No presente trabalho foram estudados os espectros de RPE de um radical nitróxido, 4-hidroxi-2,2,6,6-tetrametilpiperidina-l-oxil (TEMPOL, 11), introduzido como impureza em uma matriz diamagnética, 4-hidroxi-2,2,6,6-tetrametilpiperidina (I), de estrutura conhecida. O uso do radical deuterado, 4-hidroxi-2,2,6,6 -tetrametilpiperidina-d17-l-oxil (PD-TEMPOL, 111) mostrou um aumento considerável na resolução dos espectros para a maioria das orientações do campo magnético. A interação do grupo paramagnético N-O com os prótons vizinhos foram estudadas e os tensores superhiperfinos de dois prótons fortemente acoplados foram determinados. Um desses prótons forma ponte de hidrogênio com o grupo N-O e a distância estimada é 2,09ª&#176. Os autovalores do tensor são: -5,2; 5,4 e -5,1 gauss. O segundo próton está mais distanciado do radical e provavelmente não forma ponte com o radical. Os valores nas direções principais são: 2,0; -1,7;e -2,7 gauss. Com a finalidade de estudar o envolvimento dos prótons na relação eletrônica dos radicais foram estimados os tempos de relaxação T1 e T2 no intervalo de temperatura de -160 a 25&#176C através do método de saturação continua. Foram obtidos os valores em diversas orientações para os radicais protonado (II) e deuterado - (III) para compará-los. Os valores de T2 obtidos são praticamente constante no intervalo de temperatura onde foram medidos e sistematicamente são maiores para o radical deuterado. O tempo de relaxação spin-rede, T1 é dependente da orientação para ambos os radicais. Em geral é obtida urna dependência linear de T1-1 versus T que foi explicada considerando um mecanismo de relaxação por tunelamento dos protons vizinhos entre dois poços de potenciais. Para o radical protonado é observada uma descontinuidade na curva de T1-1 versu T na região de -60&#176C; para o radical deuterado - isto é observado somente para algumas orientações. Este comporta mento poderia ser explicado como devido o congelamento da vibração das pontes de hidrogênio em torno desta temperatura. Um alagamento das linhas de RPE é observado para muitas orientações a partir de -100D&#176C que foi interpretado como devido o congelamento da rotação dos grupos metilas, do radical no caso (II) e da matriz no caso (I) / In the present work the ESR spectra of a nitroxide radical, 4-hydroxi-2,2,6,6-tetramethylpiperidine-l-oxyl (TANOL, lI), introduced as impurity in a diamagnetic host, 4-hydroxi-2, 2,6,6-tetramethylpiperidine (1), of know structure, has been investigated. The use of the deuterated radical, 4-hydroxi-2,2, 6,6-tetramethylpiperidine-d17-1-oxyl (PD-TANOL, 111) showed an improved resolution in the ESR spectra for most orientations of the magnetic field. The interactions of protons in the neighbourhood of the paramagnetic group N-O were studied and the superhyperfine tensors for the two strongly compled protons were determined one of these protons is hydrogen bonded to the N-O and the distance is estimated to be 2,09ª&#176. The superhyperfine tensor has principal values -5.2; +5.4; -5.1 gauss. The second proton is further away from the electron and probably is not hydrogen bonded. The principal values for this proton are 2.0; -1.7 and -2,7 gauss. In order to study the involvment of the protons in the electronic relaxation of the radicaIs, the relaxation times T1 and T2 were estimated in the temperature range -160&#176C 25&#176C for many orientations and comparing data for the protonated and deuterated radicaIs II and III, using the continuous wave saturation method. It is shown that the relaxation time T2 is practically constant in the temperature range studied and that it is sistematically greater for the deuterated radical implying narrower lines. The spin-lattice relaxation time TI is dependent upon the orientation of the magnetic field for both radicaIs. In general a linear temperature dependence of T1-1 versus T is obtained and a mechanism of tunelling of protons between close potential walls in used to explain this behavior. In the case of the protonated radical for many orientations of the magnetic field a break is observed in the T1-1 versus T curve around -60&#176C for the deuterated radical this is observed only for fewer orientations. This behaviour could be explained as due to the freezing of hydrogen bonds vibration near this temperature. For many orientations it is also observed that below -100&#176C a broadening of the ESR lines occurs which is probably re1ated to the freezing of the rotations of the methyl groups of the radical, in the case of II, and of the hast I in the case of radical III

Esta tese apresenta os resultados do estudo de eletrólitos poliméricos protônicos obtidos a base de gelatina e quitosana, modificadas através da adição de glicerol e formaldeído - ácidos acético ou clorídrico foram adicionados para promover a condutividade iônica dos filmes. Foram também preparadas blendas a partir de gelatina com quitosana, assim como filmes a base de gelatina e nanopartículas. Com exceção dos filmes com nanopartículas, todos eles possuem boa transparência, estabilidade térmica, maleabilidade, aderência ao vidro e apresentam uma superfície homogênea, sem trincas ou rachaduras. As temperaturas de transição vítrea (Tg) dos eletrólitos foram obtidas do estreitamento de linha de RMN. A taxa de relaxação spin-rede do \'ANTPOT. 1 H\' em função da temperatura mostrou um máximo bem definido cuja posição depende da concentração de ácido no caso da gelatina e da quantidade de glicerol no caso da quitosana, refletindo a alta mobilidade do próton nestes eletrólitos. As técnicas de RPE, onda contínua e pulsada, foram utilizadas para o estudo de eletrólitos dopados com \'CU\'CL\'O IND.4\'. Os valores de condutividade iônica dos eletrólitos são da ordem de \'10 POT.-5\' S/cm para os filmes de gelatina (com ácido acético ou clorídrico), quitosana e blendas e entre \'10 POT.-6\' a \'10 POT.-8\' para os eletrólitos de gelatina com nanopartículas. Estes estudos revelaram que a concentração de ácido acético ou clorídrico (na gelatina), influencia a condutividade iônica dos eletrólitos, mas, para o caso das blendas esta influência é pequena. No caso dos filmes de gelatina com nanopartículas, a condutividade diminui de forma significativa. Em relação aos eletrólitos de quitosana a condutividade iônica é influenciada pela quantidade de glicerol adicionado. Verificou-se que o aumento da temperatura até 80°C promove o aumento da condutividade iônica para todos os filmes estudados. / This thesis shows the results from the study of protonic polymer electrolytes obtained from gelatin and chitosan, modified by the addition of glycerol and formaldehyde - acetic and hydrochloric acids are added to promote the ionic conductivity of the films. Blends based on chitosan and gelatin were also prepared, as well as films based on gelatin and nanoparticles. With the exception of the films with nanoparticles, all samples presented good transparency, thermal stability, flexibility, adhesion to glass and homogeneous surface without cracks. The glass transition temperature (Tg) of the electrolytes were obtained from the NMR line narrowing. The spin-lattice relaxation rate of the \'ANTPOT. 1 H\' spin-network as a function of temperature showed a well-defined maximum whose position depends on the concentration of acid in the case of gelatin and on the glycerol content in the case of chitosan, reflecting the high mobility of the protons in the electrolytes. Continuous wave and pulsed EPR techniques were used to study the electrolytes doped with \'CU\'CL\'O IND.4\'. The values of the ionic conductivity of the electrolytes are of the order of \'10 POT.-5\' S/cm for the films of gelatin (with acetic or hydrochloric acids), chitosan and blends and from \'10 POT.-6\' to \'10 POT.-8\' for the electrolytes of gelatin with nanoparticles. These studies revealed that the concentration of acetic or hydrochloric acids (in gelatin), influences the ionic conductivity of the electrolytes but, in the case of blends, this influence is small. In the case of the films based on gelatin with nanoparticles, the ionic conductivity decreases significantly. In relation to the electrolyte based on chitosan, the ionic conductivity is influenced by the amount of glycerol added. It was found that increasing the temperature to 80°C promotes the increase of ionic conductivity for all films studied.

La surexploitation des ressources de la planète est aujourd’hui une problématique de premier ordre, et fait du remplacement des sources non renouvelables, d'énergie et de matières premières, l’un des défis majeurs du XXIe siècle. Dans cet objectif, les lignines, par leur disponibilité et leur biocompatibilité, apparaissent comme l’une des alternatives aux ressources fossiles. C’est dans ce contexte que le Laboratoire PEIRENE a décidé de mener ce travail de thèse portant sur le développement de nouveaux matériaux photosensibles à base de lignines modifiées. Dans ce but, trois lignines d’origines différentes ont été acétylées. Leur étude par spectroscopie RPE a révélé que le blocage de leurs fonctions antioxydantes augmente considérablement la quantité d’espèces réactives de l’oxygène qu’elles sont capables de générer sous irradiation lumineuse, permettant ainsi d’envisager l’utilisation de ce biopolymère modifié dans de nombreux domaines tels que le traitement photodynamique antimicrobien. Afin de les rendre hydrodispersibles et d’élargir ainsi leur champ d’applications, ces matériaux aux propriétés prometteuses ont été mis sous forme de nanoparticules puis, leur comportement photosensible a été lui aussi évalué par spectroscopie RPE. Il a ainsi été démontré qu’une fois dispersées dans l’eau sous la forme de nanoparticules, les lignines acétylées étaient toujours capables de produire de l’oxygène singulet sous irradiation lumineuse. Cette activité, qui n’a pas encore été reportée dans la littérature à notre connaissance, reste cependant assez restreinte et nécessite donc d’être améliorée. Afin d’élargir le domaine du spectre solaire permettant leur activation, un photosensibilisateur a par ailleurs été associé à ces nano-objets par encapsulation et par greffage covalent. L’ensemble des résultats découlant de ces travaux permettent d’envisager le développement de systèmes à base de nanoparticules de lignines acétylées dans de nombreux domaines, notamment pharmaceutique et phytosanitaire. / The overexploitation of the planet's resources is nowadays a major problem and makes the replacement of non-renewable sources of energy and raw materials, one of the major challenges of the XXIe century. For this purpose, lignins, by their availability and their biocompatibility, appear as one of the alternatives to fossil resourcesIn this context, the PEIRENE Laboratory decided to carry out this PhD work on the development of new photosensitive materials based on modified lignins. For this purpose, three lignins from different origin were acetylated. Their study by EPR spectroscopy revealed that blocking their antioxidant functions considerably increases the quantity of reactive oxygen species they are able to generate under light irradiation. Thus it is possible to envisage the use of this modified biopolymer in many areas such as antimicrobial photodynamic therapy. In order to make them water-dispersible and thus to widen their field of applications, these materials with promising properties were put in the form of nanoparticles. Their photosensitive behavior has been also valuated by EPR spectroscopy. It has been demonstrated that once dispersed in water in the form of nanoparticles, the acetylated lignins were still capable of producing singlet oxygen under light irradiation. This activity, which has not yet been reported in the literature to our knowledge, however, remains quite limited and therefore needs to be improved. In order to widen the range of the solar spectrum allowing their activation, a photosensitizer has also been associated with these nano-objects by encapsulation and covalent grafting. The results of these studies make possible to envisage the development of systems based on acetylated lignins nanoparticles in in many field, in particular pharmaceutical and phytosanitary.

Le photosystème II (PSII) est un complexe multi-protéique qui utilise l'énergie solaire pour oxyder l'eau et réduire des quinones. Le site catalytique d'oxydation de l'eau est localisé coté lumen du complexe, alors, que le site de réduction comprenant deux quinones (QA et QB) et un fer non-hémique est localisé sur le coté stromal du complexe membranaire. Dans cette thèse j'ai étudié les deux cotés accepteur et donneur d'électrons du PSII.QA•- et QB•- sont couplés magnétiquement au fer non-hémique donnant de faibles signaux RPE. Le fer non-hémique possède quatre ligands histidines et un ligand (bi)carbonate échangeable. Le formate peut échanger le ligand (bi)carbonate induisant un ralentissement dans le transfert d'électrons. Ici, je décris une modification du signal RPE de QB•- Fe2+ lorsque le formate est substitué au (bi)carbonate. J'ai aussi découvert un second signal RPE dû à la présence du formate à la place du (bi)carbonate lorsque QB est doublement réduit. De plus, j'ai trouvé que les signaux RPE natifs de QA•- Fe2+ et QB•- Fe2+ possèdent une signature intense encore jamais détectée. Tous les signaux RPE rapportés dans cette thèse devraient faciliter le titrage redox de QB par RPE. J'ai aussi observé que QB•- peut oxyder le fer non-hémique à l'obscurité en anaérobie. Cette observation implique qu'au moins dans une fraction des centres, le couple QB•-/QBH2 possède un potentiel redox plus haut que supposé. La quantification du nombre de centres où cette oxydation du fer se produit par le couple QB•-/QBH2 reste à faire. La réduction du PSII par le dithionite génère un signal modifié de QA•-Fe2+, un changement structural du PSII observé par électrophorèse. Cela peut indiquer la réduction d'un pont disulfure à l'intérieur du PSII. Concernant le site d’oxydation de l'eau, j'ai étudié la première étape de l'assemblage du site catalytique (Mn4Ca), en suivant l'oxydation du Mn2+ par RPE en bande X et haut champ. J'ai mis au point des conditions expérimentales permettant le piégeage du premier intermédiaire et j'ai aussi trouvé une incohérence avec des travaux publiés dans la littérature. J'ai aussi trouvé que le dithionite pouvait réduire le site catalytique Mn4Ca, en formant des états sur-réduits qui peuvent correspondre aux intermédiaires de l'assemblage du cluster Mn4Ca. / Photosystem II (PSII) uses light energy to oxidise water and reduce quinone. The water oxidation site is a Mn4Ca cluster located on the luminal side of the membrane protein complex, while the quinone reduction site is made up of two quinones (QA and QB) and a non-heme Fe2+ located on the stromal side of the membrane protein. In this thesis I worked on both oxidation and reduction functions of the enzyme. QA•- and QB•- are magnetically couple to the Fe2+ giving weak and complex EPR signals. The distorted octahedral Fe2+ has four histidines ligands and an exchangeable (bi)carbonate ligand. Formate can displace the exchangeable (bi)carbonate ligand, slowing electron transfer out of the PSII reaction centre. Here I report the formate-modified QB•- Fe2+ EPR signal, and this shows marked spectral changes and has a greatly enhanced intensity. I also discovered a second new EPR signal from formate-treated PSII that is attributed to formate-modified QA•- Fe2+ in the presence of a 2-electron reduced form of QB. In addition, I found that the native QA•- Fe2+ and QB•- Fe2+ EPR signals have a strong feature that had been previously missed because of overlapping signals (mainly the stable tyrosyl radical TyrD•). These previously unreported EPR signals should allow for the redox potential of this cofactor to be directly determined for the first time. I also observed that when QB•-Fe was formed; it was able to oxidise the iron slowly in the dark. This occurred in samples pumped to remove O2. This observation implies that at least in some centres, the QB•-/QBH2 couple has a higher potential then is often assumed and thus that the protein-bound semiquinone is thermodynamically less stable expected. It has yet to be determined if this represents a situation occurring in the majority of centres. Treatment of the system with dithionite generated a modified form of QA•-Fe2+ state and a change in the association of the proteins on gels. This indicates a redox induced modification of the protein, possibly structurally important cysteine bridge in PSII.On the water oxidation side of the enzyme, I studied the first step in the assembly of the Mn4Ca cluster looking at Mn2+ oxidation using kinetic EPR and high field EPR. Conditions were found for stabilising the first oxidised state and some discrepancies with the literature were observed. I also found that dithionite could be used to reduce the Mn4Ca, forming states that are formally equivalent to those that exist during the assembly of the enzyme.

Esta tese apresenta os resultados do estudo de eletrólitos poliméricos protônicos obtidos a base de gelatina e quitosana, modificadas através da adição de glicerol e formaldeído - ácidos acético ou clorídrico foram adicionados para promover a condutividade iônica dos filmes. Foram também preparadas blendas a partir de gelatina com quitosana, assim como filmes a base de gelatina e nanopartículas. Com exceção dos filmes com nanopartículas, todos eles possuem boa transparência, estabilidade térmica, maleabilidade, aderência ao vidro e apresentam uma superfície homogênea, sem trincas ou rachaduras. As temperaturas de transição vítrea (Tg) dos eletrólitos foram obtidas do estreitamento de linha de RMN. A taxa de relaxação spin-rede do \'ANTPOT. 1 H\' em função da temperatura mostrou um máximo bem definido cuja posição depende da concentração de ácido no caso da gelatina e da quantidade de glicerol no caso da quitosana, refletindo a alta mobilidade do próton nestes eletrólitos. As técnicas de RPE, onda contínua e pulsada, foram utilizadas para o estudo de eletrólitos dopados com \'CU\'CL\'O IND.4\'. Os valores de condutividade iônica dos eletrólitos são da ordem de \'10 POT.-5\' S/cm para os filmes de gelatina (com ácido acético ou clorídrico), quitosana e blendas e entre \'10 POT.-6\' a \'10 POT.-8\' para os eletrólitos de gelatina com nanopartículas. Estes estudos revelaram que a concentração de ácido acético ou clorídrico (na gelatina), influencia a condutividade iônica dos eletrólitos, mas, para o caso das blendas esta influência é pequena. No caso dos filmes de gelatina com nanopartículas, a condutividade diminui de forma significativa. Em relação aos eletrólitos de quitosana a condutividade iônica é influenciada pela quantidade de glicerol adicionado. Verificou-se que o aumento da temperatura até 80°C promove o aumento da condutividade iônica para todos os filmes estudados. / This thesis shows the results from the study of protonic polymer electrolytes obtained from gelatin and chitosan, modified by the addition of glycerol and formaldehyde - acetic and hydrochloric acids are added to promote the ionic conductivity of the films. Blends based on chitosan and gelatin were also prepared, as well as films based on gelatin and nanoparticles. With the exception of the films with nanoparticles, all samples presented good transparency, thermal stability, flexibility, adhesion to glass and homogeneous surface without cracks. The glass transition temperature (Tg) of the electrolytes were obtained from the NMR line narrowing. The spin-lattice relaxation rate of the \'ANTPOT. 1 H\' spin-network as a function of temperature showed a well-defined maximum whose position depends on the concentration of acid in the case of gelatin and on the glycerol content in the case of chitosan, reflecting the high mobility of the protons in the electrolytes. Continuous wave and pulsed EPR techniques were used to study the electrolytes doped with \'CU\'CL\'O IND.4\'. The values of the ionic conductivity of the electrolytes are of the order of \'10 POT.-5\' S/cm for the films of gelatin (with acetic or hydrochloric acids), chitosan and blends and from \'10 POT.-6\' to \'10 POT.-8\' for the electrolytes of gelatin with nanoparticles. These studies revealed that the concentration of acetic or hydrochloric acids (in gelatin), influences the ionic conductivity of the electrolytes but, in the case of blends, this influence is small. In the case of the films based on gelatin with nanoparticles, the ionic conductivity decreases significantly. In relation to the electrolyte based on chitosan, the ionic conductivity is influenced by the amount of glycerol added. It was found that increasing the temperature to 80°C promotes the increase of ionic conductivity for all films studied.

Mon objectif a consisté à élucider à l'échelle moléculaire le fonctionnement des systèmes enzymatiques complexes impliqués dans des processus de conversion d'énergie chez les êtres vivants. Je m'intéresse en particulier à la compréhension de deux étapes clés du fonctionnement commun à un grand nombre de ces systèmes, à savoir (i) les étapes d'interaction de ces complexes avec les quinones membranaires et (ii) les mécanismes catalytiques au niveau des sites actifs à molybdène. Le système modèle que j'étudie est la nitrate réductase A issue de la bactérie E. coli, en collaboration avec l'équipe du Dr. Axel Magalon (LCB, Marseille). Il permet la respiration anaérobie en catalysant la réduction du nitrate en nitrite et joue un rôle important dans le cycle biogéochimique de l'azote. Ma recherche vise en particulier à identifier les facteurs moléculaires qui permettent d'ajuster la réactivité de ces systèmes. Cela nécessite l'obtention d'informations structurales à l'échelle atomique sur ces complexes macromoléculaires. La stratégie utilisée a consisté dans un premier temps à générer des intermédiaires paramagnétiques clefs du fonctionnement de ces systèmes (radicaux semiquinones ou ion MoV). Puis j'ai caractérisé leurs propriétés rédox par potentiométrie suivie par spectroscopie RPE. Enfin, j'ai utilisé les techniques de spectroscopie RPE impulsionnelle à haute résolution, notamment la spectroscopie de corrélation des sous niveaux hyperfins (HYSCORE) pour sonder l'environnement magnétique local de ces intermédiaires à travers la détection des interactions nucléaires hyperfines et quadripolaires qui sont trop faibles pour être visibles par spectroscopie RPE classique. / The aim of my work is to elucidate at the molecular level the structure and the function of enzymes involved in energy conversion processes in living organisms. In particular, it is focused on the understanding of two important steps found in many of these systems, namely (i) their interaction with membrane quinones acting as electron/proton shuttles and (ii) the catalytic mechanism at the molybdenum active site. The nitrate reductase A (NarGHI) from the bacterium Escherichia coli is used as a model for these studies. This membrane-bound complex reduces nitrate into nitrite during anaerobic respiration and plays therefore an important role in the global nitrogen cycle. The goal of my research is mainly devoted to the identification of the molecular factors tuning the reactivity of this system at the two active sites. For this purpose, I mainly relied on the structural characterization of key paramagnetic intermediates e.g. semiquinone radicals or Mo(V) ion using electron paramagnetic resonance (EPR) spectroscopy in combination with rédox potentiometry. High resolution pulse EPR methods, especially Hyperfine Sublevel Correlation (HYSCORE) spectroscopy, were used to probe their local environment through the detection of hyperfine (and eventually quadrupole interactions) to nearby magnetic nuclei that are otherwise too weak to be measurable in conventional continuous wave EPR spectroscopy.

Ce travail de thèse porte sur l'étude par la résonance paramagnétique électronique (RPE) des sels à transfert de charge quasi-unidimensionnels (TMTTF)$ {2}$X (X=AsF$ {6}$, PF$ {6}$, SbF$ {6}$), matériaux modèles de chaînes de spins quantiques. Tout d'abord, nous avons examiné en onde continue et sur une large gamme de température et de fréquence, la phase d'ordre de charge déjà observée dans ces matériaux en dessous de la température T$ {CO}$. Nous avons mis en évidence deux nouveaux phénomènes à T < T$ {CO}$: la rotation des axes principaux du facteur g et une modification structurale liée à un dédoublement de la maille cristallographique. Un calcul de chimie quantique a été réalisé à l'aide de la méthode DFT confirmant nos résultats expérimentaux. Dans la seconde partie de ces travaux de thèse, nous avons présenté les résultats obtenus par RPE en onde continue et en onde pulsée sur l'étude des défauts corrélés dans les systèmes à chaînes de spins. En onde continue, nous avons détecté pour la première fois une raie RPE fine à basse température, suggérant la présence de défauts corrélés ayant les caractéristiques de solitons. Les mesures par RPE pulsée nous ont permis d'observer les premières oscillations de Rabi de solitons piégés et de déterminer leur caractère robuste. Ces derniers résultats offrent une approche alternative aux qubits à base de spins pour le traitement de l’information quantique. / This thesis focuses on the study by Electron Paramagnetic Resonance (EPR) of the quasi-one-dimensional charge transfer salts (TMTTF)$ {2}$X (X=AsF$ {6}$, PF$ {6}$, SbF$ {6}$), model materials of quantum spin chains. First, we have examined in continuous wave and on a wide range of temperature and frequency, the charge-ordered phase already observed in these materials below the temperature T$ {CO}$. We have identified two new phenomena at T <T$ {CO}$: the rotation of the principal axes of the g factor and a structural change related to a doubling of the unit cell parameter. A quantum chemical calculation was carried out using DFT confirming our experimental results. In the second part of the thesis, we have presented the results obtained by EPR in continuous wave and pulsed wave on the correlated defects study in spin chain systems. In continuous wave, we have detected for the first time a narrow EPR line at low temperature, suggesting the presence of correlated defects having the characteristics of solitons. The pulsed EPR measurements allowed us to observe the first Rabi oscillations of trapped solitons and to determine their robust character. These latter results offer an alternative approach for spin qubits in quantum information processing.

Cette thèse est consacrée à l'étude théorique et expérimentale de différents niveaux de corrélations quantiques en variables continues, mettant en jeu une ou deux quadratures. Dans cet objectif, un oscillateur paramétrique optique de type II, où signal et complémentaire sont émis suivant des polarisations orthogonales, a été développé. Une lame biréfringente introduite à l'intérieur de la cavité induit un couplage des deux modes et permet un fonctionnement dégénéré en fréquence. <br /><br />Un protocole original de préparation conditionnelle d'un état non-classique, de distribution statistique sub-Poissonienne, a été étudié théoriquement et mis en oeuvre expérimentalement. Il repose sur les corrélations d'intensité des faisceaux émis au-dessus du seuil en l'absence de lame. Une compression de 9.5 dB du bruit sur la différence d'intensité a été obtenue.<br /><br />En présence de la lame, les faisceaux émis sont dégénérés en fréquence et en principe intriqués. La dégénérescence a permis la première mesure des anti-corrélations de phase au-dessus du seuil. Malgré un excès de bruit qui reste à expliquer, ce résultat ouvre une voie intéressante pour la génération directe d'états intriqués intenses. L'oscillateur paramétrique optique, avec ou sans lame, peut également fonctionner au-dessous du seuil et générer des faisceaux fortement intriqués. L'intrication obtenue, stable pendant plusieurs heures, est la plus forte observée à ce jour et elle est préservée jusqu'à des fréquences de bruit très basses. En présence de la lame, les propriétés quantiques originales du système sont également détaillées et une opération passive, réalisée à l'aide de lames biréfringentes, est mise en évidence pour optimiser l'intrication. L'action d'opérations passives sur un état à deux modes est discutée théoriquement.

La protéase du VIH-1 est une cible de choix dans le traitement du SIDA, car l’inhibition de son activité protéolytique contrecarre la réplication virale. Dans ce contexte, une approche de conception de novo d’inhibiteurs non peptidiques de cet enzyme, réalisée au sein de notre laboratoire, avait permis d’épingler une famille originale de complexes métallo-organiques au cuivre (II). Au cours de cette thèse, nous avons entrepris la caractérisation physico-chimique et structurale de ces composés afin d’élucider leur mode d’interaction avec la protéase, en nous appuyant sur diverses techniques expérimentales (DRX, RPE, ESI-MS) et théoriques(mécanique moléculaire, SIBFA). En particulier, nous avons montré que la stabilité thermodynamique de ces complexes en solution était indispensable à toute activité biologique. L’adaptation de la méthode SIBFA aux complexes au cuivre (II) nous a permis d’étudier les phénomènes énergétiques intervenant dans leur stabilité. Enfin, nous avons réuni les critères structuraux responsables de l’activité anti-protéolytique de ces complexes au sein d’un modèle pharmacophorique optimalisé./HIV-1 protease is a main target for the AIDS treatment, because its inhibition blocks the viral replication. De novo drug design, previously conducted in our laboratory, had pointed out several copper (II) chelates as a new family of non peptidic protease inhibitors. In order to provide a better understanding of their structure-activity relationships, we performed the physico-chemical characterization of these compounds using experimental (XRD, EPR, ESIMS)and theoretical (molecular mechanics, SIBFA method) techniques. We demonstrated that the thermodynamic stability of the complexes is an essential property to provide inhibitory activity. The SIBFA procedure adapted to copper (II) complexes helped us to study the energetics involved in the stability process. From our results, we derived a pharmacophore model describing the structural properties needed to achieve a good inhibition of the enzyme.

In the present work the effect of isothermal ageing treatment on the microstructure and on the localized corrosion resistance of a duplex stainless steel (DSS) was investigated. Specimens taken from a hot rolled cylindrical duplex stainless bar with 22% Cr grade were solution annealed at 1050&deg / C and then sensitization heat treatments were conducted at 650, 725 and 800&deg / C with duration ranging from 100 to 31622 min. The microstructural changes were examined by the light optical microscopy (LOM) and scanning electron microscopy (SEM). XRD technique and EDS analysis were used for microstructural evolution. Double Loop Electrochemical Potentiodynamic Reactivation (DLEPR) and standard weight loss immersion acid tests were performed in order to determine the degree of sensitization (DOS) to intergranular corrosion. The surfaces remained after the DLEPR test and the weight loss immersion test were also examined to observe the attack locations and their relationship with the chromium depleted zones. The degree of sensitization is measured by determining the ratio of the maximum current generated by the reactivation (reverse) scan to that of the anodic (forward) scan, (Ir/Ia) x 100. Ir is very small (less than 10-5 A/cm2) for solution annealed samples at 1050&deg / C for 1 hr and those aged at 650&deg / C for 100 and 316 min after the solution heat treatment, with the Ir/Ia ratios of 0.027634%, 0.033428% and 0.058928% respectively. Hence these samples were considered as unsensitized and their microstructure was composed of primary ferrite and austenite. However, Ir increased to values as high as 10-2 A/cm2 and even approached Ia for all samples aged for other temperatures and times, associated with high Ir/Ia ratios. The increased degree of sensitization can be attributed to stronger effect of chromium and molybdenum depleted areas. The microstructure was composed of primary ferrite and austenite including also sigma phase and the secondary austenite that would be responsible for the localized chromium impoverishment. The time required for sensitization was shorter in samples aged at higher temperatures. Accordingly ageing times of 1000 min at 725&deg / C and of 316 min at 800&deg / C were sufficient, whereas times longer than 10000 min was needed to achieve a sensitized structure at 650&deg / C.