No description available.

Parkinson's disease (PD) is a neurodegenerative condition that affects millions of people worldwide. The exact etiology of PD is unknown. However, it is well established that environmental factors contribute to the onset of PD. In particular, chemicals such as the insecticide Rotenone have been shown to increase the death of dopaminergic (DA) neurons by increasing levels of reactive oxygen species (ROS). ROS such as hydrogen peroxide (H2O2) have been shown to be elevated above basal levels in PD patients. Currently, to measure H2O2 concentrations, a commercially available (Amplex® Red) fluorescent assay is used. However, the assay has limitations: it is not completely specific to hydrogen peroxide and can only measure extracellular ROS concentrations. This research focuses on testing an electrochemical sensor that uses cyclic voltammetry to quantitatively determine concentrations of H2O2 released from a cell culture. The sensor was first tested in normal cell culture conditions. Next, chemical interference was reduced and the sensor was optimized for accuracy by altering protein concentrations in the media. Finally, Rotenone was added to a cell culture to induce H2O2 production. Near real-time measurements of H2O2 were taken using the sensor and comparisons made to the fluorescent assay method. Overall, we are trying to determine if the electrochemical sensor can selectively and quantitatively measure H2O2 released from cells. Being able to track the production, migration and concentration of H2O2 in a cell can help researchers better understand its mechanism of action in cell death and oxidative damage, thus getting closer to finding a cure for PD.

Chemical-mechanical Planarization (CMP) has emerged as one of the fastest-growing processes in the semiconductor manufacturing industry, and it is expected to show equally explosive growth in the future (Braun, 2001). The development of CMP has been fueled by the introduction of copper interconnects in microelectronic devices. Other novel applications of CMP include the fabrications of microelectromechanical systems (MEMS), advanced displays, three dimensional systems, and so on (Evans, 2002). CMP is expected to play a key role in the next-generation micro- and nanofabrication technologies (Singh, et al., 2002). Despite the rapid increase in CMP applications, the fundamental understanding of the CMP process has been lacking, particularly the understanding of the wafer-slurry-pad interactions that occur during the CMP process. Novel applications of CMP are expected to expand to materials that are complex chemically and fragile mechanically. Thus, fundamental understanding and improvement of slurry design for CMP is the key to the development of sophisticated next-generation CMP processes. Slurry performance for CMP can be determined by several output parameters including removal rate, global planarity, surface topography, and surface defectivity. To achieve global planarity, it is essential to form a very thin passivating surface layer ( < 2 nm) that is subsequently removed by the mechanical component of the slurry (Kaufman et al., 1991) or by combined chemo-mechanical effects (Tamboli, 2000). Chemical additives like hydrogen peroxide (H2O2), potassium ferricyanide, and ferric chloride are added to slurries as oxidizers in order to form a desirable surface layer. Other chemical additives such as inhibitors (e.g. benzotriazole) and complexing agents (e.g. ammonia) are added to the copper slurry in order to modify the oxide layer. That the removal rate of the thin surface layer is greater at the highest regions of the wafer surface than at the lowest regions leads to surface planarity. In this study, various complexing agents and inhibitors are combined to form slurry chemistry for copper CMP processing in H2O2 based slurries at pH values ranging from 2 to 10. Two complexing agents (glycine and Ethylenediamine) and one inhibitor (3-amino-1, 2, 4-triazole) were selected as slurry constituents for detailed chemical synergistic effect study because they showed good materials removal and surface planarity performances. To understand the fundamental mechanisms involved in copper CMP process with the afore-mentioned slurry chemical formations, various techniques, such as electrochemical testing techniques (including potentiodynamic polarization and electrochemical impedance spectroscopy), x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and scanning electron microscopy (SEM), were applied. As a result, guidelines for optimized slurry chemical formulation were arrived at and the possible mechanisms of surface-chemical-abrasive interactions were determined. From applications point of view, this study serves as a guide for further investigations in pursuing highly effective slurry formulations for copper/low-k interconnect applications.

Glutathione (GSH) is a small antioxidant in the body and exists in large quantities compared to other antioxidants. The GSH redox state (Eh) helps developmental processes, however, when the GSH Eh is disrupted, cells may undergo significantly poor developmental pathways, possibly leading to long-lasting damages. Similarly, NADPH and Thioredoxin redox states can have a major impact on cellular function, viability, and response to both endogenous and exogenous toxicants. Subcellular, compartmentalized redox environments during normal or perturbed situations, specifically in the cytosol, mitochondria, and nucleus, are not well understood. Here, using the P19 neurogenesis model of cellular differentiation, the kinetics of subcellular H2O2 availability and GSH/GSSG and NADPH/NADP+ redox shifts were evaluated following oxidant exposure. Additionally, modified mouse embryonic fibroblasts (MEFs) were used to observe redox changes and protective mechanisms when major antioxidative pathways are inhibited, mainly those involving the GSH/GSSG and Trxred/Trxox pathways. Overall, treated undifferentiated cells showed a greater degree and duration of both H2O2 availability and GSH/GSSG and NADPH/NADP+ disruption throughout all compartments than differentiated neurons. Pretreatment with an Nrf2 inducer prevented H2O2-induced effects in all compartments of undifferentiated cells. Additionally, MEF cells without either GSH or Trx showed a greater degree and duration of GSH/GSSG and Trxred/Trxox disruption throughout the cytosol and nucleus when compared to normal functioning cells. Disruption of redox-sensitive developmental pathways is likely stage-specific, where cells that are less differentiated and/or are actively differentiating are most affected. Undifferentiated cells are more susceptible to oxidant-induced redox dysregulation but are protected through prior Nrf2 induction, which appears to preserve developmental programs and diminish the potential for poor developmental outcomes. The GSH and Trx antioxidant pathways converge to protect the cell, while cells that are missing one pathway or the other may undergo damaging developmental outcomes.

No description available.

Στην παρούσα διπλωματική εργασία γίνεται χρήση λεπτών υμενίων TiO2 ως στερεό υπόστρωμα για την ακινητοποίηση πρωτεϊνών με απώτερο σκοπό την ανάπτυξη ενός αμπερομετρικού βιοαισθητήρα με ευαισθησία στο υπεροξείδιο του υδρογόνου (H2O2). Αρχικά περιγράφεται η λειτουργία των βιοαισθητήρων καθώς και οι σημαντικότεροι τύποι βιοαισθητήρων που έχουν κατασκευαστεί μέχρι σήμερα. Σημαντικό ρόλο στην επιτυχή κατασκευή ενός βιοαισθητήρα παίζει η επιλογή του υλικού που θα χρησιμοποιηθεί ως υπόστρωμα / ηλεκτρόδιο (υμένια TiO2) καθώς και ο τρόπος που ακινητοποιείται το βιομόριο πάνω σε αυτό, γι’ αυτό και έχει δοθεί έμφαση στην ανάλυση των παραπάνω πληροφοριών. Επίσης περιγράφεται η δομή και η φυσική λειτουργία της πρωτεΐνης, (κυτόχρωμα c), που χρησιμοποιήθηκε ως το βιομόριο επιλογής για την ανάπτυξη του βιοαισθητήρα. Αναλύθηκαν επίσης οι κρυσταλλικές δομές του διοξειδίου του τιτανίου, οι βασικές φυσικοχημικές τους ιδιότητες και οι λόγοι που επιλέξαμε την ανατάση για τη συγκεκριμένη εργασία. Περιγράφεται η πειραματική διαδικασία εναπόθεσης των υμενίων του TiO2 σε υποστρώματα αγώγιμου υάλου. Στη συνέχεια περιγράφονται οι πειραματικές διατάξεις που χρησιμοποιήθηκαν τόσο για τον χαρακτηρισμό των υμενίων διοξειδίου του τιτανίου (TiO2) όσο και για την αναλυτική μελέτη της ακινητοποίησης του κυτοχρώματος c πάνω σε αυτά. Τέλος περιγράφεται η ηλεκτροχημική κυψελίδα 3 ηλεκτροδίων και η τεχνική της κυκλικής βολταμετρίας που επιλέχθηκαν τόσο για τη μελέτη των ηλεκτροχημικών ιδιοτήτων των υμενίων TiO2 με ή χωρίς ακινητοποιημένη πρωτεΐνη όσο και για την ανάπτυξη ενός αμπερομετρικού βιοαισθητήρα με ευαισθησία στο H2O2. / In the present study, the use of thin nanocrystalline TiO2 films as solid substrates for protein immobilization and for the development of an electrochemical biosensor for hydrogen peroxide (H2O2) are investigated. First of all, a general description of biosensors and their most important types that have been developed to date is given. For the successful development of a biosensor, the choice of material/substrate used as the surface/electrode (thin film of TiO2) for the attachment of the bio-molecule of interest, as well as the manner in which the bio-molecule is immobilized upon it are critical and therefore emphasis is given for the analysis of this information. Furthermore, a description of the structure and basic functions of the bio-molecules (cytochrome c and hemoglobin), used for the immobilization studies and for the development of the biosensor is presented. Additionally, the crystalline structures of titanium dioxide have been analyzed, along with its basic physicochemical properties and the reasons for choosing its anatase structure for the specific project. In the experimental part, the deposition of the colloidal TiO2 paste on conducting glass for the preparation of the thin mesoporous TiO2 films is described in detail. Also described are the experimental techniques used for the characterization of these films as well as a thorough analysis of the binding of cytochrome c upon them and the parameters that influence its adsorption. Finally, description of the 3-elecrode electrochemical cell used in this study of perform of cyclic voltammetry experiments in order to investigate the electrochemical properties of the TiO2 thin films with or without immobilized protein is given. The same setup is also used for the development of an electrochemical biosensor for H2O2.

Le stress oxydant est un acteur clé dans les réponses des plantes à des conditions contraignantes. En raison de la complexité de la régulation de l’état redox cellulaire, il reste beaucoup à élucider concernant les interactions entre différentes composantes dans ces conditions. Grâce à une approche de génétique inverse basée sur un mutant d’Arabidopsis déficient en catalase (cat2) qui présente des modifications d’état redox prévisibles et bien définies, cette étude a exploré les interactions entre le stress oxydant et (1) un gène spécifique impliqué dans la déphosphorylation des protéines, (2) des enzymes spécifiques impliquées dans les systèmes antioxydants réducteurs. Les résultats obtenus révèlent que la sous-unité B'γ de la protéine phosphatase de type 2A (PP2A-B'γ) est importante dans la détermination des phénotypes et des réponses de défense photopériode-dépendantes chez cat2. En conditions de jours courts (SD), un double cat2 pp2a-b'γ mutant montrait une gamme de réponses qui n’étaient pas observées chez cat2. Ces effets comprenaient l’apparition de lésions ainsi que l’accumulation de l’acide salicylique et d’autres composés de défense. Des analyses métabolomiques et protéomiques ont permis de démontrer que ces effets étaient accompagnés de modifications de l’abondance de métabolites et protéines spécifiques, ainsi que des changements dans le statut de phosphorylation de certains polypeptides. Dans un deuxième volet du travail, l’importance d’une enzyme productrice du NADPH a été évaluée en produisant des doubles cat2 nadp-me2 mutants chez lesquels l’isoforme majeure de l’enzyme malique cytosolique n’est plus exprimée. Malgré une induction de cette enzyme par le stress oxydant aux niveaux de transcrits et d’activité, et une diminution importante de l’activité foliaire associée aux mutations nadp-me2, peu de différence a été observée entre les lignées cat2 et cat2 nadp-me2. De même, la mutation nadp-me2 n’a pas affecté la réponse phénotypique de plantes exposées à l’ozone. Dans la troisième partie du travail, le couplage entre les pools ascorbate et glutathion lors du stress oxydant a été exploré par l’introduction de mutations pour la déshydroascorbate réductase (DHAR) dans le fond génétique cat2. L’activité extractible de cette enzyme a été diminuée à des niveaux très faibles chez des lignées portant à la fois les mutations dhar1 et dhar3. Cependant, peu de différence a été observée dans les phénotypes et les statuts d’ascorbate et de glutathion chez un triple mutant cat2 dhar1 dhar3 par rapport à cat2. Des analyses préliminaires d’un quadruple cat2 dhar1 dhar2 dhar3 mutant semblent pourtant indiquer que les trois DHARs jouent des rôles fonctionnellement redondants dans le stress oxydant. Dans son ensemble, ces travaux apportent des données nouvelles sur les enzymes qui régulent les réponses aux stress oxydants et ont généré des outils intéressants pour des études ultérieures. / Oxidative stress is a key player in plant responses to challenging environmental conditions. The intricate nature of the regulation of cellular redox state means that much remains to be elucidated on interactions between different components in these conditions. By using a genetic approach based on a catalase-deficient Arabidopsis mutant (cat2) that presents well-defined, predictable changes in redox state, this study explored interactions between oxidative stress and (1) a specific gene involved in protein dephosphorylation, and (2) specific enzymes involved in the antioxidative/reducing system. The results showed that protein phosphatase 2 subunit B'γ (PP2A-B'γ) is involved in determining day length-dependent phenotypes and related defense responses in cat2. A cat2 pp2A-B'γ double mutant showed a range of responses that were not observed in cat2 grown in short days, including lesion formation and accumulation of salicylic acid (SA) and related metabolites. Metabolomics and proteomics analyses showed that these effects were associated with altered abundance of specific metabolites and proteins, as well as changes in protein phosphorylation status. A second part of the study investigated the importance of NADP-generating enzymes in oxidative stress by production of cat2 nadp-me2 double mutants, in which the cytosolic isoform of NADP-malic enzyme is knocked out. Although NADP-ME2 was shown to be induced by oxidative stress, and mutants for this gene had much decreased leaf NADP-malic enzyme activity, no effects on cat2 phenotypes or redox profiles were apparent. Similarly, phenotypic responses to ozone were not affected in an nadp-me2 single mutant. In the third part, coupling between ascorbate and glutathione pools during oxidative stress was investigated by introduction of loss of function mutations for dehydroascorbate reductase (DHAR) into the cat2 background. In lines carrying a combination of dhar1 and dhar3 mutations, extractable leaf activity was decreased to very low levels. Despite this, cat2 dhar1 dhar3 and cat2 phenotypes and ascorbate and glutathione pools were similar. However, preliminary functional analysis of a cat2 dhar1 dhar2 dhar3 quadruple mutant suggested that the three DHARs play functionally redundant roles in oxidative stress. Overall, the work provides new data on enzymes that regulate responses to oxidative stress and has produced interesting genetic tools for further study.

Au cours de l’évolution, les plantes ont développé des mécanismes pour percevoir et s'adapter aux conditions de stress. Les formes actives de l'oxygène (FAO) sont des facteurs importants de l'état redox cellulaire et sont impliquées dans ces réponses. Le peroxyde d'hydrogène (H2O2), une FAO majeure des voies de signalisation oxydative, peut être produit rapidement dans la photorespiration. Chez Arabidopsis, le H2O2 produit dans la photorespiration est métabolisé notamment par la CATALASE2 (CAT2). Dans le contexte du mutant cat2 déficient pour cette catalase, les réponses au stress oxydatif induit par la production conditionnelle du H2O2 sont fortement dépendante de la photopériode. En particulier, la formation de lésions, accompagnée de réponses similaires à celles d' attaques pathogènes, sont spécifiques des conditions de culture en jours longs (JL). Ces effets ne sont pas observés en jours courts (JC) malgré un stress oxydant qui semble être aussi prononcé qu’en JL. Une approche transcriptomique globale a été utilisée pour explorer les patterns d’expression génique associées à ces effets. Elle a permis de mettre en évidence des interactions entre photopériode et H2O2 ou entre photopériode et CO2. En particulier, la majorité des gènes répondant à l' H2O2 dans le mutant cat2 sont induits lorsque les plantes sont cultivées en JC alors que un plus petit nombre sont induits par l’ H2O2 spécifiquement en JL. De façon générale, ces analyses ont mis en évidence des relations étroites entre les ressources carbonées, la lumière et l'état redox cellulaire dans les réponses aux changements environnementaux. Un gène induit par le H2O2 spécifiquement en JL, l’AZELAIC ACID INDUCED 1 (AZI1), a été sélectionné pour des analyses fonctionnelles à l’aide d’approches génétique, biochimique et transcriptomique. L’analyse de mutants cat2 azi1 a révélé que AZI1 ne semble pas jouer un rôle majeur dans les réponses des plantes à un stress oxydatif durable. Cependant, ce gène semble jouer un rôle important lorsque le stress oxydatif est déclenchée de façon abrupte par le transfert des plantes de conditions de culture en fort CO2 vers l'air ambiant. De plus, cette étude montre que la communication de feuille à feuille est impliquée dans la régulation de l'expansion de la mort cellulaire en réponse a l'H2O2 issue de la photorespiration. Dans la régulation de l'expansion des lésions, nous proposons que AZI1 agirait d'une part localement pour induire la mort cellulaire et d'autre en inhibant la mort cellulaire d'une façon systémique. Dans des fonds génétiques sauvage Col-0 ou mutant cat2, l’analyse comparative de mutants d'insertion ADN-T pour les principaux photochromes (phyA , phyB) et cryptochromes (cry1, cry2) a permis d'étudier les interactions entre les stress et les fonctions des photorécepteurs. Il est apparu que, la mutation des gènes PHY comme CRY conduit a une stimulation de l’accumulation de glutathion H2O2 dépendante. En revanche, dans le fond génétique cat2 contrairement à la perte des fonctions PHY, la mutation des gènes cry conduit a une modulation du profil transcritomique induit par l’ H2O2. De plus, un criblage de conditions de stress sur les simples mutants cry a révélé une plus forte sensibilité de ces génotypes au stress osmotique, a l’ H2O2 et au paraquat. Globalement, ces données indiquent que l’ensemble des photorécepteurs et plus particulièrement les cryptochromes peuvent jouer un rôle dans la réponse à l’ H2O2 intracellulaire suggérant ainsi l’existence d’un réseau complexe permettant l’intégration de conditions environnementales et la détermination de réponses appropriées au stress. / During evolution, plants have developed mechanisms to perceive and respond to stress conditions. Reactive oxygen species (ROS) are important components of cell redox state that have been implicated in these responses. H2O2, an important ROS molecule in oxidative signalling, can be produced rapidly in photorespiration. In Arabidopsis, photorespiratory H2O2 is notably metabolized by CATALASE2 (CAT2). Responses to oxidative stress induced conditionally by photorespiratory H2O2 in the catalase-deficient mutant, cat2, are highly determined by growth daylength. In particular, lesion formation, accompanied by induction of a range of pathogenesis responses, is specific to the long day (LD) photoperiod: these responses are not observed in short days (SD), even though oxidative stress seems to be as marked as in LD. A whole-genome transcriptomics approach was used to explore gene expression patterns underlying these effects, and identified interactions between daylength and H2O2 and between daylength and CO2. In particular, the majority of H2O2-responsive genes in cat2 were up-regulated more strongly in SD air, though a subset of H2O2-induced genes showed a LD-specific response. Overall, this analysis indicates close networking between carbon status, light, and redox state in environmental responses. The most strongly H2O2-induced gene in LD was azelaic acid induced 1 (AZI1) and this gene was chosen for functional analysis using a genetic, biochemical and transcript profiling approach. Analysis of cat2 azi1 mutants revealed that AZI1 does not seem to play an important role in the plant response to sustained, continuous oxidative stress, but is influential when oxidative stress is abruptly induced, in this case, by transferring plants from high CO2 to air. Moreover, this study provided evidence that leaf-to-leaf communication is involved in regulating cell death spread in response to photorespiratory H2O2. In the regulation of this lesion spread, it is proposed that AZI1 acts both locally to promote cell death as well as systemically to inhibit it. Using a comparative analysis of T-DNA insertion mutants for the major phytochromes (phyA, phyB) and cryptochromes (cry1, cry2) introduced into the Col-0 or cat2 background, interactions between stress and photoreceptor function were analyzed. A stimulatory effect of both phy and cry mutations on H2O2-triggered glutathione accumulation was apparent. In contrast to loss of PHY function, both cry mutations modulated daylength-dependent H2O2-triggered transcriptome profiles in cat2. In addition, stress screening of single cry mutants revealed effects on osmotic, H2O2 and paraquat sensitivity. Overall, these data show that both kinds of photoreceptor, but particularly cryptochromes, can play a role in the response to intracellular H2O2, suggesting that there is an intricate network allowing integration of environmental information to determine appropriate responses to stress.

Dans un contexte de raréfaction de la ressource en eau, le traitement des eaux usées peut permettre de constituer des réserves d’eau durables et valorisables pour des usages variés tels que l’irrigation des cultures, la recharge de nappe phréatique ou encore une utilisation directe par les industries grandes consommatrices d’eau (cimenterie, aciéries…). Ainsi, la nécessité d’améliorer le traitement des eaux usées en sortie de STEU devient primordial afin d’assurer une qualité chimique et microbiologique de l’eau compatible avec sa réutilisation. Le traitement des micropolluants constitue notamment un nouveau défi pour les STEU. Si des projets de recyclage des eaux usées émergent pour les grandes STEU, le potentiel des petites ou moyennes STEU, qui constituent près de 90% des installations en France, reste inexploité à l’heure actuelle. Pour y remédier, les procédés d’oxydation avancée, notamment ceux basés sur l’UV, se présentent comme des solutions de traitement prometteuses. L’objectif de cette étude est de démontrer que la technologie UV/H2O2 est efficace et économiquement réaliste pour la désinfection et l’élimination des micropolluants organiques dans ces petites et moyennes STEU. Dans une première phase, un pilote de laboratoire UV/H2O2 a été évalué en conditions réelles (débit, matrice) sur des modèles bactériens et sur des micropolluants estrogéniques (E1, E2 et EE2) dans les eaux usées traitées d’une STEU. L’efficacité du traitement est comparée à celle de la photolyse seule. Il a été montré que le traitement UV/H2O2 permet une amélioration de la désinfection en assurant une destruction des bactéries contrairement à la photolyse seule qui ne fait qu’inactiver les micro-organismes. D’autre part, les doses UV (plus petit 600 mJ/cm²) et les concentrations en H2O2 étudiées (30-50 mg/L d’H2O2) permettent d’abattre plus de 80% de l’ensemble des micropolluants ciblés et de l’activité biologique (estrogénicité) associée, sans former de sous-produits estrogéniques ou toxiques au regard des tests d’activité employés dans l’étude (YES et Vibrio Fisheri). Parallèlement, il a été montré que le procédé UV/H2O2 est également efficace pour éliminer plus de 70% des produits pharmaceutiques (diclofénac, ibuprofène et naproxène) à 1000 mJ/cm². Sur la base des paramètres de traitement établis en pilote de laboratoire, un prototype a été dimensionné pour la STEU de Vercia (filtre planté de roseaux, 1100 EH, Jura). Les conditions de traitement mises en œuvre (dose UV plus pertit 1000 mJ/cm², [H2O2] = 15 mg/L) ont permis d’obtenir une eau de très haute qualité bactériologique et des abattements des micropolluants suivis supérieurs à 90%. Cette expérimentation à échelle réelle a permis d’estimer le coût global de cette technologie à environ 0,28 €/m³. L’ensemble de ce travail de recherche conclue à l’efficacité et au fort potentiel de la technologie UV/H2O2 pour le recyclage des eaux usées traitées des petites et moyennes STEU. / Water scarcity is a growing concern worldwide. In this context, treated wastewater is seen as a sustainable water resource which could be used for different purposes such as irrigation, groundwater recharge or industrial activities. Reclaimed water is an environmentally and economically solution, still poorly developed in France. However, an increasing demand is expected in the coming years. Therefore, treatment enhancement in wastewater treatment plant could be necessary in order to meet chemical and biological water quality requirements which will depend on the final use of the treated water. The treatment of emerging micropollutants is one of the new challenge WTP will have to cope with. Enhanced treatment processes (ozonation, activated carbon, membrane filtration) have already been set up in large WTP but small and medium WTP, representing around 90% of the French WTP, are still lacking of affordable treatment solutions. However, UV based advanced oxidation process (AOP) could be a promising technology in order to produce a water of high quality. The aim of this study is to demonstrate that UV/H2O2 process is technically and economically efficient for the disinfection and the removal of micropollutants in small and medium WTP. First of all, a UV/H2O2 pilot at a laboratory scale was assessed on bacterial models as well as estrogenic micropollutants (E1, E2 and EE2) in treated wastewater. Treatment efficiency was compared to UV photolysis. It was shown that UV/H2O2 treatment increased the disinfection process by destroying the cellular membrane integrity whereas the UV photolysis could only inactive the bacteria. Moreover, when combining UV (plus petit 600 mJ/cm²) and H2O2 (30-50 mg/L), above 80% of the estrogenic compounds and the associated estrogenic activity could be removed. No high estrogenic or toxic by-products were detected by the two bioassays used in this study (YES and vibrio fisheri). The UV/H2O2 process could also degrade pharmaceuticals such as diclofenac, ibuprofen and naproxen (>70 % at 1000 mJ/cm²). In a second part, a full scale pilot was designed based on the previous results and set up in a WTP in Vercia (Jura). The treatment (UV fluence ≈ 1000 mJ/cm², [H2O2] = 15 mg/L) allowed to obtain a water of a very high bacteriological and chemical quality. The global cost of the process was estimated at around 0.28 €/m³. This study demonstrates the efficiency of the UV/H2O2 process in a small WTP and its high potential for reclaimed water production

A racionalização dos recursos hídricos tem sido uma das metas das indústrias em vários setores. Tais metas exigem inovações tecnológicas tanto para novos processos produtivos quanto para novas técnicas de tratamento e reutilização de água na cadeia de produção. Os custos elevados de água industrial no Brasil, particularmente nas regiões metropolitanas, têm estimulado as indústrias nacionais a avaliar as possibilidades de reúso. O objetivo deste trabalho é a aplicação do tratamento de águas de processo contendo polipropileno utilizando radiação ultravioleta e peróxido de hidrogênio, isto é, o sistema UV/H2O2, visando adequá-las para reúso no próprio processo, reduzindo a necessidade de captação de água pré-tratada e de descarte de efluente. A primeira parte do estudo consistiu na realização de experimentos em um sistema fotoquímico de batelada, empregando quatro diferentes correntes efluentes de processo, para a avaliação da viabilidade técnico-econômica do tratamento fotoquímico, bem como para a obtenção de dados referentes à cinética das reações fotoquímicas. Com base nas informações obtidas, na segunda parte do estudo foram realizados experimentos em um sistema fotoquímico contínuo, a fim de obter dados para o aumento de escala para aplicação industrial do processo de tratamento contínuo. Os resultados experimentais indicaram a viabilidade técnica de aplicação do sistema UV/H2O2 utilizando fonte de luz artificial para todas as correntes de processo estudadas, tendo sido alcançados níveis de remoção de matéria orgânica acima de 90%. No entanto, sob o ponto de vista econômico, apenas as correntes com baixo teor de carbono orgânico total dissolvido (COT), entre 6 e 12 mgC L-1, mostraram-se adequadas ao reúso, após o tratamento. / Rationalization of water use has been one of the goals in many industrial activities, and, in particular, in the petrochemical industry. Such goals demand technological innovations in the productive processes and in techniques for treatment and reuse of water in the production chain. The high costs of industrial water, particularly in some metropolitan regions, have stimulated the industries to evaluate the possibilities of water reuse. The objective of this work is to evaluate the feasibility of the UV/H2O2 photochemical process applied to the treatment of process waste water containing polypropylene, aiming at the reuse of the waste water in the as process water in the industrial complex, thus reducing the need for tap water supply and waste water generation rate. The first part of this study consisted of laboratory-scale experiments in a batch photochemical reactor with four different waste water streams to perform the technical and economical feasibility of the photochemical treatment, as well to obtain data on the degradation rate. Based on the results of the first part, the second part of this study consisted of experiments in a continuous photochemical reactor, aimed at obtaining experimental data for reactor scale-up. Experimental results indicate that the UV/H2O2 photodegradation process is able to remove more than 90% of the organic compounds contained in the waste water. However, only waste waters containing relatively low contaminant levels (between 6 and 12 mgC L-1) can be treated at economically favourable costs.