and test the ab-initio norm-conserving pseudopotentials. The initial position of the atomic co-ordinates is determined using ancillary software written in Matlab. / Department of Physics and Astronomy

Within recent years, allotropic structures of carbon have been produced in the forms of tubes and ribbons which offer the promise of extraordinary electronic and thermal properties. Here we present analyses of oligophenyl and oligoacene systems–infinite, one-dimensional chains of benzene rings linked along the armchair and zigzag directions. These one-dimensional structures, which are amenable to calculation by analytical means, exhibit features very similar to carbon nanotubes and nanoribbons. Using a tight-binding Hamiltonian we analytically determine the density of states, local density of states, and energy-band structure for the phenyl and the acene. We also examine the effect of disorder on the energies and the corresponding states. / Department of Physics and Astronomy