The original aim of my diploma thesis was examination of fixed samples of cladocerans from the Daphnia longispina species complex from reservoirs Vír and Vranov for the presence of 4 groups of microparasites: microsporidia, oomycetes, the protozoan Caullerya mesnili, and the yeast Metschnikowia bicuspidata. The next aim was to determine the effect of parasites on Daphnia fecundity, and determination of their spatial and temporal distribution within reservoirs. From the total number 4452 of examined Daphnia females, however, only 56 individuals were infected. This number was not sufficient for the planned analyses. As I recorded for all examined individuals the clutch size, I thus dealt to a large extent with an alternative issue: the temporal and spatial variation of, and the influence of environmental factors on Daphnia fecundity. Both studied reservoirs are characteristic by canyon-shaped profile that allows formation of environmental gradients on the horizontal as well as vertical axis. The results confirm that reservoir identity, season, and location within the reservoir (or gradient of food supply) have all significant effects on fecundity. During my work I have encountered difficulties associated with determining microparazites from fixed zooplankton samples. The appendix section of my thesis...

Neste trabalho, apresenta-se uma adaptação dos procedimentos utilizados nos códigos computacionais seqüenciais advindos do MEF, para utilizá-los em multicomputadores. Desenvolve-se uma rotina para a montagem do sistema linear particionado entre os diversos processadores. Resolve-se o sistema de equações lineares geradas mediante a rotina do PIM (Parallel Iterative Method). São feitas adaptações deste pacote para se aproveitar as características comuns do sistema linear gerado pelo MEF: esparsidade e simetria. A técnica de resolução do sistema em paralelo é otimizada com o uso de dois tipos de pré-condicionadores: a decomposição incompleta de Cholesky (IC) generalizado e o POLY(0) ou Jacobi. É feita uma aplicação para a solução de pavimento com o algoritmo-base totalmente paralelizado. Também é avaliada a solução do sistema de equações de uma treliça. Mostram-se resultados de speed-up, de eficiência e de tempo para estes dois modelos estruturais. Além disso, é feito um estudo em processamento seqüencial da performance dos pré-condicionadores genéricos (IC) e do advindo de uma série truncada de Neumann, também generalizada, utilizando-se modelos estruturais de placa e chapa. / This work presents an adaptation of conventional finite element method (FEM) computing procedures to multicomputers. It is presented the procedure which the linear system of equations is split among the processor and its solution. It was improved a public software called PIM (Parallel Iterative Method) is used to solve this system of equations. These improvements explore efficiently the usual features of the FEM systems of equations: sparseness and symmetry. To improve the solution of the system, two different preconditioners are used: a generic Incomplete Cholesky (IC) and the Polynomial preconditioning (POLY(0) or Jacobi). It is carried out a full adaptation of the method to parallel computing with a program developed to analyse floor structures. The improved PIM is also used to solve the system of equations of a tri-dimensional truss. It is presented the speed-up, the efficiency and the time used in the resolution of the systems of equations for the floor and for the truss. It is also presented a study of performance in sequential processing of the generic (IC) and the generic Neumann series preconditioners in the analysis of plates in bending and in plane actions.

A metodologia GMAX, (Gradient-Modulated Adiabatic Excitation), caracteriza-se pelo uso de pulsos adiabáticos para localização de volumes em espectroscopia e seleção de fatias em MRI. A sua utilidade surge do interessante perfil de inversão da magnetização transversal induzido ao longo da amostra. Entretanto, a interpretação desse comportamento tem sido dada apenas de forma qualitativa, através da utilização da condição de adiabaticidade como ponto de partida. Neste trabalho é apresentada uma descrição analítica partindo da solução em termos da função hipergeométrica para os pulsos sech e tanh. A partir desse procedimento encontramos um conjunto de resultados com os quais é possível inferir analiticamente o comportamento característico da magnetização, tendo como objetivo obter um maior controle da magnetização a partir dos parâmetros da metodologia que proporcionam interpretação física. / The Gradient-Modulated Adiabatic Excitation (GMAX) methodology is characterized by the use of adiabatic pulses for volume localization in spectroscopy and slice selection in MRI. Its use derives from the interesting nodal point transverse magnetization profile induced throughout the sample. Nevertheless, the interpretation of such behavior for the magnetization has been of qualitative purpose only, using the adiabatic condition as a starting point. Here, we present an analytical description, starting from the solution in terms of the hypergeometric functions for sech and tanh pulses. From this procedure we found a set of results with which is possible to infer analytically the characteristic behavior of the magnetization. This is on the purpose of obtaining greater control of the magnetization from parameters of the methodology that carry physical interpretation.

Vulcões ativos na Antártica contrastam com a paisagem predominantemente gelada do continente. Eles fornecem condições únicas capazes de selecionar uma grande variedade de adaptações microbianas. A Ilha Deception localiza-se na região da Península Antártica e difere de outros vulcões antárticos especialmente pela influência marinha e temperaturas mais elevadas. Foram coletadas amostras de sedimentos associados a fumarolas e geleiras em dois sítios geotermais de Deception, com temperaturas variando entre 0°C a 98°C. Diferentes técnicas independentes de cultivo foram empregadas com o intuito de entender como as comunidades microbianas respondem as variações ambientais extremas produzidas pela atividade vulcânica. Os resultados indicaram que a co-ocorrência de arqueias hipertermófilas e suas adaptações com micro-organismos metabolicamente diversos adaptados a regiões geladas representa uma estrutura de comunidades única para ecossistemas antárticos. Este trabalho forneceu dados ineditos sobre questoes centrais de diversidade e adaptacao microbiana a ambientes geotermais polares. / Active volcanoes in Antarctica contrast with the predominately icy landscape. They harbor unique conditions capable to select an extreme range of microbial adaptations. Deception Island is located in the Antarctic Peninsula region and differs from other Antarctic volcanoes specially by its higher temperatures and marine influence. We collected sediment samples associated to active fumaroles and glaciers on two geothermal sites of Deception Island, with temperatures ranging from 0°C to 98°C. Different cultivation-indepedent techniques were used to understand how microbial communities respond to extreme environmental variations produced by volcanic activity. The results indicate that co-occurrence of hyperthermophiles and their specific adaptations with metabolically diverse cold-adapted micro-organisms represents a unique community structure for antarctic ecosystems. This study provided primordial data on central questions about microbial diversity and adaptation to polar geothermal environments.

Depuis 1984, les matériaux à gradients de fonction (FGM) permettent de former une barrière thermique et réduire les fortes discontinuités des propriétés entre deux matériaux de nature différente. Ces multi-matériaux, qui consistent en une variation intentionnelle de la composition chimique entrainant par conséquent une modification des propriétés microstructurales, chimiques, mécaniques et thermiques, permettent de lisser la distribution des contraintes thermiques. L’élaboration in situ de ces alliages sur mesure est rendu possible grâce à l’utilisation de procédés de fabrication additive tel que le procédé par dépôt de poudres DED-CLAD®. Ces procédés connaissent un essor considérable depuis les années 1980 et sont idéaux dans la fabrication de FGM. Dans le cadre de cette thèse CIFRE, des développements techniques ont été effectués pour adapter le procédé DED-CLAD® et permettre la réalisation de FGM. Grâce à plusieurs collaborations industrielles, une étude complète a été réalisée sur les alliages titane-molybdène et titane-niobium. Ces alliages permettent dans le premier cas de réaliser des pièces résistantes à de fortes sollicitations thermiques (secteur spatial), et dans le second cas d’associer les propriétés mécaniques et la biocompatibilité (secteur biomédical). L’originalité de cette thèse repose sur l’étude d’un gradient complet, c’est-à-dire que l’ajout en élément d’alliage varie de 0% à 100%. En effet, les études reportées dans la littérature ne font pas mentions des alliages titane-matériaux réfractaire pour des taux élevés en élément réfractaire. Les analyses microstructurale (DRX, structure cristallographique par EBSD, microstructure), chimique (EDS) et mécanique (microdureté, tests de traction et essais d’indentation instrumentée) ont mis en évidence une évolution des propriétés le long du gradients de composition. La caractérisation mécanique des échantillons par indentation instrumentée s’est par ailleurs révélée particulièrement pertinente dans les cas de ces multi-matériaux / Since 1984, the Functionally Graded Material (FGM) allow to create a thermal barrier and to reduce the strong discontinuities of properties between two materials of different composition. These multimaterials,whose consist of an intentional variation in the chemical composition and, consequently, modify the microstructural, chemical, mechanical and thermal properties, lead to a smooth distribution of the thermal stress. The in-situ development of these custom-made alloys is made possible by the use of additive manufacturing processes such as the DED-CLAD® powder deposition process. These processes have grown substantially since the 1980s and are optimal for the manufacture of FGM. During this industrial thesis, technical developments have been carried out to adapt the DED-CLAD® process and to allow the manufacturing of FGM. Thanks to two industrial collaborations, a full study was carried out on titanium-molybdenum and titanium-niobium alloys. These alloys make it possible, in the first case, to produce parts resistant to strong thermal stress (space sector), and in the second case to combine mechanical properties and biocompatibility (biomedical sector). The originality of this thesis rests on the study of a complete gradient, that is the addition in alloy element varied from 0% to 100%. In fact, studies reported in the literature do not mention titanium-refractory material for high levels of refractory element. Microstructural (XRD, crystallographic analysis by EBSD technique), chemical (EDS) and mechanical (microhardness, tensile test and instrumented indentation) analyses revealed an evolution of the properties along the chemical gradient. The mechanical characterization of the sample by instrumented indentation has also proved particularly relevant in the case of these multi-materials

Esta tese apresenta soluções para o gerenciamento e otimização de temperatura para sistemas de codificação de vídeo baseados nas características da aplicação e no conteúdo dos vídeos digitais. Diferente dos trabalhos estado-da-arte, as soluções propostas nesta tese focam em técnicas de gerenciamento de temperatura no nível da aplicação e características da aplicação codificação de vídeo e as propriedades dos vídeos digitais são explorados para desenvolver soluções termais para a codificação de vídeo com baixas perdas na qualidade de serviço das aplicações. Diversas análises são realizadas considerando a aplicação de codificação de vídeo para entender o comportamento da temperatura durante o processo de codificação para diferentes sequências de vídeo. Com base nos resultados das análises, soluções com diferentes abordagens são propostas para atenuar os efeitos da temperatura nos sistemas de codificação de vídeo. Gerenciamento de temperatura baseado nas características da aplicação para o padrão de codificação HEVC usa uma técnica de seleção de configuração em tempo de execução para manter a temperatura abaixo dos limites seguros de operação com bons resultados de qualidade de vídeo. Otimização de temperatura baseado em computação imprecisa usa aproximações baseadas em conteúdo para reduzir a temperatura de chips executando o HEVC. Um escalonador de tarefas que usa características da aplicação para guiar o escalonamento de threads focando na redução dos gradientes espaciais de temperatura que são resultantes do desbalanceamento natural de cargas entre as threads da aplicação. As soluções propostas são capazes de reduzir em até 10 ºC a temperatura do chip com perdas insignificantes na eficiência de compressão. Os resultados de qualidade objetiva (medida usando PSNR) são de 12 dBs até 20 dBs maiores quando comparados com trabalhos da literatura. Além disso, o escalonador de tarefas proposto é capaz de eliminar os gradientes espaciais de temperatura maiores que 5 ºC para arquitetura multi-cores. Como principal conclusão, esta tese demonstra que as técnicas de gerenciamento de temperatura que usam o conhecimento da aplicação de maneira conjunta com as propriedades dos vídeos digitais tem um alto potencial para melhorar os resultados de temperatura de sistemas de codificação de vídeo mantendo bons resultados de qualidade visual dos vídeos codificados. / This thesis presents application-driven temperature-aware solutions for next generation video coding systems, such as the High Efficiency Video Coding (HEVC). Different from state-of-the-art works, the proposed solutions raise the abstraction of temperature management to the application-level, where video coding characteristics and video content properties are used to leverage thermal-aware solutions for video coding with low QoS (Quality of Service) degradation. Several video coding and temperature analyses are performed to understand the behavior of temperature when encoding different video sequences. Based on the analyses results, different approaches are proposed to mitigate the temperature effects on video coding systems. Application-driven temperature management for HEVC uses run-time encoder configuration selection to keep temperature under safe operational state while providing good visual quality results. Temperature optimization using approximate computing uses content-driven approximations to reduce the on-chip temperature of HEVC encoding. Application-driven temperature-aware scheduler leverages application-specific knowledge to guide a scheduling technique targeting reducing the spatial temperature gradients that are resulted from the unbalance workload nature of multi-threaded video coding application. The proposed solutions are able to provide up to 10 °C of chip temperature reduction with negligible compression efficiency loss. Besides, when compared with previous works the resulted objective video quality (PSNR) is from 12 dB up to 20 dB higher. Moreover, the proposed scheduler eliminates spatial temperature gradients greater than 5 ºC of multi-core architectures. As conclusion, this thesis demonstrates that leveraging application-specific knowledge and video content properties has a significant potential to improve temperature profiles of video coding systems while still keeping good quality results.

L'objectif principal de ce travail de thèse est la synthèse et l'étude des propriétés en solution de nouveaux copolymères amphiphiles di- et triblocks à gradient de styrène et d'acide acrylique qui sont capables d'association réversible en milieu aqueux. Nous avons étudié la cinétique et le mécanisme de la polymérisation radicalaire contrôlée par l’intermédiaire d’un nitroxyde (NMP), afin de déterminer les caractéristiques quantitatives des réactions de terminaison réversible lors de ce processus. Puis la NMP a été utilisée pour la synthèse de deux architectures différentes de copolymère à gradient: copolymères di- et triblocs. L'auto-assemblage des copolymères à gradient dans l'eau a été étudiée par DLS, SANS et TEM. Les changements réversibles du nombre d'agrégation au cours des cycles de pH ont été observés. De plus, nous avons étudié l'effet du pH et de la force ionique sur les propriétés rhéologiques en solution de copolymères triblocs à gradient. Nous nous sommes également intéressés à synthétiser des brosses de polymère sur surface d'or et étudié leur propriétés pH et électro-sensibles en milieu aqueux. / The main goal of our work was the synthesis and the study of solution properties of novel amphiphilic di- and triblock-gradient copolymers based on styrene and acrylic acid which are capable of reversible association in aqueous solution. We studied the kinetics and the mechanism of nitroxide-mediated radical polymerization (NMP) in order to determine the quantitative characteristics of the reversible termination reaction in this process. Then NMP was employed to the synthesis of two different block-gradient copolymer architectures: di- and triblock-gradient copolymers. The self-assembly of the block-gradient copolymers in water was studied by DLS, SANS and TEM. The reversible changes of aggregation numbers in cycles of pH were observed. We also investigated the effect of pH and ionic strength on rheological properties of triblock-gradient copolymer solution. Then, we synthesized polymer brushes on the gold-coated surface and studied their pH- and electro-responsive properties in aqueous media.

Les développements récents des techniques IRM engendre des sources de potentiels induits qui « polluent » les signaux électrophysiologiques, utilisé simultanément en IRM pour surveiller le patient et synchroniser les images. Le système élaboré dans ce travail est compose de deux modules « émetteur-récepteur » IRM-compatibles. Le premier permet d’introduire dans le tunnel d’IRM des signaux EPS dont on connait les caractéristiques. Les signaux sont injectés dans un tissu conducteur placé dans le tunnel. Le second module permet de recueillir les signaux après leur contamination par les artéfacts générés par les séquences d’imagerie. Il comporte 20 canaux répartis en quatre bandes fréquentielles (40, 80, 160 et 350 Hz). Des mesures du potentiel induit ont été réalisées en environnements 1,5 T et 3 T. Nous pouvons ainsi analyser les modifications des paramètres des signaux selon les séquences, mais aussi à l’intérieur des différentes bandes de fréquences. Dans ce travail, nous présentons une caractérisation et modélisation des potentiels induits par les commutations de gradients de champ magnétique recueilli par notre dispositif expérimental. La caractérisation et la modélisation permettent d’obtenir des informations pertinentes à prendre en compte pour l’élaboration des algorithmes de filtrage efficaces et robustes. / New developments in MRI techniques create sources of induced voltages that “pollute” the simultaneously acquired electrophysiological signals (EPS), used to monitor patients and/or synchronize images. We developed a device to allow a deep study of the contamination mechanism, which would assist in elaborating new tools to obtain higher quality EPS. The system consists of three main modules: (i) a signal transmission system composed of an EPS generator and a transmission box, which transmits the EPS to a MR-compatible receiver inside the tunnel, (ii) an electro-conductive tissue-mimicking phantom in which the EPS is injected, (iii) a signal collection module composed of a MR compatible amplifier-transmitter that emits, via an optical cable, the collected signal to a receiver box placed outside the MRI room. The receiver box comprises 20 channels distributed into four frequency bands (40, 80, 160, and 350 Hz). Measurements of the induced voltages were performed in 1.5 T and 3 T MRI environments. An algorithm to extract and analyze and model the induced voltages was developed. The modeling algorithm is based on a sinusoidal decomposition of the induced voltages. This work aimed to assess the disturbance level of the EPS, when using larger bandwidth amplifiers. The characterization and modeling of the induced voltages, which represent the dominant noise, reveal relevant information which can be used to develop robust and efficient noise reduction algorithms.

Submitted by Erika Demachki (erikademachki@gmail.com) on 2014-09-23T21:19:16Z No. of bitstreams: 2 Peixoto, Franciele Parreira-Dissertação-2013.pdf: 995120 bytes, checksum: 365969ffce47a58af2a011eb0370ed04 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Approved for entry into archive by Jaqueline Silva (jtas29@gmail.com) on 2014-09-23T21:58:54Z (GMT) No. of bitstreams: 2 Peixoto, Franciele Parreira-Dissertação-2013.pdf: 995120 bytes, checksum: 365969ffce47a58af2a011eb0370ed04 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) / Made available in DSpace on 2014-09-23T21:58:54Z (GMT). No. of bitstreams: 2 Peixoto, Franciele Parreira-Dissertação-2013.pdf: 995120 bytes, checksum: 365969ffce47a58af2a011eb0370ed04 (MD5) license_rdf: 23148 bytes, checksum: 9da0b6dfac957114c6a7714714b86306 (MD5) Previous issue date: 2013-03-18 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / Aim: To investigate global patterns of phylobetadiversity (PBD) in bats, with the purpose to better understand the mechanisms underlying current biodiversity patterns. We also aimed to use a metric that allows partitioning PBD into two components to distinguish the relative roles of local (e.g. lineage filtering) and regional processes (e.g. speciation) in shaping broad-scale patterns of PBD. Furthermore, we analyzed the distance-decay relationship of phylogenetic beta diversity to provide more information about factors that act in the PBD patterns. Location: global, delimited by biogeographic regions. Methods: Using the global distribution of bats and a supertree available for most species, we calculated PBD using the complement of phylosor index. We used a null model to test if two assemblages were more or less phylogenetically dissimilar than expected by chance. In addition, we decoupled PBD into turnover and nestednessresultant components, providing information about two factors that produce differences in assemblage phylogenetic composition. We also performed a Mantel analysis to analyze the distance-decay patterns of PBD and its two components. Results: The most striking difference in PBD was found between the Old and New World “phylogenetic composition”. We found the lowest values of PBD between adjacent regions (i.e., Neotropical/Neartic; Indo-Malay/Paleartic), revealing a strong geographical structure in PBD. These values were even lower when the turnover component was analyzed, demonstrating the differences in the role of regional processes in shaping regional diversity. On the other hand, we found out that for some adjacent regions (e.g., Afrotropical/Paleartic), the observed PBD was higher than expected by chance and comparatively different from expected by the distance decay relationship. This value remained high, even when we analyzed just the PBD turnover component. This demonstrates that although these regions are relatively close in space, there are other factors driving phylogenetic differences between them (e.g. an environmental barrier). Main conclusions: Our analyses revealed differences in the expected patterns of bat PBD among regions, suggesting that at broad scales, besides the effects of distance and geographic barriers, we also have to consider the importance of environmental gradients when studying the phylogenetic origin of bat assemblages. / A abordagem mais comum no uso de PD (diversidade filogenética) para conservação é selecionar locais com maior diversidade evolutiva. Essa estratégia parte do pressuposto de que locais com maior quantidade de PD indicam maior potencial para respostas evolutivas a mudanças ambientais futuras. No entanto, há um crescente debate sobre se as prioridades de conservação deveriam também ser voltadas para locais com baixo valor de PD, que podem representar centros de diversificação de espécies ou “berçários de diversidade”. Alguns trabalhos têm testado se os hotspots globais de biodiversidade, baseados em riqueza, também representam locais de desproporcional concentração de história evolutiva. Nós testamos aqui se os hotspots contêm mais, menos ou igual diversidade filogenética (PD) que o esperado por uma amostragem ao acaso de espécies em qualquer posição na filogenia, para a ordem Chiroptera. Buscamos responder qual a real contribuição de cada hotspot para a conservação de padrões e processos relacionados à diversidade filogenética. Nós utilizamos uma supertree disponível para a maioria das espécies da ordem, e dados de distribuição das espécies. Nós calculamos o PD para cada hotspot separadamente e utilizamos um modelo nulo para obter os valores esperados dado a riqueza. De 34 hotspots, apenas um apresentou maior PD do que o esperado, treze apresentaram valores menores e o restante valores iguais ao esperado. Nós demonstramos que a relação entre PD e riqueza varia entre regiões biogeográficas, de modo que não há como fazer generalizações acerca da contribuição dos hotspots para a conservação de diversidade evolutiva. De modo geral nossos resultados demonstram que devido ao fato da história evolutiva variar regionalmente, também devem ser estabelecidas as prioridades de conservação nessa escala.

Submitted by CARLA MARIA GOULART DE MORAES (carlagm) on 2015-05-07T14:18:15Z No. of bitstreams: 1 EriveltonTomazzoniGoncalves.pdf: 514129 bytes, checksum: 16d68cb85838c6e25971df9dbe3e7cf1 (MD5) / Made available in DSpace on 2015-05-07T14:18:15Z (GMT). No. of bitstreams: 1 EriveltonTomazzoniGoncalves.pdf: 514129 bytes, checksum: 16d68cb85838c6e25971df9dbe3e7cf1 (MD5) Previous issue date: 2011 / Nenhuma / A variação espacial da abundância das espécies pode ser determinada por uma série de causas históricas e ambientais. Visando a identificação de grupos florísticos e a sua relação com um conjunto de variáveis edáficas e climáticas (ambientais), do espaço geográfico (histórico) na estruturação da composição arbórea ao longo de formações ombrófilas e estacionais do extremo sul do bioma Mata Atlântica-Brasil, extraiu-se da literatura dados de composição e abundância da flora arbórea (Dap >9.5 cm), de 52 unidades amostrais com cerca de 1 ha de extensão. As comunidades foram caracterizadas através de sete variáveis climáticas, nove variáveis edáficas, três estruturais, além da diversidade Jost, altitude e suas coordenadas geográficas. Análises de ordenação foram empregadas para síntese dos descritores edafo-climáticos e características estruturais (PCA), na estruturação florística entre as parcelas (NMDS) e posterior correlação com os fatores ambientais. Através de análise de agrupamento hierárquico identificou-se grupos florísticos com utilização de espécies indicadoras, as quais foram classificadas quanto aos seus corredores migratórios. Com o uso do teste G, avaliou-se a independência das rotas históricas de dispersão com a composição das espécies indicadoras dos grupos florísticos. Fatores relacionados ao nicho das espécies, como a temperatura, precipitação total e secundariamente a drenagem, fertilidade e profundidade do solo são consistentes com a distribuição da composição arbórea. Do mesmo modo a longitude configurou-se um forte preditor desta variação florística formando um gradiente ao longo dos corredores de dispersão tropicais, bem como os grupos florísticos obtidos apresentaram espécies indicadoras dependentes dos seus contingentes de origem. Identificou-se um gradiente estrutural de variação de área basal, altura média e densidade entre Florestas Ombrófilas Mistas e Florestas Estacionais, ao contrário da diversidade. Os grupos florestais exibem diferentes graus de separação entre si. As Florestas Estacionais e a Floresta Ombrófila Densa formam um gradiente florístico contínuo ao longo de dois corredores migratórios de modo a consistir um bloco único. A Floresta Ombrófila Mista constitui um grupo dissimilar a estas formações com uma subdivisão marcada por espécies indicadoras exclusivas. Fatores ambientais e históricos são responsáveis tanto pela divisão entre grupos, que podem ser de forma abrupta ou gradativa, quanto pela diferenciação interna destas formações. / The spatial variation of species abundance can be determined by a series of historical and environmental causes. In order to identify floristic groups and their relationship to a set of soil and climatic variables (environmental), the geographic area (historical) in structuring the composition of trees along formations and seasonal rainforests from southern Atlantic forest, Brazil drew from the literature data on the composition and abundance of tree flora (DBH> 9.5 cm) of 52 sample units with about 1 ha in extension. The communities were characterized using seven climate, nine soil and three structural variables, as well as the Jost diversity, altitude and geographic coordinates. Ordination analysis were employed for the synthesis of soil, climatic and structural descriptors (PCA), the floristic structure between plots (NMDS) and subsequent correlation with environmental factors. Through hierarchical cluster analysis identified himself with floristic groups using indicator species, which were classified according to their migratory corridors. By using the G test, we evaluate the independence between the historic routes of dispersion and the composition of indicator species groups. Factors related to the niche of the species, such as temperature, total precipitation, and secondarily drainage, fertility and soil depth, are consistent with the distribution of the composition tree. Likewise the longitude is a strong predictor of floristic variation forming a gradient along the corridors of dispersal tropical flora, and the groups obtained were dependent indicator species of origin of their contingents Unlike the diversity, it was identified a structural gradient of basal area variation, average height and density between Araucaria forest and seasonal forests,. The forestry groups exhibit different degrees of separation between themselves. Seasonal forests and form a dense rain forest floristic gradient along two continuous migration corridors in order to consist a single block. The Araucaria forest is a group dissimilar to these formations with a subdivision marked by unique indicator species. Environmental and historical factors are responsible for both, the division between groups that may be abrupt or gradual, as well as the internal differentiation of these formations.