Networks with hundreds of ad hoc nodes equipped with communication and position finding abilities are conceivable with recent advancements in technology. Methods are presented in this thesis to assess the communicative capabilities and node position estimation of mobile ad hoc networks. Specifically, we investigate techniques for providing communication and geolocation with specific characteristics in wireless ad hoc networks. The material presented in this thesis, communication and geolocation, may initially seem a collection of disconnected topics related only distantly under the banner of ad hoc networks. However, systems currently in development combining these techniques into single integrated systems. In this thesis first, we investigate the effect of multilayer interaction, including fading and path loss, on ad hoc routing protocol performance, and present a procedure for deploying an ad hoc network based on extensive simulations. Our first goal is to test the routing protocols with parameters that can be used to characterize the environment in which they might be deployed. Second, we analyze the location discovery problem in ad hoc networks and propose a fully distributed, infrastructure-free positioning algorithm that does not rely on the Global Positioning System (GPS). The algorithm uses the approximate distances between the nodes to build a relative coordinate system in which the node positions are computed in three-dimensions. However, in reconstructing three-dimensional positions from approximate distances, we need to consider error threshold, graph connectivity, and graph rigidity. We also statistically evaluate the location discovery procedure with respect to a number of parameters, such as error propagation and the relative positions of the nodes.

Continuous-time (CT) Delta-Sigma Modulators (DSMs) have re-gained popularity recently for oversampling analog-to-digital conversion, because they are more suitable for low supply voltage implementation than their discrete-time (DT) counterparts, among other reasons. To the state of art at the low voltage front, a CT O.5-V audio-band DSM with a return-to-open feedback digital-to-analog converter has been reported. However, the O.5-V CT DSM has a limited performance of 74-dB SNDR due to clock jitters and other factors caused by the ultralow supply. / Finally, a O.5-V 2-1 cascaded CT DSM with SCR feedback is proposed. A new synthesis method is presented. Transistor-level simulations show that a 98dB SNDR is achieved over a 25-kHz signal bandwidth with a 6.4MHz sampling frequency and 350muW power consumption under a 0.5-V supply. / In this thesis, three novel ULV audio-band CT DSMs with high signal-to-noise-plus-distortion ratio (SNDR) are reported for a nominal supply of O.5V. The first one firstly realizes a switched-capacitor-resistor (SCR) feedback at O.5V, enabled by a fast amplifier at O.5V, for reduced clock jitter-sensitivity. Fabricated in a O.13mum CMOS process using only standard VT devices, the 3rd order modulator with distributed feedback occupies an active area of O.8mm2 . It achieves a measured SNDR of 81.2dB over a 25-kHz signal bandwidth while consuming 625muW at O.5-V. The measured modulator performance is consistent across a supply voltage range from O.5V to O.8V and a temperature range from -20°C to 90°C. Measurement results and thermal-noise calculation show that the peak SNDR is limited by thermal noise. / The scaling of the feature sizes of CMOS technologies results in a continuous reduction of supply voltage (VDD) to maintain reliability and to reduce the power dissipation per unit area for increasingly denser digital integrated circuits. The VDD for low-power digital circuits is predicted to drop to O.5V in about ten years. Ultra-low voltage (ULV) operation will also be required for the analog-to-digital converter, a universal functional block in mixed-signal integrated circuits, in situations where the benefits of using a single VDD out-weigh the overhead associated with multi-V DD solutions. / The second ULV CT DSM employs a feed-forward loop topology with SCR feedback. Designed in O.13mum CMOS process, the modulator achieves a post-layout simulation (thermal noise included) result of 89dB SNDR over a 25-kHz signal bandwidth. The 0.13mum CMOS chip consumes an active area of O.85mm2 and 682.5muW at O.5-V supply. It achieves an excellent measured performance of 87.8dB SNDR over a 25-kHz signal bandwidth and al02dB spurious-free dynamic range. To the best of our knowledge, this performance is the highest for DSMs in this supply voltage range. Thanks to the proposed adaptive biasing technique, the measured modulator performance is consistent across a supply voltage range from O.4V to O.75V and a temperature range from -20°C to 90°C. / Chen, Yan. / Adviser: Kong Pang Pun. / Source: Dissertation Abstracts International, Volume: 73-04, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2011. / Includes bibliographical references (leaves 127-135). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.

Yeung Wing-ki. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2003. / Includes bibliographical references (leaves 64-65). / Abstracts in English and Chinese. / Abstracts --- p.i / 摘要 --- p.iii / Acknowledgements --- p.iv / Contents --- p.v / List of Figures --- p.vii / Chapter 1. --- Introduction --- p.1 / Chapter 1.1. --- Low ower Design --- p.1 / Chapter 1.2. --- ower Consumtion in Conventional CMOS Logic --- p.2 / Chapter 1.3. --- Adiabatic Switching --- p.7 / Chapter 1.3.1. --- Varying Suly Voltage --- p.7 / Chapter 1.3.2. --- Charge Recovery --- p.12 / Chapter 2. --- Adiabatic Quasi-static CMOS Logic --- p.13 / Chapter 2.1. --- AqsCMOS Logic Building Block --- p.14 / Chapter 2.2. --- AqsCMOS inverter --- p.17 / Chapter 2.3. --- ower Reduced in Sinusoidal Suly --- p.18 / Chapter 2.4. --- Clocking Scheme --- p.21 / Chapter 3. --- Contactless Smart Card --- p.23 / Chapter 3.1. --- Architecture --- p.23 / Chapter 3.2. --- Standardization --- p.26 / Chapter 3.3. --- Universal Asynchronous Receiver and Transmitter (UART) --- p.30 / Chapter 4. --- Clock Recovery --- p.35 / Chapter 4.1 --- Adiabatic Ring Oscillator --- p.35 / Chapter 4.2. --- Secial Frequencies of AqsCMOS Ring Oscillator --- p.39 / Chapter 4.3. --- ower Extraction --- p.41 / Chapter 5. --- Evaluations and Measurement Results --- p.43 / Chapter 5.1. --- Outut Transitions --- p.43 / Chapter 5.2. --- Ring Oscillator --- p.44 / Chapter 5.3. --- Synchronization --- p.47 / Chapter 5.4. --- ower Consumtion --- p.49 / Chapter 6. --- Conclusion --- p.53 / Aendix --- p.54 / Glossary --- p.62 / Reference --- p.64

Power consumption is a major concern for modern processors. Voltage scaling is one of the most effective mechanisms to reduce power consumption. However, voltage scaling is limited by large memory structures, such as caches, where many cells can fail at low voltage operation. As a result, voltage scaling is limited by a minimum voltage (Vccmin), below which the processor may not operate reliably. Researchers have proposed architectural mechanisms, error detection and correction techniques, and circuit solutions to allow the cache to operate reliably at low voltages. Architectural solutions reduce cache capacity at low voltages at the expense of logic complexity. Circuit solutions change the SRAM cell organization and have the disadvantage of reducing the cache capacity (for the same area) even when the system runs at a high voltage. Error detection and correction mechanisms use Error Correction Codes (ECC) codes to keep the cache operation reliable at low voltage, but have the disadvantage of increasing cache access time. In this thesis, we propose a novel architectural technique that uses spare cache blocks to back up a set-associative cache at low voltage. In our mechanism, we perform memory tests at low voltage to detect errors in all cache lines and tag them as faulty or fault-free. We have designed shifter and adder circuits for our architecture, and evaluated our design using the SimpleScalar simulator. We constructed a fault model for our design to find the cache set failure probability at low voltage. Our evaluation shows that, at 485mV, our designed cache operates with an equivalent bit failure probability to a conventional cache operating at 782mV. We have compared instructions per cycle (IPC), miss rates, and cache accesses of our design with a conventional cache operating at nominal voltage. We have also compared our cache performance with a cache using the previously proposed Bit-Fix mechanism. Our result show that our designed spare cache mechanism is 15% more area efficient compared to Bit-Fix. Our proposed approach provides a significant improvement in power and EPI (energy per instruction) over a conventional cache and Bit-Fix, at the expense of having lower performance at high voltage.

The objective of the proposed research is to investigate the design of Self-Aware Radio Frequency Circuits and Wireless Communication Systems that can adapt to environmental and process variations to always operate at minimum power levels possible, extending battery life. The explosive growth of portable battery operated devices has mandated design of low power circuits and systems to prolong battery life. These devices fabricated in modern nanoscale CMOS technologies suffer from severe process variation due to the reduced controllability of the fabrication process, causing yield loss. This calls for integrated low power and process tolerant design techniques, or design of systems that can adapt to its process and environment to maintain its performance while minimizing power consumption. Currently, most of the wireless circuits are designed to meet minimum quality-of-service requirements under worst-case wireless link conditions (interference, noise, multi-path effects), leading to high power consumption when the channel is better than worst-case. In this research, we develop a multi-dimensional adaptation approach for wireless transmitters and receivers that optimally trades-off power vs. performance across temporally changing operating conditions by concurrently tuning control parameters in the RF front end to lower power consumption. Tunable circuits (e.g. LNA) with built-in tuning knobs providing independent controllability of important specifications allow optimal adaptation. Process sensing using intelligent test and calibration facilitates yield improvement and the design of process tolerant environment adaptive systems. Low cost testing methodologies are developed for identification of the health of the wireless circuit/system. These are used in conjunction with tuning algorithms that tune a wireless system under process variation to meet performance specifications and recover yield loss. This testing and adaptation is performed once during the post manufacture test/tune phase to compensate for manufacturing variations. This can also be applied periodically during in field operation of a device to account for performance degradation due to ageing. Finally, process tolerant environment adaptive systems are designed.

Real world is analog but the processing of signals can best be done in digital domain. So the need for Analog to Digital Converters(ADCs) is ever rising as more and more applications set in. With the advent of mobile technology, power in electronic equipment is being driven down to get more battery life. Because of their ubiquitous nature, ADCs are prime blocks in the signal chain in which power is intended to be reduced. In this thesis, four techniques to reduce power in high speed pipelined ADCs have been proposed. The first is a capacitor and opamp sharing technique that reduces the load on the first stage opamp by three fold. The second is a capacitor reset technique that aids removing the sample and hold block to reduce power. The third is a modified MDAC which can take rail-to-rail input swing to get an extra bit thus getting rid of a power hungry opamp. The fourth is a hybrid architecture which makes use of an asynchronous SAR ADC as the backend of a pipelined ADC to save power. Measurement and simulation results that prove the efficiency of the proposed techniques are presented. / Graduation date: 2009

This thesis presents circuit-level techniques for soft error mitigation, low-power design with performance trade-off, and variation-tolerant low-power design. The proposed techniques are divided into two broad categories. First, error compensation techniques, which are used for soft error mitigation and also for low-power operation of linear and non-linear filters. Second, a framework for variation tolerant low-power operation of wireless devices is presented. This framework analyzes the effects of circuit "tuning knobs" such as voltage, frequency, wordlength precision, etc. on system performance, and power efficiency. Process variations are considered as well, and the best operating tuning knob levels are determined, which results in maximum system wide power savings while keeping the system performance within acceptable limits. Different methods are presented for variation-tolerant and power-efficient wireless communication. Techniques are also proposed for application driven low-power operation of the OFDM baseband receiver.

Integrated systems with billions of transistors on a single chip are a now reality. These systems include multi-core microprocessors and are built today using deca-nanometer devices organized into synchronous digital circuits. The movement of data within such systems is regulated by a set of predictable timing signals, called clocks, which must be distributed to a large number of sequential elements. Collectively, these clocks have a significant impact on the frequency of operation and, consequently, on the performance of the systems. The clocks are also responsible for a large fraction of the power consumed by these systems. The objective of this dissertation is to better understand clock distribution in order to identify opportunities and strategies for improvement by analyzing the conditions under which the optimal tradeoff between power and performance can be achieved, by modeling the constraints associated with local and global clocking, by evaluating the impact of noise, and by investigating promising new design strategies for future integrated systems.

Orientador: Guido Costa Souza de Araújo / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Computação / Made available in DSpace on 2018-08-19T00:08:02Z (GMT). No. of bitstreams: 1 Yang_YunJu_M.pdf: 3101962 bytes, checksum: 3711cbf9c4db60e5d2938d566db0d87c (MD5) Previous issue date: 2011 / Resumo: A indústria de semicondutores sempre enfrentou fortes demandas em resolver problema de dissipação de calor e reduzir o consumo de energia em dispositivos. Esta tendência tem sido intensificada nos últimos anos com o movimento de sustentabilidade ambiental. A concepção correta de um sistema eletrônico de baixo consumo de energia é um problema de vários níveis de complexidade e exige estratégias sistemáticas na sua construção. Fora disso, a adoção de qualquer técnica de redução de energia sempre está vinculada com objetivos especiais e provoca alguns impactos no projeto. Apesar dos projetistas conheçam bem os impactos de forma qualitativa, as detalhes quantitativas ainda são incógnitas ou apenas mantidas dentro do 'know-how' das empresas. Neste trabalho, de acordo com resultados experimentais baseado num plataforma de SoC1 industrial, tentamos quantificar os impactos derivados do uso de técnicas de redução de consumo de energia. Nos concentramos em relacionar o fator de redução de energia de cada técnica aos impactos em termo de área, desempenho, esforço de implementação e verificação. Na ausência desse tipo de dados, que relacionam o esforço de engenharia com as metas de consumo de energia, incertezas e atrasos serão frequentes no cronograma de projeto. Esperamos que este tipo de orientações possam ajudar/guiar os arquitetos de projeto em selecionar as técnicas adequadas para reduzir o consumo de energia dentro do alcance de orçamento e cronograma de projeto / Abstract: The semiconductor industry has always faced strong demands to solve the problem of heat dissipation and reduce the power consumption in electronic devices. This trend has been increased in recent years with the action of environmental sustainability. The correct conception of an electronic system for low power consumption is an issue with multiple levels of complexities and requires systematic approaches in its construction. However, the adoption of any technique for reducing the power consumption is always linked with some specific goals and causes some impacts on the project. Although the designers know well that these impacts can affect the design in a quality aspect, the quantitative details are still unkown or just be kept inside the company's know-how. In this work, according to the experimental results based on an industrial SoC2 platform, we try to quantify the impacts of the use of low power techniques. We will relate the power reduction factor of each technique to the impact in terms of area, performance, implementation and verification effort. In the absence of such data, which relates the engineering effort to the goals of power consumption, uncertainties and delays are frequent. We hope that such guidelines can help/guide the project architects in selecting the appropriate techniques to reduce the power consumption within the limit of budget and project schedule / Mestrado / Ciência da Computação / Mestre em Ciência da Computação

Indiana University-Purdue University Indianapolis (IUPUI) / A novel method of power management and sequential monitoring of several sensors is proposed in this work. Application specific integrated circuits (ASICs) consisting of analog and digital sub-systems forming a system on chip (SoC) has been designed using complementary metal-oxide-semiconductor (CMOS) technology. The analog sub-system comprises the sensor-drivers that convert the input voltage variations to output pulse-frequency. The digital sub-system includes the system management unit (SMU), counter, and shift register modules. This performs the power-usagemanagement, sensor-sequence-control, and output-data-frame-generation functions. The SMU is the key unit within the digital sub-system is that enables or disables a sensor. It captures the pulse waves from a sensor for 3 clocks out of a 16-clock cycle, and transmits the signal to the counter modules. As a result, the analog sub-system is at on-state for only 3/16th fraction (18 %) of the time, leading to reduced power consumption. Three cycles is an optimal number selected for the presented design as the system is unstable with less than 3 cycles and higher clock cycles results in increased power consumption. However, the system can achieve both higher sensitivity and better stability with increased on-state clock cycles. A current-starved-ring-oscillator generates pulse waves that depend on the sensor input parameter. By counting the number of pulses of a sensor-driver in one clock cycle, a sensor input parameter is converted to digital. The digital sub-system constructs a 16-bit frame consisting of 8-bit sensor data, start and stop bits, and a parity bit. Ring oscillators that drive capacitance and resistance-based sensors use an arrangement of delay elements with two levels of control voltages. A bias unit which provides these two levels of control voltages consists of CMOS cascade current mirror to maximize voltage swing for control voltage level swings which give the oscillator wider tuning range and lower temperature induced variations. The ring oscillator was simulated separately for 250 nm and 180 nm CMOS technologies. The simulation results show that when the input voltage of the oscillator is changed by 1 V, the output frequency changes linearly by 440 MHz for 180 nm technology and 206 MHz for 250 nm technology. In a separate design, a temperature sensitive ring oscillator with symmetrical load and temperature dependent input voltage was implemented. When the temperature in the simulation model was varied from -50C to 100C the oscillator output frequency reduced by 510 MHz for the 250 nm and by 810 MHz for 180 nm CMOS technologies, respectively. The presented system does not include memory unit, thus, the captured sensor data has to be instantaneously transmitted to a remote station, e.g. end user interface. This may result in a loss of sensor data in an event of loss of communication link with the remote station. In addition, the presented design does not include transmitter and receiver modules, and thus necessitates the use of separate modules for the transfer of the data.