Le stockage est la méthode de traitement des déchets non dangereux la plus communément utilisée dans le monde entier car elle est un moyen simple et économique pour leur élimination. Malgré une volonté nationale et européenne pour réduire le stockage de déchets biodégradables, une quantité non négligeable est encore enfouie entrainant la mise en place de modes de gestion spécifique. Autrefois exploitées comme de simples fosses de remplissage, les installations de stockage de déchets non dangereux (ISDND) sont aujourd’hui des ouvrages complexes dont l’objectif est de réduire l’impact environnemental et de valoriser énergétiquement le biogaz produit par la biodégradation de la matière organique. Afin d’accélérer les processus de biodégradation un casier de déchets peut être exploité en mode bioréacteur en réinjectant des lixiviats pour augmenter la teneur en eau des déchets. Le défi des années 2000 était de dimensionner et valider les systèmes de réinjection de lixiviat pour garantir une distribution optimale de la teneur en eau dans les massifs de déchets. Aujourd’hui, la question est de de suivre l’évolution de la biodégradation en tous points d’un massif pour notamment comprendre l’effet de ce mode de gestion. Les méthodes géophysiques en plus d’être non-destructives et spatialisantes sont utilisées depuis des années sur les ISDND et pourraient être sensibles à l’évolution de la biodégradation d’un massif de déchets, comme cela a été démontré pour la biodégradation d’autres milieux. Ainsi la problématique de cette thèse est d’évaluer la capacité de certaines méthodes géophysiques pour suivre l’évolution des paramètres bio-physico-chimiques d’un massif de déchets au cours de sa biodégradation. Un premier travail bibliographique a permis d’identifier quatre méthodes électriques parmi les méthodes géophysiques disponibles pour répondre à cette question :• La résistivité électrique• Le potentiel spontané• La polarisation provoquée• La polarisation provoquée spectraleAprès cet état de l’art, le travail de thèse a été séparé en trois parties. La première a été consacrée à la mise en place du suivi de ces quatre méthodes à l’échelle du laboratoire dans des conditions contrôlées, la seconde à analyser le suivi géophysique long terme sur le site industriel de la SAS Les Champs Jouault et la dernière a évaluée les observations à ces deux échelles. Enfin, la conclusion présente le potentiel de la méthode de mesure du potentiel provoquée comme la plus pertinente pour suivre l’évolution de la biodégradation d’un déchet non dangereux au cours du temps et aborde son utilisation dans un cadre industriel. / Storage is the most commonly used waste treatment method in the world because it is a simple and economical way to dispose of solid waste. Despite a national and European desire to reduce the storage of biodegradable waste, a significant amount is still buried, leading to the implementation of specific management methods. Formerly exploited as mere filling pits, MSWL are today complex structures whose objective is to reduce the environmental impact and energetically valorize the biogas produced by the biodegradation of organic matter. In order to accelerate biodegradation processes, a waste cell can be operated in bioreactor mode by reinjecting leachates to increase the water content of the waste. The challenge of the 2000s was to size and validate leachate re-injection systems to ensure optimal distribution of water content in the waste mass. Today, the question is to monitor evolution of the biodegradation in all points of a waste mass in particular to understand the effect of this management mode. Geophysical methods in addition to being non-destructive and spatializing have been used for years on MSWLs and could be sensitive to the evolution of a waste mass biodegradation, as has been demonstrated for the biodegradation of others environments. Thus the problematic of this thesis is to evaluate the capacity of certain geophysical methods to monitor the evolution of the bio-physicochemical parameters of a waste mass during its biodegradation. A first bibliographic work identified four electrical methods among the geophysical methods available to answer this question:• Electrical resistivity• Self potential• Time domain induced polarization• Spectral induced polarizationAfter this state of the art, the thesis work was separated into three parts. The first one was devoted to the implementation of the monitoring of these four methods at the laboratory scale under controlled conditions, the second to analyze the long-term geophysical monitoring at the industrial site of SAS Les Champs Jouault and the last one to evaluate the observations at these two scales. Finally, the conclusion presents the potential of time domain induced polarization method as the most relevant to monitor the evolution of a waste mass biodegradation over time and discusses its use in an industrial setting.

The major purpose of this study is to analyze hazardous waste enforcement by the states as mandated by the Resource Conservation and Recovery Act of 1976 (RCRA). States' historical enforcement records from 1980 to 1990 are analyzed to determine the pattern of variations in enforcement. This study differs from previous studies on hazardous waste regulation in that it employs longitudinal data from 1980 to 1990 to analyze states' enforcement effort.

This thesis explores patterns of environmental inequality in Portland, Oregon; both the existence of spatial environmental inequalities and the structural and local forces which contribute to them. Research on environmental inequality, or inequitable exposure to toxins, has shown that minority and low-income populations experience the bulk of the exposure to environmental hazards. Although Portland is often cited as the archetype of a sustainable city, environmental inequality is a pervasive issue. This thesis examines the health inequalities that characterize underserved communities in Portland. Utilizing a mixed methods approach, the researcher uses 1) logistic regression to statistically assess the relationship between race, poverty, and Superfund site locations, and 2) in-depth interviews with members of Oregon's environmental justice movement to help understand the historical, social, political, and economic conditions of Portland and their subsequent influence on environmental inequalities. Quantitative data is pooled from 2000 census and 2011 Environmental Protection Agency (EPA) sources. The quantitative findings demonstrate that environmental inequality is present in Portland, with African Americans being particularly overrepresented in tracts with Superfund sites. The quantitative analyses ultimately suggest that minimally populated, highly impoverished tracts with approximately 11% African American residents are most likely to house a Superfund site. The qualitative findings show that a variety of structural and local forces play prominent roles in the formation of Portland's environmental inequalities. The qualitative analyses reveal this to be a multifaceted and complex process that is indicative of Portland's history of racial inequality, contemporary free market and business forces, and governmental interests which culminate in trends of inequitable development.

No description available.

No description available.

Waste management is an integral part of sustainable urban development. In the modern world, when attitude to waste is being shifted towards “waste as resource” and “waste as income generator”, ensuring separation of hazardous waste from the general waste stream becomes increasingly important. Sorting hazardous waste is critical in light of the whole recycling idea. Hazardous elements, while bearing a certain value if properly handled, can negate the costs of the recyclable materials if found in their stream. They present enormous long-term losses, if introduced into the environment, and can negatively influence our ability to benefit from recycling. Convenience is one of the most effective tools in increasing recycling rates (Carlson 2001, p.1275). It is a personally defined concept, and often depends on the users’ lifestyle-related factors. This thesis explores users’ understanding and habits of handling hazardous waste, as well as the challenges they encounter and their views and suggestions on convenience of hazardous waste recycling systems. The main method used in this comparative case study research is qualitative interviews conducted with a variety of people with different lifestyles living in Malmo. First, the thesis develops a list of lifestyle-related factors which lower the perceived convenience of recycling. People consider recycling to be effort demanding or easy not just because they are women or men, young or old, live in a dense area or not. But this perception is influenced by having or not having access to a transporting vehicle and time available, their household’s waste producing rates, time spent living in a certain place, available space for storing waste; physical constraints or difficulties with self-organization at home; established or not recycling habits or level of environmental concern. People’s recycling behavior is determined by these personal lifestyle-related factors. Second, aspects of convenience are being presented as the focus areas which planners should consider in increasing recycling rates. The convenience aspects are developed with regards to the challenges people with different lifestyles experience in recycling. While lifestyle-related factors cannot be influenced directly, aspects of convenience can be employed in ensuring efficiency of hazardous waste collection system. It is important that the hazardous waste collection system design takes them into the full account. Detailed descriptions of the aspects of perceived convenience are presented. They are grouped into convenience of access to information and convenience through facilities and services. The final conclusion of the thesis is that involving users would assist in addressing key aspects of recycling systems’ perceived convenience and increase their efficiency. It is hoped that the information can be helpful in designing successful hazardous waste collection systems with increased capability to reach national goals in recycling and reduce the amounts of hazardous substances in general waste. / Master Programme: Sustainable Urban Management, 2011-2012Thesis: On the Way to the Convenient Hazardous Waste Collection System in Malmo, Sweden. Users’ PerspectiveAuthor: Olga Belorusova (OB)Tutor: Peter ParkerDate of Submission: 24 May, 2012.

No description available.

Abstract in English / Incineration is still a widely utilised method for treating healthcare risk waste in the Republic of South Africa. As much as incinerators are needed, the fact that they are still a critical source of hazardous toxic air pollutants that are not easy to manage cannot be disregarded. The Ministry of Environmental Affairs has promulgated a new regulation for General and Hazardous Waste Thermal Treatment. This exceedingly stringent air pollution legislation requires that existing incinerators be modified or redesigned to meet the new air quality standards, or face closure in the event that they fail to comply. The regulation contains strict emission requirements for concentrations of stack gases such as CO2, NO2, NOx, HCl, HF, CO, SO2, as well as TOC and PM. To be certain that emissions are within the standard, incineration facilities are instructed to reduce the acid gas emissions and to have permanent on-line monitoring equipment for stack testing of regulated pollutants. Since the promulgation of the new legislation in April 2015, none of the incinerators in South Africa has been able to achieve the new requirements. This study, based on the quantitative approach, was conducted in search of a cost-effective method of controlling acid gas emissions from incinerators without major adjustments to the plants. During the study, 60 kg of sorbacal Ca(OH)2 was injected into a lime feeder every day. A variable speed drive was used to inject Ca(OH)2 into the furnace continuously at a rate of between 2.5 kg/h and 3.5 kg/h. The temperature was maintained between 850°C and 1200°C with the use of four gas burners. Two manual blowers were utilised to ensure a continuous flow of Ca(OH)2 into the reaction chamber and filtration system. Comparative analysis was done to compare gas emission levels before and after the use of hydrated lime. Descriptive statistics were used to compute the mean, frequency and percentages, while Wilcoxon sign rank test established whether hydrated lime was significant in reducing gaseous emissions or not. Wilcoxon sign rank test showed a statistically significant difference (P<0.05) in the reduction of all gaseous emissions using hydrated lime, except particulate matter where there was a significant increase in emissions. This technology was able to achieve high removal efficiency of 97% for HCl, 86% for HF, 83% for NOx, 87% for SO2 and 74% for NO2. The optimum temperature for SO2 and NOx was 1020°C. For HCl it was between 1190°C and 1200°C, and for NO2 it was between 1120°C and 1200°C. The amount of particulate matter increased along with the concentration of the Ca(OH)2 injections. Ca(OH)2 was found to be cost effective in the controlling and capturing of gaseous emissions. It is recommended that combustion requirements, such as heat, oxygen and turbulence, be considered to reduce the amount of gases generated during the incineration of healthcare risk waste. It is also recommended that electrostatic precipitators be used instead of fabric filters to improve the efficiency of capturing the particulate matter. / Environmental Sciences / M.Sc. (Environmental Science)

Women’s involvement in collective struggles for environmental quality has surged in recent years, as has research focusing on this phenomenon. Consistent with this research, a feminist lens is useful in revealing a model of community struggle that features women’s activities and strategies to expose environmental insult. I use a case study of community protest in Hermosillo, a city in the Mexican state of Sonora, to feature social networks as a means of politicizing the placement of a toxic waste dump six kilometers outside the city. A feminist perspective reveals these social networks to be more than a way to mobilize resources. It allow us to see the ways in which gender interacts with globalized relations of power, political ecology, and environmental policy, and to validate a creative way in which women can out-maneuver the gendered constraints to political participation. An analysis of how social networks served in this particular struggle suggests that they are an important component in the process through which women gained voice and authored oppositional discourse in contexts where these have been previously denied, and ultimately deconstructed the political authority that sanctioned the dump.

A geração de resíduos sólidos é inerente ao desenvolvimento humano. O concreto armado é um dos materiais mais utilizados pelo homem e tem o cimento Portland como seu principal constituinte, o qual é produzido pela moagem de clínquer e gesso. O clínquer pode ser definido como um mineral artificial, obtido a partir das reações físico-químicas de calcário, argila e corretivos a altas temperaturas, em forno rotativo industrial, mediante a queima de combustíveis fósseis. No início da década de 70 foram realizadas as primeiras experiências de substituição de combustíveis fósseis por resíduos industriais nos Estados Unidos e países europeus, através da técnica denominada co-processamento, resultando na manufatura de um produto ao mesmo tempo em que os resíduos eram eliminados. O co-processamento se baseia na recuperação da energia disponível nos resíduos, substituindo parte daquela fornecida pelos combustíveis tradicionais ou na substituição de matérias-primas por resíduos com características químicas semelhantes àquelas normalmente empregadas na produção do clínquer. No estado de São Paulo as primeiras iniciativas para a utilização de resíduos industriais em fornos de clínquer ocorreram no início da década de 90. A partir de 1997 os órgãos ambientais de alguns estados brasileiros normatizaram procedimentos de licenciamento da atividade que foi, posteriormente, uniformizada por norma em âmbito federal. No ano de 1995 a Companhia de Cimento Ribeirão Grande/SP, Brasil, iniciou os procedimentos visando a substituição parcial dos combustíveis utilizados nos fornos rotativos por uma mistura de resíduos industriais. No período de 1995 a 2002 foram realizadas campanhas de amostragens em chaminés para avaliação das emissões atmosféricas dos dois fornos de produção de clínquer. A análise dos resultados obtidos associada às demais informações disponíveis de monitoramento das características das matérias-primas e combustíveis utilizados, bem como dos produtos finais, clínquer e cimento, não evidenciou alterações significativas nos níveis de emissões atmosféricas, sobretudo de material particulado e óxidos de enxofre, que pudessem ser associadas à utilização dos resíduos. Foram confirmadas as baixas emissões de inorgânicos e evidenciado o papel representado pelos resíduos no aporte dessas substâncias no sistema-forno, concluindo-se que esse aporte pode ser tão ou mais importante pela via da alimentação da farinha, cujos teores estão associados às características das jazidas minerais utilizadas. Foi também confirmada a alta eficiência do sistema-forno na destruição e remoção dos compostos orgânicos perigosos alimentados durante os testes de queima. / The production of industrial residues in inherent to the human development. The cement concrete is one of the most used material, manly the type portland cement, which is constituted by grinding clinker and gypsum together. Clinker can be defined as an artificial mineral obtained by applying physico-chemical reactions, at very high temperatures, to an appropriated mixture of limestone, clay, and some other materials in a rotating industrial kiln wich burns fossil fuels. In the early 1970 decade occurred the first experiences substituting fossil fuels by organic residues in USA and Europe through a technique named co-processing that results the production of certain manufacture while eliminates residues. Co-processing is based in the recovery of thermal energy and/or the mass of some constituents from some residues, with the same chemical characteristics of normal sources of energy, then economizing fuels and mass constituents and making better use of residues, otherwise useless and environmentally polluters. In the state of São Paulo this practice began in early 1990 decade and by 1997 it was started the standardization of the rules for its use in some units of the federation. Later this activity was regulated by nationally approved standard rules. In 1995 the industry Companhia de Cimento Ribeirão Grande (CCRG), a cement plant located in the city of Ribeirão Grande, São Paulo state, Brazil, started procedures searching the partial substitution of the normal fuels by a mixture of industrial residues in its two rotating kilns. The gaseous emissions from the chimneys of these two clinker kilns were studied from 1995 to 2002 about the use of residues as part of the fuel. Analyses of the final results associated with other informations concerning to the quality of raw minerals, fuels and products did not show significant alterations in atmospheric emissions, mainly for particulate material and sulfur oxides, related with the use of residues. The emissions of inorganic continued to be low and not significantly altered by the presence of residues. It was possible to conclude that the alterations in inorganic emissions depend more from the quality of the raw minerals feed in the kilns, which is more difficult to control, than from the presence of residues being burn with the fuel. It was shown a high efficiency in the destruction of dangerous organic compounds feed in the cement kilns, under test conditions.