Bartending makes for an interesting case study in that it brings together research on emotional labor and tipped front-line service jobs, as well as the contemporary increase in precarity in work and precarity in life. This project explores the material and identity processes of bartending, examining how a precarious job with high expectations of emotional labor in-turn affects the occupational and personal identities of those employed in the industry. Overall three overarching themes were identified: (1) When wages are outsourced to customers via tipping systems workers are exposed to particularly high emotional demands, rendering bartending a unique form of quid pro quo emotional labor. (2) Bartenders exist in a “default career” mode of employment that is stigmatized for being low-status low-skilled labor. (3) Performing emotional labor and managing stigma creates a divergence between bartender’s personal and occupational identities resulting in constant identity work on and off the job. / Includes bibliography. / Thesis (M.A.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

The compatibility of on-site consumption alcohol outlets as land use is predicted by the acceptance level of the utility or disutility they enjoy amongst residents in a neighbourhood. The density of alcohol outlets is argued in literature as correlating to the significant positive rate of amenity effects that include property crime, alcohol related arrests, drunk-driving, fatal and severe alcohol-induced accidents, violence and assault amongst many others. The problems associated with on-site consumption alcohol outlets have been insistently brought to the attention of the Umjindi Local Municipality in the Ehlanzeni District area in Mpumalanga Province by the residents of the Emjindini neighbourhood. The study is based on the hypothesis that the high density of on-site consumption alcohol outlets contributes to the incompatibility of such outlets with residential areas. In addressing the research sub-questions and validating the research hypothesis, the study adopted various methods (including land use surveys, interviews, administration of questionnaires, literature review and document review) for the collection, analysis, interpretation and discussion of data. The study reveals that the higher density of alcohol consumption outlets is significant in areas of low socioeconomic status. The Emjindini Townships are located with the density of 1 on-site consumption alcohol outlet per 263 people. Liquor legislation in South Africa leaves a lot to be desired in its guidelines for alcohol outlet density, public participation, location radius and local authority involvement. In addition, our findings showed that the significantly unacceptable level of impact thereof is experienced especially in the night, in areas characterised by the high density of on-site consumption alcohol outlets. The on-site consumption alcohol outlets are seen as compatible land uses in residential areas for the reason that, the unacceptable level of impact is insignificant during the day. The adoption of preferred and practical guidelines related to the locality and density of on-site consumption alcohol outlets, compatibility performance standards and public participation are recommended for policy and practice. The amendment to the liquor law is subsequently proposed in this study. / M.U.R.D.P. University of KwaZulu-Natal, Durban 2014.

Os monoalquil carbonatos podem ser vistos como produtos da hidrólise parcial de carbonatos orgânicos. Apesar de serem estudados desde a década de 1920, a literatura apresenta poucas evidências de sua formação em meio aquoso. Recentes estudos apontaram a eletroforese capilar (CE) com detecção condutométrica sem contato (C4D) como uma técnica versátil para a detecção e quantificação dessas espécies, a partir da qual foi possível evidenciar a formação de monoalquil carbonatos pela reação direta entre o bicarbonato e o álcool correspondente. A presença de monoetil carbonato (MEC) em amostras de cerveja foi demonstrada pela primeira vez no presente trabalho, bem como sua formação em drinks preparados a partir de uma bebida alcoólica destilada e um refrigerante. Um equipamento de CE com dois detectores do tipo C4D foi utilizado para a identificação e a quantificação dessa espécie, principais objetivos do presente trabalho. Uma propriedade intrínseca à detecção condutométrica - o fato de a resposta do detector estar, sob certas condições, exclusivamente relacionada às mobilidades dos compostos presentes - permitiu aquantificação do MEC apesar da impossibilidade de fazê-lo por meio de calibração externa, dada a sua instabilidade em meio aquoso. O método de quantificação, que utiliza como padrões de calibração do detector cinco soluções de espécies estáveis com mobilidades eletroforéticas próximas à do MEC, foi aplicado na determinação de tricloroacetato em solução aquosa e os resultados obtidos condizem com a concentração da espécie determinada por titulação. As concentrações de MEC encontradas em uma amostra de cerveja do tipo lager e em um drink de rum com refrigerante de cola foram 1,2 mmol.L-1 e 4,1 mmol.L-1, respectivamente. Esses valores concordam com as quantidades esperadas de MEC nessas bebidas com base em suas concentrações de álcool e bicarbonato. Apesar dos estudos prévios sugerirem a formação lenta de MEC após a mistura do bicarbonato com o etanol, o preparo dos três drinks estudados mostrou rápida formação de MEC logo após a mistura dos ingredientes. Estudos envolvendo a cinética de formação da espécie em diferentes valores de pH foram realizados, evidenciando maiores velocidades de formação em condições ácidas (pH 4) quando comparadas com condições básicas (pH 8). Pôde-se concluir que, apesar de as condições ácidas favorecerem o desprendimento de CO2 do sistema, deslocando o equilíbrio no sentido da decomposição do MEC, a formação da espécie também ocorre em sistemas ácidos. Além disso, o tempo necessário para a sua formação nesses sistemas condiz com a escala de tempo necessária para o preparo e o consumo dos drinks. Apesar de o presente trabalho ser o primeiro relato da existência de MEC em alimentos, bebidas como a cerveja são consumidas há milênios, sugerindo a baixa probabilidade de a espécie estudada ser nociva. Pouco se sabe, no entanto, a respeito do seu papel no sabor das bebidas estudadas e na absorção do álcool pelo organismo. / The monoalkyl carbonates can be treated as products of the partial hydrolysis of organic carbonates. Despite they are studied since late 1920\'s, the literature shows little evidence about their formation in aqueous media. Recent studies point the capillary electrophoresis (CE) with capacitively coupled contactless conductivity detection (C4D) as a versatile technique for the identification and determination of these species, showing their formation from the direct reaction between bicarbonate and the corresponding alcohol. The presence of monoethyl carbonate (MEC) in beer is demonstrated for the first time, as well as the formation of this species in drinks prepared with a distilled beverage and a carbonated soft drink. A CE equipment with two C4D detectors was used to identify and quantify this species in cited beverages, the main objectives of the present work. An intrinsic property of the conductometric detection made possible the determination of MEC in spite of the impossibility to quantitate it by external calibration due to its stability issues in aqueous media. The quantitation method, which uses five solutions of stable species with similar electrophoretic mobilities to the analyte, was applied in the determination of trichloroacetate in aqueous solution and the results were in agreement with the concentration obtained by titration. The concentrations of MEC in samples of lager beer and rum and cola drink were, respectively, 1.2 mmol.L-1 and 4.1 mmol.L-1, which agree with the levels of ethanol and bicarbonate available in these products. Although the previous studies suggests the formation of a small amount of MEC right after the mixing of bicarbonate with ethanol - that grows over time - the three studied cases showed a fast formation of MEC after the mixing of the ingredients of the drinks. Studies about the formation kinetics in two different pH values were made showing higher formation rates for acidic media when compared with alkaline media. One can conclude that although the acidic conditions favor the loss of CO2, shifting the equilibrium toward the decomposition of MEC, the species formation also occurs in acidic media. Besides, the required time for its formation in these systems matches the time scale needed for the preparation and the consumption of the drink. Although the present study is the first report of MEC existence in food, beverages like beer have been consumed for a long time, suggesting the low probability of its harmful potential. There are, however, little knowledge about its role in flavoring and alcohol absorption in the body.

Thesis (MComm)--Stellenbosch University, 2008. / ENGLISH ABSTRACT: The tobacco industry of South Africa has fallen under strict legislation and control measures from the South African government since the passing of the initial Tobacco Products Control Act, 1993. Further amendments have been made to the initial act, namely Tobacco Products Control Amendment Act, 1999 and the proposed Tobacco Products Control Amendment Bill, 2004. This assignment emerges against the backdrop of the alcoholic beverage industry coming under similar scrutiny to that of the tobacco industry from government legislation and control measures The main objective of this assignment was to discover the similarities, if any, between the tobacco industry and the alcoholic beverage industry of South Africa, specifically with regard to their advertising practices before legislation. The purpose of this assignment is to discover whether or not the alcoholic beverage industry can learn from the example of the tobacco industry in order to maintain its self-regulation, rather than to fall under the control of State regulation and legislation. The literature and empirical study sought to achieve the following four objectives: 1.) To gain a thorough understanding of the tobacco legislation on a global scale; 2.) To analyse the control measures and legislation of tobacco in a South African context; 3.) To identify any similarities between the tobacco industry and alcoholic beverage industry of South Africa and 4.) To identify means in which the alcoholic beverage industry can work with the State in order to maintain the self-regulation of its industry. Findings indicate that similarities arise when comparing tobacco and alcohol, as both of them have addictive qualities, are often used from a very young age and both have laws prohibiting sale to minors. The success gained in South Africa with regard to anti-tobacco initiatives and government legislation since the introduction of the first Tobacco Act in 1993, has led to certain members of society feeling that similar, if not the same, strict strategies and / or legislative measures should be used to address the public health problems relating to alcohol. / AFRIKAANSE OPSOMMING: Die Suid-Afrikaanse tabaknywerheid val onder streng wetgewing en beheermaatreëls deur die Suid-Afrikaanse regering sedert die aanvanklike Wet op die Beheer van Tabakprodukte, 1993 aanvaar is. Verdere wysigings op die aanvanklike wet is aanvaar, naamlik die Wysigingswet op die Beheer van Tabakprodukte, 1999 en die voorgestelde Wysigingswetsontwerp op die Beheer van Tabakprodukte, 2004. Hierdie werk spruit voort teen die agtergrond van die alkoholdranknywerheid wat onder 'n soortgelyke soeklig geplaas is as die tabaknywerheid by wyse van regeringswetgewing en beheermaatreëls. Die hoofoogmerk van hierdie werk was om die ooreenkomste, indien enige, vas te stel tussen die tabaknywerheid en die alkoholdranknywerheid van Suid-Afrika, spesifiek met betrekking tot hul adverteringspraktyke vóór wetgewing. Die doel van hierdie werk was om vas te stel of die alkoholdranknywerheid uit die voorbeeld van die tabaknywerheid kan leer aldan nie, met die oog op die voortsetting van sy selfbeheer, eerder as om onder die beheer van Staatsregulering en wetgewing te val. Die bronmateriaal en empiriese studie was daarop toegespits om die volgende vier doelwitte te bereik: 1.) Om 'n behoorlike begrip te verkry van tabakwetgewing op 'n globale skaal; 2.) Om die beheermaatreëls en wetgewing oor tabak in 'n Suid-Afrikaanse konteks te analiseer; 3.) Om enige ooreenkomste tussen die tabak- en die alkoholdranknywerheid in Suid-Afrika te identifiseer en 4.) Om wyses te identifiseer waardeur die alkoholdranknywerheid met die Staat kan saamwerk om die selfbeheer van die nywerheid te behou. Bevindinge dui aan dat ooreenkomste wel ontstaan wanneer tabak en alkohol met mekaar vergelyk word, veral omdat albei verslawende eienskappe bevat, dikwels deur persone vanaf 'n baie jong ouderdom gebruik word en dat wetgewing albei verbied om aan minderjariges verkoop te word. Die sukses wat in Suid-Afrika rakende anti-tabakinisiatiewe en wetgewing behaal is sedert die inwerkingstelling van die eerste Wet op die Beheer van Tabak in 1993 het daartoe gelei dat sekere lede van die gemeenskap van mening is dat soortgelyke, indien nie dieselfde nie, streng strategieë en/of wetgewende maatreëls aangewend behoort te word om die openbare gesondheidsprobleme rakende alkohol aan te spreek.

Indiana University-Purdue University Indianapolis (IUPUI) / Accurate estimation of alcohol price elasticity is important for policy analysis – e.g.., determining optimal taxes and projecting revenues generated from proposed tax changes. Several approaches to specifying and estimating the price elasticity of demand for alcohol can be found in the literature. There are two keys to policy-relevant specification and estimation of alcohol price elasticity. First, the underlying demand model should take account of alcohol consumption decisions at the extensive margin – i.e., individuals' decisions to drink or not – because the price of alcohol may impact the drinking initiation decision and one's decision to drink is likely to be structurally different from how much they drink if they decide to do so (the intensive margin). Secondly, the modeling of alcohol demand elasticity should yield both theoretical and empirical results that are causally interpretable. The elasticity estimates obtained from the existing two-part model takes into account the extensive margin, but are not causally interpretable. The elasticity estimates obtained using aggregate-level models, however, are causally interpretable, but do not explicitly take into account the extensive margin. There currently exists no specification and estimation method for alcohol price elasticity that both accommodates the extensive margin and is causally interpretable. I explore additional sources of bias in the extant approaches to elasticity specification and estimation: 1) the use of logged (vs. nominal) alcohol prices; and 2) implementation of unnecessarily restrictive assumptions underlying the conventional two-part model. I propose a new approach to elasticity specification and estimation that covers the two key requirements for policy relevance and remedies all such biases. I find evidence of substantial divergence between the new and extant methods using both simulated and the real data. Such differences are profound when placed in the context of alcohol tax revenue generation.

Indiana University-Purdue University Indianapolis (IUPUI) / The objective of this research is to examine the development of the California alcohol outlets over time and the relationship between neighborhood characteristics and densities of the alcohol outlets. Two types of advanced analyses were done after the usual preliminary description of data. Firstly, fixed and random effects linear regression were used for the county panel data across time (1945-2010) with a dummy variable added to capture the change in law regarding limitations on alcohol outlets density. Secondly, a Bayesian spatio-temporal Poisson regression of the census tract panel data was conducted to capture recent availability of population characteristics affecting outlet density. The spatial Conditional Autoregressive model was embedded in the Poisson regression to detect spatial dependency of unexplained variance of alcohol outlet density. The results show that the alcohol outlets density reduced under the limitation law over time. However, it was no more effective in reducing the growth of alcohol outlets after the limitation was modified to be more restrictive. Poorer, higher vacancy rate and lower percentage of Black neighborhoods tend to have higher alcohol outlet density (numbers of alcohol outlets to population ratio) for both on-sale general and off-sale general. Other characteristics like percentage of Hispanics, percentage of Asians, percentage of younger population and median income of adjacency neighbors were associated with densities of on-sale general and off sale general alcohol outlets. Some regions like the San Francisco Bay area and the Greater Los Angeles area have more alcohol outlets than the predictions of neighborhood characteristics included in the model.

Thesis (D. Tech.) -- Central University of Technology, Free State, 2008 / The purpose of this study was to evaluate brewing and consumption practices and to screen for micro-organisms and mycotoxins associated with traditional beer produced and consumed in the marginal urban settlements of the city of Kimberley in the Northern Cape Province of South Africa. The survey study revealed that traditional beer is no longer being brewed for traditional purposes only, as was the case in the past, but rather for commercial gain. Both brewers and consumers, however, appeared to be largely unaware of disease-causing micro-organisms present on the hands or bodies of handlers that can be transferred to the beverage during the handling process, and were seemingly not conversant with regard to the effects of hazardous ingredients sometimes incorporated during the brewing process. Unemployment and a lack of education emerged as pivotal factors related to the production of traditional beer and the ignorance of the associated safety thereof. The survey further indicated that although facilities such as the availability of potable water (taps in yards) and flushing toilets were sometimes in place, other facilities such as basins with hot running water were often not available. In commercially produced and homebrewed traditional beer the mean counts for total coliforms and Staphylococcus spp. were circa 105 cfu.ml-1 whereas the TVC (Total Viable Counts) and total fungi counts were 106 and 107 cfu.ml-1 respectively. The total coliforms and Staphylococcus spp. counts for homebrewed traditional beer were approximately one log-phase higher than the commercial version. The counts in the homebrewed beer probably originated from contamination during handling, while in the commercial product contamination originated either in the raw ingredients or during postprocessing and consumption. Apart from staphylococci, considerable numbers of total coliforms indicating faecal contamination were noted. A rapid, easy, reliable and accurate technique that could be used to quantify the level of mycotoxins (deoxynivalenol and citrinin) in the beer was developed through validation of the ELISA Ridascreen methodology. Using this method, the deoxynivalenol (DON) level in the beer samples was found to exceed the recommended levels suggested by the European Union, while citrinin levels in the samples varied between 35.6 ppb and 942.2 ppb. In the case of citrinin there were statistically significant differences between spring, summer and winter samples, confirming the seasonal impact on fungal growth and consequent mycotoxin production. An R2-value of 0.409 was noted between DON and citrinin, indicating a weak positive association. Finally, an awareness programme in the format of a poster with accompanying subscripts was developed to address issues of safety and hygiene of traditional beer in the study area. The poster utilises animatedstyle colour images of selected practices that need to be addressed, accompanied by slogans summarising the particular image in English, Afrikaans and Setswana. It is envisaged that, as part of a comprehensive awareness programme, the poster will contribute greatly to the quality, safety and promotion of traditional beer in the area.

PhD (Food Science) / Department of Food Science and Technology / Finger millet (FM) [Eleusine coracana] is an underutilised cereal grain used as a food source in South Africa. Increased research interest in FM has span over the years owing to its unique nutritional and bioactive composition. Following the recent interest in natural curative substances over their synthetic counterparts in the treatment of food dependent diseases, FM has shown potential nutraceutical effects. Some important health effects like antidiabetic, antioxidative, anti-inflammatory and antimicrobial properties have been reported in recent trials with FM. In view of the increasing utilisation and application of FM in the region of Thulamela Municipality, Vhembe District of South Africa, two common indigenous FM varieties (brown and dark brown) were obtained and analysed for their physicochemical properties, levels of minerals, phytic acid, phenolic compounds and antioxidant activities. For this process, malted non-alcoholic beverages were produced and analysed for their physicochemical properties, levels of phenolic compounds, and total phenolics and antioxidant activities. FM grains were soaked, germinated and kilned at an interval of 24 h for 96 h, using sorghum as an external reference. Mineral composition of the FM and sorghum samples were analysed using an inductively coupled plasma atomic emission spectroscopy (ICP-AES) and mass spectroscopy (ICP-MS), and atomic absorption spectrometer (AAS). Identification and quantification of phenolic compounds were performed using ultra-performance liquid chromatography mass spectrometer (UPLC-MS). All experiments were performed in triplicate except for the UPLC-MS analysis of the malted non-alcoholic beverages that was done in duplicate. Data were analysed by one way analysis of variance, and the mean values were separated by Duncan’s multiple comparison test using SPSS version 24.0. Data showed that the FM varieties were rich in macro- and micro- or trace elements. The macro-elements calcium, magnesium, potassium, phosphorus and sulphur were found in high amounts ranging from 1597.37 mg/ kg – 6775.03 mg/ kg; iron, zinc, strontium and silicon were found in significant amounts in the range 21.47 mg/ kg – 55.67 iii mg/ kg, copper and boron were found in low amounts (2.2 mg/ kg – 7.7 mg/ kg), along with selenium and cobalt (0.02 mg/ kg – 0.05 mg/ kg). Heavy metals, barium and aluminium were found in the FM varieties. Varietal difference was found to play an important role in the mineral content of the grains during malting. Malting for 24 h reduced mineral content except for sodium. Beyond 48 h of malting, mineral content increased, particularly, for 96 h in FM grain malt. Significant (p < 0.05) increases in the mineral content of FM varieties were noted at 48 h and 96 h of malting. Increase occurred at 72 h of malting for potassium, iron and boron. Malting did not have any effect on the manganese content of the dark brown FM; however, it increased the manganese content at 48 h of malting for brown FM. Malting for 96 h significantly (p < 0.05) reduced sodium content. Consecutive decrease in phytic acid content of the grains was not recorded with durations in malting time. Although statistically significant differences (p < 0.05) were observed, malting did not result in too much change in the physicochemical properties of the grains. Several flavonoids, catechin, epicatechin, quercetin, taxifolin, and hesperitin were isolated, whilst protocatechuic acid was the only phenolic acid detected in the unmalted and malted FM. Increases in catechin, epicatechin and protocatechuic acid were observed for 72 and 96 h malt of brown FM with similar observations recorded for sorghum. Complete loss of taxifolin, catechin, and hesperitin were noted with malting time. FM grains exhibited 2, 2-diphenyl-1-picrylhydrazyl (DPPH), 2, 2՛-azinobis-3-ethylbenzthiazoline-6-sulfonic acid (ABTS) radical scavenging action and iron reducing activities. Increased iron reducing activity alongside ABTS radical scavenging activity was recorded with malting time. A fermentation-time dependent decrease in the pH of the non-alcoholic beverages, with a corresponding increase in sugar content were recorded. A similar decrease was also recorded for the viscosities of the beverages. The FM malt beverages were found to contain a higher amount of citric acid compared to the sorghum malt beverage. A decrease in the citric acid content with fermentation time was noted in the grain malt beverages fermented with Lactobacillus fermentum, particularly for the iv FM beverage. The phenolic compounds detected in the FM malt beverages fermented with the grain microbial flora and Lactobacillus fermentum were protocatechuic acid, catechin and epicatechin. Taxifolin and kaempferol along with the earlier mentioned compounds were detected in the sorghum malt beverage. Catechin was found in higher amount compared to other phenolic compounds in the FM and sorghum malt beverages. FM malt beverages were found to contain a higher amount of total phenolics compared to the beverage prepared from sorghum malt. Fermentation with the grains’ microbial flora and L. fermentum resulted in reduced total phenolics of FM and sorghum malt beverages, particularly after 24 h of fermentation. A fermentation-time dependent decrease in total phenolics of FM beverages fermented with L. fermentum was noted. Fermentation within 24 - 48 h using the grain microbial flora showed higher total individual phenolic compounds for the dark brown FM and sorghum, compared to other fermentation periods. Fermentation of the beverages for 24 h retained a higher amount of the total phenolics compared to other fermentation periods, especially for the L. fermentum beverages. Reduced total phenolic content and antioxidant activity of the beverages were noted at 24 h of fermentation for the two microbial sources. Significant (p < 0.05) increases in total phenolics were observed within 72 – 96 h of fermentation of the brown FM malt beverage with the grains’ microbial flora. Fermentation for 72 h and 96 h with L. fermentum increased the total phenolic content of the brown FM. Increase in total flavonoid content (TFC) of brown FM malt beverage was noted at 72 h fermentation for both microbial sources. Unlike with L. fermentum, no significant (p > 0.05) change in TFC was observed for the dark brown FM beverage after 24 h fermentation with the grains’ microbial flora. Beverages exhibited DPPH, ABTS radical scavenging action and iron reducing activities, which were significantly (p < 0.05) reduced at 96 h fermentation for both microbial sources. The 24 h fermented beverage retained a higher amount of total phenolic and flavonoid contents, and had higher antioxidant activity compared to other fermentation periods for both microbial sources. The study shows that FM is a rich source of essential minerals and v phenolic compounds, and demonstrates that 72 to 96 h of malting has a positive effect on minerals and certain phenolic compounds over the 48 h malting period widely used for preparation of FM malt. The presence of hesperitin in FM grain was established. A new method was developed for the production of FM non-alcoholic beverage with measurable amounts of health-promoting compounds. An ideal fermentation period (24 h) for FM malt non-alcoholic beverage production with enhanced health-promoting compounds, using Lactobacillus fermentum was demonstrated. Fermentation limit (96 h) for production of FM malt beverage using either the grain microbial flora or L. fermentum was confirmed. These findings provide a rationale for increased utilisation of FM as a functional food grain, and its use as malt in production of non-alcoholic beverage for health promotion and wellness. / NRF