Det nya internetprotokollet, IPv6 är annorlunda uppbyggt och har större header jämfört med dess föregångare IPv4. Denna rapport undersöker de två protokollens prestanda, avseende överföringskapacitet, jitter, paketförlust och CPU-belastning i operativsystemen Windows 7 och Ubuntu 10.10. Undersökningen genomfördes med hjälp av experiment och mätningar för att visa vilket protokoll och operativsystem som har bäst prestanda. Mätverktyget som användes är Iperf. Resultatet visar att det äldre protokollet presterar lite bättre än dess ersättare vid flertalet mätningar, såsom överföringskapacitet och paketförlust. Resultatet visar även att Windows fick en högre CPU-belastning än Ubuntu vid flertalet tillfällen. / The new internet protocol, IPv6 is differently structured and has a larger header compared to its predecessor, IPv4. This report examines the two protocols performance, in regard of transfer, jitter, packet loss and CPU-load on the two operating systems, Windows 7 and Ubuntu 10:10. The survey was conducted by means of experiments and measurements to show which protocol and operating system that accomplishes the best performance. The measurement tool used in the experiments was Iperf. The result shows that the earlier protocol, IPv4, performs slightly better than its replacement in most measurements, such as transmission capacity and packet loss. The results also shows that Windows 7 has a higher CPU-load than Ubuntu on several occasions in the experiments.

This master’s thesis is focused on ensuring of Quality of Service (QoS) in wireless network for standards IEEE 802.11 a/b/g/n. First part of this thesis is focused on the theory of this issue. It covers methods of data transfer in computer networks and individual transfer parameters especially on parameters needed to ensure quality of service. It also describes standards for wireless data transmission and protocols for real time data transmission. The second part is devoted to OPNET modeler and to simulations created on this program. Simulations are focused on real-time data transfer and compare the standards in terms of delay and jitter.

Diploma thesis is focused on the supporting of Quality of Services in wireless networks, especially in the Linux operation systems. The topic is connected not only with OS, but also with the wireless standard, which supports QoS in wireless networks called IEEE 802.11e. QoS is needed especially for time-consuming data transfers in real time. The theoretical part deals with the theoretical analysis of the issue of the QoS support. There are described parameters, which occurred in quality of services support. This section also deals with the division of services that are used to transmit data across computer networks. It also describes the QoS support in wireless networks according 802.11e, its implementation and methods of accessing a medium with a without possibility of traffic. This part is followed by a description of QoS support in UNIX operating systems. The chapter describes how is the QoS support designed in these operating systems. There are also characterized concrete tools which are used for control the data flow in the operating systems using Linux. At the end the theoretical part deals with different types of queues and methods used in linux OS. In the practical part of the thesis, there are various designed topologies and scenarios to verify the functionality of QoS support in wireless networks using a Unix system. These chapters show the results of different tests at selected transmission data streams that are sensitive to transmission time. There is also verified cooperation of QoS support between devices operating on the network and data link layers. The output of this work is to design a laboratory exercise for the subject Network Architecture. This exercise is focused on familiarization with the QoS support functionality in wireless networks and in Unix-like operating systems. This chapter also describes the devices and programs that are needed to measure this task. The last part of the chapter describes the procedure for the preparation of the measuring station. For this laboratory task, there is an inserted manual in the annex.

This thesis discusses wireless network standards 802.11a/b/g/n. First part explains basic principles of networks and media access. Next the standard IEEE 802.11, general QoS parameters and their application in wireless networks, according to standard 802.11e are analyzed. Second part of the thesis verifies the acquired knowledge in simulating program Opnet - effects of the delay, jitter and packet loss on VoIP call are tested. In the last part of the thesis a network for video streaming has been designed. The video was streamed in different qualities and the influence of other network traffic (with and without the support of QoS) on the video streaming was tested.

The short-term jitter and longer-term wander of the frequency sweep profile of a Vernier-Tuned Distributed Bragg Reflector (VT-DBR) laser at 1550 nm used in optical coherence tomography (OCT) and other sensing applications is characterized in this work. The VT-DBR has demonstrated success in source-swept OCT (SSOCT), performing both intensity and phase-sensitive OCT. The purpose of this paper is to investigate one of the unique aspects of the VT-DBR laser that makes it successful in OCT: the stability of the linear optical frequency sweep. A highly stable linear optical frequency sweep implies benefits for further fiber sensing applications including fiber Bragg grating and spectroscopy sensors. Short-term jitter measurements of the optical frequency sweep are taken using a 3-cavity 100 GHz free spectral range solid etalon, an athermal fiber Bragg grating, a molecular-based gas absorption reference cell, and a Mach-Zehnder interferometer. These four optical filters are used to convert time fluctuations into intensity fluctuations that can be measured by high speed optical receivers. Short term jitter values on the order of 0.5 – 0.6 pm RMS (63 – 82 MHz RMS) are typical values in the VT-DBR lasers systems characterized in this work. This level of jitter is compelling for OCT and fiber-sensing applications. Longer-term wander is characterized using a multiple-gas absorption reference cell. The long term stability and temperature insensitivity of the absorption cell is ideal for long-term wander characterization of the laser frequency sweeps. Wander values on the order of 2.6 pm of wavelength shift over an 8 hour time frame are reported in this work. The slope of the frequency versus time function of the laser sweep, on the order of 100 MHz/sample, is found to deviate by no more than 0.03% over the same 8 hour time frame. Both the long term wavelength shift and consistency of the slope indicate that these sources will perform well in OCT and fiber sensing applications. Mechanisms responsible for short-term jitter and longer- term wavelength wander likely include contributions from the laser source itself and from the high speed electronic drive circuitry that creates the wavelength ramp. Investigation of ambient temperature’s influence on the wavelength wander is also highlighted in the work.

This thesis describes research on acoustically excited bluff body flow-fields, motivated by the problem of combustion instabilities in devices utilizing these types of flame-holders. Vortices/convective-structures play a dominant role in perturbing the flame during these combustion instabilities. This thesis addresses a number of issues related to the origin, evolution and the interaction of these structures with the flame. The first part of this thesis reviews the fluid mechanics of non-reacting and reacting bluff body flows. The second part describes the spatio/temporal characteristics of bluff-body flames responding to excitation. The key processes controlling the flame response have been identified as 1) the anchoring of the flame at the bluff body, 2) the excitation of flame-front wrinkles by the oscillating velocity field and 3) flame propagation normal to itself at the local flame speed. The first two processes control the growth of the flame response and the last process controls the decay. The third part of this thesis describes the effect of acoustic excitation on the velocity field of reacting bluff body flows. Acoustic disturbances excite the Kelvin-Helmholtz (KH) instability of the reacting shear layer. This leads to a spatially decaying vorticity field downstream of the bluff body in the shear layers. The length over which the decay occurs was shown to scale with the length of the recirculation zone of the bluff body, i.e. the length over which the velocity profile transitions from shear layer to wake. The flame influences this decay process in two ways. Gas expansion across the flame reduces the extent of shear by reducing the magnitude of negative velocities within the recirculation zone. This combined with the higher product diffusivity reduces the length of the recirculation zone, thereby further augmenting the decay of the vorticity fluctuations. Lastly, these results also revealed phase jitter - a cycle-to-cycle variation in the position of the rolled-up vortices. Close to the bluff-body, phase jitter is very low but increases monotonically in the downstream direction. This leads to significant differences between instantaneous and ensemble averaged flow fields and, in particular, the decay rate of the vorticity in the downstream direction.

Electrical stimulation of the retina affected by photoreceptor loss (e.g., cases of retinitis pigmentosa) elicits the perception of luminous spots (so-called phosphenes) in the visual field. This phenomenon, attributed to the relatively high survival rates of neurons comprising the retina's inner layer, serves as the cornerstone of efforts to provide a microelectronic retinal prosthesis -- a device analogous to the cochlear implant. This thesis concerns phosphenes -- their elicitation and modulation, and, in turn, image analysis for use in a prosthesis. This thesis begins with a comparative review of visual modelling of electrical epiretinal stimulation and analogous acoustic modelling of electrical cochlear stimulation. The latter models involve coloured noise played to normal listeners so as to investigate speech processing and electrode design for use in cochlear implants. Subsequently, four experiments (three psychophysical and one numerical), and two statistical analyses, are presented. Intrinsic signal optical imaging in cerebral cortex is canvassed appendically. The first experiment describes a visual tracking task administered to 20 normal observers afforded simulated prosthetic vision. Fixation, saccade, and smooth pursuit, and the effect of practice, were assessed. Further, an image analysis scheme is demonstrated that, compared to existing approaches, assisted fixation and pursuit (but not saccade) accuracy (35.8% and 6.8%, respectively), and required less phosphene array scanning. Subsequently, (numerical) information-theoretic reasoning is provided for the scheme's superiority. This reasoning was then employed to further optimise the scheme (resulting in a filter comprising overlapping Gaussian kernels), and may be readily extended to arbitrary arrangements of many phosphenes. A face recognition study, wherein stimuli comprised either size- or intensity-modulated phosphenes, is then presented. The study involved unpracticed observers (n=85), and showed no 'size' --versus--'intensity' effect. Overall, a 400-phosphene (100-phosphene) image afforded subjects 89.0% (64.0%) correct recognition (two-interval forced-choice paradigm) when five seconds' scanning was allowed. Performance fell (64.5%) when the 400-phosphene image was stabilised on the retina and presented briefly. Scanning was similar in 400- and 100-phosphene tasks. The final chapter presents the statistical effects of sampling and rendering jitter on the phosphene image. These results may generalise to low-resolution imaging systems involving loosely packed pixels.

This thesis proposes a decision-feedback equalizer (DFE) scheme for blind ADC-based receivers to overcome the challenges introduced by blind sampling. It presents the design, simulation, and implementation of a 5Gb/s speculative DFE for a 2x blind ADC-based receiver. The complete receiver, including the ADC, the DFE, and a 2x blind clock and data recovery (CDR) circuit, is implemented in Fujitsu’s 65-nm CMOS process. Measurements of the fabricated test-chip confirm 5Gb/s data recovery with bit error rate (BER) less than 1e−12 in the presence of a test channel introducing 13.3dB of attenuation at the Nyquist frequency of 2.5GHz. The receiver tolerates 0.24UIpp of high-frequency sinusoidal jitter (SJ) in this case. Without the DFE, the BER exceeds 1e−8 even when no SJ is applied.

This thesis proposes a decision-feedback equalizer (DFE) scheme for blind ADC-based receivers to overcome the challenges introduced by blind sampling. It presents the design, simulation, and implementation of a 5Gb/s speculative DFE for a 2x blind ADC-based receiver. The complete receiver, including the ADC, the DFE, and a 2x blind clock and data recovery (CDR) circuit, is implemented in Fujitsu’s 65-nm CMOS process. Measurements of the fabricated test-chip confirm 5Gb/s data recovery with bit error rate (BER) less than 1e−12 in the presence of a test channel introducing 13.3dB of attenuation at the Nyquist frequency of 2.5GHz. The receiver tolerates 0.24UIpp of high-frequency sinusoidal jitter (SJ) in this case. Without the DFE, the BER exceeds 1e−8 even when no SJ is applied.

The quest for multi-standard and software-defined radio (SDR) receivers calls for high flexibility in the receiver building-blocks so that to accommodate several wireless services using a single receiver chain in mobile handsets. A potential approach to achieve flexibility in the receiver is to move the analog-to-digital converter (ADC) closer to the antenna so that to exploit the enormous advances in digital signal processing, in terms of technology scaling, speed, and programmability. In this context, continuous-time (CT) delta-sigma (ΔƩ) ADCs show up as an attractive option. CT ΔƩ ADCs have gained significant attention in wideband receivers, owing to their amenability to operate at a higher-speed with lower power consumption compared to discrete-time (DT) implementations, inherent anti-aliasing, and robustness to sampling errors in the loop quantizer. However, as the ADC moves closer to the antenna, several blockers and interferers are present at the ADC input. Thus, it is important to investigate the sensitivities of CT ΔƩ ADCs to out-of-band (OOB) blockers and find the design considerations and solutions needed to maintain the performance of CT ΔƩ modulators in presence of OOB blockers. Also, CT ΔƩ modulators suffer from a critical limitation due to their high sensitivity to the clock-jitter in the feedback digital-to-analog converter (DAC) sampling-clock. In this context, the research work presented in this thesis is divided into two main parts. First, the effects of OOB blockers on the performance of CT ΔƩ modulators are investigated and analyzed through a detailed study. A potential solution is proposed to alleviate the effect of noise folding caused by intermodulation between OOB blockers and shaped quantization noise at the modulator input stage through current-mode integration. Second, a novel DAC solution that achieves tolerance to pulse-width jitter by spectrally shaping the jitter induced errors is presented. This jitter-tolerant DAC doesn’t add extra requirements on the slew-rate or the gain-bandwidth product of the loop filter amplifiers. The proposed DAC was implemented in a 90nm CMOS prototype chip and provided a measured attenuation for in-band jitter induced noise by 26.7dB and in-band DAC noise by 5dB, compared to conventional current-steering DAC, and consumes 719µwatts from 1.3V supply.