Optical manipulation of nanoscale objects is studied with particular emphasis on the role of plasmon resonance for enhancement of optical forces. The thesis provides an introduction to plasmon resonance and its role in confinement of light to a sub-diffraction volume. The strong light confinement and related enhancement of optical forces is then theoretically studied for a special case of nanoantenna supporting plasmon resonances. The calculation of optical forces, based on the Maxwell stress tensor approach, reveals relatively weak optical forces for incident powers that are used in typical realisations of trapping with nanoantenna. The optical forces are so weak that other non-optical effects should be considered to explain the observed trapping. These effects include heating induced convection, thermoporesis and chemical binding. The thesis also studies the optical effects of plasmon resonances for a fundamentally different application - size-based optical sorting of gold nanoparticles. Here, the plasmon resonances are not utilised for sub-diffraction light confinement but rather for their ability to increase the apparent cross-section of the particles for their respective resonant sizes. Exploiting these resonances, we realise sorting in a system of two counter-propagating evanescent waves, each at different wavelength that selectively guide gold nanoparticles of different sizes in opposite directions. The method is experimentally demonstrated for bidirectional sorting of gold nanoparticles of either 150 or 130 nm in diameter from those of 100 nm in diameter within a mixture. We conclude the thesis with a numerical study of the optimal beam-shape for optical sorting applications. The developed theoretical framework, based on the force optical eigenmode method, is able to find an illumination of the back-focal plane of the objective such that the force difference between nanoparticles of various sizes in the sample plane is maximised.

L’auto-assemblatge de molècules en nano- i micro-estructures és una àrea de gran interès, sent els lípids particularment atractius en la formació de diverses estructures incloent els liposomes. Hi ha un gran número de mètodes reportats en la literatura per a la preparació de liposomes, però els inconvenients que limiten l’ús generalitzat dels liposomes són; els passos de preparació que requereixen de molt de temps donant lloc a poblacions heterogènies de liposomes de mida incontrolable, l’ús de solvents orgànics i la necessitat de passos per a reduir la mida dels liposomes. Per tant; l’objectiu d’aquest doctorat és la optimització d’un mètode ultra-ràpid per a la preparació de liposomes en un sol pas i lliure de dissolvents orgànics. Anomenat “Curvature tuned preparation method” ha estat implementat en diverses formulacions lipídiques per a la formació de liposomes i d’altres superestructures de lípids. Aquestes estructures s’han emprat en diverses aplicacions, com ara en nanoreactors i plantilles per a la síntesis a mida de nanopartícules d’or, liposomes per encapsular enzims com a potenciadors de senyal en el desenvolupament de immunosensors i finalment, com a vehicles per l’alliberament controlat de fàrmacs. / The self-assembly of molecules into nano- or microstructures is an area of intense interest, with lipids being particularly attractive in the formation several structures including liposomes. There are numerous methods reported for the preparation of liposomes, however, time-consuming preparative steps resulting in heterogeneous liposome populations of incontrollable size, the use of organic solvents and the need of further size-reducing steps are the drawbacks limiting wide-spread use of liposomes. Therefore; the main concern of this PhD thesis is optimization of a one-step, organic solvent-free, ultra rapid method for the preparation of liposomes. So called “Curvature tuned preparation method” was later implemented in several lipid formulations which resulted in liposomes and other lipid superstructures. Those structures were further used in several applications, such as nanoreactors and templates for tailored synthesis of gold nanoparticles, enzyme encapsulating liposomes as signal enhancers in immunosensor development, and finally as carriers for controlled release of drugs

This thesis research investigates the surface properties and performances of gold nanoparticles, microarc oxidation coating, and epitaxial nano-twinned copper film. The research aims to understand the critical behavior of material surfaces in order to facilitate design and development of new materials for tribological applications. The research will focus on improving of the gun barrel performances. Experimental approaches will be used for combining analysis with basic thermal energy transfer principles. Results obtained here will be used for developing new materials to be used in facilitating gun barrels. Experimental approach includes scanning calorimetry-thremogravimetric analysis, tribological testing, and potentiodynamic polarization. The fundamental understanding obtained here will be beneficial for the gun barrel design, manufacturing, and military technologies followed by the results of experiments with different three types of materials. The results of this research showed that the coatings with microarc oxidation and nano-twinned structure improved wear resistance from the tribological examinations and size of AuNPs affected their thermal behaviors measured by differential scanning calorimetry and thermogravimetric analysis method.

<p>In this thesis, I present the electrochemical studies of three dendrimeric polypropylene imine (PPI) nanomaterials and their applications as a platform in the development of a novel label free DNA nanobiosensor based on electrochemical impedance spectroscopy. Cyclic voltammetry (CV), differentia pulse voltammetry (DPV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques were used to study and model the electrochemical reactivities of the nanomaterials on glassy carbon electrode (GCE) as the working electrode.</p>

Cancer is the second leading cause of death in the United States (more than half a million people each year), and even with billions of dollars in medical effort patients are rarely cured. This dissertation research is devoted to meeting this medical need by providing new cancer therapeutics that are more potent and safer than current chemotherapies. This is achieved by using two state of the art anticancer “warheads”: 1) gold nanoparticle (AuNP) technology and 2) a new class of epigenetic anticancer small molecules, histone deacetylase inhibitors (HDACi). These warheads are then selectively delivered to cancer cells via “homing devices” targeted to receptors that are overexpressed in the cancers. This work primarily focuses on the androgen receptor (AR) to target prostate cancer. The 1st chapter sets the stage, providing scientific rationale and background for the central hypothesis: small molecules that engage the AR can, upon conjugation to a therapeutic agent, enable selective delivery of that agent to prostate cancer cells. Chapter 2 delves into the structural molecular biology of the androgen receptor. There is a survey of the crystallographic data for all nuclear receptors, providing structural information which is used to build AR homology models for antagonist and inverse agonist modes of ligand binding. These models are used to design AR targeting ligands (Chapters 3, 5, 6 and 7). The application of the targeting technology is illustrated by attaching them to AuNPs for selective delivery to prostate cancer cells (Chapter 3). Next, in order to appreciate the importance of using targeting agents in HDACi cancer therapeutics, we reviewed this recently emerged field in Chapter 4. In this chapter we argue that the failure of HDACi in solid tumors, despite more than 500 clinical trials in the last decade, is primarily due to an inability of these small molecules to accumulate at effective concentrations in the cancer. We provide an analysis of the paradigms being pursued to overcome this barrier, including HDAC isoform selectivity, localized administration, and targeting cap groups to achieve selective tissue and cell type distribution. In Chapter 5, this last approach (targeting cap groups, or a “homing device”) is illustrated with HDACi targeted to prostate cancer via antiandrogens that bind the AR. The second generation of improved “homing devices” is disclosed in Chapter 6 (for both AuNPs and HDACi), in addition to preliminary ADMET data and safety studies in mice. Excitingly, our three dimensional understanding of binding to the AR allowed design and structure-activity-relationship studies that lead to the first reported examples of AR inverse agonists (Chapter 7) Several points of significance: • AuNP targeted to AR ∙ have the strongest binding affinity ever reported (IC50 ~14 picomolar) ∙ are actively recruited to prostate cancer cells ∙ overcome treatment resistance in advanced prostate cancer cells ∙ exhibit nanomolar anticancer potency ∙ resolved the identity of the “membrane AR” as the GPRC6A • HDACi targeted to AR ∙ have HDACi activity and AR binding affinity superior to their clinical precursors ∙ exhibit potent AR antagonist activity ∙ induce AR translocation to the nucleus in a HDACi dependent fashion ∙ selectively and potently kill prostate cancer cells that express AR ∙ are safer than Tylenol®, as tested in small animals • Pure AR binding ligand studies ∙ resulted in the discovery of the first examples of AR inverse agonists, which are vastly more potent that clinically available antiandrogens for prostate cancer ∙ work via a never-before-seen mechanism of action, by localizing to the nucleus and recruiting corepressors to actively shut off AR genes

The advent of numerous tools, ease of techniques, and concepts related to nanotechnology, in combination with functionalization via simple chemistry has made gold important for various biomedical applications. In this dissertation, the development and characterization of planar gold surfaces with responsive hydrogel patterns for rapid point of care sensing and the functionalization of gold nanoparticles for drug delivery are highlighted. Biomedical micro- and nanoscale devices that are spatially functionalized with intelligent hydrogels are typically fabricated using conventional UV-lithography. Herein, precise 3-D hydrogel patterns made up of temperature responsive crosslinked poly(N-isopropylacrylamide) over gold were synthesized. The XY control of the hydrogel was achieved using microcontact printing, while thickness control was achieved using atom transfer radical polymerization (ATRP). Atomic force microscopy analysis showed that to the ATRP reaction time governed the pattern growth. The temperature dependent swelling ratio was tailored by tuning the mesh size of the hydrogel. While nanopatterns exhibited a broad lower critical solution temperature (LCST) transition, surface roughness showed a sharp LCST transition. Quartz crystal microbalance with dissipation showed rapid response behavior of the thin films, which makes them applicable as functional components in biomedical devices. The easy synthesis, relative biocompatibility, inertness, and easy functionalization of gold nanoparticles (GNPs) have made them useful for various biomedical applications. Although ATRP can be successfully carried out over GNPs, the yield of stable solution based GNPs for biomedical applications prove to be low. As an alternative approach, a novel method of ISOlating, FUnctionalizing, and REleasing nanoparticles (ISOFURE) was proposed. Biodegradable poly(β-amino ester) hydrogels were used to synthesize ISOFURE-GNP composites. ATRP was performed inside the composite, and the final hydrogel coated GNPs were released via matrix degradation. Response analysis confirmed that the ISOFURE method led to the increased stability and yield of the hydrogel coated ISOFURE-GNPs. The ISOFURE protocol was also utilized in functionalizing GNPs with enzyme catalase in the absence of a stabilizing reagent. Biotin-streptavidin affinity was used as the bioconjugation method. Activity analysis of the conjugated enzyme showed that the ISOFURE-GNPs showed enhanced biomolecular loading relative to solution based stabilizing reagent passivated GNPs.

The feasibility of highly dispersed gold nanocatalyst supported on yttria-stabilized zirconia (YSZ) for the model reactions of C2H4 and CO oxidation is demonstrated for the first time. Gold nanoparticles are synthesized on YSZ powder by chemical reduction of the precursor salt in the mixture of ethanol, water and polyvinylpyrrolidone (PVP). Resulting metal loading of the catalysts are 1 wt.% with average particle sizes ranging from 6 to 9 nm. Results of CO and C2H4 oxidation display catalytic activity at 65 0C and 25 0C for CO and C2H4 oxidation, respectively. The catalytic properties of the catalysts are different due to their average particle size. Electrochemical Promotion of Catalysis (EPOC) of C2H4 oxidation is demonstrated. Application of constant potential difference between two electrodes in the bipolar electrochemical cell led to increase in C2H4 conversion. A proposed mechanism explains the bipolar EPOC phenomenon through formation of O2- flux across the electrochemical cell, resulting in the change of Work Function of gold nanoparticles placed in between the electrodes and is electronically isolated.

Nanoparticle-functionalized electrodes have attracted attention in areas such as energy production and storage, sensing, and electrosynthesis. The electrochemical properties of these electrodes depend upon the nanoparticle properties, e.g., core size, core morphology, surface chemistry, as well as the structure of the nanoparticle/electrode interface, including the coverage on the electrode surface, choice of electrode support, and the interface between the nanoparticle and the electrode support. Traditionally used methods of producing nanoparticle-functionalized electrodes lack sufficient control over many of these variables, particularly the nanoparticle/electrode interface. Tethering nanoparticles to electrodes with molecular linkers is a strategy to fabricate nanoparticle-functionalized electrodes that provides enhanced control over the nanoparticle/electrode structure. However, many existing tethering methods are done on catalytically active electrode supports, which makes isolating the electrochemical activity of the nanoparticle challenging. Furthermore, previous work has focused on larger nanoparticles, yet smaller nanoparticles with core diameters less than 2.5 nm are of interest due to their unique structural and electronic properties. This dissertation addresses both of these gaps, exploring small nanoparticle electrocatalysts that are molecularly tethered to catalytically inert electrodes. This dissertation first reviews and compares the methods of fabricating nanoparticle-functionalized electrodes with a defined molecular interface in the context of relevant attributes for electrochemical applications. Next, a new platform approach to bind small gold nanoparticles to catalytically inert boron doped diamond electrodes through a defined molecular interface is described, and the influence of the nanoparticle/electrode interface on the electron transfer properties of these materials is evaluated. The next two studies build upon this platform to evaluate molecularly tethered nanoparticles as oxygen electroreduction catalysts. The first of these two describes the systematic study of atomically precise small gold clusters, highlighting the influence of atomic level differences in the core size and the electrode support material on the catalytic properties. The second study extends the platform approach to study small bimetallic silver-gold nanoparticles produced on the electrode surface and highlights the influence of the structural arrangement of the metals on the catalytic activity. Finally, future opportunities for the field of molecularly tethered nanoparticle-functionalized electrodes are discussed. This dissertation includes previously published and unpublished co-authored material. / 2019-01-27

Philosophiae Doctor - PhD / In this thesis, I present the electrochemical studies of three dendrimeric polypropylene imine (PPI) nanomaterials and their applications as a platform in the development of a novel label free DNA nanobiosensor based on electrochemical impedance spectroscopy. Cyclic voltammetry (CV), differentia pulse voltammetry (DPV), square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques were used to study and model the electrochemical reactivities of the nanomaterials on glassy carbon electrode (GCE) as the working electrode. / South Africa

Este trabalho apresenta estudos sobre a síntese química do PEDOT com o objetivo de desenvolver diferentes arquiteturas e propriedades para melhorar a taxa de degradabilidade deste polímero. As estratégias foram as preparações de uma blenda, um copolímero e um nanocompósito. O estudo foi iniciado pela síntese química oxidativa do PEDOT (poli (3,4- etilenodioxitiofeno)) em microestruturas utilizando condições brandas e ambientalmente amigáveis, porém o material obtido não apresentou solubilidade e boas condições de se produzir um filme. Então foi sintetizado quimicamente o PEDOT dopado com PSS (poli estireno sulfonado) (PEDOT:PSS), o mesmo foi usado para preparar blendas com o PLGA (poli (ácido láctico-co-glicólico), para melhorar sua degradabilidade. Foi possível produzir um filme fino e nanoestruturado através de deposição eletrostática camada por camada (LBL) que pode ser utilizado para modificação de eletrodos ou de suportes tridimensionais para engenharia celular. Para garantir a degradabilidade do material, foi realizada a síntese de copolímeros de PEDOT e PLLA (poli(lactídeo)) em que foi variada a proporção de PEDOT na cadeia polimérica. Os copolímeros foram caracterizados por IV, RMN, UV, análises térmicas e submetidos a testes de degradabilidade e de viabilidade celular, apresentando excelentes resultados. Foi possível a obtenção de microfibras deste material. A outra alternativa estudada foi a síntese de um nanocompósito, preparado através da síntese química do PEDOT, partindo do monômero EDOT (3,4- etilenodioxitiofeno)usando HAuCl4 como oxidante e NaPSS como dopante e dispersante. O nanocompósito obtido foi caracterizado apresentando diâmetros médio próximos de 4 nm e com uma estrutura caroço-casca, apresentando nanopartícula de ouro como caroço e o polímero PEDOT:PSS como casca. Foram obtidos filmes deste material por deposição por evaporação de solvente, LBL, utilizando como policátion o PDDA (cloreto de poli (dialil dimetil amônio)) e quitosana, e por deposição eletroforética, que apresentou excelentes propriedades eletrocrômicas como rápidos tempos de respostas com bons contrastes ópticos / This work presents studies about the chemical synthesis of PEDOT (Poly(3,4-ethylenedioxythiophene)) with the aim of preparing different architectures and properties to improvement the degradability rate of this polymer. The strategies used to achieve this pupose were the preparation of polymer blends, copolymers and nanocomposites. The study was started by the chemical synthesis of microstructures PEDOT in mild and environment friendly conditions, but the material did not show solubility which enable film formation. Then, PEDOT was synthetized by chemical synthesis doped with PSS (poly(styrene sulfonic acid)), (PEDOT:PSS) to prepare blends with PLGA (poly(lactic-co-glycolic acid)) to improve its degradability. It was possible to prepare a thin and nanostructured film, by electrostatic layer-by-layer deposition (LBL), which could be used for electrodes or scaffold surface modification. In order to ensure the material\'s degradability, PEDOT and PLLA (poly(lactide)) copolymers were prepared, changing PEDOT proportion in the polymeric structure. The copolymers were characterized by, IR, NMR, UV, thermal analysis and then degradability and cell viability tests, which shown important results. Fibers were able to be obtained with these materials. The next strategy was the preparation of a nanocomposite by one-spot chemical synthesis, initiated by the monomer EDOT (3,4- ethylenedioxythiophene) using HAuCl4 as oxidant and NaPSS as both dopant and dispersant. The nanocomposite obtained was characterized showing diameter of around 4nm and a core-shell structure, with gold nanoparticle as core and PEDOT:PSS as the shell. Films were obtained by this material by casting, by LBL, using PDDA (Poly(diallyldimethylammonium) chloride) and chitosan as polycations, and by electrophoretic deposition. The latter method shows excellent characteristics as fast response time with a good optical contrast